Measures with the date Conference

Similar Questions

• Print an e-mail with the date of the transmission

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  anniesol said

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  Problem is now solved! Choose the print option 'other measures' dropdown list allows email to be printed with the date of the shipment.

• See the time with the date in the cell?

  How do you not see time with the date in a cell? I tried all the settings I can find but without success.

  Using the numbers from version 3.6.2 (2577) - OS: El Cap 10.11.6

  I don't want to see that 12:00:00 AM

  

  Hi Russ,

  Inspector to format > cell, the parameters as shown below:

  

  Kind regards

  Barry

• problem with the data record

  Hi, I'm new to LabView so I know that the thing I'm doing is relatively easy, however, I'm stuck.

  I made a small program that gets 5 steps (for now replaced with random numbers) and as well as the date and time data in the text file. I intend to run the program for long periods of time, so I want to increment the file name/path every hour, but after the addition of this part of the program does not create any file, although the program runs without error.

  Block diagram is attached, could someone point out to me what is wrong and what I should do to reach my goal?

  Thanks in advance!

  Hi marcis,.

  Acually, the logic of the program was completely wrong.

  1. your comments the file path will never help you. Because after leaving of while loop, the structure of matter will run once and LV will stops running.

  2. open and close the datalog only once file. Try to make all your manipulations between opening and closing your file datalog. Otherwise, it will be difficult to manage when you develop your code.

  3 case construction outside the loop is meaning less. If you want to run the program permanently, place all functions inside the while loop you want to run. While the loop will run continuously until you get satisfied.

  4. incorrect data streams. All programmers need well with the data stream.

  Just go into the basics of labview here and try to realize your logic again

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• DM 4.0.0.833 and synchronization with the data-> TABLES DROP dictionary

  Hello

  I have a DataModeler physics implemented in Oracle database, I drop a table of data in DM maker 4.0.0.833.

  The database with the data dictionary synchronization and does not detect that you have deleted a table.

  
  Is this a bug? Or am I something wrong?

  
  

  Thank you
  

  Please mark the thread as answered if answer has helped you to solve the problem.

  Thank you

• Carbon X 1 with the date of availability of touch screen

  Carbon X 1 with the date of availability of touch screen?

  Welcome to the community.

  The X1CT seems to be available to order online now. You can right-click on the link to the Lenovo store top shop.

  Kind regards.

• What happens with the data on ROW as soon as they are storage migrated to VMDK?

  Hi all

  The following scenario: I have a virtual machine with virtual RDM. I have storage migration online, selection of thick discs so convert the VMDK RDM. The question is: what is actually happening with the data on the LUN that was RDMs, once the migration is complete?

  I expect that the data are still there, and if needed, I can remove the VMDK and re - attach the new LUNS as RDM.. But I can't find any official information on this.

  I am not mistaken? Y at - there somewhere that says clearly what is happening with the data?

  Thank you!

  Your wait is quite correct. The data on the raw LUN will not get affected once it is converted to a virtual machine. Only the mapping of RDM file is deleted and the LUN becomes available, and you can use card or again as an RDM or to create a VMFS data on that store.

  André

• LR6, newly imported photos not showing in the pictures folders with the date of the photo, where they are...?

  images are not displayed in a folder with the date that they were taken.  Imports have always downloaded in the folder of LR6 photo with the date of when the photos were taken.  Now I just downloaded 170 photos taken on 11/14/2015 and they are nowhere to be found.

  Hi marke,

  Depends on what place of destination has been selected at the time of import into Lightroom.

  It might be possible that the destination was changed this time.

  If you are able to see these images in Lightroom, right click / Control click the file or image and choose view in the Explorer/Finder and who will show you the image on your hard drive.

• How do I date stamp photo with the date that it was created?

  How do I date stamp photo with the date that it was created?

  donaldm80418165 wrote:

  How do I date stamp photo with the date that it was created?

  Use the text tool.

  Note that you can select the font, color, size of the pt.

• How to make a list of question field with the data type DATE?

  I have a column with the DATE data type. Using forms 6i I want to generate a poplist field of list item with this column while the value of the items in the list of names of days like SATURDAY, SUNDAY, MONDAY. If we change the date to a char data type, it won't work properly, but now with the data type DATE behind him, it gives the following error message
  
  "FRM-32082: invalid value for given the type of element."
  List WEEKREST
  Article: WEEKREST
  Block: EMPRESTS
  Form: module 3
  FRM-30085: unable to adapt to the shape for the release. »
  
  
  Using forms 6i how a list item field type DATE data which may contain names of days?

  Set your date as a hidden field (not shown) column. Create your item list with the names of day of varchar2. Create the list item as a base table field that accepts the values of text in the names of the days. On this area, create a when-validate-item trigger that translated the text into an actual date that it then uses to set the value of the real object of the base table.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• What is the best way to backup of virtual machines on a standalone ESX with the data store local

  Hello

  I want to save the virtual machines on a host ESX autonomous. and all of these virtual machines is the local data store.  What is the best way to save these virtual machines in this situation?

  And probably we don't provision VTL on the local data center, so it is possible to use VCB to backup? And VCB is a good choice compared to the traditional method that installs the backup client in each virtual machine?   Because I think that in this situation with the data store local, it cannot not reduced the load on ESX hosts and network overhead can be avoided.

  Thank you!

  LAN

  > 1. VCB usable remote tape library? I mean it's not local library and uses the tape library to another network data center.

  VCB is completely unrelated to the tape library, it is a framework, not a backup solution. If your standard backup software can work with the remote tape library you can try it to ungrateful with VCB.

  > 2. what the difference bwteen hot - added NBD and modes if there is that an ESX host with store data local and want to use a virtual machine like VCB proxy? I think that they are the same: the VCB proxy read data through the I/O of the ESX host stack in this situation.

  NBD works on network and the backup traffic goes through the service console connection. Hot add uses special machine for assistance to connect vmdk to and uses of e/s disk stack instead of e/s network.

  > 3. Veeam Backup is free software?

  No, it isn't.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Get-view FileManager = vCenter only? How to interact with the data without her store?

  Hello

  I am trying to create a folder directly on a data store and copy a vmx file.  What I've read I need to use Get-file manager mode, but this seems to be only available on vCenter.

  Is there anyway to interact with the data using PowerCLI store when it connects directly to a box of ESX?

  Thanks for your help,

  KeV

  The shortcut notation

  Get-View FileManager
  

  is not available when connected to an ESX host.

  But you can get the object as follows

  Get-View (Get-View ServiceInstance).Content.FileManager
  

  ____________

  Blog: LucD notes

  Twitter: lucd22