Minimum installation to analyze with DIADEM data stored on server Citadel 5

Similar Questions

• How to sign with the date of a server

  Hi guys,.

  Sorry for my English.

  I want to sign and more later if I see the properties of the date of a sign has a date of a server (to make a more "robust" sign).

  Thanks in advance.

  ZAMPAZAMPA.

  Well, if you trust the certificate root of authorized signatory of the things timestamp server should work fine.

  If you do it for the Government agency or a large company, so it is not possible to say to all recipients to approve the root explicitly, so for those use cases, it is better to go for a signing of the AATL http://helpx.adobe.com/acrobat/kb/approved-trust-list2.html to issue credentials for signing.

  and there is no need for end users to trust any certificate separately as these certificates are already in the trust of Adobe Reader list.

  HTH

  Santosh-

  http://about.me/nskumar

• Need help with a Citadel of DIAdem data store opening.

  Hello

  I was wondering if someone can help me to connect to a Citadel of DIAdem data store. I've read all the online help and cannot operate.

  On my PC, I use DIAdem v11.1 and v6.1 Lookout installed as a plugin. I am trying to connect to a data of Citadel store 5 on a server visible in the image below, specifically the default database on HPSERVER1. The installation of MAX on HPSERVER1 tells me that there are 2 versions of LabVIEW Run-Time installed, 8.2.1 and 9.0.1 (I don't know if this is relevant).

  

  When I select \\hpserver1\default_database, I then set the properties as follows:

  

  In the Advanced section, I'm the deadline set to 90 seconds. When I hit OK, then I get the following message, which then brings back me to the previous screen.

  

  Any help is very appreciated,

  David.

  Hi David,

  6.2 Lookout CLIENT is for people who do not have installed Lookout but still want to connect to a database of Citadel with DIAdem.  This works for databases Citadel created by Lookout as long as those created by LabVIEW DCS, is said by the way.

  In your case, you have already installed Lookout, you don't need this additional client software.  There is no improvement in functionality in this interface between 6.1 and 6.2, so you do not miss anything, and youre data import is already working.

  I don't know about lookout not appearing is not in the License Manager, etc.  I'm sorry.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Is it possible to send variable data stored to an LMS with SCORM data?

  I'm saving a text field user input into a variable. That works fine, but I'm looking for a way to get this information from captivate so I can review it later. I thought I could possibly send along my LMS with scorm data and then get it back there. For example, when the user presses the button submit, I could use javascript to send this string variable to one of the values of SCORM.

  Does anyone have experience with this?

  Thank you!

  Kevin

  Ask yourself if it is based either on the LMS on Captivate? I have been using TEB much and see the result in the black table, without having to do something special.

• The internal organisation of DIAdem data returned an error of initialization

  Hello.

  I have a laptop that is running Windows XP with installed 10.2 DIAdem.

  Main problem: tiara does not start. A few seconds after trying to run it I get a message "ERROR" box saying

  "The internal organization of DIAdem data returned an initialization error."

  Question that might be related: when I connect to the laptop there is an error message saying:

  "The DataFinder cannot start to an internal error. (122): failed to open the configuration file! C:\Documents and Settings\Settings\Application Data\...\my.datafinder< runmode:="" datafinder="" desktop="">

  The directory C:\Documents and Settings\\Local Settings does not exist on the laptop.

  My first thought was to reinstall just DIAdem. However, when I open Add/Remove Programs tiara is not in the list, so I can't uninstall it. When I just try to run the installer it says I need to uninstall the existing version first.

  No idea how I could get DIAdem working again?

  (btw this laptop is used for courses etc in our society, so I do not know how this problem occurred. Just that they have not been able to run the tiara on her for more than a year)

  Hi such,

  in your 1st post you mentioned that you couldn't find tiara in the Add/Remove Programs list.

  => Please look into this list to or . That's because NEITHER has its own entry in the Add/Remove Programs list. Here you should find DIAdem to uninstall.

  You should use MSIBlast if the 'normal' Uninstall failed for some reason. If you use MSIBlast, he could not guarantee that everything is uninstalled in the right order. MSIBlast is not updated on the dependencies between the msi files.

  You told us that the directory C:\Documents and Settings\\Local Settings exist on your laptop. If you have a proper installation of XP, it must be there. It is sometimes invisible because of your windows settings. If this is the case please change your windows settings so that you can see the folders system as well.

