Mini Mac monitor

Similar Questions

• You can use old iMac as a monitor for mini Mac

  You can use 2008 iMac as a monitor for mini Mac?

  No, because the iMac of 2008 not display entered or supported to do so.

  See > use your iMac as a display with the target - Apple Support Display Mode

  You can use a connection network and something like ScreenRecycler

  See > https://www.screenrecycler.com/ScreenRecycler.html

  However, the best bet is to use a regular external monitor with the Mac Mini.

• Nobody told me that if I bought a Mac Mini I could only watch movies purchased from iTunes on a Mac monitor. Someone else meets who?

  Nobody told me that if I bought a Mac Mini I could only watch movies purchased from iTunes on an Apple Mac monitor. Anyone else encounter this sneaky thing?

  If you see some kind of error message, then it would be much more informative to post rather than immediately jumping to jump of paranoid conspiracy theory.  If you see no messages about it here then probably it is something very specific to your installation because I do not know there are tens of thousands of people out there using non-Apple monitors.

• I need help to use my gateway as a monitor for mini mac 2011 2012

  OT: installation.

  I need help to use my gateway as a monitor for mini mac 2011 2012

  You should ask the community of Apple Mac

  Community: Mini Mac | Apple support communities

  Apple Mini DisplayPort to VGA adapter. Use: Use the adapter Mini DisplayPort to VGA to connect your Mac to a standard analog monitor, projector, or LCD that uses a VGA Connector or a cable. Compatible with: MacBook Pro (retina, 13-inch, late 2012) and later versions. November 11, 2015
  On Apple and cables - video cards Support Apple

• Mini and monitors = mystery

  Bought the new Mini in March (3.0 ghz, 16 RAM). Connected to two Dell UltraSharp 24 "monitors connected through CDM (Thunderbolt) > HDMI on the monitors.

  Immediate problem: random scrambled color on one of the monitors when Mini woke up from his sleep.

  Tried changing the cables, ports, view profiles in pane Pref - color problem garbled continued to display.

  After extended sessions of tech support, Apple allowed the return of Mini and sent me a new duplicate. Exactly the same problem.

  The second Mini continued switch ports, using new cables, trying different display profiles. Problem persists - any monitor is connected (CDM > HDMI) to the right AMD at the back of the MINI, which monitor screens color scrambled when waking from sleep (randomly, not all the time - time half-plus).

  Also, if I connect two monitors as CDM > DVI instead of CDM > HDMI, it eliminates the problem completely - perfect color on both monitors then to wake up from its sleep. So the problem is with one of the CDM ports connected to HDMI on the monitor.

  SO - I can shoot with CDM > DVI connections. I'm just at a loss to know why the AMD > HDMI connection on ONE of the two ports CDM on the MINI poster color blurred when waking from sleep more than half the time.

  Wonder if anyone has any ideas...

  CDM > on the MINI HDMI connections?

  Video problems on the current edition of the MINI?

  Plug HDMI on monitors Dell being inconsistent with the specifications on the MINI HDMI?

  Another thing I'm not checking or forget?

  Kudos to Apple for two very long with the first MINI tech support sessions and for sending me a replacement, even if none of this solves the problem.

  Thanks for your suggestions!

  Stick with the Mini DisplayPort to DVI, DVI connections is much more stable than HDMI.

  FWIW, I never had no problem with two monitors connected DVI 24 "or smaller on any of my Mac Mini models.

• The display on my 2008 Macbook Pro went dark. Can I connect to a Mac monitor no?

  View on 2008 MacBook Pro has been dark. I can connect the computer to a Mac monitor no?

  Sure. If the computer problem, it is with the LCD screen or the backlight, you should be able to use it plugged in the external display. If the problem is with the graphics card will not help the external display. Your computer requires a dongle to connect to the screen and you must get the correct key for display - VGA or DVI. Determine what type of port the display and buy the appropriate mini-Display dongle

• Forsoker installlera Adobe acrobat DC pa min Mac Book Pro men det uppstar en conflict. Dator sager "jag Maste stanga Safari" - saken ar den att inte ar startat... Safari vad gora?

  Forsoker installlera Adobe acrobat DC pa min Mac Book Pro men det uppstar en conflict. Dator sager "jag Maste stanga Safari" - saken ar den att inte ar startat... Safari vad gora?

