Mirrored volume has a status of Resync for several days

Similar Questions

• I tried for several days to install watchos3 without success.

  I have an Iphone 6 more ios10 running and a 42 mm apple watchos2 sport watch running (2.2.2).

  I tried for several days to install watchos3 without success.

  I have so far:

  Restarted my iphone and restarted my Apple Watch and tried again

  Removed the download of the update of the software > its use on the Apple Watch app and tried

  I reset all the settings on my watch and re-paired and tried

  The question is after the download on the screen of the software update is about 2 days left, he never moves forward.

  Still me have running overnight (twice) and ensuring that they are close to each other and connected.

  Any ideas what to do next?

  < re-titled by host >

  Hello

  Check that your iPhone is connected to the Wi - Fi (rather than the cellular data) and that you follow all the other steps here:

  Update the software on your Apple Watch - Apple Support

• Screen: For several days my laptop screen not turn off after a period of time, of no use. I have to put it in mode 'sleep' me or there is 'on '.

  For several days my laptop screen turn off after a period of time, of no use.  I have to put it in mode 'sleep' me or there is 'on '.  What happened to cause this?

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Try to reset the default power Plan settings. information is at the link above.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  And how to solve problems in Standby Mode is at the link above.

  And read the information of 'Related links', too.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install After Effect free trial, the page shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for several days.

  Cannot install After Effect free trial, the page shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for several days.

  Is this problem will soon be resolved? Thank you!

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• I tried for several days to update Adobe.  I tried with Kaspersky intact and turn everything off in Kaspersky I see turns off.

  Help, please.  I tried for several days to update Adobe.  I have

  tried with Kaspersky intact and all turn off

  Kaspersky I see turns off.  Please see the attachment for what I

  get when I try to update Adobe.  The first (1st) several pages show

  an attempt to update Adobe with following error messages during the last two

  (2) pages display the parameters of Kaspersky with everything turned off I have

  see turns off.

  If I understand correctly the CS5 update is no longer working properly. It is not your AV.

  Try to download and install the updates manually instead of through the AAM

  Adobe Bridge: For Windows: Adobe Bridge CS5 update 4.0.5

  Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update

• Why the Time Machine has been slain in 'update' for the days?

  My time Machine apparently has been "frozen" in the update mode days.  The last update indicated was four days; for at least two days the backup flash drive was quickly / blinking constantly as it does by updating. Icon Time Machine on Finder devices activity showed the constantly rotating circle ("update"). Time Machine preferences update status bar has been frozen at about 2% of the way across.

  FYI, a few days ago, a break of a few seconds completely stops the iMac - this time could possibly coincide with the beginning of this "freeze".

  I cut and restarted does not.  Your advice will be welcomed-thanks

  a few things could have happened, but is not limited to a failure or a bad drive.

  I reboot, check the source disk and make all necessary repairs with disk utility.

  If the problem persists, you can also check the disk of destination for damage.

  On what your source disk to destination and how the destination disk is connected to your mac? If it's USB it's thanks to a keyboard or a hub? If so plug it directly into the built computers USB port and do not deviate in a chain of USB devices such as a hub or keyboard.

• I have Firefox 10.0.1 for several days, and I lost all the favicons on my favorites. I thought that this problem has been fixed in V 10. Someone at - it a solution?.

  I have a pc running Windows 7 64 bit. I have the latest Firefox V 10.0.1, automatically updated several days ago. Everything was fine until about an hour before, when I launched Firefox and all the Favicons for my favorites are blank dotted squares. I checked this forum and found that this problem should be fixed at 10 V. well, he's back.

  What is the solution?

  I can understand why the favicons have been lost. Earlier today, I ran the story of Vipre Antivirus to address another question I've had. Who may have somehow caused the favicons to clear.

  Thanks cor - el for your suggestion. I ran of CheckPlaces and selected 'Reload favicons. He charged more, but not all. I also discovered that just open the bookmark, the favicon for the site gets reloaded. So those CheckPlaces cannot charge, I can recharge by simply opening the bookmark.

  Maybe someone can explain to me why the history cleaner wiped out the first bookmark favicons.

• VMware vcenter converter standalone physical conversion to virtual stuck to the completion of 81% for several days

  Hello everyone I have an interesting question, I'm physical conversion to virtual pointing to the new virtual directly on the server esx conversion would set schedule for a day. But now, it's just stuck at 81% and not go further! I don't get any errors of ideas? questions are there a basis that I can look to see what is happening? Is there a way I can fix it without start over again. There are enough resources on the destination esx I had to change the hard drive space for destination and ram, but done nothing radical imprint more small which I think should do better.

  It's an interesting case, you have here. I guess that conversion is complete, but somehow you do not see or a deadlock occurred.

  Anyway you will probably be able to export logs to the customer. Go to the directory of newspapers to %ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone\logs (for WP/W3K) or vCenter Converter Standalone\logs %ALLUSERSPROFILE%\VMware\VMware (for Vista +) and find the log of the last worker (vmware-converter-worker - .log #). The status of the conversion is currently connected. Take a look, or that she has finished, is still running, is stuck.

  If he has you can try restarting the client and/or server converter service. Do not stop the worker service unless you are sure that there is no conversion running!

  HTH

  Plamen

• LabVIEW System in the car for several days

  Hi all

  We strive to have a DAQ run in a trailer able to travel and expenses for three days several.

  In our previous tests, we used strain NI 9236 seven modules and a NI 9205, connected on a chassis CampactDAQ ethernet analog input module. This chassis is then plugged into a laptop that is running our software. It was all done inside, where we could use a standard wall outlet for the power supply.

