Mind IE, CPP and SSL problems

Similar Questions

• BlackBerry sudden Z10 and serious problem with Z10 NEED HELP Please

  I have a z10, one of the first who came out in Toronto (if it is one)
  (difference), a few hours ago, I fell into a serious and sudden
  problem.

  I was able to swipe left and right between the pages of apps, even fall down
  Since the Summit, but I cannot open anything, not even not making a call or settings
  Options.

  Any time I try, for a fraction of a second, it looks like its about load
  something then nothing. (image slides to the right quickly and goes back
  each attempt)

  So I first did a reset, same problem, so I did a battery pull (15 minutes) and the problem is.

  I tried via USB to do a backup on blackberry Manager and maybe do a
  Re - install everything, but when I was invited to the password
  my camera on my PC, it told me that it was (I use a wrong password
  This blackberry on my computer 4-7 days a week, twice a day sometimes for an
  year and I have never miss typed my password, nor have I changed it)

  After trying everything to make sure that the first letter was maybe upper/lower
  cases, even my other possible phone password, nothing worked...

  On the 5th unsuccessful attempt my phone prompted me to type "blackberry", which
  I did, then I typed my password on my phone that I type in about 15 times
  one day because I put my phone in a lock in 5 minutes and has always said that he was wrong... I'm no attempt of 9/10 on and lost
  for options.

  Please if anyone can give me any suggestions, or even how do I back up my phone
  and now, or I have a previous backup of whipe form 4 months ago that I
  I wouldn't come back in the worst cases.

  Thanks in advance for your help

  Well... If you are in 9 out of 10 here and you don't mind not to restore your device, then enter the password again once and then the device should enter the device wipe mode. That will reset your device to factory setting and then you can start fresh by reloading your backup made the earlier

• AnyConnect and SSL - VPN without client

  Are there problems in running Cisco AnyConnect and SSL - VPN without client side by side?

  I am currently looking into adding features for an ASA AnyConnect who currently set up to operate without SSL - VPN client. The system without client is not removed. I don't know how to set it up, I wonder if someone has already set up this or if there is no problem with this Setup?

  Hi Daniel

  It's a little complicated if you want a granular authentication and authorization, but it works.

  I'm running an ASA with IPSec, SSL Client and clientless SSL.

  Each of these virtual private networks with user/one-time-password name and certificate based authentic.

  The main challenge is to put in place its own structure of profile cards, connection profiles, group policies and dynamic access policies.

  Feel free to ask questions...

  Stephan

• Windows IPSEC and SSL VPN client on the same machine

  Matches (coexistence) installation of IPSEC and SSL vpn clients that are supported on the same computer, windows (XP and Win7)?

  As mentioned by Patricia and Jennifer (5 stars), you can install two clients on the same machine without any problem.

  The tricky part comes when you are trying to connect two clients at the same time, that's when you may encounter unexpected problems.

  However, if your intention is to install both clients and connect them individually and not at the same time, you'll be fine.

  If you have any other questions, please mark this question as answered and note all messages that you have found useful.

  Thank you.

  Portu.

  Post edited by: Javier Portuguez

• GPS, Wifi and Bluetooth problems

  So I have an iPhone 6 running on IOS 9.3.4 and have had problems with the GPS and the strength of wifi connectivity and bluetooth for a while now.

  First of all, the GPS.  It does not work.  When I run the maps or google maps on my device and the input an address the app can give me a written plan, location, but will not show me on a map.  He'll start road to everywhere where I go and tell me to start position, for example, to the North on the road on that I am, but the arrow does not follow me and tell me when the turn or where I am.  Occasionally, he has a message of guidance down with a spinning wheel and then, after a few seconds, disappears.  I tried to reboot my device several times, I have reset the network setting, I reset all of the settings, I backed up my phone, reset it and recovered save him.  Nothing has worked.  I was at my local verizon store and received a 'new' (its definitely refurbished) phone and the problem persists on the new phone.  I reset the phone to factory setting without content, set up as a new phone and tried the cards again, thinking it might be a problem with the back to the top.  It still does not work.  I'm perplexed right now and do not know what to do/try.