  If you found this file, please remove the following folder: "c:\Documents and Settings\Settings\Application Data\National Instruments\Shared\DataFinder". After that start please DIAdem - a new folder with sub folders 'config' and 'data' are created.

  If the error is-, then I have only one idea: If your laptop doesn't have hard enough to free up space to manage all temporary files that occurs during an installation - so maybe it's that this message occurs if you start the installed application. The installer itself is not warn about in each case, overloaded virtual machine, e. g. fragmented hard drive, etc.).

  Hope that some of my points would help you,

  Kind regards

  dietfons

• If I upgrade to win 7 I will lose data stored vista files?

  can anyone help? If I update to windows 7 I will lose data stored. That is, movies, music

  An upgrade maintains your files, a custom installation does not work. It's a good idea to back up your files before upgrading to Windows 7.

  Back up all your files and settings to avoid losing documents, photos and other information. Windows Easy Transfer is a free tool to copy files (not programs) from your PC and then transfer back after installation of Windows 7. If you don't want to use Windows Easy Transfer, you can copy your files to a Flash DRIVE or CD/DVD. Note: The easy transfer will not work when changing languages, or when moving from 64 bit to 32 bit (it will work ranging from 32-bit to 64-bit).

  http://Windows.Microsoft.com/Windows-easy-transfer

  How to upgrade:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  New installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

  Installation - 'upgrade' means what?
  Upgrade means that you can install Windows 7 simply by inserting the Windows 7 upgrade software in the DVD drive of your PC and follow the instructions on the screen. While you are not required to backup and reinstall your files, or reinstall your programs, it is a very good idea to back up your files and settings before you start any upgrade to the software. Get more information on the software updates and best practices .

  Installation - what does "Custom (Clean)" Mean?
  A custom (clean) installation clears the contents of the hard drive of your PC. Your files, settings, and programs will not be transferred to Windows 7. This means that to install Windows 7, you must:

  • Back up any files and settings you want to keep

  • Install Windows 7

  • Reinstall all your files

  • Reinstall all the programs you want to use.

  These four steps take time, skills, techniques and Windows Easy Transfer can help. However, if you are not comfortable with this process, please consider having the installation carried out by a local service provider.

• Creating virtual machine with existing data

  Hi all

  I have virtualized my almost all servers except the one and only one file server.  I'm under vsphere 4 with 2 ESXi hosts and a 2000 Eternus model 100 SAN and using Veeam 6 B & R

  Current configuration

  Physical server with 2 network cards

  1 NETWORK LAN card

  1 SAN NETWORK card using MS iSCSI initiator

  Windows 2003

  There are 2 volumes on my SAN which is connected via the MS iSCSI initiator containing the data for the file server.  Server file sharing (NTFS) files stored on the San, and they have a lot of NTFS permissions on files and folders (approximately 1.5 TB of data).

  Ideal configuration

  1 virtual server

  1 vNIC to LAN

  2 volumes of SAN share via the server

  Windows 2008 r2

  My question

  Can I just add volumes to vsphere, create a virtual machine, add the two volumes of the virtual machine as 2 hard drives, the actions of installation and do with it?  I wonder where the permissions are checked and if these measures can be made without wiping the volumes.  I don't have another 1.5 TB of free space on the SAN.  I have a Netgear NAS I use as a target for backup if necessary but I prefer not to have to move the data if it is not needed.

  I hope that I have covered all my bases to make this easy to understand situation and we hope to meet .

  Thank you

  Welcome to the community - Yes, you would be able to present the NTFS on the computer virtual hosted on your server using a RDM (Raw Device Mapping). Permissions on NTFS volumes are stored in the NTFS file system-

• Link new installation of thunderbird with the old profile.

  I created a new profile and stored on an external drive, there is a certain messages, I just had to reinstall win7 and do not know how to link a new installation of thunderbird with my old profile. Seems fair to get a host of issues that do nothing.

  Look at https://support.mozilla.org/en-US/kb/profiles-tb#w_how-to-find-your-profile and then go to the directory corresponding to your external drive to find your old * *.default file.
  Copy your old profile to the directory where your current profile is stored.
  See https://support.mozilla.org/en-US/kb/using-multiple-profiles to switch to your old GOLD "profiles.ini" edit profile to change the 'path' in the name of your old profile.
  Restart Thunderbird.

