Mini-usb port doesn' work

Similar Questions

• 8.1 Windows 64 - bit 3 USB ports not working not

  I have a model computer T430s 2352CTO, running Windows 8.1, 64-bit version. Before upgrading Windows 8.0 all drivers have been updated. The USB ports 3 worked properly, in particular an external hard drive of 1 GB running. After the 8.1 update, 3 USB ports work always, but only for about 30 seconds, then the hard drive stops. The power led remains on the hard drive, but it no longer displays in windows Explorer.

  In Device Manager, I'm gone to Bus USB-> USB controllers Root Hub-> properties-> (under general it says "this device does not work correctly)-> Power Management-> unchecked the box"allow the computer to turn off this device to save energy. Unfortunately, it doesn't seem to stop the problem. Any ideas?

  Please try this:

  http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-Windows-8-1-my-USB-DRIV...

  Thank you!

  Houman

• USB ports not working not on Windows but works on Ubuntu (fixed)

  Hello

  I have dual boot Windows 8 and 13.04 Ubuntu on my laptop. For some reason, my USB ports doesn't work on Windows, but it still works on Ubuntu.

  I ran a convenience store in the Panel and has detected that there is a problem with my USB (Code 43) ports, but he has not tried to fix or something. Given that my USB ports work fine on Ubuntu, I'm guessing it's a Windows driver issue? I was wondering what I should try to fix this (maybe uninstall drivers and reinstall? how?)
  Would be very happy for any help I could get.
  See you soon!

  Hi Darius,.

  This problem may occur because of the hardware device fails or if the device driver fails.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Code 43: Windows has stopped this device because it has reported problems
  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = ws.10) .aspx

  Method 2:
  If the problem persists, you can try to download and install the latest USB drivers on the manufacturer's Web site.

  http://support.Toshiba.com/drivers

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• USB ports not working do not. Pavilion dm4-3090se

  USB ports not working do not.

  Thanks for your reply.

  no ports were working, so I went into Device Manager, uninstalled them, re-started... and... iola!

  they were back!

  Thank you again for your answer...

  Louise

• Equium A60 - 692 USB Ports not working not

  Hi all - new to the forum and what a good place to find info on Toshiba laptops. Anyway - after a recent storm, I lost connection to my ISP broadband - contacted the helpline who advised me to Exchange my ADSL modem to an Ethernet - made and corrected the connection problem - however - only after having it done I realize has none of my devices (printer, camera, Web Cam etc.) worked via the USB ports. I've uninstalled and reinstalled the system and drivers for devices without result. The device displays 500ma of power manager is available for each of the 3 ports but watch 0ma used. The Device Manager also shows that the USB ports are working properly. Can someone help or advise if these ports on a separate card or they are part of the motherboard. If Yes, where can I get a. Congratulations to all - Andy

  A lighting strike is not good news, if she gets hit by a kind something can go wrong. My guess is that your laptop USB ports has taken suddenly by a massive power surge that probably damaged the chips inside. It could be a Windows problem, or not the only thing I could suggest is to use a bootable Linux such as Knoppix CD and run a command called usbview with some USB devices.
  If the USB has been confirmed dead then your only option is to use an adapter CardBus USB 2.0 providing your CardBus slot is not damaged too.

  Richard S.

• Satellite P850 - right USB ports stopped working

  I have a new P850 Satellite, after a short period, that the two right usb ports stopped working, I had only a wireless mouse connected to them at the time. Is there a reset for these ports, I tried to uninstall and reinstall, no change.

  Anyone has any ideas.

  > I tried to uninstall and reinstall, no change.
  What have you tried to uninstall or reinstall?

• Pavilion p7 - 1380t: USB ports not working not

  The two front USB ports do work not today. Worked fine yesterday. Everything I plug is not coming. Using ports in the back, they work very well.

  Someone at - it ideas about the problem and a fix?

  Thank you

  Hello @xploded16,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how the front USB ports on your desktop computer do not work, and I'd be happy to help you in this case!

  To enable your system to recognize the USB ports before once again, I recommend that you follow the steps described in this document on Troubleshooting connections USB (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• HP Pavilion G6-2146sl: HP Pavilion G6-2146sl left USB ports not working not

  Hi, I have a HP Pavilion G6-2146sl with Windows 7 Ultimate x 64... my problem is that the two left USB ports stopped working properly: for example, when I insert a USB flash drive lights up but it is not recognized by Windows. Is the only port that works on the right side of the laptop. I tried to do a search of driver, but Windows cannot find driver. Here is a screen of my Windows device management:

  

  Thank you in advance for your help and sorry for my bad English, I'm Italian.

