Milanese and buckle brown leather + race
Hello
I have a question for users of AW with Milanese or buckle brown leather. It is convenient to run with these two bands? You see signs of wear, especially in the loop (reaction to sweat) leather?
Let me put it this way: agree the Milanese loop and buckle brown leather for the race?
Thank you.
Owner of Milanese loop here. No signs of wear of the band apart from a few scratches outside of the loop. It breathes well, much better than the tapes sport, although whether a little heavier. I have a Apple Watch Sport (aluminium rather than stainless steel), so it's light enough to not feel uncomfortable on my wrist during exercise.
Tags: Apple Watch
Similar Questions
-
How to increase SGA_MAX_SIZE and PGA_AGGREGATE_TARGET in 10g RAC
All,
We built the new RAC environment with the following configurations.
Linux - RHEL5
Oracle - 10.2.0.4.0
2 node RAC environment.
The database is now live.
1. now, I need to increase the SGA_MAX_SIZE and PGA_AGGREGATE_TARGET in this RAC environment.
Can anyone tell me the steps. Do I need to stop the database?
Note: Always OEM is not setup for this one.
2 performance testers are complaining about "high response time. No indication on this one?1. now, I need to increase the SGA_MAX_SIZE and PGA_AGGREGATE_TARGET in this RAC environment.
Can anyone tell me the steps. Do I need to stop the database?You have to stop database... When you change the sga_max_size initialization parameter.
But you need to check on kernel.shmmax (all nodes) before
# sysctl - a | grep shmmax
kernel.shmmax = xxxxxIf you need more... and you have a lot of physical memory ;)
You can modify /etc/sysctl.conf and then "sysctl Pei" kernel.shmmax as you said Mufalani.SQL > alter system set sga_max_size = new_size sid ='* ' scope = spfile;
or
SQL > alter system set sga_max_size = new_size sid = "DB1" scope = spfile;http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/initparams192.htm#REFRN10198
Furthermore, if you need new dimensions on LMS, you must change the parameter initialized so SGA_TARGET.
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/initparams193.htm#REFRN10256You cannot change... no stop on PGA_AGGREGATE_TARGET,
SQL > alter system set PGA_AGGREGATE_TARGET = new_size sid ='* ';
or
SQL > alter system set PGA_AGGREGATE_TARGET = new_size sid = "DB1".
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/initparams157.htm#REFRN10165When you replace "sga_max_size"... spfile, you need to stop/start database, I think
You should stop/start a front knot (don't make sure no error)... and stop/start another node on the other.Example: 2 nodes (racdb1, racdb2)
Check shmmax 2 nodes
# sysctl - a | grep shmmax
kernel.shmmax = 8GSQL > create pfile = ' / tmp/pfile-backup ' of spfile;
SQL > alter system set sga_max_size = 8 G sid ='* ' scope = spfile;$ srvctl stop d racdb-i o racdb1 immediate instance
$ srvctl start instance racdb d-i racdb1If error... Check the log of alerts on racdb1 and solve (remember to also change "SGA_TARGET"), if no error stop/start on racdb2
$ srvctl stop d racdb-i o racdb2 immediate instance
$ srvctl start instance racdb d-i racdb2Date of arrival:
Select * from v$ sgainfo;
Select * from v$ sga;PGA_AGGREGATE_TARGET you can... (no power DB)
SQL > alter system set PGA_AGGREGATE_TARGET = 2 G sid ='* ';2 performance testers are complaining about "high response time. No indication on this one?
Use ADDM + AWR or Statspack...
make the snapshot on each node of the CWA and reporting during the test.Also "High response times" are based on
-Index
-partition tables
-High interconnect (NIC)
-Disk RAID...
-Variable SQL (if using the same on OLTP sql statement)
and...Good luck
Edited by: Surachart Opun (HunterX) on August 14, 2009 10:57
-
Lenovo S10 and Lenovo S10e leather covers
Howdy
It's completely superficial, but never the less something I hope you know the answer to
The leather for the Lenovo S10 book covers fit the Lenovo S10e
Drag them on the covers are great, but I want a style of easier access and business
So far, I have not found discussions on this topic
Thanks in advance
Kit
Yes, they do.