• FileVault will affect the data stored in the Cloud services?

  If I would turn on my Mac FileVault to encrypt my drive Fusion, this effect the data stored on both cloud services? In other words: with FileVault is active, all the data and documents I am storing in iCloud Drive, Dropbox or Google Drive since my Mac is encrypted also?

  And if this is the case, I'll be able to access these encrypted data from iPhone or iPad using the service applications usual cloud?

  (Ah yes and so that I am on this: person I know use FileVault.) Is there a drawback using FileVault (except that I have to remember my keyword safely, of course).

  Thank you for helping me make my decision.

  Full encryption of disk file Vault will have no effect on your cloud services. When you connect the drive is decrypted, it means any cloud service can access the same as data you - in its decrypted form. The downloads will not be encrypted (unless the service does its own encryption also).

  See the suppliers for more details. iCloud has this info...

  Security and privacy - Apple Support Overview iCloud

  You can encrypt files before uploading to any cloud service - but which is separate from the File Vault.

  File Vault has some potential drawbacks...

  If the drive does not recover the data are more difficult because data is encrypted - make good backups & test them!

  The computer is decrypting data "on the fly" which means it's more work than a system without encryption. The difference in performance is probably not noticeable with the new Macs, unless you start using reference tools.

  Forgotten / lost the recovery key & password will make the data inaccessible.

  The advantage is obvious, your files are not accessible to anyone, unless they have the password (or accessing the device when connected). Normally the files on a Mac can be read if someone know how to access the disk, that info is available anywhere on the internet

  for example OS X Lion mountain: transfer files between two computers using target disk mode

  It really depends on if you need protect your data "at rest" (when the power is turned off). File Vault will not protect you against any malware or other bad software etc. It's because the OS is actually the same when using - once that data is decrypted it is accessible, it's why File Vault like allows you to lock the screen with a screen saver password.

  See the File Vault information if you do not already done...

  Use FileVault to encrypt the boot on your Mac - Apple Support disk

• Updated Kaspersky and have been asked to deny/allow the following "Setup of Kaspersky Safari Extension wants to use your confidential data stored in 'List of extensions Safari' in your keychain"-is it safe?

  Update of Kaspersky, it asks me to deny/allow what follows - "Installer Kaspersky Safari Extension wants to use your confidential data stored in 'List of extensions Safari' in your keychain"-is it safe?

  # Kaspersky is one of the worst AV packages that you can install on your Mac. I suggest that uninstall you it. All he will do on your Mac is causing problems and offer no addition protection what so ever.

  Once you think you have managed to get rid of it, please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here. From the snapshot of your Mac, we say if you missed any bit and pieces during the uninstallation of Kaspersky.

• The graph refresh is very slow with large data sets

  When the graphics of large sets of data in tiara, the construction of the graph is slow (3 pts M takes 30 sec). Fair enough-, the problem is, however, some little change do you later to the curve, it will refresh all over again, and during this time you can't do anything else with DIAdem.

  Any way to relieve it?

  Problem seems to be solved - restart of DIAdem restored time to update to an acceptable level, or at least it seems that restarting is the only change.

  I tried later with the two parameters of charge mentioned by AndreasK and both just as powerful.

  I tried remote desktop access and it works all too well - also go remote DIAdem (to see if it's a graphics driver issue)

  I feel kind of silly not being able to identify what was wrong and I thank you for your help.

• Concatenate with DIAdem TDMS files, depending on the time

  This question is in French and English.

  Hello

  I'm trying to find a way to concatenate/merge several files TDMS analog measurements with DIAdem 2012, in order to have more than one file. I be provided with attachment 1.

  I am beginner in DIAdem and don't know not the language of the script code. En 986KO on this forum, I found the script 'Import data from several Files.VBS use', and changed lines 17 and 18 not 'csv' by replacing "tdms" (as it was stated on another topic on the forum). This script also appealed to "concatenate groups."

  The problem is that the TDMS files contain several groups (the slots on frame of measures Canada) each containing several different channels. This script concatenates so each group and the result makes more sense the script to modifier is certainly "CONCATENATE Groups", but in what way?

  Thank you

  Olivier

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I'm trying to find a way to concatenate/merge several files TDMS analog measurements with DIAdem 2012, in order to have at the end only one file. You can find these files with my mail 1.

