Migration customization and system error

Similar Questions

• Cleaning disc does not remove "debug dump and system error memory dump files".

  Original title: clean windows vista disk

  on my drive clean I have 112 mb on the debug dump files and 112 mb on system error memory dump files. My problem is when I try to delete these files from my cleaning disc will not remove these files. could help me with this problem?

  Hello

  1. what happens when you try to delete the files of debugging bump?

  2. do you get any error code or error message?

  3. have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Start in safe mode and then try to perform a disk cleanup and check if it works.

  Step 1: Start Windows Vista in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Delete files using Disk Cleanup:

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Method 2:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows Vista system files: http://support.microsoft.com/kb/929833

  Also check the event viewer on the program that is causing the problem.

  Event Viewer is a tool that displays detailed information about important events on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Hope the information is useful.

• Computer XP has unexpected restarts and system error 1003 event ID 102

  I have a similar problem as my previous shows:

  Computer restarts without reason see or crashes.
  I already reinstalled the system on a whole new drive as restarting Thursday July 28 ended in an endless restart loop.
  Until yesterday, the clean system has been works well, but suddenly she has restarted.

  I tried to follow the input from Joselbarra, but I wasn't able to get a blue screen.
  The computer comes from the reboot.

  Fortunately, I have some images of memory I put logging into place when reinstalling.

  The last restart resulted in no error message in the system event log.

  So here's the information that I have collected:

  System of brand / model: it is a dimotion of old ditech under 4 (computer Austrian company HW and SW) AMD Sempron with 1 GB of memory and an additional graphics controller (I do not use one on board) running Windows XP Professional

  Config antivirus: Avira! (latest version, downloaded Friday, July 29, 2011) and Spybot Search & Destroy.

  It has 2 DVD players, it is a DVD from LG burner, the other is just a player.

  Version full bootable to Windows XP Professional, bought in 2007 at ditech with computer

  Rebooting the system is not reproducible on any action or command. It just ahappens occasionally.
  I got it twice yesterday and twice today, while the second time the computer has not created a dump of memory needed 3 restarts coming up again completely (first time it froze, second time I just see a black screen... need to press reset butten it rise again)

  He was never a BSOD, just a restart. Chicken even disabled this option in the settings startup and recovery.

  Here is the information of the msInfo32:

  Betriebssystemname Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Microsoft Corporation Betriebssystemhersteller
  SystemName
  Manufacturer of the Systemhersteller system
  Systemmodell system product name
  X 86 Systemtyp PC
  Processor x 86 family 15 model 95 Stepping 2 AuthenticAMD ~ 1803 Mhz
  Version of the BIOS/date Phoenix Technologies, LTD ASUS M2NPV - VM ACPI BIOS Revision 0801, 13.03.2007
  SMBIOS Version 2.4
  Windows-Verzeichnis G:\WINDOWS
  Systemverzeichnis G:\WINDOWS\system32
  Startgerat \Device\HarddiskVolume1
  Gebietsschema Österreich
  Hardwareabstraktionsebene Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  Benutzername
  Zeitzone Westeuropaische summer time
  Model realer Speicher 1.024,00 MB
  Rechtssicherheit realer Speicher 236,92 MB
  Virtueller model memory 2.00 GB
  Virtueller Rechtssicherheit Speicher 1.96 GB
  Big der Auslagerungsdatei 2.40 GB
  Auslagerungsdatei G:\pagefile.sys

  Hope it's ok to leave the German labels here, I think that you can easily find what they mean :-)

  Information about video drivers:

  Name NVIDIA GeForce 7300 GS
  PNP-Geratekennung PCI\VEN_10DE & DEV_01DF & SUBSYS_C4373842 & REV_A1\4 & D 13 46659 & 0 & 0020
  Adaptertyp GeForce 7300 GS, NVIDIA-compatible
  Adapterbeschreibung NVIDIA GeForce 7300 GS
  Adapter RAM 512,00 MB (536.870.912 bytes)
  Installierte Treiber nv4_disp.dll
  Treiberversion 6.14.10.9147
  File INF oem10.inf (section nv4_NV3x)
  Farbebenen 1
  Farbtabelleneintrage 4294967296
  Resolution 1680 x 1050 60 Hz x
  32 bits/Pixel
  Speicheradresse 0xFA000000-0xFCFFFFFF
  Speicheradresse 0xD0000000-0xDFFFFFFF
  Speicheradresse 0xFB000000-0xFBFFFFFF
  IRQ channel IRQ 16
  A-E-Port 0x000003B0-0x000003DF
  A-E-Port 0x000003C0-0x000003DF
  Speicheradresse 0xA0000-0xBFFFF
  Treiber g:\windows\system32\drivers\nv4_mini.sys (6.14.10.9147, 3.78 MB (3.958.496 bytes), 12.08.2006 06:42)

