Migration of the AD servers

Similar Questions

• Want to migrate the database (4node RAC) size of 4 TB of 10.2.0.5 at 11.2.0.4 on the new servers where the new type servers Primary (4 nodes) and Eve (4 nodes).

  Want to migrate the database (4node RAC) 4 TB size of 10.2.0.5(8 rompt = 4 prim/4 veille) to 11.2.0.4 on the new servers where the new type servers Primary (4 nodes) and Eve (4 nodes).  So with minimum downtime I have restore and recover again on 11.2.0.4 server must then clone that to create the day before.   Here, my question is can I take 0 backupp level before hand and restore on target (new) then primary at the time to leave the downtime take backup of level 1 of 10g and then retrieve it on 11g (new server) after successful recovery I'll perform clone to form eve of database on the new server. does this strategy work? If it works, can someone suggest me steps how can I need recover with backup after restoring the backup of level 0 on 11g. Like should I upgrade before you retrieve it with level 1 backup or I can update and then recover with the level 1 backup from the old server to the new server.

  Here is former servers of RHEL 5 version and new servers are RHEL 6 release.

  Post edited by: Umair_ali

  1 backup L0

  2 restore L0

  3. L1 and ArchiveLogs database backup

  4. copy BackupPieces L1 and ArchiveLog BackupPieces on new server

  5 CATALOGUE START WITH... to catalog the BackupPieces

  6. TOGETHER until lastavailable SNA / Archivelog + 1

  7 RECOVER DATABASE (should automatically identify the L1s and to apply ArchiveLogs)

  8 STOP

  9 START UPGRADE

  10. run catupgrd.sql

  You should also take care on the locations of the data file, dump, instance settings destinations, all link database from the database, connectivity application etc.

  Hemant K Collette

• Need help with the migration of VSwitches Standard servers to vDS

  I have a two hosts VSphere environment. Each physical host has two NIC currently, I have a host in a subnet and a host on a different subnet. Each host has it's own standard VSwitch. I can ping and route between subnets but the DNS servers are completely separated at the moment. I would like to create a vDS that spans two hosts without losing network connectivity. Is this possible? It would simply create two ports with properly configured uplinks?

  How you have configured "Teaming and Failover" in the settings of the distributed port group? Can you confirm that only appropriate uplink groups are active and the uplink for the other subnet group is moved down to the unused uplinks.

  André

• Performing the migration of the first deployment of Collaboration CUCM and IM + P again

  Hello

  We used the server first deployment of Collaboration to create virtual machines, run the upgrades and migration of 9,02 10.5 CM and IM + P.

  The migration was properly executed and CM and IM + P came as a cluster.  We could save phones and test.

  These servers are not in production.

  Can run us the migration task to these servers to update their information?

  No, you will need to remove these servers and run the migration all again.

• Migration from the old to the new storage box

  O/s - AIX
  Present Storage - storage IBM XIV
  New storage - HP EVA 8400
  
  We intend to migrate from old storage to the new storage box. Here's the oracle servers.
  storage team and AIX o/s teams will migrate data from the old to the new storage box storage box. (step of migration include - backup of volumes of the o/s and even restore in new storage box).
  
  WHAT SHOULD DO ORACLE DBA, RECOMMEND SO THAT OUR ORACLE DATABASE SHOULD WORK JUST FINE ON THE NEW STORAGE SYSTEM? Please share your entries?
  
  My hypothesis: The o/s team as AIX will be due work migration preferred to be a s/n, we need not do binary oracle / oracle data files will be the same migrate to new storage box as it is. We being ORACLE DBA should simply ensure that we should have our oracle databases registered with us architecture.
  
  All Suggestions, questions are welcome, thank you friends.

  Yet once if administrators can make the local hard drive appear identical to the operating system when the contents of the disc is moved to the new storage unit you should not have to do anything. If the local drive cannot make it appear exactly the same that I would probably want to re - install Oracle and patch then just start my database to the newly built House. The note of Oracle on cloning Oracle Home can present a different option.