Same chassis.
-
Line tool misaligned and cannot resolve the race (.dxf exported from sketchup)
I've been using illustrator for this purpose for many years still today when I try to draw lines to complete the .dxf exported from sketchup lines lines and to her are still perhaps 1/8 ". Also, I can't set the race of 1 PT. LMK if someone had this problem and if you do not see the file I'm working on I have the link below.
Thank you
Gro FloorPlanBase 4.28.ai - Google Drive
OK had to use turn off my dark cookie and use google chrome to get your file.
So you can see that some parameters are set to align on the pixel grid, and after the name in your window you have RGB.
- Click on the dashboard to align to grid of stack and change the empty box
- File > Documents color Mode > CMYK
- Transform flyout, unchecked align new elements to the network stack
This can happen when you make a new document and web document profiles has been used, or some gave you the file in this way. In the screenshot below you want to watch for change RGB to CMYK and snap to grid of uncontrolled battery
-
difference between SWEEPING earpiece and VIP at the RAC
Hello
The SCAN and VIP are used to balance the load only as I know.
Is that there is no difference between these two?887400 wrote:
Hi Billy and all,I answer too late. Sorry for that. I'm still not clear picture on VP geeing
YOU SAID
"A virtual address is just that--virtual." There also exist on another node of the cluster, as his 'owner' node is not currently running. "So this node services this virtual IP address, until the owner can"reclaim"this virtual IP address.
2 node RAC 10 g R2 (so no SCAN)
Let's host 1: abc.lmn.com;
1 host ip: I say 129.1.2.3; and vip 1 as abc.lmn - vip.com-> 129.1.2.4
2 the host: efg:xyz.com
with the IP 129.1.2.5 and vip 2 as efg.xyz - vip.com-> 129.1.2.6;
The ip address and the VIp as just example only.i did not follow the standard conventions.
Scenario: the client tried to connect to the instance and lets assume host 1 is out of service so host 1 (abc.lmn.com) cannot be used at the request of the customer.
If the connection should switch to host 2. And host 1 cannot switch as its already down.
VIP 1 is the address assigned to the physical host 1.
MY Question is: as the physical host 1 itself is down how the 1 VIP which is attributed to host 1 helps the failover.
I hope that your next reply will clarify my doubts.
Thank you
Just to give you clear answers:
When host 1 goes down, his VIP are toggled on node 2. And when the client tries to connect to the VIP of node 1, it will immediately get the error message (it doen't wait on TCP/IP timeout) and then the client will connect to node 2 VIP.The reason why client does not connect to the VIP of node 1, however its PLACE on node 2, is because when VIP has switched to node 2, his questions, the new MAC addressed to customers. Client both get immediate notifications as error and the client, and then connect to node 2' VIP that runs on 2.
Hope this helps
-
I am a beginner. I'm trying to create a simple VI only switches beetween two types of signals like sine and triangle when someone press on the push button and at the same time, save the data in the file to my desktop. I also have a stop button which no longer record data. Here are my questions and dproblems:
1. when I press the button, it does not the true and false in the structure of the case so that I can see the triangle wave stops and begins the sine waveform table.
2 when I press the stop button, I want the program still running, but the process of writing data in time the loop stops. I don't mind if the graph of the wave stops too but it would be better for the user to see the wave form is running, but the data will stop recording.
3. Although the condition of the loop did not accept the local variable for the stop button inside the loop or within the structure of the case, so I put the button outside all the loops and the structure. (I know that this is a problem, I do not know how to use a single button several times in a single code. The local variable did not work the world premiere? I have to?)
4. the data file it creates hase a lot of lines and columns. I expect a time column and a column of mixed signals based on the push button amplititude this user press every time. I did that with the acquisition of data and a sensor, it automatically gives me the voltage and time in a column. I tried 2D and 1 d and it has not changed anything.