  The three dump files that I have are:

  ==================================================
  Dump file: Mini080111 - 01.dmp
  Crash time: 01.08.2011 07:10:46
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check code: 0 x 10000050
  Parameter 1: 0xb0bd1d34
  Parameter 2: 0x00000001
  Parameter 3: 0xbf802f5a
  Parameter 4: 0x00000000
  Caused by the driver: win32k.sys
  Caused by the address: win32k.sys + 2f5a
  Description of the file: Mehrbenutzer-Win32-Treiber
  Product name: operating system Microsoft® Windows®
  Company: Microsoft Corporation
  File version: 5.1.2600.6119 (xpsp_sp3_gdr.110602 - 1657)
  Processor: 32-bit
  Plant address: win32k.sys + 2f5a
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: G:\WINDOWS\Minidump\Mini080111-01.dmp
  Number of processors: 1
  Main version: 15
  Minor Version: 2600
  Empty the file size: 90.112
  ==================================================

  ==================================================
  Dump file: Mini073111 - 02.dmp
  Crash time: 31.07.2011 08:16
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check code: 0 x 10000050
  Parameter 1: 0xf8000003
  Parameter 2: 0x00000001
  Parameter 3: 0x804f8cd6
  Parameter 4: 0x00000000
  Caused by the driver: win32k.sys
  Caused by the address: win32k.sys + 24 b 3
  Description of the file: Mehrbenutzer-Win32-Treiber
  Product name: operating system Microsoft® Windows®
  Company: Microsoft Corporation
  File version: 5.1.2600.6119 (xpsp_sp3_gdr.110602 - 1657)
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 21cd6
  Stack address 1: win32k.sys + 24 b 3
  Stack address 2: win32k.sys + 2f68
  Battery 3 address: win32k.sys + 3763
  Computer name:
  Full path: G:\WINDOWS\Minidump\Mini073111-02.dmp
  Number of processors: 1
  Main version: 15
  Minor Version: 2600
  Empty the file size: 90.112
  ==================================================

  ==================================================
  Dump file: Mini073111 - 01.dmp
  Crash time: 31.07.2011 08:11:56
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check code: 0 x 10000050
  Parameter 1: 0xa5e4d820
  Parameter 2: 0x00000001
  Parameter 3: 0x8055e695
  Parameter 4: 0x00000000
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 87695
  Description of the file: kernel NT und-system
  Product name: operating system Microsoft® Windows®
  Company: Microsoft Corporation
  File version: 5.1.2600.6055 (xpsp_sp3_gdr.101209 - 1647)
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 87695
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: G:\WINDOWS\Minidump\Mini073111-01.dmp
  Number of processors: 1
  Main version: 15
  Minor Version: 2600
  Empty the file size: 90.112
  ==================================================

  Hope someone can help nail down the problem.

  I downloaded them on my Skydrive so you need them too.

  Let me know if you need anything else for that to be resolved.

  BTW: if I remember well first numbers started with installation and download of Service Pack 3, which led to the system now crashes and restarts.

  Thanks for any help you can provide

  Ondrej

  Hi all, thanks for your help and comments.

  As mentioned earlier, I gave to buy a new graphics to try and since then I have no problem with that. No unexpexted start again. But now I have problems with the audio driver... but it's a driver problem I guess, not MSWinXP :-)

  y2kim, I'll upload the files you mentioned, as for.

  Once again, thank you for the help and advice.

  VARO

  Ondrej

• Windows install error 2203 and system error 2147023504

  When I try to download programs I get error messages saying: MICROSOFT SQL SERVER 2008 NATIVE CLIENT - Setup has encountered an unexpected error and.  The error code is 2203. Database: C:/Windows/Installer/158445.ipi - cannot open the database file - system 2147023504 error

  Hello

  ·        What program are you trying to install on the system?

  Method 1:

  I suggest to follow the steps mentioned in the article below and try to install the program again and check if you are able to install the program without any problem or not.

  Note: This article applies to the Office application, but you can follow the steps, and then try to install the program on the system and check.

  You receive an "error 2203. An internal error has occurred"when you install Microsoft Office on Windows Vista

  http://support.Microsoft.com/kb/2000547

  Method 2:

  You can rename the file 158445.ipi to the former and then checks to see if you are able to install the application on the system. Follow the steps mentioned below to rename the file.

  a. click on Start menu and type run in the search box start and press to enter.

  b. in the run box, type setup, and then on enter.

  c. the Setup window will open and locate the file 158445.ipi and rename it to 158445.old and the tyre to install the application and check.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Tecra 8100 system error when using Bank B

  Hello

  I get Bluscreens and system errors when you use Bank B. When you use Module1 in the Bank, everything is ok. When the same module as Bank A Bank (Bank A + B) b, I get errors.

