Mini L9W - B satellite. How to choose what battery to use?

Similar Questions

• How to choose what Firefox 5 profile will use when it opens?

  I have several profiles in FF5. At each opening of FF, it opens with a different profile. So, how to choose what Firefox 5 profile will use when it opens?

  Type, it is in the Run dialog box: firefox.exe - p. This will bring up the Profile Manager where you can select the default profile. (See the screenshots)

• Does anyone know how to change CMOS battery is used in a Compaq 6515 b?

  Does anyone know how to change CMOS battery is used in a Compaq 6515 b?

  Hello

  This is the RTC battery on the book next (page #66):

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c01566982-9.PDF

  Kind regards.

• How I choose what LAN (2 different local networks) to have access to the internet?

  I have 2 Ethernet network cards on my PC.
  I would like to know how I can choose what card (LAN) internet connection.

  See also this and this.

• Mini L9W - B satellite - cannot update BIOS running Windows 10

  Click Mini L9W - B with Windows 10.
  Everything works fine, but I can't update the BIOS to 5.20, via the Service Station or for download on the Toshiba site.
  Process gets as up to now by clicking on Yes to UAC... then nothing.
  Any suggestion is appreciated.

  Thank you.

  I have the same problem, also with Win 10.

  Meanwhile, the keyboard no longer answers.

• -Pop-up menu (allows you to choose what program you use to open the file) when you insert sim or cd does not appear

  When a disk or sim card or data storage device is connected to the computer there should be a menu pop up that allows you to choose which program to use to open the file. This is no longer the case. Any ideas how to restore it?

  Hi John,.

  1 are you referring to AutoPlay settings in Windows XP?

  2. did you of recent changes on the system?

  If you are referring to AutoPlay settings in Windows XP, you can see the following article in Windows XP to enable the feature.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  You can also consult the following article:

  How to change or choose the program that starts when you double-click a file in Windows XP

• How to check what database is used by VMware Virtual Center?

  Hello

  I recently inherited a small environment and I was asked to upgrade ESX 3.5 to ESX 4.0. I'm not a person from the database, but how can I check what database is used by VMware Virtual Center? According to the guide to upgrade the MSDE database is not supported in ESX 4.0.

  I want to just make sure that we did not use this database. I looked in the ODBC Data Source Administrator. Thanks to the system DSN, I saw that the drivers for Vmware Update Manager and Vmware Virtual Center are "SQL Native Client". Also registry editor, I watched HKEY_LOCAL_MACHINE-> SOFTWARE-> VMWARE, INC.-> VMware Virtual Center-> DB. Data on 'Vmware VirtualCenter' next to '1' and '4' is set to "SQL Native Client".

  So, how can I determine if the database used is not MSDE?

  Sorry for the stupid question, but I'm not so much with the databases...

  Thank you.

  Den...

  > So, how can I determine if the database used is not MSDE?

  MSDE does not remote databases.  ODBC Open, click System DSN, click Configure.  The listed database is that it uses, and if that is the name used for virtual center, this is the database in use.

• Equium M50 - what battery can use?

  I need the difficulty in identifying what battery for my m50 equim series.
  My battery part number is pa3399u-1brs.
  On the toshiba site it lists one - 2brs which toshiba said it would be fully compatible.

  Another officer told me today that I need a pa3465u-1brs since the 3399 is abandoned.
  Audit of the etc Web sites the 3399 is still there for different sites.

  Can anyone tell me what battery should I get. My laptop is a range of m50 Equim

  Thank you all... robin

  I found this battery compatible:
  PA3399U-1 b * S - 10, 8V - 4300mAh

  Possibly, it is an old part number and now the new battery is out with the latest issue of the piece.

  To be honest, you should trust the service provider authorized in your country. They should be able to order the compatible battery and support for lacrosse head of Toshiba.

