Minimize default CRM details

Similar Questions

• maximize/minimize defaults to reduce at least want it or by default in maximixe.

  The upper right corner has 3 boxes, in the middle there maximix / minimize. The reduction has become the default and I want the maximixe to be the default. Help, please!

  Hello

  1 are you referring to any specific application?

  2. the problem occurs with all windows or any particular window?

  I suggest you to follow the steps below and check if it helps:

  Method 1: No matter what shortcut you use to launch the window, right-click and select Properties. Under the 'Run' drop-down list, choose "expanded".

  Method 2: Also try to grab the corners of the window and drag it to the format full screen.  Do not use Maximize. First close all other windows via the taskbar and this last one. Windows will remember the size of the last closed window the next time that you open the program.

  Hope this information is useful.

• Default master-detail

  Hi all
  I need help with a master form / retail, I created in Oracle APEX. The secondary table has 3 columns that coexist in Master and detail, the values are also the same on the two tables. In the ADD LINE (@ level of detail), I tried the default values in the secondary table as they exist in the database table. But I have had no luck with my multiple attempts. My goal is to avoid the re-entry of the redundant values. Experts can you please tell me how to get the default values of work? I really appreciate your help
  
  Thank you
  Susan

  retail value should be like this

  P #_mastercolumnname

  where # = page number

  I hope it will work

• IDCS6 (MACOSX 10.9.5) change default cropping on guides

  In the past, it was possible to export or print from InDesign with a set of benchmarks of crop that wasn't the default. Details are available from http://indesignsecrets.com/creating-custom-printer-marks-in-indesign.php

  However, it has been long since this post was written and when re - visit the situation to see if it would help other posters, trying to make their cues from black crop only, I was not able to make the marks on the CS6 on a mac.

  If this works correctly, this checkbox highlighted varies from "default" to something else.

  

  As it is for me, it won't change beyond 'Default' to the point where it is literally there as a decoration.

  All the world tried to change their cropmarks for CS6 and if yes, how did you do?

  PDF extract on the writing of the code, is here:

  http://InDesignSecrets.com/downloads/MRK.PDF

  I ran a simple test and it works for me. The .mrk file goes in/Library/Application Support / Adobe / PrintSpt:

  

  The bad news is looking at the API, there is no command to change the color of cultures or bleeding. Looks like you can change the dimensions and position but not colour. Perhaps Olav Kvern would have some info on in scripts.

• Loop for an indeterminate period of windows update.

  Using Windows XP Pro and Office 2003 latest service packs installed. A security update for Microsoft Office 2007 (KB951550) and update of security for Microsoft Office System 2007 (KB951944) show several times as a successful update, but the windows update has done 23 times with success (part of the report follows). Office 2007 Security Update for Microsoft Office 2007 (KB951550) Tuesday, March 6, 2012 updated Automatic Access2007 Security Update for 2007 Microsoft Office System (KB951944) Tuesday 6 March 2012 automatic updates Office 2007 Security Update for Microsoft Office 2007 (KB951550) Tuesday 6 March 2012 update of Microsoft Office 2007 Security Update for 2007 Microsoft Office System (KB951944) Tuesday, March 6, 2012 Microsoft Update Office 2007 Security Update for Microsoft Office 2007 (KB951550) Tuesday , 6 March 2012 automatic updates Office 2007 update for Microsoft Office 2007 (KB951944) Tuesday, March 6, 2012 automatic updates Office 2007 security update system for automatic updates for Microsoft Office 2007 (KB951550) Monday 5 March 2012 Office 2007 Security Update for 2007 Microsoft Office System (KB951944) Monday, March 5, 2012 automatic updates Office 2007 Security Update for Microsoft Office 2007 (KB951550) Monday 5 March 2012 automatic updates Office 2007 security for Microsoft Office System 2007 (KB951944) Monday, 5 March 2012 updated Automatic and so on 23 times! The difficulty Microsoft it Optin at the determination of the sentence made a few corrections, but has not solved this problem - report: Windows Update components detected problems must be repaired fixed components repair Windows Update successful issues by default checked Windows Update data locations have changed the verified questions found Windows Update components must be repaired fixed one or several components of Windows Update are configured incorrectly repair Windows Update components succeeds to repair Windows Update frequently solves common errors in Windows Update Windows Update checked by default questions data locations have changed checked the location where Windows Update stores data has changed and needs to be repaired repair default Windows Update sites not run Windows Update for Windows change default settings details Collection detection by the name of the computer information: OPTIPLEX Windows Version : 5.1 architecture: x 86 heure: 06 / 03 / 2012 22:20:16 details Windows editor updated to fix problems that prevent you to Windows Update. Package version: 4.0.2.20110411 Editor: Microsoft Corporation Page 1 of 1 file://

  Hello

  See this link:

  http://support.Microsoft.com/kb/906602

• Connected to Wifi control

  Is there a way to check when the device is connected via Wifi?

