Mini 1000 headphone audio poor fix!

Hey guys,.

Obviously, the people who run MI know that the poor quality of the sound in the headphones is a software problem, but he had not much info for the 99% of us under XP. Well, myhpmini.com people find a solution, so I thought I'd share the info. Apparently the XP drivers for the IDT HD audio codec have some type of audio the high pass filter setting to protect the speakers. Obviously totally unnecessary given laptop computers have been made for years without, especially if you want to connect to your stereo. In any case, if you install drivers for the device audio vista, it will solve this problem! I can only assume that, because vista is not a native operating system, it is unhindered. Here's the direct link: sp40714.exe. Before you run this, you'll want to uninstall IDT audio from the Add/Remove Programs list. Remove the IDT high definition audio CODEC of audio, video and game controllers in Device Manager. Otherwise, you might get an error when trying to install these drivers. Now, go enjoy the range sound quality!

dancertified,

I have a HP Mini 1000 XP and I tried to load the Vista IDT Audio because drivers drivers XP IDT created in very poor sound quality.

The pilot appeared to have loaded correctly.

When I tested the Audio, it sounded excellent.  However, when I tried to connect any USB device or SD card in the unit, he did not know how

to load these drivers.  He kept asking to load new drivers, and no matter what I tried, I wasn't able to get them to load.

I started from scratch (what a pain) and re-formated / loaded XP from the recovery disk and tried again, and it happened again.  Big noise

Vista drivers, but does not recognize the USB or SD devices existing or new.

So, I wouldn't recommend installing audio drivers IDT of Vista on XP.

Unless you found a way to circumvent the problem of driver that I lived.

Tags: Notebooks

Similar Questions

  • HP Mini 1000 MI Audio

    I am the proud owner of a HP Mini 1000 mi, and I must say, so far I've been very happy with it, except for a few small issues.  The main problem is the audio quality, I can understand the speakers being weak and must use that they are quite acceptable, but when I'm in a public space and I like to be able to use the helmet, for some reason the audiojack has very, very poor audio quality.  Even with a pair of bose headphones, there is absolutely no bass, sounds almost exactly the same built-in speakers, I tried to test a pair of headphones usb audio and a pair of usb speakers, but they were not correctly recognized and I did not want to spend a lot of time trying to get them running. I think that audio problems may not be a hardware problem, but rather a software one, a form of filtering audio to do his best on the small speakers remaining filter the bass even in the audio output.  Can someone give me some advice on what to try?  Any ideas would be great, thanks!

    Sohier

    Hello.

    Good tip!  I found your posts very useful.

    I was experiencign the same problem and seem to be sorted. I started on a Live CD of Linux (Ubuntu 8.10) and the sound was perfect, so I knew that it was not a hardware problem. I tried to call the HP support but lacked at the time and he doesn't go anywhere.  Armed with the tips in your post, I restarted in OS of HP and made the following:

    (1) hit: Alt - F2

    (2) type: gnome-terminal

    (3) at the command prompt: sudo apt - get remove idt-alsa-eq-plugin

    (4) after that the packages are removed, type exit to close the terminal

    (5) reboot

    At this point, for me, the sound was normal.  (Well, the speaker has still no - bottom, but at least the headphone jack works well.)

    You are finished.

    If you wish, you can always cancel the foregoing in following:

    (1) hit: Alt - F2

    (2) type: gnome-terminal

    (3) at the command prompt: sudo apt - get install idt-alsa-eq-plugin

    (4) after that the packages are removed, type exit to close the terminal

    (5) reboot

    Hope that helps!  Take advantage of the Mini.

    --

    Update of the post: I initially also recommended the removal of the package: idt-alsa-aec-plugin.  Sohier stressed that he is innocent and that idt-alsa-eq-plugin is the only culprit.

    Message edited by benmhall on 02/11/2009 10:24
  • HP Mini 210 Netbook headphone Audio Combi Socket Port

    NetBook HP Mini 210 has a SINGLE taken 4-pole (PLUG) 3.5 mm headphones Audio Combo.  All the headsets have TWO 3.5 mm 3-pole (TRS) care; One for headphones and a separate for the Microphone.

    OK, after a few tries, the solution is now obvious!

    The pinout of the connector 4-pole Combo does not follow the AV cable (standard), where the body of the plug is on the ground

    It's more like the Canon AV Cable camcorder where the Ring2 is the Foundation and the body is the Mic (video on the Canon cable). Below specified connections to work perfectly:

    4 pole socket Headphone jack. MIC Jack                          

    Trick trick (left Audio)

    1 ring (right Audio)

    Ring 2                                   Body                               Body

    Body                                                                             Tip + Ring

    Make sure that you use a 4-pole plug bodied plastic because the body is the Mic (Live) connection and could cause interference if touched

    I hope this help those who meet this problem.