  Second, wifi and bluetooth connectivity is terrible.  I can only receive a wireless signal so that in very close proximity with the router.  I tried to different houses/companies and it is the same question.  However, bluetooth is just as bad.  I use headphones wireless, and go to the gym/go for the route with them.  I used to be able to walk around the gym without my phone and have connected the headphones, but now I can't have my phone 2 feet of the appliance without the music being agitated (bad connection).  I'm really irritated that I cannot understand this point and that he can't seem to find a fixed solution online.

  If you have just updated to iOS 9.3.4, which I didn't even know still shone, so maybe it's a bug that comes with the update. However, your problems seem to follow a trend, you can not far from a source of connection and now a signal. It is perhaps because the necessary components for the Bluetooth, GPS and WiFi signal are damaged or defective. Have you dropped or spilled liquid on your iPhone recently?

• My Firefox exit and gives a "not responding" message once I used Google Mail. I tried to boot into "safe" mode and the problem persists.

  I have a question where Firefox wont ' quit and give a message "not responding" after I've been using Google Mail. It works fine when I'm not using this program. I tried Safe Mode and the problem still happens when I go on Google Mail, so it is not connected with modules, extensions, etc.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome.

  Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome. Specifically, a large part of Tumblr and Facebook menu has been changed in another language (Russian, I think). I tried reinstall Firefox, clear the cache and reset firefox to its default state. None of them helped. Any suggestions on how to fix this?

  Hey again,

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  I hope this helps!

  Curtis

• I bought my iPhone 5 s by T-Mobile and 2 months left to purchase. My phone don't get re will not charge. Support Apple says this isn't the phone and replace the cable. This was done and the problem remains. Anyone who has experience of this pro

  I bought my iPhone 5 s by T-Mobile and have 2 months left on the purchase. My phone no longer accepts a new presentation. Apple support ran a diagnostic and said it isn't the phone and that I should replace the cable. This was done and the problem remains. Everyone has to experience this problem? And, if so, what was the problem?

  He likely is the phone, but you do Apple physically inspect it. Send it or take it to the Genius Bar. You can do one or the other of http://getsupport.apple.com.

• Satellite L650-1EQ - black screen and overheating problems

  Hello

  I have a problem with my laptop Satellite L650-1EQ.
  A few days ago my laptop was overheated quite often.
  I would like to start playing a video game and the computer could actually turn off after 10 minutes of playing it.

  I realized that this was getting serious so I stopped using my computer to play games and I decided that I need to clean it. However, I was looking for online on how to clean up my computer and then my screen turns white!

  I didn't know what happened and was very scared.
  I turned off the computer.

  The next day I turned on the computer to see if it was good, and the screen was black however the laptop power light comes on and I hear the vents work.

  I turned on the computer and tried to start it again, and the computer started fine.
  The image appeared and the problems disappeared.
  But I knew that something bad was about to come so I took the laptop computer repair technician.

  I told her what happened.
  He has used the vacuum to "clean" the dust of the computer and told me to go back if the computer kept a overheating.

  I restarted the computer again when I came home, and after an hour and a half the computer screen turns white but I don't think that it overheated. : s

  I tried to start the computer and the screen is black, no picture, the only light on is the power one and I hear the vents work. I tried of transformed market but now it just stays as if it were now.

  I tried on another computer for solutions such as the battery and pressing the power button for 2 minutes and other things, but nothing has worked. I don't know what to do so I decided to create a thread to get answers: s

  Please help me, thank you!

  PS: I'm sorry for my English, I know that's not the best

  Hello

  This does not sound very good boyfriend. I'm afraid that there could be some sort of dysfunction material Mr. something like the problems of graphics card or motherboard issue.

  You can try plugging the external monitor to the laptop just to see if something would be visible on 2nd screen.
  But if nothing will appear on the 2nd monitor, I think that the chip of the graphics card died :(

  Of course, this is just my personal opinion and a laptop computer technician must check the laptop to know what part of the laptop could be faulty.

• AT300-100 - speakers and sound problem

  Hello.

  I bought a Tablet AT300-100 and have problems with the speakers and the sound. I noticed other people online with similar problems.