  Guest of installation of close SafariNotificati

  https://helpx.Adobe.com/Acrobat/KB/install-prompt-close-safarinotificati.html

  Programs interfere with the Installation of fence

  Mac - Activity Monitor: http://osxdaily.com/2010/08/15/mac-task-manager/

• Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  If you have another Thunderbolt cable, plug it into the unused port on the

  Thunderbolt Display and then in the Mini and see if the same thing happens.

  What you can see is a precursor of the poster, built out of the cable.

  At least, it could eliminate a costly repair problem.  Although the cable itself is not

  expensive, opening to the top of the screen of TB to replace could be.

  Well that not connected on a Mini, I began to see in similar behavior my

  iMac, so that there was finally a break in the complete cable.

• Mini Mac - exchange of hard disks

  I have two mini Mac - the two 2012.

  Mac mini #1 is i7 2.6 GHz Quad Core - my first desktop computer

  Mac mini #2 is i3 2.3 GHz Dual Core - used as HTPC / Media Server

  #1 has (2) 1 TB disks, which I use a lot less than half (I also have external drives)

  #2 a (1) 512 MB internal drive, which is almost complete

  I plan to (1) move the 1 TB drives from #1 to #2 and move all data (mainly from the iTunes music ALAC and some iMovie video), that would solve the question of space. While they are open I consider also adding an SSD as the diskette of starting to #1, this would improve the startup time, run certain programs a little faster and a 256 MB or 512 MB disk would be inexpensive, that I would win a little more than space for data too. (to be honest, the Mac mini is jealous of the SSD in my MacBook)

  I've increased the RAM to #2, replace a switch of volume on a 3 g iPhone and replaced a screen on an iPad 2, so I'm not afraid of detail work - but only the RAM was easy. I also watched the videos on the replacement of a HD for this model on iFixIt. What is not clear is how much more difficult it is to make the first record as the second. If I move just a reader I wouldn't have to dig in the 1st Bay.

  So, my questions:

  (1) how can I say on the report system which drive is in the Bay, by whom I have which is on top, which is at the bottom? Or can I assume that the startup disk is always on top? (harder to do)

  (2) is the player in the upper Bay of much more difficult to replace?

  (3) I would also examine suggestions for a reliable SSD, but this isn't the substance of my question.

  Thanks for your help...

  Here's a video OWC on how to add a second drive to a Mac mini (same steps for 2011) 2012. I bought their data Doubler kit (and the extra ribbon cable) so that I would have the tools to get the job done right. Seen their detailed video while performing the surgery. I bought a 128 GB OCZ Vertex SSD (now a division of Toshiba and new product name VT180 series) for main and kept startup disk the Apple 512 GB of disk in place. The OCZ Vertex is fast and reliable for fall 2011.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Mini Mac waking from sleep. A SOLUTION.

  I had the same problem that everyone has:

  Mini Mac won't sleep, requiring a shutdown and restart.

  I found the cause of my problem. This solution has been tested.

  Your system may differ from mine, but my solution can give you some ideas to try.

  My system: Mac mini (mid-2011), running Lion.

  On March 19, the eve of the day when the problem started, I sent a print job on my printer.

  The next morning (20 March) the problem started and happened again on 21 March.

  Exact symptoms seen: screen switch mode; However energy saving, the computer never goes sleep (front panel LED rest of suite, throughout the night, did not have his usual pattern of sleep slow breathing).

  In particular, the "system.log" file shows the usual "alarm maintenance" wake up every 2 hours. The newspapers just go quiet.

  Impression triggered the problem:

  My printer is a recent model Brother laser printer.

  Since March 19, I had been using Control-P to print documents;

  However, at no time I turn on the printer; my intention was to accumulate my impressions for several days,

  After that, I planned to turn on the printer and do my print and send all at once, for efficiency.

  It helped me: this solved my problem:

  March 21, I was wondering if something in the print queue prevented from sleeping.

  Experimentally, I opened app leader brother printing and deleted the print job in the queue,

  and BINGO, I instantly found the opportunity to sleep and wake my Mac mini.

  Other tests have shown that the problem is reproducible at will. :^)

  On 22 March, I tested the mini to ensure he sleeps and wakes.

  Then I sent a print job to the print queue, leaving the printer off and tried to sleep the computer.

  The problem comes back immediately: the display fell asleep but the computer does not.

  Then I connected ssh via LAN and issued:

  % lpq

  for the number of working the print job, then

  lprm % [jobnumber]

  to clear the print queue of the printer.