  • HP Mini 1000: Factory Reset

    I have a hp mini 1000 with an operating system windows xp and im trying to do a factory reset/recovery but I'm not sure how or where to do it. some much need the files and drivers have been removed and I need to reset to restore these files can someone help me with this problem?

    Ok:

    If the driver is installed, but the device has a problem.

    What you can try is to uninstall the device (right click on it and select uninstall), then reboot and install this driver and see if that fixes the problem.

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3688870&swItemId=ob_101092_2&swEnvOid=1093

    I don't know why the file is in French.

  • HP MINI 1000 Webcam very dark

    Why is the webcam on the mini 1000 very dark.

    Are there solutions for the future or present solutions available? I searched without a bit of luck.

    THE POSITION of FINAL SOLUTION (Please paste this into the first page)

    With all due Respect, this thread is turning into a hell hole of misinformation.   There is a massive confusion on two simple solutions to this problem.

    THE PROBLEM: HP designed this for a webcam webcam 'outdoors' by affixing a piece of dark, tinted 1 cm x 1 cm of Ribbon in front of the web cam, behind the screen overlay.  These shades the video extremely dark in all conditions except in natural light of the Sun.

    #1 SOLUTION: install the software that allows you to control the brightness/gamma.  If you increase both, your image will be slightly higher. Software options include (scroll to previous pages for links) Skype, MSMessenger, controls integrated Windows Movie and the HP Webcam Driver free (linked to the page 1 or 2).  THIS SOLUTION IS NOT A SOLUTION.  IT IS A MINOR SOLUTION AND YOUR WEBCAM WILL LOOK STILL DARK AND GRAINY, but it will be a little clearer.  HERE IS a LINK to THE OFFICIAL HP driver which is free and allows control of the brightness/gamma.  It's a quick download and easy installation.  Yet once this is only a partial solution: the official HP camera settings: ftp://ftp.hp.com/pub/softpaq/sp35001-35500/sp35414.exe

    SOLUTION #2: it's the only real solution.  Just open the top of your screen (it's super easy to make and the screen is designed to be opened and closed).  Take a pair of pliers, tweezers and remove stained tape that causes all the problems.  Problem is fixed at 100%. I do not understand why why so many people are so adamant against trying this.  This isn't major surgery.  You literally pop open the display (no screws or anything necessary), and you take a pair of tweezers and pluck a piece of thin ribbon.  That's all.  The unit will work perfectly without additional software or hardware changes.

    This is a great how-to with a video: How to remove the color ribbon

    How do with images on the other: How-to's

    Note that you can do both.  #2 solution will fix the problem of obscurity.  #1 sOlution will give you more controls.  My suggestion is to carry out the withdrawal from the Strip to solve the problem of dark camera, and then install the driver of HP to give you even more control camera.

    UNLESS YOU HAVE A NEWER SOLUTION, MORE INNOVATIVE TO THE PROBLEM, PLEASE DO NOT POST THE SAME THING MORE AND MORE ONLY SAYING ILS ARE A NEW SOLUTION.

    Message edited by SchnellFowVay on 02/17/2009 09:31
  • HP Mini 1000 XP loss of disk space!

    I have the HP Mini 1000 XP base model and love it.  I use Norton Internet Security, iTunes and Picasa 3.  But for some reason, I lose local C: drive disk space.  At this moment I have about 500 MB.  I was at 90 MB (!) before a little lower, I read a tip on the Web to set the parameters of system restore.  Which I did and got immediately bumped upward to the high lombardo.  But I still seem to lose space weekly.  I always remove my itunes and photos Picasa downloads.  I also delete cookies and temporary internet files on all three weeks.  And I defragmented/compressed disk, but who did not have much.  Java keeps asking me to download and install the new update and I'm like "NO!  I'm getting a more slightly obsessive on my MB.  My space can be upgraded?  If so, how?  Are there ways to find hidden files?  Maybe what I deleted was not, even if I saw them in the trash.  Another that the question of space, I love my Mini - and feel that I should get a tip for all potential customers, I'm headed your way!    I thank very you much for your help and advice!

    A very easy solution is to set the min and max paging file to 1024 MB (1 GB), which is a lot. You could even go to 768 or 512 in my opinion a little more extra space. Right now, you have a dynamic (changeable) paging file that is larger than necessary. Define the number that is now 1500 something and the number which is now 3000 something 1024 768 or 512; apply and restart. You should immediately have an extra concert half or more space, then. Setting the pagefile on a fixed number, it is also a fairly well-known performance tweak that helps the computer run a little faster.