  Here are the problems:

  -The speakers stop working, and the Tablet needs to be restarted for that stakeholders to work again.
  -The noise increases abruptly volume for a few seconds, then returns to the normal volume.
  -It has no sound when I get a PIN on the lock screen, even if the is set to turn the sound on the lock screen.

  I wonder if this is a bug in the operating system rather than a problem with the hardware of the speaker.
  The operating system is up-to-date. Problems continue regardless of the sound settings.

  Any ideas?

  Thank you.

  > I wonder if this is a bug in the operating system rather than a speaker hardware problem

  By default, the system Android back and try it again
  Usually, if it would be a software related issue, the sound should work correctly after the reset to default settings.

  > If there is a bug in the operating system affecting the speakers, a reset may not work.

  Well, in this case, that you should get in touch with the service of Toshiba to get it checked

• Satellite L750D - update BIOS 2.1 and its problem

  Hello

  I have little problem. I was downloaded from your website 2.1 BIOS for Toshiba Satellite L750D (PSK32E).

  I have been updating BIOS 2.1 and start the problem with the sound. When I start the game, music or else minutes 2 first sound plays correctly but then it stops without reason. No noise at all. I've been reinstalled op system but the problem is still there.

  Sound works for 2 minutes only then is completely off. Each application to start with sound plays 2 minutes and stop all silent is. I did a probe on my laptop the mother she s a computer portable twin. I have updated bios same problem 2 minutes and then no sound. My OS is win 8 64 pro my laptop mother is with win 7 x 64 premium.

  Two BIOS updated ver 2.1 on L750D and the problem is the same. Please fix the BIOS.

  The BIOS seems to be very old. I was released nearly 1.5 years ago, so to be honest, I doubt that his and BIOS problem.

  I had the similar problem with my other laptop equipped with a Realtek sound card.
  The sound appeared after connection and remove the headphone jack
  But I could solve this latest installation updated audio driver the Realtek driver page.

  But it seems that your Satellite does not support Realtek audio chip but the Conexant audio chip.
  Therefore, the solution could not be useful for you.

  However, I think that you need to update the audio driver. I recommend you google for driver Conexant SmartAudio HD and test the latest version of the driver available.
  On the internet, I find the Conexant SmartAudio HD driver version 8.65.9.51 for Win 7 / 8 Win / Win 8.1
  Not quite sure if this is the latest version, but you can test it.

  To manually update your driver:

  1. go into the Device Manager (right click on my computer, choose manage and then find Device Manager in the left panel)
  2. right click on the device you want to update and choose Update driver software
  3. choose Select the location of the new driver manually and navigate to the folder where you downloaded the driver

• IOS 9 copy and paste problems

  There are many messages about the problems afflicting the feature copy / paste. There are also many recommendations on the web to work around or how to reset your device. What I want to know, Apple has never acknowledged there are problems and they are working to solve?

  No thanks posted by Apple and no problem with C/P on many devices for me or anyone I know.

  Please post a link to these positions of "many".

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• iPhone 5 activate without sim card and the problem is average insert a SIM card when sim carn as invalid sim

  iPhone 5 activate without sim card and the problem is average insert a SIM card when sim carn as invalid sim

  Fast pleas tell me

• With key and mouse problems

  First of all, I would like to turn off the box that appears when I place the mouse over an icon.  Several times he gets across what I'm trying to read and many times he says exactly the same thing as the icon.  How do I turn it off?

  Secondly, I have a laptop, and so have a touchscreen tablet.  My mouse seems to float itself or sometimes she does not respond to my touch or tap, and I touch or hit harder.  I watched my mouse properties and everything is correct and answer correctly.  There monte load static or is - it because my finger is too dry?  I am very frustrated and confused.  I hope there, can someone help me.  Thank you.

  Hi margin,

  What is the brand and model of your laptop?

  I suggest to follow the steps below and we update on the State of the question.

  We will clear the display file size information in folder under Folder Options ends and check if you get the file information when you place the cursor over the folder.
  

  a. start Microsoft Windows Explorer.

  b. on the Tools menu and click Folder Options.

  c. click on the view tab.

  d. Click to select or deselect the option information to display in the ends of file file size .

  On the question of the mouse, refer to the suggestions from this link.
  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  After completing the methods suggested above, answer us with the State of the question.