Hardware scanning Y700 14ISK error

Similar Questions

• My Dell hardware scan failed the Smart short Test and gave me an error WHD16-K8B and says 'failure may be imminent.

  Title: Hardware failure

  My Dell hardware scan failed the Smart short Test and gave me an error WHD16-K8B and says 'failure may be imminent. What can I do?

  Hello

  1 have had any changes made on the computer before the show?

  2 are you facing any problem with the hardware?

  Method 1:

  I suggest to see the link and try to run the troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  See the article and check if that helps:

  Diagnostics of Dell hardware

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_362645&isLegacy=true

  If the problem is not resolved, contact the manufacturer for additional assistance:

  http://support.Dell.com/support/topics/global.aspx/support/hardware/hardware_portal?c=us&CS=19&l=en&s=DHS

• Photosmart 7510 everything works except the scanner. scan reported an error Impossible to open the sessio

  scan reported an error "Unable to log on to the device" I really need to get access to the whole reason for this purchase scanner.

  I downloaded the updated HP for Mac drivers and the printer has been installed without any additional problems. Thank you

• I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  If the SFC does not a repair installation should work.
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.HTML?filter>

• mode scan interface - 805 error

  Hello

  I am a beginner system Compact RIO. The on I have a few questions scan mode interface.

  The only plug-in hardware is

  The cRIO-9012 controller and chassis integrated cRIO-9101

  a map AI 9205

  a card DIO 9401

  I would like to use the scan interface mode to understand the functioning of the cards, the in FPGA interface mode, it takes time for the compilation.

  The chassis does not support the interface mode scan, so I set up 2 cards variables individually using the I/O. Then I create the VI United Nations simply to read the voltage level of the card HAVE. I get an error - 805: source of synchronization, synchronize with the scan engine.

  I also checked in MAX, scan of OR soft the engine is installed.

  Could someone tell me this problem?

  Thanks in advance.

  Lily

  
  

• HP C7280 All in One printer: HP Scan of the error using HP C7280 all-in-one printer

  I was scanning documents successfully until recently.  I use a Mac with OS X 10.7.5 and receive the following error message when you use HP Scan.

  Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.

  -Restart the program.

  -Close all programs that might be using the device.

  -Restart the computer.

  I tried to download several drivers without success.

  Any help would be greatly appreciated.

  Hello @kellycc,

  Welcome to the Forums of HP Support! I see when you try to scan with your HP Photosmart C7280 with your Mac running the 10.7 operating system, you get an error "cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.'.

  Complete the following steps:

  Scrub / uninstall

  • Open the Applications folder > folder HP or Hewlett Packard > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers. Hold down the command, Option , and command, while now the three buttons.
  • Click on Uninstall.

  Reset the printing system

  1. click on the Apple icon ( ), then click on System Preferences.

  2. in the hardware section, click Print & Fax/scanning. The Print & Fax/scanning dialog box opens.

  3. make a right click (or Ctrl + click) in the left panel and then click on reset printing system...

  4. click on OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol...

  Repair disk permissions

  1. on the Dock, click Applications, then utilities.

  2. double-click click disk utility.

  3. highlight your hard drive / partition on the left (by default this is "Macintosh HD").

  4. click on the button to repair disk permissions at the bottom of the window.

  5. once the repair is complete, restart the computer.

  Restart the printer. Now, you will need to install the printer driver using the Apple updates. Click on the link below and follow the instructions on the screen:

  Installation of your printer driver HP and software for Mac OS X

  I hope this helps, please let me know the result!