  It would be nice if this process has been run on a test server before production, because according to your window, you don't want to build a new House of Oracle after the migration to disk. I would like the House to be brought as part of the file movement or I would create before it is tested and ready.

  HTH - Mark D Powell.

• Physically move the ESX servers

  Hello world

  This is a really stupid question, but I hope someone can give me the answer. We have 3 x ESX 3.5 servers and a center of physical vitual server I want to move from one data center to another. We HA activated, and when I put one of the servers into Maintenance mode the virtual machines automatically migrate to the other boxes which is fine. I guess if I stop all VMs, ESX servers can be entered in maintenance mode and the engine off the virtual computer will remain on the server.

  If I stop all servers and the virtual Center Server and then turn off the SAN, also are the files of the virtual machine etc. safe on the SAN. My worst fears would be to power everything up and find that I've lost the virtual machine. ;-(

  Thank you

  The reason your virtual machines to migrate to other ESX hosts in the cluster when you enter the Maintenance Mode is actually not HA and DRS.  If you configure the DRS in manual mode or disable it just completely you should see is no longer this behavior.

  You should just turn off all your virtual machines manually (or using a tool to help automate as PowerCLI) and then go into Maintenance Mode on each of your guests.  Then, you will be able to stop with all the virtual machines that are currently assigned to them, if that is your goal.  From there as much as you ship your SAN and servers correctly it shouldn't be a problem power everything backup.  This assumes that the network portion of the House is in order and that you do not need re - IP all your ESX/VMs hosts once they are placed in the new data center.  If yes then obviously it is going to be a little more complicated.

  There are always risks when you physically move servers and the San from one place to the other.  It goes without saying, but try to make sure that you have some kind of environmental protection should there be a major problem.  Things like getting into a car accident or dropping the SAN on ground down as the stairs actually occur then you should try to get a full backup to protect yourself if possible.

• DRS and live Migration with the guest operating system issues

  Hello

  Someone at - he never encountered problems with the DRS or dynamic migration where the OS in question invited crashes under the peaks of the processor. This seems to be with servers but not specific to 64-bit or 32-bit servers it sure substance of concern with machinery that uses a lot of CPU or memory crash when migrating on the fly. We have 7 of Quad-Core AMD BL465 with esx3.5 update1 DRS and HA active and animators have many resources to offer.

  Thank you very much

  Rich

  You experience the problem that is described in this KB?

  http://KB.VMware.com/kb/1003638

  If you believe this or any other answer was helpful please consider marking as 'correct' or 'useful '.

• Migration of the ALUI Instance

  Hello
  
  I need information for a migration of ALUI production instance from a server to another server on the windows platform. The DB and the application server that both are in a single host.
  
  b what are the steps to migrate a production instance of an existing to a new server server? IP and host name will be different for the target instance. (b) can use us the database and collection of research backup / restore to get things? What are the steps to follow after the installation of ALUI in the application in this case server?
  
  All information on the approach / best practices because it is very much appreciated.
  
  Thank you and best regards,
  Claudine

  Hello, Claudine...

  I just finished this procedure recently to create an environment QA... we had previously only DEV and PROD in our chimney. Here is a high level overview of the procedure:

  * Update at 08:52. Memory wrote. Reviewed the documentation and I noticed I missed some steps. **

  1. install all products in the new environment on your new hardware as a clean install.
  2. run the checklist after installation to ensure that all components are online and functioning as expected.
  3. after validation of your own environment, stop all services portal and restore your databases environment target on the new environment databases.
  4 copy the folder "documents" of the environment of the source document repository in the target environment
  4. run the version target of the postinst.sql on the target portal database
  5. start only the portal and imageserver
  6. remove the system of automation of the source servers. Use of truncate and audit database history tables.
  7 reimport packages of migration for all products after the restoration of data to remote servers point to the suitable locations for the new environment. Validate all remote server URL... some will have to be changed manuallly.
  8. purge the search index to remove the test data, then plan a looking for a date and previous time repair to make it work in repair to the automation server startup mode.
  9. ensure that intrinsic Ops file has been registered in the new environment Automation server.
  10 start all remaining services.
  11. to update and test publisher Publish and preview target then click Explorer of Publisher and publish all of the tree.
  12. after installation run checks again to validate.