  Hello

  AMD AHCI, USB 3.0 chipset and RAID drivers

• HP a6554f: Front USB Ports not working for a6554f

  Hi, I cleaned the dust from my computer yesterday for the first time because the computer kept crashing. I removed the motherboard, so I unplugged everything that was clinging to her and I also removed the hard drive then plugged everything once I had finished, (do not know if I just plugged in as it was, even if I took a video of it, but the wasen can't good quality so I had to guess a little). I also added thermal compound to the cpu.

  Anyway, everyhting seems to work except the 2 usb ports front of the case. It was working fine until I opened the case (this is why I do not open the computers, but the dust was just too). The audio ports and microphone located in the front work correctly. And the rear USB ports are working properly.

  What I've done so far is running pilot Booster and also I went to Device Manager > USB Bus controllers, then I turned off everything on the list, then allowed them again. And nothing has worked.

  I don't know much about computers so I don't want to go to the hassle of opening the case cause once again I was scared lol but could I maybe hooked up a cable in the port of fake?

  Also, is there a diagram to show where each cable goes to the a6554f model?

  As you pointed out the audio before and MIC ports are working, then it might be just the plug for the ports before USB is not properly or is in the wrong place.  Here is a page that relates to the motherboard. In the lower right corner of the image or the page layout scheme, there are two blocks header before normally taken into USB ports.  Says F_USB1 and F_USB2.  Either we must work to the front ports.  Check to make sure that the wiring box beam (which has the wires going to the front USB ports) is connected on one of them.

• All usb ports not working do not all of a sudden on windows xp

  I have 5 usb ports, which worked very well and all of a sudden none of them work, I checked the status of them in Device Manager and all say working properly?

  Hi Backgammon167,

  The question you have posted is related to Windows XP and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General&lang=en&CR=us

  I hope this information is useful.

  Concerning
  Rehman - support Micrsosoft

• USB ports not working not online when using wireless

  Hi, I use windows vista Home premium on a Fujitsu siemens Amilo laptop.

  Until yesterday, I always connected to the internet via a direct connection with my router. Now, however, I have have a direct link and can only connect to the internet through a Wi - Fi

  As soon as I logged online, all my usb ports stop working... I mainly use my mouse and my web cam... the cam sex is essential for my communication with my wife living abroad... Try as I might, I can't get the laptop to recognize any usb... as soon as I'm online... That is to say the internet disconnct, according to my USB again.

  I would be eternally grateful if you could help with this frustrating situation

  Kind regards

  Graham

  Hi CindyThrelkel,

  Try the following steps to resolve the problem:

  Method 1: Run the troubleshooter of material and check what is happening.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: You can check after uninstalling and reinstalling the USB drivers , if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following help link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  You can also check:

  In Windows network connection issues

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  Hope this information helps.

• USB ports stop working after windows 7 updates (April 12, 2011)

  After application of the 12 updates successfully (KB890830, KB2508272, KB2506223, KB250212, KB2508429, KB2507618, KB2509553, KB2503658, KB2506014, KB2491683, KB2511455 and KB2446710), my USB ports stopped working after restart. I get this description of Device Manager: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I restored the functionality of USB ports by doing a system restore before installing updates.

  What should I do? Ignore ALL updates future windows 7, which leaves the system vulnerable? Help is appreciated thanks.

  I solved this.

  Device-USB controllers-online standard uninstall online Manager pci improved to (do it twice) usb host controller, and then the scanner hardware change and let the win7 to reinstall the drivers.
  Updates were corrupted somehow the drivers, you need to fix manually.

• USB ports stopped working unexpectedly

  Hi, I am currently on "Toshiba Satellite C655"run"Windows 7 Home Premium". It's a laptop of 2009 model (2 GB). Last night (24/02/14) my USB Ports stopped working, they have been and continue to read anything every time I have to plug my devices. I usually only connect a cooling block and a USB mouse to the computer. They worked perfectly until I disconnected the. When I reconnect them, they work momentarily, and then I hear the beep sounds when you eject a device. I tried to connect several flashdrives, a printer, and one I tried the following hotfixes:

  Note: The order of numbering has nothing to do with the order, I tried to apply each patch unless specified elsewhere. This computer had Windows 7 Home Premium REINSTALLED at some point. Just for your information. This message was made when there are others with the same problem is due to the fact that no solution not specified by Microsoft Technical Support or the Microsoft community were effective.