• How to choose what syncs on your different computers

  Hi, I just transferred more of xmarks at their suggestion. I have a few questions on the synchronization works. I have two computers and an iphone I want on my network. As I understand, I've set up three names of the devices under a user name.
  However, does that mean that when I merge my files at home with my working files, the next time I sync my work computer, it will be all my favorites of the House as well? And will be both my job and my home bookmarks bogged down my iphone? On sharing bookmarks between computers? If I find a bookmark at work that I would like to move to the home computer, I can do this?
  Alternatively, remain one of the other, each synchronization registered under the name of device, all bookmarks and Favorites never see each other? How to move SOME of my favorites on the iphone or another device? In others, is there a way I can control what Favorites, passwords, etc. are moved and merged on separate computers? How would I do that?
  Thank you very much for taking the time to read my request. I hope hear from you soon and learn more about this program works!

  See this - http://blog.xmarks.com/?p=1886 - Xmarks cannot be turned off, if enough users registered to donate to contribute at least $10 per year.

  See this support article:
  
  https://support.Mozilla.com/en-us/KB/how+to+sync+Firefox+settings+between+computers#Using_Firefox_Sync_after_signing_in

  Under use my custom settings on each device, you have the option of what types of data, you want synchronized with your other devices.

     * Bookmarks
     * Passwords
     * Preferences
     * History
     * Tabs
  

  During this that synchronization can not handle specific parts or groups of data per unit, it's all or nothing. When you "sync" a category of data with the server, all that data gets downloaded - no way to specify which bits of data doesn't get downloaded. At the level of the synchronization server that the data gets merged with the data from other devices, each device so has the same data.

  IOW, if you synchronize your bookmarks, all of them will be synchronized and with the features of this option is selected. There's no way to filter the Bookmarks 'House' Bookmarks 'working '. The only way around this is to have separate Sync accounts and separate user profiles in Firefox on the PC to 'work' and 'House' of data sets; and who will probably not work on the iPhone (don't know about you, does not have an iPhone).

• When you use a left and right axis, how to choose what issed axis for the value of y GetGraphCursor?

  I use a graph with a left and right axis (2 data sets).  I try to use a slider to select a point in time (x) and the values of y in the two sets of data.  I can't understand how the control, the value that is returned for the value is when you use the GetGraphCursor call.

  GetGraphCursor (panelHandle, PANEL_GRAPH, yourCursorNumber, & x & y)

  Using SetCursorAttribute with the attribute ATTR_CURSOR_YAXIS must be what you are looking for. The online help for this attribute explains wery well:

  Description: Used to change the y-axis which is associated with the bar graph.
  When a graphics cursor is created, the Y axis with which it is associated is determined by the value of ATTR_ACTIVE_YAXIS.  Subsequently, the association can be changed using ATTR_CURSOR_YAXIS.
  The y-axis associate serves as reference for the coordinates of the cursor position in calls to SetGraphCursor and GetGraphCursor.

• BlackBerry smartphone how to choose what e-mail account to send

  I have a 8330 from Verizon. I have the option enabled company and send and receive e-mails from my very good corporate email server.

  However, I also created my personal account on the BB. I get personal e-mails as well. But I want to be able to send emails via my personal account. At present, all emails sent through the company, that I * don't * want to happening.

  How can I configure the BB so I can choose which account to send from email?

  Thank you!

  Open your personal e-mail and send a message from here, it should also be a separate icon, all messages will go into your main folder, but it must be in this BIS account to send from this account BIS.

• How to choose what program plays what, where sound?

  Hi all

  First of all, I don't know if this is the right topic, but I couldn't find other technical subjects or something similar.
  Runing windows 8 Pro and I had also a headset (USB connected) and audio (HDMI connected), but I can't select what program to play where the sound. Now, I prefer to have all the music and movies played on systems of sound and communications such as Skype, Ventrilo and Teamspeak on the helmet, which is.
  But when I play the games I'd allso favorite play the sound of some of the games on the helmet, but often games like the Sims 3 has played on the sound system.
  Is there a way to fight against this or is there some kind of software that will allow me to select what's playing where?
  Lawa Hi,

  By design, we can choose and define the different applications to play sound through the headphones and speakers of the HDMI.
   
  You can search for a third-party application that supports this feature by using your favorite search engine.
   
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Mini L9W - B satellite - Toshiba true Capture is lost - no download

  Toshiba TruCapture after upgrade to win 10 lost like all the other applications of Toshiba...

  Any idea where we can download them?

