Why the Time Machine has been slain in 'update' for the days?
My time Machine apparently has been "frozen" in the update mode days. The last update indicated was four days; for at least two days the backup flash drive was quickly / blinking constantly as it does by updating. Icon Time Machine on Finder devices activity showed the constantly rotating circle ("update"). Time Machine preferences update status bar has been frozen at about 2% of the way across.
FYI, a few days ago, a break of a few seconds completely stops the iMac - this time could possibly coincide with the beginning of this "freeze".
I cut and restarted does not. Your advice will be welcomed-thanks
a few things could have happened, but is not limited to a failure or a bad drive.
I reboot, check the source disk and make all necessary repairs with disk utility.
If the problem persists, you can also check the disk of destination for damage.
On what your source disk to destination and how the destination disk is connected to your mac? If it's USB it's thanks to a keyboard or a hub? If so plug it directly into the built computers USB port and do not deviate in a chain of USB devices such as a hub or keyboard.
Tags: Mac OS & System Software
Similar Questions
-
Time Machine has not completed back upward after 4 days
I'm using Time Machine (that I never liked). I bought a new 27 "iMac and a 5 TB Seagate external hard drive. I assigned the Seagate drive as the backup drive. After 4 days, the wheel keeps spinning, but the backup of files are never finished. I get no error message or indication of a problem. Any ideas on what's going on?
Format you the new hard drive (Mac OS X extended (journaled) and GUID partition scheme)?
How the Seagate is attached to your iMac - USB, Thunderbolt or?
-
How long does take Acobat Dc? He, s been stuck at 84% for 45 minutes.
Hithepopshop,
Restart your system and try again to install Acrobat Pro DC download and install Adobe Acrobat DC.
Kind regards
Nicos -
My iMac has been slain on the wheel that turns for hours after I entered my Apple ID in the Setup
My iMac has been slain on the wheel for hours after I entered my Apple ID in the installation program do I do?
Hold the power button until the screen goes black.
Wait at least 10 seconds, then press power once to turn back on.
If you still have problems, boot in Safe Mode boot Safe Mode.A removes the system caches that can help.
Upper left corner of your screen, click on the Apple > Shut Down.
After your Mac stops, wait 10 seconds, then press the power button.
As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
Release the SHIFT key when you see the gray Apple logo and progress indicator.
Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot
On Safe Mode
-
virtual machine cannot start, because the snapshot of the virtual machine has been deleted by mistake.
When I start this virtual machine, it prompts: unable to find the 0001.vmdk, this disc is my shot, has been deleted by mistake.
How to restore this virtual machine.
You need help with a revival of the 000001.vmdk deleted or do you want to repair the virtual machine so that it works without the snapshot?
The last option, follow these steps:
remove the virtual machine from the inventory and edit the vmx file so that it uses the basedisk. Then add the virtual machine to inventory.
If you need data from the snapshot call me through Skype "sanbarrow" - I may be able to help -
I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10. I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium. What should I do to get loaded and enabled on my computer?
That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.
Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html
-
I'm trying to download the trial version for photoshop, but it has been slain for hours on the page says download of Photoshop. Can you help me?
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.
-
Time Machine does not work after update of the Sierra
The time function machine my Mackbook Air 2011 stopped working... it has not been saved since update for Sierra, it only take screenshots every hour, it will perform a backup is no longer on my external HD as before.
There is no problem with the way it is implemented or the hard drive, it's me that my iMac is working perfectly since the update for Sierra and it's backup via the time machine on the same hard disk.
It is a hard drive and put in place I was in use for about 5 years with no problems.
Also since the update for Sierra I noticed that my MacBook Air gets hot and the fans go wild, although there was nothing or performance other than the system is auto.
I lost the use of my built in camera after the update to El Capitan, and now I've lost the use of time machine... I was wondering if I should go back to Yosemite that everything worked well then!... is this possible?
Thanks for any help with this!
Update:-just so you know, time machine is to find the back up ok drive (external hard drive), it then goes to "preparing backup" and that's all, he remains in this preparation save the scene for centuries, after a while it just stops and it is saved all... nothing!
Also noticed when I checked in Time Machine full backup I have before update for Sierra disappeared, he disappeared, been deleted... I don't know what is happening with it!
Overall since the update for Sierra my MacBook Air did not work properly, in addition to all that Safari does not load, just to get the wheel spinning, and now (with the demise of my old back ups) it seems I can't go back to a previous state.
My Mackbook Air took it!... the last update took the camera and really Sierra in... material not compatible with all new software, none of the new features work on my iMac or MacBook Air (only Siri), so a useless upgrade for me really, wish I didn't!
-
was why my ID apple has been disabled?
Why my ID apple has been disabled?
You may have entered the wrong password Apple ID too many times.