    If you are looking for *.jpg (wildcard for all images), you can be sure that you see all the pictures on the hard drive.
  • MIcrophone on HP mini 1000 does not work do not with Ubuntu

    I have a HP mini 1000 with Ubuntu installed on it.  I tried to use the microphone, but it does not work...  I don't know if she just because I do not have the right drivers, or it's broken...  So I wonder where I could find the right drivers (or if there is a fix), or weather I should just send it to get fixed.

    Thank you.

    P.S. - If you need more information about it, just tell me.

    Hi all -

    Creative image HP MIE was published today online!

    http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2020&LC=en&DLC=en&cc=us&product=3877034&lang=en

    Detailed instructions are on the site.

    -MiniChic

  • HP Mini 1000: hp mini 1000 (1151nr) bios password

    Please help me I get the current password CNU928B2Q0 on my HP mini 1000 thanks

    Hello

    Enter e9lo7up751 (3rd character is a lowercase L)

    Kind regards

    DP - K

  • HP Mini 1000: HP mini 1000 obtaining bios password test failed

    HP mini 1000 get bios password check failure fatal system error stopped CNU9162D2D

    Please help cannot get into bios or open a session

    1151nr model

    At the password prompt try > > e9lo3g7t7t

  • Questions of mini 1000 XP/MIE

    So, I recently bought the Mini 1000 XP version and have just discovered that there is a CRUMB version.  After looking at some of the magazine vids on some blogs, the MIE interface seems incredible and very elegant.  I was wondering if its even possible to change my XP for the CRUMB version when it comes out via a download or a cd?  Or am I a little stuck with the XP operating system...

    N °

  • HP MINI 1000: Reset Bios Password HP Mini 1000 CNU9263R9J

    My girl reset then forgot Bios password on the Mini 1000. Help, please

    Reset the Bios Password HP Mini 1000 CNU9263R9J

    @Flash6791

    Enter: e9lo7gfbow (3rd character is a lowercase L)

    Kind regards

    DP - K

  • HP Mini 1000: resetting the Bios of HP Mini 1000

    Hello

    I use a HP Mini 1000 that someone changed the Bios password and I have no idea how to reset it, Please help.

    HP Mini 1000

    Its gives me this after 3 attempts: CNU9153CXM

    @ThaboNel1

    Enter e9lo3qfe44 (in both cases, the 3rd character is a lowercase L)

    or
    e9lo3qfer4

    Kind regards

    DP - K

  • HP Mini 1000, model: 1199EV: bios password HP Mini 1000

    Technician im a PC and I need the default password to access a HP Mini 1000 for a client of mine.

    the model is: 1199EV

    s/n: (deleted content)

    Thanks in advance

    @WizZarDsFrEE

    Enter: e9lo317xwt (3rd character is a lowercase L)

    Kind regards

    DP - K

  • HP mini 1000 PC

    I have a hp mini 1000, I have not used in a while so I forgot my password! It keeps saying & amp; amp; quot; fatal error... System stopped. CNU9075DKL

    try this master password for your mini (be sure to type the correct number/letter) > e9lo1xqtsk

  • HP Mini 1000: BIOS HP Mini 1000 unknown PW

    HP Mini 1000 BIOS PW unknown.

    Password check failed

    Fatal error... System stopped

    CNU9264MCS

    Thank you!. It worked! I was about to throw this thing out the window

Maybe you are looking for

  • THIS COPY OF WINDOWS in NOT ACTIVE but no activation Wizard message

    Our Lenovo computers (PC has been used for two or three years) began to show the message that "this copy of windows is not enabled, in order to be properly operated under license from this copy must be enabled ' but I didn't activate the windows opti

  • Code of Windows 7 not genuine error 0xc004e003

    I have tried to re - activate my windows product key and got error 0xC004E003 code. What should I try now? Diagnostic report (1.9.0027.0):-----------------------------------------Validation of Windows data--> Validation code: 50Validation caching Cod

  • [Widget] createNewDir not working in Simulator/device?

    Hello I have a simple example Widget index.htm Untitled Page Create Dir config. XML My Widget Me I tested the widget in the Simulator (BOLD 9700 5.0.0.54 5 credits) and on a real device "BOLD" 5.0.0.41 900-1, but the record not be created. What I am

  • Command and Conquer

    Help! Ive decided to live my teen years and have obtained a copy of the first command and conquer game, the problem is obvious is his 95. Im running windows 8 on my laptop, when I insert the disc, it opens the files stored on the drives ok, but if I

  • Adding files MP3 to HP MediaSmart

    Hi- I have a folder of mp3 files, I can't HPMediaSmart to recognize. I have Windows 7. I added in the Public Music folder and also added the folder to the list of folders in the settings. I don't find any option to import or browse for the files, I c