  Hope that helps...

  Danya

  Published by: Danya D. Smith on April 17, 2009 08:52

  Published by: Danya D. Smith on April 17, 2009 09:12 - corrected a few typos... I guess that my fingers aren't awake yet. Reaching for the coffee.

• all my icons that were normally at the bottom of the screen have migrated to the right side and are all bundled together how to place their return to the bott

  I recently bought a HP 15 laptop with 8.1. I use mainly desktop with latest Mozilla. All my icons that is usually found at the bottom of the screen have migrated to the right side of the screen and boots, to the top, I can't do your choice. I tried to customize without result. I am 75 but strive to keep abreast, but it baffled me.

  Sorry, it's a question of support of Windows, the Windows taskbar does not part of Firefox. I do not use Windows 8.1 myself, and I don't know if the process is the same as on my Windows XP - but maybe click and hold and drag this bar down might work like on Windows XP.

  If you do not understand what I said, or it does not work, here is a popular Windows 8 support forum that should be able to help you.
  http://www.eightforums.com/

• Migration via the time machine (old imac) to new imac done numbers keynote pages and other programms disappear

  Migration via the time machine (old imac) new done imac numbers keynote pages and other programms disappear - what is my mistake?

  You should be able to re-download your apps purchased on the Mac App Store.

• After the installation of 12.0, I get popups and migration from the lower left of my screen that will heal all the ads block settings.

  Whenever I visit a new Web site I can wait for one of my first 'clicks' to open a new window with something like a Quibids announcement or a site with audio asking me to take a survey vaguely regarding the site I'm. There is also an ad in the migration of the lower-left corner of my screen that no amount of effort will get rid of. It didn't happen until last week when I downloaded the latest version of Firefox. My OS is Windows 7 on a Toshiba laptop. I connect with a hotspot from Verizon at home only. I scan all emails before downloading from the server PC of the population. I ran most of Windows and a couple of free virus programs did a full scan nothing helps. This problem does not exist when I navigate with Windows Explorer.

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• How do upgrade the Firware servers in Windows Cluter environment

  Hello

  Can someone help me to make the "framework for Action" to upgrade the Firmware servers in Windows cluster environment that works 2K 3 OS and SQl 2005 Enterprise Edition.

  Environmental Org has two nodes running for clustering of their request, and I knew not active & passive fundamental.

  Waiting for your valuable response...

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Updates to Windows on the Production servers

  We have a requirement that RnD machines should not receive the patches once a user is working on it. The only option is to patch the data servers once the user connects or disconnects. The user must also permit/deny the installation of patches.

  I would like to know if we can include a script to perform this kind of correction.

  Try to repost your question in this discussion:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.Server.Security

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• look up NS - what are the domain servers?

  What are the domain servers, host? What does 'mark' when I try to copy and paste? and finally that authority no answer means in the ns-look-up?  Do two addresses expected to match then presented the homepage and answer non, what does everything mean? David StClair

  Hello
  A Windows Server domain is a logical group of computers running versions of Microsoft Windows operating system that share a central directory database. This central database (called Active Directory from Windows 2000 [1], Domain Services Active Directory in Windows Server 2008 and Server 2008 R2, also referred to as NT Directory Services on operating systems Windows NT, or NTDS) contains the user accounts and the security information for resources in this area. Each person who uses computers in a domain receives its own unique account or user name. This account can then be assigned access to resources within the domain.

  In a domain, the directory resides on computers that are configured as "domain controllers." A domain controller is a server that manages all aspects related to security between the user and domain interactions, centralizing administration and security. A Windows Server domain is usually adapted to the companies and/or organizations when more than 10 PCs are in use.