  Thank you

• Realtek NIC does not show in the Device Manager - until a hardware scan is done

  A few months ago, I purchased a dv6 3240us and not downgraded to XP Pro win7 no problem, everything has been installed - everything I tried worked fine without any problem at all. I do not use this computer on the Internet - but I got the opportunity to connect the NETWORK card to a piece of equipment, I was working on that. When I went to change the IP address of the laptop - no local NIC (supposed to be Realtek) present in the Device Manager.  I installed the driver when I went down to XP without error.  I can only see the wireless adapter and it also shows on the system tray. When I right click on network adapters in Manager devices and do a scan for the hardware - the Realtek card is? and now everything works fine until I stop, then I have to go the process again. I watched the Realtek driver and he says its all working properly - any suggestions?

  Hello:

  I'm not familiar with the BIOS settings too consumer laptop, but see if there is a setting for a LAN Power Save Mode - maybe in the configuration menu of the device.

  On HP Business laptops, there is such a context, and the default value is enabled. What is this setting is to remove the wired NETWORK card at least that the PC is plugged in and connected to a LAN cable. This saves battery power.

  They also have a LAN/WLAN definition switch that disables the NETWORK adapter when the other is in use. For example, if I plug a wire to my Wired NETWORK card, my wireless NETWORK card is automatically disabled.

  If you have such a LAN Power Save setting, turn it off, and your NETWORK card must always be visible in Device Manager.

  Paul

• Printing/scanning HP 403 error

  My challenge seems to be well noted by others... tried to restart my entire system... Please send secret instructions.

  Thank you.

  Hi @karebear

  Welcome to the Forums of HP's Support. I understand that you get a connection error message. I assume you get the error message when you try to use the scan to E-mail feature of your HP printer.

  I'm guessing that you have a Photosmart printer or desire. Please set a manual IP manual and address of DNS server for the printer. I've included a link to another post which has measurements, including screenshots, on how to do it. Don't worry that the screenshots show a printer Photosmart 7510, the steps are the same.

  Please let me know the results.

• the scan to pc error - photosmart 5520

  I can not scan from the printer to the PC, the printer detects the computer but then it says that there is a connection error. However, I can print, scan to e-mail,... without problem.

  I installed and unisttalled the software twice but no avail. I tried the scantopcactivationapp.exe program, but it does nothing.

  How can I solve this?

  Thank you.

  See if these solutionsresolve the scan connection problem you are experiencing. Let me know if it helps!

  Thank you

• ThinkPad L540 - hardware scan has detected one or more failure CODE: WHD01V002-WK7X0I

  Hello. After harware found last scan problem with disk hard error code: WHD01V002-WK7X0I. Targeted reading test has failed. It is the important issue? Could you help me? What can I do now?

  Thanks for your reply :-) I use, it was found no problem :-)) I thank very you much. This analysis of harware scare me :-(

• cRIO 9068 + Scan Engine Support error - even if it is installed on the cRIO, after the deployment of error says his lack

  All,

  I have a cRIO-9068 I try to use the scan mode for. I have intalled all the latest drivers and software as explained. However, when I put my chassis to scan mode, then select deployment all, I get this error on my chassis and all my modules:

  "The current module settings require a NI Scan Engine support on the controller. You can use Measurement & Automation Explorer (MAX) to install a software package recommended NOR-Rio with NI Scan Engine support on the controller. If you installed LabVIEW FPGA, you can use this module with LabVIEW FPGA by adding an element of FPGA target under the chassis and drag and drop the module on the FPGA target element. »

  Everyone knows this or know why labVIEW does not recognize that the software is installed on my cRIO or is it not installed correctly?

  AGJ,

  Thanks for the image. I saw a green arrown beside all my pictures of chip and it seemed that meant that the software wasn't really being installed. I formatted my cRIO and did a custom install. My problem was that I had the two labview 2013 and 2014 installed and the cRIO put conflicting versions of software. After doing a custom installation and choose only the versions of 2014, my picture now looks like yours!

• Photosmart 6520 all in a single pri: scan to email error

  I am trying to scan to email, but an error message connection server 403 error. There was a problem connecting to the server.

  Help. I need to scan documents.

  Hey @twoz923,

  Thanks for posting in the Forum from HP Support.