Follow the instructions here > Apple ID: alert ' this ID Apple has been disabled for security reasons "appears
-
My windows 7 has been slain in case of failure of blue windows reconfiguration for hours.
My windows 7 has been slain in case of failure of blue windows reconfiguration for hours. How should I do?
Hello
Thank you for the update.
I would ask you to try the suggestions in the following article the basic error that you receive.
Note: Please ignore the section Upgrade Perform an on-site (resettlement) (Windows 7 and Windows Vista)
I hope this helps.
-
I just bought Adobe story, but when I press on connect it appears a ST logo with a spinning @bar that has been on my screen for hours
Can you please try the following?
-first of all, make sure that you have flash player update. You can get the latest version of https://get.adobe.com/flashplayer
Now open a session in anticipation of history for some time see if it solves your problem or not
-If it don't then try opening your browser's private browsing/incognito mode and try connecting to the story from there
If you are able to connect then you should try clear the cache and cookies of your browser
-
My laptop has been out of service for Windows 10 preview and free offer, but now work. Is it possible to get the upgrade for Windows 10 free?
Hello
You buy Windows 10, as there is no free upgrade to Vista 10.
Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.
http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/
How to buy Windows 10:
http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700
But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.
https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs
" System requirements Windows 10"
https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements
Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015
"FAQ Windows 10.
http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ
See you soon.
-
Time machine no longer works after update to Mac OS Sierra
Backup Time Machine has stoped working on two of our Macs, I've updated for Sierra (MacBook Pro 15 "beginning 2013 and iMac early 2016"). They don't backup but are blocked for days now in the 'backup preparation' (connected via gigabit ethernet). The iMac uses our backup NAS (Synology DS216j) and a USB HD (Maxtor), now it can't mount the USB HD or, as the MacBook Pro, get to the point of actually perform a backup on the NAS backup server. All computers (all six of'em, five Mac and a Windows thing) was perfectly support towards the top, but those updated for Sierra no longer.
Someone else who has had this experience and even has a clue what to do about it?
Hi Dr. freon!
Thank you for joining the communities Support from Apple! Looks like you are having problems with the Time Machine backup. I know how it is important to be sure that the computer is properly back up at any time. Check out this article which talks specifically of macOS Sierra: If Time Machine still at the stage of "preparation". He has some suggestions of what can cause problems with the backup of your stay to "prepare".
Another option is to read this article on macOS Sierra: Time Machine troubleshooting.
See you soon!
-
Microsoft has never issued an update for the Win7 disk defragment utility?
Microsoft has never issued an update for the Win7 disk defragment utility? Thank you.
Original title: Win7 updates
To my knowledge, the Defragmenter from Windows 7 has not been maintained since the liberation. You have a problem with it?
-
My external hard drive (Time Machine) has not been saved for a month.
A month ago I left town for a week. After coming back, I noticed my icon time machine backup constantly Menu bar, but I paid no attention until three days when he tried to save in vain, I noticed. I tried to disconnect and reconnect my external hard drive, but it still does not work. Nothing has really changed any other times where I was out of town and time machines worked perfectly well. The only thought I have, which could prevent the machine from time to work, is that I've been reluctant to do the software update. I heard terrible things about the captain, especially when it comes to iPhoto, and iPhoto is my main thing on my computer... so I had voluntarily decided to not update. Do you think that this is what is causing the problem? Thank you very much.
You him have not said if you did all troubleshooting. Tell us what troubleshooting have you tried, and then we can give you an idea.
Furthermore, El Capitan is very stable. However, you should not pass until your system is stable.
Maybe you are looking for
-
Setting up my HP Officejet 6500 has more the Question: first install the disc?
Hi all! I was wondering if I should install the disc that came with my HP 6500 has more printer FIRST before connecting it to the top wireless? Or connect upward wireless first before installing the drive? I saw somewhere where the plug & play when t
-
The 8 HP flow supports secure logon (Windows key + power)? Try to diagnose if it's a windows 10 problem mine is going to sleep if I try to use it. The part made tablet of a domain as rrequires it.
-
I have a ' aspir ' 5750-6414 I got a bad virus, but I did create recovery disk (4 or them) I would like to recover my computer by using the recovery IMAGE. The bootable disc, but it does not give me the option to use MY recovery disks. It gives only
-
Awhile back, I stupidly downloaded Arcade yum. (DO NOT DOWNLOAD THIS PROGRAM) Apparently, I thought that I deleted in the uninstall programs, but not completely deleted. This program has always tried to load all types of advertising or not I was on t
-
F4400 with XP. every third line of the text fell. It happens with word, wordpad and the detailed test form. (impressions after having held power + X keys) in addition, certain text colors do not print, but bars on the detailed test printed in color s