  This delete the print job, and the computer went to sleep immediately.

  Moral: They say devices can prevent sleep.

  Well, it shows that a device can prevent sleep without even be turned on!

  Tip: If you * must * stop your mini, first try to connect to the local network via ssh and issue the

  sudo shutdown - hour now

  for a stop more ordered by limiting the risk of data loss.

  PS. usually I can solve any problem of sleep if I ssh in from a different computer and question

  killall % ScreenSaverEngine

  but this does not work in this case.

  This object could be turned into a 'trick' - If you want to.

  Given that it is useful and not directed towards another user in a response.

  Thanks for sharing!

• Mini Mac and sonar X 3

  Hello world

  To upgrade < adapted Mac mini budget:

  Mini Mac 2.8 GHz < ssd 8 GB < someone at - it tried with Sonar X 3?

  What is a "Sonar X 3?

• Mini Mac 10.5.8 has been improved to 10.7, we have a lot of products older Apple if I buy the most recent delivered to nine Mini can I still use my iBook etc.

  My Mini Mac 10.5.8 has been upgraded to 10.7. We have a lot of Apple products. If I always buy a refurbished Mac Mini can I have limited access to my other computers laptops, iPhone, etc. I'll gather all the detailed information of the products Apple and posting here.

  Everything should be good. Just use the same identifier Apple you used on older devices.

  Note the following points:

  Upgrading to 10.7 and don't forget Rosetta!

  You can synchronize only with a computer. To move computers

  Synchronization to a 'New' computer or replacing a hard drive "crashed": Apple Support communities

  If all the media synchronized music and apps are already in the iTunes library of the new just backup on iTunes computer and restore from this backup.

  iOS: backup and restore your device iOS with iCloud or iTunes

• Peuvent mini-Macs communicate-to-peer using bluetooth?

  If so, can I use X 11 to do?  X 11 is, indeed, a cross-windows application?  Should I use for transfer error correction?

  Whickwithy wrote:

  Mini Mac connect-to-peer using bluetooth does

  I do not know.  There is an entry in the preferences system-> network of bluetooth devices, but which may be limited to attach to a cell phone to access the internet.  I'm not sure.  You can experiment with the configuration of the network at least.

  OS X Yosemite: connect to the Internet with a mobile phone Bluetooth active>

  If so, can I use X 11 to do?  X 11 is, indeed, a cross-windows application?  Should I use for transfer error correction?

  If you get a network connection, if you can get X 11 to talk, she must be the connection TCP/IP and TCP protocol provides a reliable transfer.

  Just checking, but you know that OS X is NOT X 11 as its windowing technology.  You can use XQuartz for X 11 using a Unix or Linux system.  But you won't be able to say a typical application for Mac that his DISPLAY server is more about it another system.  The best you can do with OS X is use screen sharing to display applications running on the remote system.

  NOTE: Bluetooth is not a fast transport and X 11 is a very chatty Protocol.  If you get X 11 windows displayed through the Bluetooth, it's perhaps not as sensitive as you use a WiFi or Ethernet connection.  Not having done something like that, I'm just speculating.

  If you can get a connection, then chances are you can do ANY kind of network operation in all of what the Mac is normally supported.

• Speed of sata for 2012 mini mac link only 3A negotiated Gigabit?

  I just bought a 2012 mini mac, processor i5 2.5 GHz opportunity. It seems that everything is delivered as originally, the hard drive is HTS545050A7E362 (5400 RPM). I think that it initially comes with Mountain Lion, but now the OS is 10.9.5 Mavericks. I plan to hand 10.8 Cougar on it soon.

  It seems to take so long to start as my mac mini 2010. I made a backup and he seemed to be very slow. It was a few days ago. Today, using 'about this Mac' and looking at the Express SATA/SATA, it shows Intel Series 7 Chipset, connection speed: 6 Gigabit, negotiated speed: 3 Gigabit.

  Should it? If that's all that the current drive can do, which will motivate me to get an SSD. I intend to change the OS anyway, I'll do this first and see if a difference. I tried searching for this info online and cannot find published specifications, and there are some problems like this, but with models much earlier with different circuits firmware. Maybe I'll try start several times with the command-V, even if I think I'm going to need a camera high speed to capture the output. Is it possible to display the default info not requiring only the command-V?

  6.0 is supported. The drive may be 3.0.