  Posted by cmvrgr
  

  Toshiba TruCapture after upgrade to win 10 lost like all the other applications of Toshiba...

  Any idea where we can download them?

  Windows Marketplace

• Is it possible to choose what div is used in the fluid design?

  OK, I've built a site that consists of sections of header and footer and three divs column - LeftDataBox, CenterDataBox and RightDataBox. I used Dreamweaver CS6 for design in a style fluid and it works well from office to the mobile phone. However, when the site was moved to the cell phone, the LeftDataBox column appears first after the header. Given that most of the content of the active site is placed in the CenterDataBox div, I would prefer if it was the first div selected instead of LeftDataBox. Is there something in DW or CSS I can apply to tell the browser to choose the CenterDataBox first? I did not bother to include code here, because it will be particularly helpful in the more general question, I ask. I can send a link to the site if that would help, but I think it's pretty simple - by default, as the divs spread on the small screen, they go from the top to the bottom/left to right. I would exchange the div containing LeftDataBox and CenterDataBox for only small screens. If the question seems irrelevant, I apologize, but have not been able to find a realistic answer after searching the Web.

  I prefer to use HTML5 tags.  Side = supervised. Article = main content.

  What I'm saying is that fglayouts are not able to order from div.  Div order depends on where you put it in the HTML markup.

  However, with the div CSS Flexbox order can be set in your queries to support like this.

  Mobile:

    header    { order: 1; }

    nav       { order: 2; }


    article  { order: 3; }
  aside.one { order: 4; }
  aside.two { order: 5; }
  footer    { order: 6; }

  Desktop computer:

    header    { order: 1; }

    nav       { order: 2; }


    aside.one { order: 3; }
  article   { order: 4; }
  aside.two { order: 5; }
  footer    { order: 6; }

  But Flexbox isn't quite ready for prime time yet.  Support of the browser so that it is still uneven. You can learn more on this topic at CSS Tricks: https://css-tricks.com/snippets/css/a-guide-to-flexbox/

  Nancy O.

• Oracle DML/Select how exactly? What process / buffer use?

  Dear,
  
  Really, I read several post on the internet, but not not clear and dose everything so I have a few Q:
  
  1. for DML: after writing the data directly in database dose files? What are the criteria and what process?
  2. If the server process to extract the block necessary and necessary updated, so when DBWR extract data from datafile?
  3 - the analysis of the information recorded on the dose library cache? the use of cache Dictionary DML, and SELECTION of dose?
  4-if I update data huge at the same time for example: 1 sheet of Melon, where it save on the journal or database buffer buffer? and if not enough dose it back up into a temporary table? or what the procedure for this?
  
  5 and this very confusion:! the dose commit happen after control point?
  
  explain to be below please... I do a lot of insertion and then validate and check the query below for a long time
  
  Select checkpoint_change # v$ database - 14026091 - control file
  Select double; - 14027831 dbms_flashback.get_system_change_number (just this change, but does not change in the control file and data file)
  SELECT name, checkpoint_change # from v$ datafile;--14026091
  Select name, checkpoint_change # from v$ datafile_header; -14026091
  
  While you see above point control of the dose will not change and reflected on order, data file... are there different types of control point in oracle! and when everyone arrives and why?
  
  6. what DBWR works exactly? What criteria?
  7 - how LGWR work exactly? What criteria?
  8. when validate you the data, and then select before the checkpoint or whatever it is, you just read the data? database buffer? or the log buffer? or online redo log file?
  
  Best regards
  Awad Awad

  Yes, the documentation, I've referenced discusses how Oracle treats DML. There is a section that explains how Oracle analyzes DML and implements the query plan. Then there's the chapter on how Oracle keeps track of the changed data, and there is a chapter on how work background processes.

  writers of the database uses lazy writes to write data to the disk. If the system crashes after the validation has been issued but before dbwr had time to writing computer change Oracle will always contain the changes after the restart as crash recovery will be rapply changes to the database data files. The basic mechanisms used are discussed in a form sufficiently detailed in the manaul of Concepts.

  There is no better place to start to read the manual of Concepts from start to finish if you are an Oracle DBA. However, a developer can probably start with the Application Developers Guide - Fundamentals.

  IMHO - Mark D Powell-