Thank you for your help
Like you said, you read only your entries at the beginning, then whatever value they had before you hit run is worth to be seen by the rest of the code. Programming LabVIEW is based entirely on the data flow and parallelism. It is incredibly powerful and has led to its success over the years (coupled with graphical programming), but is usually one of the first things the new developers stumble on. This is a simple resource to familiarize themselves with its functioning. The function to highlight execution is a great way to watch how your application uses data streams.
Simple code goes like this:
- Containing the main code of while loop
- Inside of the whole loop is all user interaction code or modify the code entry
- Stop the terminal loop is attached to stop certain criteria or user selection of a stop button
- Loop initialization above all if necessary
- Closing referrals and communications, etc after all loop
It's very simple code. If you want to watch in more advanced architectures that are scalable, Google "LabVIEW State Machine" or "LabVIEW producer consumer."
If you are just starting, you should do a free training have the capabilities of LabVIEW.
"Give me six hours to chop down a tree and I will spend the first four sharpening the axe. -Abraham Lincoln
Here are some free training focused mainly on LabVIEW and hardware tools to help get started.
-Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)
Learning OR training videos resources
Introduction to LabVIEW for 3 hours
Introduction to LabVIEW for 6 hours
Paced self-study for students
Self Paced Training beginner to advanced, required SSP
LabVIEW training Wiki - Containing the main code of while loop
-
Find files and etc after a race a full system restore.
I had problems with my computer and I ran the "full system restore" (with backup). How to make the backup of files, etc. back to where they were? When I go to search and type something in this use to be on my computer, I see a file or several files that say MyBack and the file I'm looking for, but I do not know how to restore it back to where it originally was.
hamntre,
Thanks for posting. It sounds like you have used the restore\backup OEM utility to restore the system. If that is correct, then you will need to check with the manufacturer to learn how to restore your files from your PC. If you used the backup utility built into XP you just run it again and follow the steps to restore your files. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
BB10 and Playbook Air SDK race side by side?
Hey guys,.
Is it possible to have both installed configurations at the same time for flash builder? Run the BB10 and the Playbook SDK as distinct configurations? Cause now I have to install one or the other, and when I install one, the other is just lost.
For example, I want to bring my playbook to BB10 application. So, naturally, I have had online, download Air BB10 sdk beta 2, install it. When I open the flash builder, I start getting errors in my code because im trying to access the classes that were at some point in time very available in the tablet sdk, but it seems that he has been replaced by the bb10 sdk.
I see no setting anywhere to "switch" between the two configurations of configuration. From my understanding, if you want to build an application BB10, u I use the sdk BB10 and with the playbook vice versa. You are unfortunately unable to use 1 sdk and develop at the same time.
Am I right my assumptions? And could tell me is it someone please in the right direction on how to manage both facilities?
Thank you
Theodore M
In Flash Builder preferences, under Flash Builder / target platforms / BlackBerr Tablet OS, disable the option "Use last installed SDK" and for the development of the Tablet, I have:
C:\Program Motion\blackberry-tablet-sdk-2.0.0 search
BB10 development (in your other workspace), it should be:
C:\Program Motion\blackberry-tablet-sdk-3.0.0 search
Flex 4.6 must be intact.
-
Adjust dashes and spacing in the race
Hello
In InDesign, there is a feature for traits called corners which can slightly adjust indents and spaces so that, for example, in a line right, a dash begins and ends at the line, while in reality, if the dash and the gap were strictly applied, the line starts with a hyphen, but end up in a ditch. A similar feature is available in Illustrator?
This is for CS4. Thank you.
This was introduced in Illustrator CS5.
You could try a script by Hiroyuki Sato, who could do this:
-
Installation of versions of two DB (10g and 11g) on a RAC
Hello
I need your help, please.
Can I install versions two DB - 10 G and 11 g - on a CAR?
Thanks in advance.
Best regards. CristinaThank you for your comments. Glad to know it helped.
Please close the message if you feel that you have the answer and to clean the Oracle forum.
https://forums.Oracle.com/forums/Ann.jspa?annID=885 -
gr 10, 2 and 11 GR 2 RAC installation
According to the pythique site, installation of 11 GR 2 has a 40% less than 10 gr 2. You guys would agree with that?