  So, what would it be? What I have to 'turn on' the use of BANK B anywhere or not it looks like its defekt?

  Thanks for any help

  Hello

  Well, you must replace the motherboard if the memory bank has a defect. In this case, the only good way to connect with the service partner. They might give you detailed information.

  Good bye

• Delete or not; "System error Memory Dump Files" & "Debug dump files" in the Windows 7 disk cleanup program

  I am new to Windows 7, 64-bit OS and making the disk cleanup program. There are 2 unfamiliar topics with boxes to check what are the "Debug Dump Files" and "system error memory dump files.  I'm naïve as to what are these files and whether they contain all files that possibly should not be deleted.  Can anyone say and find out about what are the debug files and system error Memory Dump and if; Should I or not the check their boxes to get rid of all these files in particular type box?  Or could there be some Debug files & system error Memory Dump that might be of some importance and should not be deleted?

  Thank you for your time and any comments on this would be greatly appreciated.  Have a nice weekend.

  Tom R

  One good thing about Windows Disk Clean up is, only offer files delete them it is safe and will not harm your PC. Files of system errors and debugging dump files are created when there is an error in your system, and it creates a dump file that could be used for analyses. That say if you encounter blue screen error, dump file will create and if you find analysis you of cause of this problem. Whether or not you want to remove, you, some people will delete it only while others will keep the Explorer themselves later. But more importantly, it is wise to report them to Microsoft before deleting.

  To do this, open Control Panel and click under Maintenance contract and Action Center, click Check for solutions then it will collect all the information related to the errors and dump files and he could ask permission to send them and if you great permission, they will be sent. Once it was successful you can delete them.

  Sending the Microsoft dump files is a good idea, because there are teams who revisit and they try to find the cause and resolve it through Windows Update, or inform you about the possible solution in the center of the Action.

• Satellite A100 - unrecoverable system error and restart

  Without warning my Satellite A100 don't close but reboot, I removed the auto reboot, and the error that is displayed in the BSOD is:

  STOP: c000021a {fatal system error}
  The Windows Logon Process system process ended unexpectedly with status 0xc0000000 (0x00000000 0 x 0000000)

  in the event where Viewer does not appear anything on the error, I tried a system restore but it cannot exercise, in the event viewer this time it is written that he cannot run because the PC is not turned off regularly,
  How can I do?
  The BSOD appear in the last stop after the color screen when turned on the black screen just before the
  Turn off the power.

  your
  Fabio

  Hi flottero,

  It of always a little difficult to discuss these blue screens because many things could be the reason, but in most cases it s a hardware or driver problem.

  If system restore doesn't work, can you try to restore Windows recovery disk settings, please? After that, you get back factory settings and so you can identify a hardware problem or software.

  Check this box!

• Error - an internal system error has occurred. Please see DXError.log and DirectX.log, during the installation of DirectX.

  Original title: DirectX will not install.

  I blew on it this time, and I completely uninstalled DirectX to attempt to clean install it. Now, it will not install. I get the error "an internal system error has occurred. Please refer to the DXError.log and DirectX.log. "I try to install it again.
  I can't find these two newspapers anywhere, and I'm not 100% sure what to do.

  Hello TheAwesomeJoey,

  Click on item below and follow the instructions to install DirectX.

  Ko ID of Article: 179113 -how to download and install DirectX
  If this does not help, then I suggest that run you a SFC scan to see if there are corrupted files.
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  Then try to reinstall DirectX.
  Please answer back with an update on if it solves your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• After upgrading RAM, computer stops and gives error when restarting: "DISK BOOT FAILURE, INSERT SYSTEM DISK".

  Original title : OFFICE XP STOPS (MESSAGE of ERROR)

  I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK". I just added more memory to my 512 RAM. I USED MY XP TO REBOOT DISC, BUT THERE ARE ALWAYS AFTER PRESSING THE KEY 'R '. ONCE IT STARTS AND SE PAST JUST STOPS AND THE ERROR MESSAGE IS POSTER AGAIN UPWARD. I HAVE THE SAME 'MSCONFIGED' IT NORMAL TO SELECTIVE. I WAS ABLE TO GET INTO SAFE MODE, BUT NOW IT WON'T. I GET JUST THE ERROR MESSAGE.       > WHAT AM I DOING WRONG

  Hello

  You can view these methods:

  Method 1: As a first step, check to see if the hard disk becomes detected or listed in the Basic Input/Output system (BIOS). Also, be sure to change the boot order in the CMOS settings so that thehard drive is the first on the list.

  Note: To learn how, see the documentation provided with your computer or contact the manufacturer of your computer.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Method 2: If the manufacturer has installed the Recovery Console on your computer, perform the check disk to fix this.

