How to choose what program plays what, where sound?

Similar Questions

• How to choose what Firefox 5 profile will use when it opens?

  I have several profiles in FF5. At each opening of FF, it opens with a different profile. So, how to choose what Firefox 5 profile will use when it opens?

  Type, it is in the Run dialog box: firefox.exe - p. This will bring up the Profile Manager where you can select the default profile. (See the screenshots)

• How to choose a program to open my photos when inserting my SD card? as it doesn't give me options of this program to use differently than before, why, I don't know, so any help would be appreciated.

  How to choose a program to open my photos when inserting my SD card because it does not give me options of this program to use differently than before, why, I don't know, so any help would be appreciated.

  I know what it is, and I'm trying to answer it... will keep you posted
  your original question in a forum of Vista.

  OK... you are running XP and your computer has a media player you
  Insert the card in?

  If you go to... Start / my computer... There should be one or more readers
  listed as... Removable Disk... These are the slots of the media player.

  If you right click on the removable disk representative the memory card
  and in the menu... Choose... Properties / Autoplay tab and open the fall
  window and select pictures. And... ICT... "ask me each time to choose
  an action "." Maybe this will restore the AutoPlay window when you insert
  the map.

  You could also try... on the left by clicking on the button "Restore default settings" / apply / OK.

  And it may be worth trying to run the AutoPlay Repair Wizard.

  Download the Microsoft Autoplay Repair Wizard:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2648

• How I choose what LAN (2 different local networks) to have access to the internet?

  I have 2 Ethernet network cards on my PC.
  I would like to know how I can choose what card (LAN) internet connection.

  See also this and this.

• Mini L9W - B satellite. How to choose what battery to use?

  Hello

  I would like to know if it is possible to choose what batteries to be used when the Tablet is connected to the base.
  I prefer to use the base battery (accumulator) first front of the shelf (main battery).

  Kind regards.

  I found the problem, I'll leave the solution here.

  The problem was in fact the keyboard dock battery was not handled appropriately by the PC so when the Tablet reaches 0% battery that the computer had to close even with a full 100% battery dock.
  Try to solve it through the Device Manager was not enough and did not work.
  Updated BIOS v1.3 v1.7 fixed the problem and the battery of the dock is currently used and the priority on the Tablet as it should.

  Hopefully it'll help.

• How to choose what syncs on your different computers

  Hi, I just transferred more of xmarks at their suggestion. I have a few questions on the synchronization works. I have two computers and an iphone I want on my network. As I understand, I've set up three names of the devices under a user name.
  However, does that mean that when I merge my files at home with my working files, the next time I sync my work computer, it will be all my favorites of the House as well? And will be both my job and my home bookmarks bogged down my iphone? On sharing bookmarks between computers? If I find a bookmark at work that I would like to move to the home computer, I can do this?
  Alternatively, remain one of the other, each synchronization registered under the name of device, all bookmarks and Favorites never see each other? How to move SOME of my favorites on the iphone or another device? In others, is there a way I can control what Favorites, passwords, etc. are moved and merged on separate computers? How would I do that?
  Thank you very much for taking the time to read my request. I hope hear from you soon and learn more about this program works!

  See this - http://blog.xmarks.com/?p=1886 - Xmarks cannot be turned off, if enough users registered to donate to contribute at least $10 per year.

  See this support article:
  
  https://support.Mozilla.com/en-us/KB/how+to+sync+Firefox+settings+between+computers#Using_Firefox_Sync_after_signing_in

  Under use my custom settings on each device, you have the option of what types of data, you want synchronized with your other devices.

     * Bookmarks
     * Passwords
     * Preferences
     * History
     * Tabs
  

  During this that synchronization can not handle specific parts or groups of data per unit, it's all or nothing. When you "sync" a category of data with the server, all that data gets downloaded - no way to specify which bits of data doesn't get downloaded. At the level of the synchronization server that the data gets merged with the data from other devices, each device so has the same data.

  IOW, if you synchronize your bookmarks, all of them will be synchronized and with the features of this option is selected. There's no way to filter the Bookmarks 'House' Bookmarks 'working '. The only way around this is to have separate Sync accounts and separate user profiles in Firefox on the PC to 'work' and 'House' of data sets; and who will probably not work on the iPhone (don't know about you, does not have an iPhone).

• When you use a left and right axis, how to choose what issed axis for the value of y GetGraphCursor?

  I use a graph with a left and right axis (2 data sets).  I try to use a slider to select a point in time (x) and the values of y in the two sets of data.  I can't understand how the control, the value that is returned for the value is when you use the GetGraphCursor call.

  GetGraphCursor (panelHandle, PANEL_GRAPH, yourCursorNumber, & x & y)

  Using SetCursorAttribute with the attribute ATTR_CURSOR_YAXIS must be what you are looking for. The online help for this attribute explains wery well:

  Description: Used to change the y-axis which is associated with the bar graph.
  When a graphics cursor is created, the Y axis with which it is associated is determined by the value of ATTR_ACTIVE_YAXIS.  Subsequently, the association can be changed using ATTR_CURSOR_YAXIS.
  The y-axis associate serves as reference for the coordinates of the cursor position in calls to SetGraphCursor and GetGraphCursor.

• BlackBerry smartphone how to choose what e-mail account to send

  I have a 8330 from Verizon. I have the option enabled company and send and receive e-mails from my very good corporate email server.

  However, I also created my personal account on the BB. I get personal e-mails as well. But I want to be able to send emails via my personal account. At present, all emails sent through the company, that I * don't * want to happening.

  How can I configure the BB so I can choose which account to send from email?

  Thank you!