  I have registered for netstatus_request_events but do not seem to be receving any event when I do the check:

  If (bps_event_get_domain (event) is netstatus_get_domain())

  I can check the availability of the network using:

  Boolean result;

  netstatus_get_availability(&result);

  But it does not give me the type.

  Is there a simpler way to check?

  Thank you.

  Yes, you are in fact correct. Providing NULL to netstatus_get_interface_details() as the parameter of the interface gets indeed the details of the default interface. In this spirit, I simplified my code. In addition, given that I wanted to onWiFi() to return true in the Simulator too I modified the condition a bit to include a test for NETSTATUS_INTERFACE_TYPE_WIRED. As you'll see below, I like to use that when I have more than one value to match rather than (condition) & (condition) because I find it much more readable, especially when comparing the names of long #define like this:

  Here is the new simplified version:

  bool onWiFi() {
      bool retVal = false;
      netstatus_interface_details_t* details = NULL;
      if ( BPS_SUCCESS == netstatus_get_interface_details( NULL, &details ) ) {
          switch ( netstatus_interface_get_type( details ) ) {
              case NETSTATUS_INTERFACE_TYPE_WIFI:
              case NETSTATUS_INTERFACE_TYPE_WIRED:
                  retVal = true;
                  break;
              default:
                  break;
          }
          netstatus_free_interface_details( &details );
      }
  
      return retVal;
  }
  

  maarko wrote:

  glad I could help

  I found just as you can jump to get the default interface. netstatus_get_interface_details (null, Details) will return the default one - Details needed here

  http://developer.BlackBerry.com/native/reference/core/com.QNX.doc.bps.lib_ref/com.QNX.doc.bps.lib_re...

  Arguments:
  interface

  If the NULL value, reports the details of the default interface, when it exists.

• "customize this folder" has stopped working

  Whenever I do a right click on a folder and customize for photos, it changes is no longer the folder view. If I change the display of "Détails" to "Large icons", using the menu bar, the view changes but it default return Details every time that I go back to the folder after leaving it.

  These functions used to work and changes are permanent until a few weeks back.

  I have Windows 7 on a Dell Inspiron N5110

  Update: After experimenting a bit, I find that I can always change records created before August 10, 2012. All records created after this date are refusing to accept changes "Customize this folder" or by changing the view "large icons".

  I tried a system restore, but my first restore point is August 30, 2012, so this is probably not the problem.

  It drives me crazy because I just returned from vacation with 450 photos to change and I can see them only in Details view! Any help to rectify the problem would be much appreciated.

  Hello

  1. don't you make changes after August 10?

  2. What is the location of the files, with which you are confronted with the question?

  Method 1: Run the fixit

  See the site:

  Changes in the size, the view, the icon or the position of a file are lost

  http://support.Microsoft.com/kb/813711

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 2:

  Change the location of the folder where the files in question are stored and check if the problem persists.

  Method 3: Virus Scan

  Analyze the computer to remove all possible malicious content.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See the following site:

  Microsoft safety scanner

  http://www.microsoft.com/security/scanner/en-us/default.aspx.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

• How to display a list of campaigns that the customer has subscribed to

  I have a site with three campaigns of emailing and a form of 'subscribe' allowing people to go into the details, create a name of user and password and select what emailings one (or more), they wish to subscribe to.

  The email they receive shows that they have joined in campaigns.

  I want to be able to let connect you to the site and see who they are subscribed to campaigns and enable them to unsubscribe from their share it too.

  I know they can select the "unsubscribe" link in one of the e-mails they receive, but how can I do this in one place on one page after that they connect?

  I used the tag {module_subscriptions} but showing only the secure area that they have subscribed to, not the list of campaigns, that they have also signed on.

  So I know I have the logging in process work properly and showing me CRM details correctly and subscriptions and favourites. But how can I show the campaigns?

  Hi David

  You can do this natively in British Colombia. The function does not exist. There is a version of the opt-out tag that comes their unsubscription from the LIST rather than the database that you could get a babystep to what you need.

  Otherwise, I would have to build you a CUSTOM Installer where connected clients LIST SUBSCRIPTIONS are controlled via the API.