If you were asked to choose a great improvement in the installation of RAC 11 GR 2 (installation of network infrastructure more CARS Db) makes your life easier, what would you choose?Yes...
AutoCorrect scripts... Automatic configuration of SSH...
Thank you
Anthony -
With EM without installing the grid and WHO 2 node RAC
Is it possible to install and configure 'EM without using Server NETWORK and the WHO.
Kind regards
Yasser.Hello
Emagent, it's that something in relation to the grid control. Grid control, you can manage multiple databases from a single point. But for a single database you don't need grid or emagent. DBCONTROL just enough. What do you see when you run:
#emctl dbconsole status
If dbconsole is stopped, you can start by
#emctl start dbconsole
When you start dbconsole with the above command, you will also see the url for the EM. Dbconsole EM is just a web management interface. You must also have a repository. When you create an oracle repository will create just schemas named 'sysman' and 'general '. It will create the objects (tables, views etc.) under these schemes. Infact the data you see on the EM console is filled with these patterns. That's why you need a repository for the EM work.
I hope this helps.
-
SWR50 SmartWatch 3 &; 3 Wrist Strap SWR510 SmartWatch
Hello
I just bought a SRW50 of 3 Smartwatch (standard black edition: http://www.sonymobile.com/ca-en/products/smartwear/smartwatch-3-swr50/) & I would buy the strap metal and black - brown leather in order to change the style.
http://eShop.sonymobile.com/FR/buy/OK-smartband-wrist-strap-swr510/ (out-of-order now)
All bracelets is compatible with my standard edition SWR50? Sony France say no telephone and, Yes, on facebook, I am a bit lost...
Thanks in advance & best wishes for 2016
Of course, at least they should be.
https://talk.sonymobile.com/T5/SmartWatch-3/strap-SmartWatch3/m-p/970426#M839
-
can change uid and gid of oracle user after installation of 11g rac
can we change after installation of 11g rac oracle uid and gid in 11g RAC. ?
Thank you
BoucettaRead this
It is supported to change Uid/Gid of the owner of the Oracle database software after Installation? [1474891.1 ID]* "It is not supported to change the UID/GID of the owner of the Oracle database software after installing". * "
Please don't forget to close your message, you got your answer :)
-
Unlike public and RAC virtual ip
Hi gurus,
What is the difference between public and virtual ip in rac environment. Why are we using virtual ip instead of the public IP address.
Please let me know.
Thank you very much...863784 wrote:
Hi gurus,What is the difference between public and virtual ip in rac environment. Why are we using virtual ip instead of the public IP address.
Please let me know.
Thank you very much...Hello
Public IP address is attached to the physical NETWORK card so there are prescription to move arround while VIP is virtual, so it can be easily moved to another virtual interface on other nodes. The purpose of having a VIP is client connection can be failovered to the surviving nodes in case of failure
See you soon
Maybe you are looking for
-
Why the latest Firefox won't play YouTube videos
Everything worked fine until the latest version of Firefox, now I can't play YouTube videos. No problem with Chrome or IE. Firefox screwed up something with their latest version. Problem started on 09/03/15.
-
can a 'tab group' (Panorama) be moved to a "new window"?
Looking at my tab groups in the new feature of Panorama of Firefox 4, I was expecting that it would be a gesture of how an entire group to a new window, but could not find a way to do this. Is there a way? Make a right click on the Group tab would be
-
analysis of the chain does not recognize the AM/PM indicator
Hello I'm using Labview 8.6. I want to parse a time string, with an AM/PM indicator on the inside, but the format of time code 'string scan. ' "%
-
Hello! I have on question, how can - I plus some fractions in LabVIEW? Example: (40/100 * s + 1) + (50/200 * s ^ 2 + 102 * s + 1) How can I make this operation in LabVIEW? Thank you!
-
a video card with DDR2 memory will work with a motherboard with memory DDR
What type of video cards will work in a SONY VIAO VGC-RA820G computer series