  1) System Restore to the last known point, where they worked (and still). (Point restoration @ 15/02/24)

  2) Windows Update

  3) turn off the computer, disconnect the battery and the power supply and holding 'On' button for 10seconds.

  (Note: whenever I turn on the computer now they work only for a moment, usually from 60 to 180 seconds.)

  (4) Start > research ' Device Manager '> "De Bus USB controllers" Expand and turn off and restart the computer. They are re - activate automatically but my problem persists.

  (5) download and run "Microsoft FixIt.WinUSB... ", on the 1st, I had a problem with devices not updated. But I actually watch updates by using Windows Update and ""searching for hardware changes "" on USB Bus controllers "." I then did a 'System Restore' and now Microsoft FixIt found no problem but the USB Ports don't always work.

  (6) will ' services.msc"and change the Startup Type of Manual to Automatic for Windows install and restart Windows."

  7) regedit

  8) sfc/scannow

  I am really lost with this problem now. My laptop works and worked perfectly fine until this problem occurred. I have fixed minor problems with computers before, but this is a bad joke for me now. If someone could please help me with this problem I would appreciate it a lot. Thank you very much.

  Thank you for your help, but I discovered something funny on my computer. My cooling package (product name: Laptop Cooling Pad NSB;) HYCF-6181-2 model number) is to disable my USB ports when I plug. If I leave it unplugged and restart my computer, my USB mouse is still working on a port. Also tried using my USB and other devices. The problem is my block of cooling that strangely disables my USB ports, whenever I plug. Thank you very much for your quick response, fortunately the answer might help me in the future. For now, I have solved my problem.

• All USB ports stopped working Windows 7

  Windows 7 Pro. All USB ports stopped working.  When I plug a usb card, windows makes the sound as it connects and the card gets power (light).  I see the map appear in disk drives in Device Manager.  The player does not display in windows Explorer or disk management.  In Device Manager, it has an exclamation point and says that the device cannot start.

  Strangely, I have a USB keyboard and mouse and they work very well.

  It's just the USB drives and chips and SD cards that are not displayed.

  I have:

  Reinstalled the drivers USB MB

  Flashed the BIOS with the latest version

  Tried to install the older USB drivers

  Tried to let windows find the driver.

  Still does not

  None of this has helped.  I ended up formatting the HD and reinstall windows from dvd.

  This revealed that my USB multicard reader was bad.  When I unplugged the problem disappeared.

• used ACER Aspire 5100 which has windows vista Home premium with service pack 2. It has technology MOBILE AMD Turion 64 x 2 usb ports doesn't work don't, webcam and CD/DVD drive now does not.

  I bought the laptop to a pawn shop and waiting for a few minor problems, but not this one.

  It began with the webcam doesn't work does not correctly, but works. After Device Manager running that it has detected a Xerox Pro scanner, not built in webcam which i see in front of me. I tried everything with no success, but this isn't the only problem there is... more

  After I realized that the cam is not working, all 3 USB ports leaving recognize anything and all the devices connected by a mouse flexible wireless microphone on a memory stick 4 GB, could not be recognized. All were then tested in two other PC with these things being recognized and installed on the PC.

  I have updated after him saying driver not installed, only to be told driver is already up-to-date, but will still not be recognized.

  Now the CD/DVD does not work and is not even detected in scan. says the drivers are not present or that is disconnected. I did nothing else than to go in circles are doing the same thing over and over again.

  Is there a worm or bug or something wrong freeking I know and how do I solve this problem?

  I like most of the features of vista, but if it's the doo doo a bit I have to put up with... I want XP less back pain...

  Once again can not locate or install programs or drivers to operate the integrated webcam

  All USB ports defective 3 and CD/DVD is no longer functional or even detected in laptop... HELP ME PLEASE

  Hi Laurent,.

  1. did uninstall you the USB ports on the Device Manager and reinstalled as mentioned in the previous post?

  Please see the following thread link:

  my USB say this device not yet recognized the worsks device in the other laptop why?

  Uninstall all USB device manager entries and check.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  2. have you tried to uninstall the webcam?

  If this is not the case, try to uninstall the webcam in Device Manager and install the latest version of the drivers from the following Acer site.

  Acer Driver Downloads

  On the problem of DVD player, you can try the steps in the following article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope this information is useful.