  And if the customer wants to change which indicates that they are that we also do via the API

  It's the only way. And it's certainly something that would take more than a day (rather than hours)

  If you need more advice on this feature just send me an email and we can run through together.

  [email protected]

• Open tools ODI (ODI Purge Log)

  Hello

  Can you guide where we get "OdiPurgeLog".

  We use the ODI 11 g on windows 7. We automate the removal of logs run ODI as it occupies a lot of SPAC.

  I read in some messages that we need to use ODIPurgeLOG.

  Can a guide if you please how to get these open tools and their use in ODI.

  Thanks and greetings,

  Anis

  1. modify the logging level to minimize the log details

  2. for charge Plans set limit the use of 'Keeping the journal History (days)' option

  3. in the package, you will find in the list of tools under the OdiPurgeLog utilities. Adjust settings as needed.

• Customizing fields using the BC & DW form builder

  I've created a form, "pre-order" as follows:

  1. CRM > extend CRM database, where I created the CRM data fields
  3. Web Forms > Add Web form > I added the form default CRM 'contacts' fields in the form BC Builder
  5. I then downloaded the form using DW and customize the fields; example: changed "at home" to "delivery address", removed the 'cell phone' field, changed "telephony" to "primary phone"...

  After pressing this form dates back to BC, I tested the form and the fields that I had custom data not in the CRM.

  Can someone help me with this problem?

  Thank you

  Catherine

  Thanks for your reply. In fact the form of CRM data works (data capture to CRM). His section of default contact form, where I customized fields that does not work. I now work with my 3rd BC tech on it as I write this response.

• OWB ANNEX

  Hi all
  
  I want to create a calendar module, but I do not know how to complete the fields user and responsibility, applications, applications.
  
  Thanks for your help.

  If you create the Calendar Module in the Project Explorer tree then the default location details that appears is for the location of the competitor Manager.

  If you want to use normal Planner DB, then use a current location or create first a location in the places under rentals Panel->-> Oracle databases.
  Then when create the module in the login Panel select the location you just created and details like application etc. will be erase.

• CHANGE RADIO GROUP VALUE

  Hi all
  
  I have a group of radio buttons
  RADIO_SUMM_DET
  
  and 2 radio buttons in the Group
  1 SUMMARY
  2 DETAIL
  
  I have 3 blocks
  1 CONTROL
  2 SUMMARY
  3 RETAIL
  
  I put the default RADIO_SUMM_DET 'Detail '.
  I have my radio on the block of control buttons
  
  When a new instance of the form opens
  by default, the selected option button is 'DETAIL '.
  
  When I change the option to 'SUMMARY' button and click on the search button (depending on the selected radio button, the button has the code to go to the respective block and query the records on the block) on the control block
  my control goes to the block summary and displays the corresponding items in this
  
  After having dealt with the cases I press search
  in this case the control goes back to the control block
  but the selected radio button is "DETAIL."
  I want the 'Summary' button to be selected when I return to the control block after goingfrom the summary block
  
  I hope you understand my problem
  
  Thank you
  
  Edited by: abcdxyz November 18, 2010 21:06

  Move the two lines in your code:

  .
  .
  .
  
     :control.RADIO_DET_SUMM :='SUMMARY';
      Clear_Block(No_Validate);
  
  ELSIF ...
  .
  .
  

  TO

      Clear_Block(No_Validate);
     :control.RADIO_DET_SUMM :='SUMMARY';
  
  ELSIF ..
  .
  .
  

  You navigate to the drive and then block by setting the radio to the contents and then clear the block that erases the block around, including the radio to the Group and it allows you to return without detail.

• Spry data set question

  I have a question to anyone who is familiar with the data sets spry - a link below for the example I use:

  http://www.thecreativeadvantage.com/clientzone/ca_portfolio_test/print.html

  The source of the dataset is:

  http://www.thecreativeadvantage.com/clientzone/ca_portfolio_test/print_source.html

  ----------------------------------------------------------------

  My question is:

  Is it possible to make the first button appear 'active' when the page opens. For example, each button corresponds to a State of 'Black' when it is not active, a reddish "stable" condition and a dark gray "active" State. All the buttons are black 'inactive' when the page opens, but the first description of the image and it is visible, then I would be the first button to appear 'active' (gray dark instead of black).

  The way it is now, if you click the first link after the page opens, the button changes to the 'active' State and/or colour, but its content does not change it looks like a mistake...

  Any help would be greatly appreciated - Please note: this is a demo page, I'm trying, please disregard the appearance and content - just trying to get the feature...

  Thank you very much!