  At the recovery console command line, type:

  Chkdsk /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information, see:

  How to perform disk error checking in Windows XP

  Chkdsk

• PC Hung and will now restart not [XP Pro SP3]. SYS error at startup as follows; Lsass.exe - system error. The endpoint Format is invalid.

  Original title: PC Hung and will now not restart not [XP Pro SP3]

  PC Gardner - [open Excel, open outlook, being viewed in PDF and word doc being edited].

  Restarted, then - loading SYS error window at startup as follows; lsass.exe - system error. The endpoint Format is invalid.

  Can not very well, or at the end of the message have to turn it off. Tried to reboot several times, same result.

  Just before this happened was a dialogue window appear on my PC, which indicates that Microsoft wanted to investigate problems of software they had observed on my PC that I had not sent the reports to. I approved this request and they took the reports...

  Am currently bimbling turn of safe mode with networking.

  Any smart people able to help me please?

  Thanks George

  Hello

  We will try these steps and check.

  Step 1: Try using some know last good configuration and check.

  Step 2: System Restore from safe mode or safe mode with network.

  Reference:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• I am getting system error 25004 and 1073422306 when I try to download trial versions

  I am getting system error 25004 and 1073422306 when I try to download trial versions

  Hello

  1. do you get this error trying to download or anything when trying to install the trial software?
  2. what software in trial version you are trying to download?
  3. What is the exact error message?
  4. what browser do you use?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• ITunes will not uninstall. "ITunes error 1714 and 1613 system error product or 1612." What should I do?

  QuickTime and iTunes will not update.  I have windows xp and tried to update quicktime and iTunes.  I don't seem to have any problems with iTunes, but it worries me that my computer won't up grade to iTunes 10.2.  Even more troubling, is that iTunes can not be uninstalled.  I get a message "iTunes old version cannot be deleted?  Product iTunes error 1714 and 1613 system error or 1612 ".  I tried to uninstall iTunes and get the same message.  If iTunes won't uninstall there must be a problem.  What should I do?

  Hi Thomas.collins,
   
  Here are some articles that might help you:
   

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  Problem installing iTunes or QuickTime for Windows

• Code error WinDef 8050800c and system restore Error 80070002 are related

  Hi all

  During the last weeks of twoo many discussion happened for WinDef - and MSE-error 8050800c.  The problem known inside this WInDef cannot scan or update at required intervals, created havoc and thousands of users are complaining about and at the same time try to find a solution.

  I am one of those users.  The question is not only that MS has not come up with a fix, but also this WinDef exhibits strange behavior.  Strange in a sense that one day working and the other is not.

  At the same time, people started having problems with the system restore in Vista, where everything is working correctly, except for the fact that the system will be back on the date indicated, coming with a notification "unknown error" and an error code 80070002.

  I am one of those users too.  Looking around the solutions both almost simultaneously and recent issues that hit my pc, I found that the solutions proposed by the MS people are circling around the keys to register ProfileImage.

  These questions are treated as separate issues, I think they are related.  For example, in this forum, regarding the error of WinDef a solution has been proposed recently around the ProfileImage.

  But a similar thing has been proposed by MS team, study the problems of SR points.

  Please see these links.

  WinDef: http://social.answers.microsoft.com/Forums/en-US/msescan/thread/a5810b32-5470-46aa-8be4-634f06064131

  System Restore/backup: http://blogs.technet.com/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx

  I appreciate your point of view and a possible solution to these two problems please.  Note that I already checked my ProfileImage values.  Well, all are created, except for a key that is where it seems completely empty.

  Thank you very much in advance.

  TrDo.

  Hello

  Thanks for the information; your efforts are very much appreciated.

  This happens when the Windows Vista Restore Wizard cannot access the files due to access denied or restore points missing or damaged.

  To restore the computer to a previous state, make sure that there are no corrupt restore points and backup Windows and Volume shadow copy services are also running.

  Connect to the computer as an administrator and follow these steps.
  1. start Windows Backup and Volume Shadow Copy services.
  a. Click Start, type services.msc and press to enter.
  b. search for Windows Backup and Volume Shadow Copy services and start them.
  2 start the computer in safe mode and open the system restore and check the result.
  Safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Installation / product - key error 25004 (this product key can be applied to the computer, due to previous entries of product key) and 1073422306 system error.

  Installation / product - key error 25004 (this product key can be applied to the computer, due to previous entries of product key) and 1073422306 system error.

  You try to install Office or Windows product? Most of the time, this error 1073422306 is during the installation of Office.

  Please look at the following thread to see if it helps.
  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_install/Office-2007-installation-gives-error-25004/6751fcef-F955-4a69-a8af-21444b6f5aa2

  http://social.technet.Microsoft.com/forums/en-us/officevolact/thread/a7d9aad0-A107-4ac6-ac6d-ab7dfeb4fbd3

  Please reply back and let us know if this can help.

  Thank you

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.