Mike
several times my pc tried to install an update '800b0100' but has always failed, this is a significant update, what can I do?
You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
I suggest before you stop and install the updates, disconnect from the Internet, first.
Tags: Windows
Similar Questions
-
I reinstalled xp on dell inspiron 1100, could not get to connect wireless or ethernet. It said no modem error #62 and 63 error no modem not found, I had xp pro edition before but now have xp base, you can help me find the modem can also get DVDs to play, without a decoder. Thank you, mike
Hello
Follow these steps and check if the problem persists.
I suggest you to reinstall modem drivers:
(a) go to the manufacturer website and download the drivers. This will
usually come as a zip file or installation program.(b) if its an installation program, run it. No need to go further.
(c) if it is a zip file, unzip all the files in a temporary directory.
(d) right click on my computer, then select Properties > | material | > Device of
Manager.(e) to locate the modem on your equipment list. It could be among the "pci
device communication "or similar.(f) right click the icon and select get updated driver.
(g) install from a specific location and follow the instructions of the wizard through. Specify
where you unzipped the files. Some create additional records
decompression so you will look for an INF.(h) proceed to configure the modem in the properties applet, phone and modem in the
Control Panel and verify that your settings are correct.See also:
-
I go to the Panel as it says and click speech, then it says to click on the audio input but it isn't here! There is only one audio output. I want to test my mike because he has not worked for me and I've never had a problem with it before. But I can't test it because there is no audio input to check with.
Hi SonnyFields
I suggest refer you to the links below and check if that helps you set and configure the microphone on the computer.I hope this helps.
-
At startup I get the following error message: "cannot load or launch C:Users\Mike\AppData\Local\Temp\msuospuwo.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry. I tried to run my antivirus program, CCleaner and system fFle Checker, but the problem persists. How can I fix it?
Original title: persistent registry at startup error message.
Hi Mike,.
Thanks for keeping us posted and share this information with us.
I would like to run you a SFC scan.
See the article-
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Do get back to us and let us know the status. We will be happy to help you.
Thank you.
-
I am running windows vista Home premium. When my screen, I get an error loading c:\Users[user-name]\Music\iTunes\iTunes/mike/AppData/Local/uwamocin.dll module could not be found. My internet explore continues to mess up and running slow, I had other problems too, I think it's related. Is there a way to obtain another dll to replace this lack?
Hello
A Google search has nothing on "uwamocin.dll", which suggests that it is associated with Malware.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If the problem persists after scanning, take these startup entries:
"How to use MSCONFIG in Windows Vista"
http://www.netsquirrel.com/Msconfig/msconfig_vista.html
You can also use this free program to do, too:
"Autoruns for Windows V11.32"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
See you soon.
-
I want to use only the external mike and headphones
However, somehow the microphone for the internal webcam or Skype or else suddenly transformed, so now I have two of them. The internal MIC is echoing to the sounds of television, me and interferes with my external mike recording.
I cut it by adjusting the levels, but I want that he TAKES... OFF! When I go into properties, it shows just an icon for the external mike and headphones, it does not seem to suggest that there is another work of mike. It's windows 7, 7 year old computer.
Any ideas?
Hi Mollie,
We had a recent discussion on the same issue. Please visit this link and follow the instructions in James.Orr.
Let us know if you need more information.
Kind regards
-
How can I get ahold of a LIVE person? I need HELP with my email account (* address email is removed from the privacy *) you can contact me to the * address email is removed from the privacy * or * remove * please someone HELP! Mike Golab
E-mail address is removed from the privacy *.
No, and that has nothing to do with this old thread. This is a scam that last for years. Microsoft never does unsolicited phone calls.Is calling, Microsoft, a scam?
http://answers.Microsoft.com/en-us/protect/wiki/protect_other-protect_scanning/is-that-call-from-Microsoft-a-scam/6718e389-8a00-4E4B-ACA1-d07298ea4c19
Scams by e-mail or web: how to protect yourself
http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx
It's a real call from Microsoft?
http://www.ComputerActive.co.UK/CA/PC-help/2134917/genuine-Microsoft
Avoid scams to phone for tech support
http://www.Microsoft.com/en-GB/security/online-privacy/avoid-phone-scams.aspx
Do not fall for phony phone technical support
http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx
Aggressive, persistent Windows tech support fraudsters continue to track consumers
http://www.Computerworld.com/s/article/9248122/Aggressive_persistent_Windows_tech_support_scammers_continue_to_stalk_consumers
What is a certified Microsoft [or] partner?
http://securitygarden.blogspot.com/2011/09/Microsoft-removes-Gold-Certified.html -
using mike internet Skype does not work
using computer the hp mini laptop, windows 7 basic
How can I activate internet mike?
Thank you
using computer the hp mini laptop, windows 7 basic
How can I activate internet mike?
There is no specific microphone for 'use of the internet. " You should check your audio devices / controls to make sure that your microphone is not muted. Test it with something simple (like the 'tape recorder' app.) built into Windows
This might be useful:
https://support.Skype.com/en-us/FAQ/FA10330/how-do-i-adjust-the-sound-settings-on-my-computer-and-in-Skype-for-Windows-7https://support.Skype.com/en-us/FAQ/FA10745/how-do-i-use-a-headset-microphone-or-speakers-with-Skype
-
Original title:
There are three computers in my office. Both run Windows 7 Edition Home Premium and the third is running Windows 7 Professional.