  Open your personal e-mail and send a message from here, it should also be a separate icon, all messages will go into your main folder, but it must be in this BIS account to send from this account BIS.

• How is - ISE chooses what IP put in URL redirection response?

  Hello

  does anyone know how ISE chooses what IP put in URL redirection response if it has more than one interface with an IP address and all interfaces are enabled in the configuration of the portal?

  I have a single ISE 1.3 PSN with all four interfaces configured, enabled, each unique VIRTUAL local network and each with a unique IP address.

  In the configuration of the CWA portal, all four interfaces are enabled.

  Clients wired to connect to n, n sends RADIUS request to ISE, ISE responds with a RADIUS response including the redirect URL parameter, which specifies the URL redirect web. The ISE configuration uses 'IP' in the URL.

  My question is how ISE to choose which of its four interfaces to put in this URL? Is it always the same interface RADIUS packets received on? Or he always chooses the first activated interface Portal? Or is there another logic? Configurable or unconfigurable?

  Thank you!

  ISE uses the first interface enabled for this site, so if want to use a specific interface, then only activate this interface.  If the interface is GE0, default behavior is to redirect the ip value domain FULL of the node name.  If interface other than GE0, then the default behavior is to return to the IP address of the associated interface.

  Aliases can be configured for each interface using the command "ip host" CLI to associate a domain FULL name/host name to the IP address of a given interface.  Once configured, ISE will return that value instead of the IP address of redirection.  This is critical if want to avoid trust certificate warning on the clients that connect.

  Do not forget that the certificate assigned to the interface includes the correct field FULL name or possibly wilcard value in fields CN or SAN to avoid warnings from cert.

• How to change what programs are other users can use it on Windows 7?

  On my laptop under Windows 7 Home Premium, I recently decided to get another user.

  I found that this new user has access to a small selection of my programs.
  How I choose which programs can access this user?

  I also found that the changes on the new office of users affect my user head office.
  How can I stop this?

  Thanks in advance,

  Rowan

  Did you create a guest user account or a full administrator account.

  Functionality is limited to a guest user account

  http://Windows.Microsoft.com/en-GB/Windows7/turn-the-guest-account-on-or-off

  http://winsupersite.com/Windows-7/Windows-7-feature-focus-guest-mode

• How to install a program?

  How to install a program?

  How to add a program depends on where are the Setup for the program files. As a general rule, programs are installed from a CD or a DVD, the Internet or a network.

  To install a program from a CD or DVD:

  ·         Insert the disk into your computer and follow the instructions on the screen.

  To install a program on the Internet:

  1. in your web browser, click the link to the program.

  2. do one of the following:

  o to install the program immediately, click Open or run and follow the instructions on the screen.

  o to install the program later, click Save and download the file to install it on your computer. When you are ready to install the program, double-click the file and follow the instructions on the screen.

  To install a program from a network:

  1. click the Start button, click Control Panel, click programs, click programs and features, and then in the left pane, click install a program from the network.

  2 Select a program from the list, and then click install.

  3. follow the instructions on the screen.

• Hello, how can I choose what image the film will show before you press play and the movie starts?

  Hello, how can I choose what image the film will show before you press play and the movie starts?

  You can not.  At least not with Adobe tools.

• When opening a file that I have to choose what program created to run and some files is read only this should not be and wont open, usually of .exe files

  This started after I tried to remove the gel frog via the control panel. After that this withdrawal, or if he asked me to choose a program to run a file I tried and I hit adobe and adobe is now the icon like any and will not open most of the files because it does not support, I can not open almost nothing except the browser explore. I was able to get my malwarebytes to come and showed some virus that I removed, but now I don't know how to solve other problems

  Looks like your Windows file associations have to dispose. This means that XP doesn't know what to do with files by looking at the file extension (.exe for executables)., .doc for MS documents, etc.  When you run Internet Explorer, it's a little different, that's why IE usually still works fine...

  If you don't have it you, something done for you - most likely malware.

  Go to this site WWW by Doug Knox:

  http://www.dougknox.com/

  On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

  Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

  Run the following scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• When I go to open a file a box comes up to choose what program I want to open with.

  When I go to open a file a box comes up to choose what program I want to open with.  At the bottom of this box is a place where I'm supposed to be able to check who always says "use this program to open this file" I can't check this box.  I open office.org and it allows to automatically save in this format.  Microsoft word program has been installed on my computer and he began to do what I said above then my daughter-in-law.  I've since removed the Microsoft Word program, but it continues to make me choose program to open whenever I try to open a document that was created after she comes to settle the Microsoft word porgram.  Now, even if I had clicked on save in openoffice.org, with that I always get this box asking me what program I want to open.  Thank you for your help.  Marilyn.

  I guess the box to "always use the selected program to open this kind of file" is grayed out, and that's why you can not check it out.  Is this correct?  Is this true for the two files that were created in OpenOffice files AND that were created in Microsoft Word (note that created is the same that that edited not)?

  In OpenOffice, make sure that the "automatic file name extension" option is enabled in the file "Save as" dialog box.

  • Click on "My Documents" (or open Windows Explorer and go everywhere where your documents).
  • Click Tools > Folder Options and then click the view tab
  • Scroll down to the bottom of the "Advanced settings" area and make sure that "Hide extensions of known file types" is NOT checked.
  • Click OK

  Find one or more files that is causing problems.  Which file extensions are displayed (3 characters after the dot in the filename) on these files?

• How to manage what programs open when I turn on my Mac

  How to manage what programs open when I turn on my Mac

  System Preferences > users and groups > Login. Unlock the padlock (bottom left), select the item you want to remove, and then click the sign less.