  I am a beginner in tiara and do not know the language of the script code.

  By searching on this forum, I found the script 'Import data from several Files.VBS use' and changed lines 17 and 18, replacing 'csv' by "tdms" (as demonstrated in another topic on the forum). This script also uses "groups of concatenate.
  The problem is that the TDMS files contain several groups (pointing to the slots on the frame measurements), each containing several different channels. If this script concatenates each group and the result is meaningless. I think the script that needs to be changed is "CONCATENATE Groups", but how?

  Thank you

  Olivier

  Hi Oliver,.

  Try to run the script you downloaded once for each group and encodinng group to load in the assignment of "ChannelSet" in line 10 using the index group, like this:

  ChannelSet = "[1] / *" or ChannelSet = "[2] / *".

  I just found out that this example breaks in 2014 DIAdem because the 'DataFileHeaderAccess' command has been relegated and replaced by a new.  I need update soon.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Measures with the date Conference

  Hello

  I have to make an application, as part of my end of study project, which allows to calculate heat flow. Pour this, I have data measured with thermocouples. These data are stored on a data recorder that record these data on a .txt, .xls or .csv file (it is to be chosen by user).

  I'm not very chiseled with LabVIEW.

  In a Prime Minister, I tried to read the .txt file data. I can read the 1st line as I wish but not others.

  So I decided to work with a .xls file. The temperatures Conference goes smoothly. For time is the date, it's more complicated. Indeed, I would like to USE date and time corresponding to each measure to plot a graph XY with the date and time X and Y the temperature of the thermocouple.

  Kind regards

  Here's an example (VI from LV2011 but attached VI en LV2010) made on the basis of your code. Comment by watch it extract the news date and time of the string and generate the the from graph XY time in seconds in X. realized very quickly, it is without doubt room for improvement but you will serve as a basis for work at least.

  

  To define 'Structure box' serving at first as far as being 0 and calculate relative time to the following samples. Thus the x-axis of the graph starts at 0.

  My time is short, I renounce other comments but I happy to answer specific questions.

• If I update to windows 7 to 10 will I lose all the data stored, photos, etc.

  If I update to windows 7 to 10 will I lose all the data stored, photos, etc.

  Original title: carover

  If I update to windows 7 to 10 will I lose all the data stored, photos, etc.

  It seems that you do not have to back up your data regularly. A lot of people don't. By far the best incentive for them to change their habits is a disastrous loss of data. In this forum, we receive their calls for assistance with great regularity.

  To answer your question:

  • People do not back up their irreplaceable files regularly (e.g. weekly) will sooner or later lose them. It's only a matter of time.
  • People performing a major operation as an upgrade of the operating system considerably increases the risk of losing their data.
  • Those who backup their data without immediately pick up some examples of files on another PC often find that their untested backup is useless.

  This current position illustrates the problem.

• Maps JSON data with two data in the list

  Hey all,.

  Been working with JSON data and informing the lists for a some time now, but im stuck now on a single set of data.

  The data structure is the following:

  [
       {
            data: {
                 children: [ {
                      {}
                      {}
                      {}
                 } ]
             }
       }
  
       {
            data: {
                 children: [ {
                      {}
                      {}
                      {}
                 } ]
             }
       }
  ]
  

  The data that I take care of normally contains one of these structures and not 2 as in the above data. So what follows could could work:

                                  const QByteArray response(reply->readAll());
          ArrayDataModel *model = new ArrayDataModel();
  
          bb::data::JsonDataAccess jda;
          QVariantMap results = jda.loadFromBuffer(response).toMap();
          QVariantList children = results["data"].toMap()["children"].toList();
  
          model->append(children);
          mListView->setDataModel(model);
  

  However, it is now giving me an empty list. So how can I limit the above code to analyze and insert only the 2nd set of JSON data in the list?

  Please let me know if it needs to be clarified. Any help is appreciated. Thank you!

  Hello

  It contains a list of maps. Have you tried something like the following:

  bb::data::JsonDataAccess jda;
  QVariantList results = jda.loadFromBuffer(response).toList();if (results.size() >= 2){
      QVariantMap secondSet = results.at(1).toMap(); // to get the second map
      QVariantList children = secondSet["data"].toMap()["children"].toList();
      model->append(children);}