I am trying to allow access to files on the computers of Home Premium. I go to 'Network' and open the other computer, but he said "You are not allowed access. \\Mike-PC\c contact your network administrator to request access." I went to Mike-PC computer to 'Share' this folder then joined the homegroup even / working group and everything in 'Advanced sharing' in the 'network and sharing Center', but it does still not activated.The Professional Windows 7 computer successfully ' "shared folders and the other two computers can read / write files, but not the other way around.
Any help would be greatly appreciated.
Hello
1 are these computers using a homegroup or working group?
2. were you able to share files earlier?
3 have had it all changes to computers, before the show?
Method 1:
Refer to the suggestion provided by Jack MVP on January 25, 2011, in the following link.
Method 2:
Disable the firewall and security software and check.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.
-
Built-in Mike does not not on Spype after updating system 8
When I use Skype echo test I don't hear my voice message. When I make a Skype call, I can hear the other party, but they can't hear me. I checked the settings of mike and used also check online mike, which indicate that the microphone is working. Any suggestions?
[Moved from the community centre of Participation]
Hello
Skype is not supported in the Microsoft Community.
Help Skype https://support.skype.com/en/
Https://support.skype.com/en/category/CONNECTION_ISSUES/ connection problems
His problems https://support.skype.com/en/category/CALL_QUALITY/
Micro convenience store https://support.skype.com/en/faq/FA897/microphone-troubleshooter
Skype Community https://support.skype.com/en/faq/FA897/microphone-troubleshooter
Don
-
Picked up a photoshop cs3 to a person who has died. I typed the serial number in and says its already registered.can that I use this program.what do, I have to do.thanks, mike
You may need to transfer the license, transfer an Adobe product license
[moved from Creative cloud download & install download, installation, commissioning]
-
Set the amplitude of mike when recording directly in hearing CC?
I can't figure out how to set the amplitude of mike when recording directly in hearing CC.
When I load hearing I have click on the waveform and create a file.
I can then click on the Red record button and start recording, but the amplitude is very small.
I know I can fix it in post editing but how to adjust the amplitude record raw?
Well, I looked at the manual. If I try to use a microphone with this mobo, I'd be very inclined to mount the system audio front panel, as it seems to have an understanding of slightly different mic that work peut better (although I think that you must run the configuration utility to configure). The details of this are on page 30 of the manual. For starters, it seems that he might in fact be two mic channels, which probably means that they took little seriously, a little more than usual.
I still think that the preamp is better, but I won't get it a chance to consider the issue until tomorrow.
-
Mike's Smith sent me what?
I have 3 posters of "Mike Smith" for flex 2 and 1 for flash
where can I send a thank you card?
talk to yourself.
-
Hello!
Anyone using the script coach Mike on Photoshop CS5? It worked perfectly on my two PCs, until I uninstalled CS4...
Any ideas?
Found this for you amer.html http://www.texasphotoforum.com/forum/post-processing-central/123566-photoshop-cs5-mikes-fr
-
Move to Oracle Database 11g Release 2 with Mike Dietrich
Hi friend;
Yesterday, I was in an Oracle in Istanbul.
In the seminar; Author Mike Dietrich, who works in Germany-Oracle show us how to do the step of database Oracle 11 g Release 2. His presentation available on my blog.
I highly suggest to check this pdf. It already has cover:
-Support of politicians, patches, Documentation, upgrade paths
-Database upgrade (DBUA, command line, after the upgrade, alternatives, Clusterware and ASM upgrade)
-Diagnosis and Tuning
-Performance evaluation
You can find many useful tips, path of evolution, related notes metalink etc etc... in the pdf file.
http://heliosguneserol.WordPress.com/2010/06/17/move-to-Oracle-database-11g-release-2-with-Mike-Dietrich/
Respect of
HELIOSHelios,
Interesting paper! Thanks for sharing with us.
Thank you
Hussein -
I am running Vista 32 bit. I can't stop Firefox to create a second (unwanted) instance of the folder new downloads. I tried a new profile and reset etc... no joy
It's maybe just a little problem on the folder field.
If downloads store in the first folder new downloads of root, but reports of Firefox in the two files settings dialog box, it is just a glitch on FF. Perhaps an incorrect escape / special caracter makes this bug. Try just in the case of completely uninstall Firefox and remove your profile (you can save your bookmarks), then try again.
Maybe you are looking for
-
Why the address bar is not displayed marked bookmark first when entering?
I have all the tag bookmarks. When I type the given tag name (exact) in the address bar it shows mixed history results ignoring added fresh bookmarks. I have to manually go through the Bookmarks Manager and select them by label. How to solve this pro
-
Want to VGA drivers for Satellite A100-033 under Vista Edition basic family
I have a Satellite A100-033 which runs Windows Vista Home Basic. The main video driver is an Intel 945 chipset. However, I would like to install a regular VGA driver. It's because I have a software which requires mode full-screen. The Intel chipset w
-
: HP Photosmart 7510 does not print port cn25u3501f05px
Printer does not print. Failed to remove 'which is printing' point-tried cancel, delete, interrupt and restart, turn off printer, even the fact of unplugging the printer and repluging it. The port is cn25u3501f05px, but I don't know if that means any
-
Lumenera Infinity 2 camera Communication issues
Hello National Community Instruments, I am trying to get a 2 Lumenera Infinity camera to work with LabVIEW.I downloaded the http://www.lumenera.com/support/downloads/microscopy-downloads.php sheet I also downloaded NI Vision with its pilots IMAQdx an
-
How to install win 7 on new labtop
Hello I bought the new notebook the operating system is FreeDos and I insert win 7 dvd in DVD - ROM and in the bios menu, I set first boot on dvd rom and after that nothing happens just go on Free back and no longer display the configuration of insta