  I understand that you are not able to scan to email using your 6520 HP Photosmart e-all-in-one printer.  I would like to help.  I have a few troubleshooting steps that can restore this feature.

  First of all, is your printer connected to your wireless network?

  • From the front of the printer, press the wireless icon -make sure that it displays an IP address indicating that you are connected to your network.  If so, proceed as described below, if you are not connected, click here to learn how to fix.

  Then, are your webservices enabled?

  • Front panel of the printer, press the icon shown in the image below:

  

  • If the printer displays an address [email protected], your Web services are enabled.  If this isn't the case, tap Activate Webservices and press OK to enable automatic updates.

  If you encounter a problem with the activation of the Web services, I recommend that you try to set a manual DNS address for your printer. Often, I find this useful step when working with printing and scanning to E-mail configurations.  It will strengthen the ability of your printer to make a secondary connection with your router.  My friend @PrintApper has asked the steps to set a manual DNS in a post on the Forum - click here to access and scroll down for 'E.      Set a manual IP/DNS server settings of your printer. "

  Once you have enabled Web services, tap the Scan icon to complete your analysis of the configuration of e-mail.

  Please let me know the result of your troubleshooting by responding to this post.  If you encounter other obstacles of installation I am always happy to help you.

  Have a great day and feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below, if I solved your problem.

  (edited for formatting)

• Strange "Scan chain" Timestamp error

  Hello

  I try to analyze my time string in a timestamp with 'Analysis of the chain' but I have some Error (1) strange.

  Code:

  

  The error:

  

  can anyone confirm? have I not a mistake in my string parser?

  It may be due to this Bug

  461196

  Scan chain VI returns 1 error with '%t' as the input format string

  http://www.NI.com/product-documentation/52151/en/

  This should be fixed?

  my version of labview is

  LV 2014 SP1 - Version 14.0.1 (32 bit)

  with the addon in real time (but the code in question was not executed on RT)

  Thanks for your time.

  Why do you have the square brackets around the string format string analysis? They aren't there when you generate the timestamp string if it fails when you try to convert as soon as they are supposed to be there.

• HP PHOTOSMART 4795: Photosmart 4795 Driver Installer - USB Hardware/Software not found error

  Im running on an Imac bootcamped with win7, downloaded the driver on the site of hp directly support, and this is the first ive problem in a year and a half. Setting im here looking at my device driver details, all this so far and active, and still refuses the installation. I tried, futile full, contact any staff on the issue, and this is my last straw, so to speak. I am a student and I can go without a printer works at home any longer. The error reads as follows:

  -------------------------------------------------------------------------------------------------------------------------------

  HP - Photosmart series C4700

  Results of system requirements

  This computer has been verified to the system requirements to install this product.

  [X] this system does not meet one or more of the minimum requirements for the installation of this product. The installation cannot continue.

  Requirement

  USB DRIVERS

  Details and advice:
  This computer does not have the necessary support from the USB software to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.
  Action required: click Cancel to exit this software installation. In order to install the devices such as a USB device, please refer to your computer documentation or the documentation of expansion card USB for more information on usb drivers.

  USB DEVICE

  Details and advice:

  This computer does not have the necessary support of USB hardware enabled to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.
  Action required: click Cancel to exit this software installation. In order to install the devices such as a USB device, please refer to your computer documentation or the documentation of expansion card USB for more information on usb drivers.

  -------------------------------------------------------------------------------------------------------------------------------
  The help button next to "Retry" in the lower left is grayed out, and the options 'Back' & 'Continue', leaving only "try again" or "Cancel". There is no error code, no other signifiers that might lead me in the right direction.

  Please, any help or speculation is welcome, I'll try salt and wise at this point. And thanks in advance.

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi

• Scan HP 6500 error has

  HP6500A scan: error message: cannot load the pdf file.  How to correct?

  Solved by installing software HP of Apple.com.  No idea why this has become necessary.