  Jesse

  ----------------------------------------------------------------

  The associated style sheet is less necessary:

  @charset "UTF-8";

  / * SpryMasterDetail.css * /.

  / * Copyright (c) 2007. Adobe Systems Incorporated. All rights reserved. */

  / * This is the selector for the main container of master-detail structure.
  *
  * If you want to limit the width of the structure, master-detail, set a width on
  * the master/detail container. By default, our structure expands horizontally to fill
  * a space available.
  */
  . MasterDetail
  {
  font: 12px Verdana, Geneva, without serif.
  margin: 2px;
  }

  / * This is the selector for the master container element that houses all the MasterColumn
  * classes. By default the column Captain occupy about 35% of the width of the
  * whole structure.
  */
  . MasterDetail. MasterContainer
  {
  background-color: #cccccc;
  border: 1px solid gray;
  Width: 250px;

  float: left;
  overflow: hidden;
  }

  / * This is the selector for an element master column that contains data for
  * a main column.
  */
  . MasterDetail. MasterColumn
  {
  do-size: 11px;
  
  / * background-color: #000000; * /
  Background: url (.. / images/rollover.gif) no-repeat;
  text-indent: 20px;
  color: white;
  Width: 250px;
  height: 10px;
  padding: 5px;
  cursor: pointer;
  }

  / * This is the selector for an element highlighted in the main column.
  */
  . MasterDetail. MasterColumnHover
  {
  / * background-color: #1e1e1e; * /
  Background: url (.. / images/rollover.gif)-250px 0px;
  color: white;
  
  }

  
  / * This is the selector for an element selected in the main column.
  */
  . MasterDetail. MasterColumnSelected
  {
  / * background-color: #464646; * /
  Background: url (.. / images/rollover.gif)-500 px 0px;
  color: white;
  }

  / * This is the selector for the element of retail container containing all the DetailColumn
  * classes. By default, the Details column occupy about 60% of the width of the
  * whole structure.
  */
  . MasterDetail. DetailContainer
  {
  border: 1px solid gray;
  background-color: #ffffff;
  padding: 10px;
  Width: 500px;
  / * float: right; * /
  
  overflow: auto;
  }

  / * This is the selector for an element of detail column that contains data for
  * a detail column.
  */
  . MasterDetail. DetailColumn
  {
  margin-bottom: 1px;
  }

  I could be wrong, and right, you might get your answer here, but isn't the Spry forum here >?

• Deployment of the OMB via the TCL script

  I need to deploy all of the mappings in a module in a new target database. I want the configuration settings for
  (1) default operating mode = "DΘfinir base" and for
  (2) default audit level = 'NONE '.
  on all maps.
  
  It seems that the default repository for these parameters (and I can't find where these default values can be managed) are
  (1) default operating mode = "Line in function from set failover" and
  (2) level of auditing by default = "ERROR DETAILS" on all the mappings.
  While when I deploy via the script all mappings have these settings (which we do not want) as it appears that OMB orders use these repository/user settings. Card via interface OWB deployment allows you to change the settings of configuration as requires it, but it's the long answer.
  
  These configuration settings can be overridden in the TCL script via OMBDEPLOY or OMBALTER or any other command OMB parameter so all mappings are deployed/configured as
  (1) default operating mode = "DΘfinir base" and for
  (2) level of auditing by default = 'NONE' on all the mappings.
  
  Thank you
  Dave.

  Hi Dave

  Yes, you can set the code generation and the non-use of the properties of mode from a script...
  OMBALTER MAPPING "$map" DEFINED the VALUES of PROPERTIES (GENERATION_MODE, DEFAULT_OPERATING_MODE) ("SET_BASED", "SET_BASED")

  So that you can loop around all the cards and do these things, there are also a few experts on the Exchange utility, allowing you to block of updates quickly
  http://www.Oracle.com/technology/products/warehouse/htdocs/experts/multi_config.zip

  The model is available from scripts, for example to a PLSQL mapping batch you can query the properties as follows:
  OMBDESCRIBE CLASS_DEFINITION 'BATCH_MAPPING' GET PROPERTY_DEFINITIONS

  See you soon
  David

• I want to 'Details' as default, when I go to view the files in folders and directories.

  When I open a file, I wamt to my computer by default in list or details view. Currently files open in mode "mosaic". How can I 'List' or 'detail' as my default?

  Start in 'my documents' button, select view, then the value for details,

  change my photos, music, my computer, Control Panel, etc., once through,

  XP will use default youre. In addition, open the display properties.

  desktop computer, web, search & check 'lock desktop items "...