  I was wondering if there was anyway we could make this system even run for 3 consecutive days, where half of the day, that data acquisition will be fueled by the power of the truck power, but during the nights, the system would have to run off a power supply 10VDC or similar.

  Does anyone have ideas on how to feed the system or external power supplies that would be able to last three days, while the system is running?

  Thank you!

  Hey cjwarren,

  This page NOR a lot of information on the power of your system cDAQ, it may be useful!

  http://www.NI.com/white-paper/52635/en/

• Broadband went down for several days but was back on property that still cannot access the internet

  Went away for two weeks and return to find internet and landline phone at the bottom, contacted bt which were going out but it all came back to the top, light on bnroadband but still cannot access the internet!  Any answers please...

  Contact your ISP to solve problems.

• Cannot send emails for several days. Just comment to stop spammers may ask you to insert characters before sending them by email. Nothing seems to work.

  Have tried several times without success and must respond to emails for emergency.  Some of the emails seem to go to the project.  Message concerning the procedure to stop spamming but does not actually ask you to insert characters as it is said can ask.  No such problems before.  Help!

  Hello

  1. what browser do you use?

  2. what email provider do you use?

  3 How long have you been faced with this problem?

  If you use Internet Explorer, you can follow this link & check if the problem persists:

  How to reset Internet Explorer settings?

  
  Note: the feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope the helps of information.
  Please post back and we do know.

• While trying to update my applications CC (2015), I get "update failed" error (49) even try again for several days. He says he's blocked a critical file - but which and why? How cab I do it. (under Win7). Thanks in advance, Dominik

  

  suspend the antivirus and anti-malware programs.  so try and update.

• Starting point for 30 days trial version

  Hey!

  I really want to work with a good video editing software. So I downloaded the trial version of "adobe Premiere Pro".

  But I realized, I didn't have a lot of time in the next few weeks, so I would like to first 30 - days - trial version not immediately.

  
  

  My question: how the 30 days begins from?-

  I downloaded Premiere Pro via the cloud of adobe creativ. But I didn't click on "Start the Test" (see the picure below).

  Has already begun the countdown for 30 days?

  
  

  
  

  Thanks for all the answers!

  No, it starts the first time you actually, using the program - at least in theory. Many times it does not work with reliability and the meter will run out, whatever, which gives a warning of expiration. Well, anyone, you just see.

  Mylenium

• Win7 mirrored volume resync take days to complete

  I just built a new system of Windows 7 SP1 and I wanted to create a mirrored volume to store a large amount of data.  The system has three disks:

  * A system of 1 TB drive

  * 3 two red TB Western Digital WD30EFRX drives

  I have set up two disks of 3 TB as a successfully mirrored volume and at first everything seemed fine.  I came just to check the disk manager a few days later, however, and I noticed that the volume status is "Failed redundancy" and one of the disks has a yellow exclamation beside him with a status of "error".  After a bit of web, research, he sounded like one of the disks had abandoned the volume for a reason, so I followed the instructions of TechNet to reactivate the disk (http://technet.microsoft.com/en-us/library/cc786839%28v=ws.10%29.aspx).  The volume immediately began resynchronization.

  Although he seems to be synchronize successfully, I'm a bit concerned about how long it takes.  I expected to take several hours; maybe even a day since it's 3 TB RAID software.  When he started first sync there was no progress indicator, so I just let it go.  It's "rescyning" for over 2.5 days and a progress indicator just published - it is now 6% (screen shot included).  A few quick calculations indicate that, at this rate, all resync will take about a month.

  I just can't believe that it is correct; I guess that something is wrong.  I got 10 TB software RAID arrays that have resynced in less than a day.  I don't have much experience with Win7 volumes in reverse, so I hope someone has an idea.  It is a new system with modern components; It's a multi-core with 8 GB of memory processor, these are disks SATA 6 Gbps, and system disk is separated from the mirrored volume.  Both drives pass SMART tests, and chkdsk reveals no error.  Hardware RAID is not an option.  Any ideas?

  

  Thanks for the detailed answer!  I think that the question was probably due to a restart related to Windows Update as you suggest; I think that the system restarted automatically because of an update shortly before that I noticed the resynchronization.  Assuming that this is the case, it's a mystery why Microsoft has not fixed yet.

  I finally gave up on crossed my fingers and just rebooted the system.  When he returned to the top it seemed to have already begun the process of resynchronization on its own.  I was disappointed at first that she had begun at the course early. However, I then noticed it was resynchronize much more quickly.  Performance monitor showed same much faster read and write speed, and in a few hours, full status indicator percentage was already well into double digits.  The resynchronization is complete after about 6 to 8 hours, which is all that I expected.  Since then, the volume status is 'healthy' and I restarted several times without additional problems.  I have no idea why restart magically solved the problem.

  I guess that means I'll need to look at whenever the system reboots after you have applied an update and just hope that if this happens again, a quick restart will fix it.

• The OCSP server has no status for the certificate

  From just today, whenever I try to access www.fanfiction.net, I get this error message from FF: -.

  "Secure connection failed".
  An error occurred during a connection at www.fanfiction.net. The OCSP server has no status for the certificate. (Error code: sec_error_ocsp_unknown_cert) "

  I already tried removing the Cert8.db and Secmod.db and uncheck only the two OCSP parameters d ' option in advance. Neither work. The site is accessible to any other browser so it's really Firefox question.

  Need advice on how to fix this ASAP.

  the issue seems to have been fixed by the site already, you can go ahead and give security.ssl.enable_ocsp_stapling to true.