  Working groups Windows, on the other hand, is the other model to group windows computers in a network environment that comes with Windows. Workgroup computers are considered to be 'standalone' - i.e. There is no formal affiliation or the authentication process formed by the working group. A working group has no servers and clients, and as such, it represents the paradigm of Peer-to-Peer network (or from Client to Client), rather than to centralised architecture constituted by Client-Server. Working groups are considered difficult to manage beyond a dozen clients and lack of unique signature, scalability, resilience disaster recovery and many features of security functionality. Working groups of Windows are more suitable for small or office networks home.

  A domain does not refer to a single location or a specific type of network configuration. Computers in a domain can share a physical proximity on a small LAN, or they may be located in different parts of the world. As long as they can communicate, their physical position is irrelevant.

  Active Directory computers within a domain can be assigned in OUs based on location, organizational structure, or other factors. In the area of the original Windows Server machines system (shipped with Windows NT 3.x/4) could only be seen in two States of administrative tools, 1) computers detected (on the network) and 2) computers which were actually in the domain. Active Directory makes it easier for administrators to manage and deploy changes to the network and political (see Group Policy) to all connected machines to the domain.

  Computers can connect to a domain easily via LAN or WAN using a VPN connection. The users in a domain are able to use enhanced security for the VPN connection with the support of a certification authority that is granted when a field is added to a network, and thus the smart cards and digital certificates can be used to confirm the identities and protect the stored information.

• How to validate Windows 7 after the migration of the HDD to the SSD on a laptop?

  I upgraded my laptop with a Windows 7 OEM and windows has migrated to the new SSD.

  Now he tells me that my Windows is not genuine, even after that I tried to activate my windows again.

  It's the same machine and the same product key, just a different SSD.

  What should I do?

  Edit:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-*-*-*-PVDR2
  Windows product key hash: U3gFvytkRKyyDaU2zHOKAPpt02w =
  Windows product ID: 55041-011-2754703-86388
  Windows product ID type: 6
  Windows license type: Volume MAK
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {D17ADED6-DDC8-40A5-8614-BD86AB6E2A88} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\en-US\sppc.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\sppcext.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\slc.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\slcext.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\sppuinotify.dll.mui[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\en-US\slui.exe.mui[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\en-US\sppcomapi.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\sppcommdlg.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\sppsvc.exe.mui[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\en-US\user32.dll.mui[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {D17ADED6-DDC8-40A5-8614-BD86AB6E2A88}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-BATH55041-011-2754703-863886S-1-5-21-2632269440-3034877388-763067593LENOVOLenovo IdeaPad Y580LENOVO5DCN36WW (V2.03)20120503000000.000000 + 0001 090409South Africa Standard Time(GMT+02:00)1AE4D3307018400FE3LENOVOOC-01 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
  Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 55041-00172-011-275470-03-7177-7601.0000-2582012
  Installation ID: 000401724701945290880302308912032665376104509226579985
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: PVDR2
  License status: licensed
  Remaining Windows rearm count: 3
  Time to trust: 2015/12/17 16:04:12

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000000EF60
  Event timestamp: 12:17:2015 15:26
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui

  --> HWID data
  Current HWID of Hash: MgAAAAIAAQABAAIAAAABAAAAAwABAAEAln18JLIDdxYu8ky89I1Eo9DWVvus90a5lmM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO OC-01
  FACP LENOVO OC-01
  HPET LENOVO OC-01
  BOOT LENOVO OC-01
  MCFG LENOVO OC-01
  UEFI LENOVO OC-01
  ASF! LENOVO-CB-01
  SLIC LENOVO OC-01
  SSDT LENOVO OC-01
  ASPT LENOVO OC-01
  FPDT LENOVO OC-01
  SSDT LENOVO OC-01
  SSDT LENOVO OC-01
  SSDT LENOVO OC-01

  According to your report, you use a Volume License customer who is only available for Volume License customers who deploy Windows 7 in bulk. Where did you got this license?

  If you got through the employer, try to contact the volume license activation center to reactivate:

  Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx