Misdiagnosis

Similar Questions

• Misdiagnosis of memory Windows with default installation factory of Lenovo

  I have the following error in the diagonistic memory of windows, the memtest.exe file is missing or damaged. Please see the attached picture. I need to solve this problem, please help.

  I found the solution for this problem. Now my Windows memory diagnostic runs. Solutions if you encounter a windows key on the back of your laptop, then upgrade your existing windows with the same install an example of disk: If at the back of the laptop, Windows 7 Home Prem OA how it printed then do a windows 7 Home Premium 64/32-bit with upgrade of the disk of installing SP1 windows without using the Express upgrade and tool when you have finished enter your key provided at the back of the laptop. This update will replace all startup files and Windows files. Now check the memtest or Windows memory diagnostics, it should work... !!

• Pavilion dv7-6b57nr: misdiagnosis of bios Insydeh20 501 / recovery has not re details save

  Case: 3024768463
  Wiping drive
  Recovery retried
  Received the error found no indicator is set to unit, use EEPROM to set sku = 2
  CTO error condition has been detected in the phase of factory update

  I tried to get like 10 times with disk ordered Hp recov.
  Tried restoring to the same problem of disc disk.com
  Spoke with ho support
  They sent me new disk
  Re ran recovery with new drive after drive
  No luck, same error
  Tested drive short and long history
  750 GB at 5400 RPM don't drive no error found

  BIOS of diagnosis indicates error 501
  Read about disabling fast book or links in the bios
  Bios Insydeh20 without advanced options
  From the BIOS to f.1c

  Discover wireless blue light not turn not
  Tried several times to get wireless to change to blue is orange
  Rest of talk details recov error set uia to 951
  Fix start ups .cmd
  Create complete progress information

  SDRD tweaks to change the regional settings default user
  C:\System.sav\util\Tdc\Mcpp\FBIRES\FBIUSRES.dll copy
  Run Dism.exe/image:c\set-skuintldefaults:en-us-image: c:
  -----------------
  Launch PININST.exe for offline
  Housing starts [sleep 10 sec]
  Housing starts [creation RstoneFupdate.ini]
  Start to [create the pagefile of 1 GB for offline]

  Volume in drive c has no label
  Volume serial F0F2-0DAD

  Directory of C: \system.sav

  Starts Sysid check
  Country 244
  Loc sys def = eng us

  Reset country administrator
  Reset the default user country
  Reset system

  Start PIN Tweaks
  PIN Tweaks to hide all for BurnBoot PBO and BBV2 on the restored image
  Tweaks for OOBE unattended.xml
  To pick up the appropriate page file

  Rename unattended.org to unattend.or
  Without light sensor

  It is restored by SDRD SSRD.flg image

  Beginning Mir Tweaks
  MIR Tweaks
  Starting update factory
  Start the installation of Qfe offline
  PININST_Off: adopted

  Type system.sav\logs\ BBFinder.log C:\
  Type C:\system.sav\logs\BBFInde0.log
  ---c:\System.sav\logs\PININST_Off.log
  Last result
  Check fulist.log to see if there are duplicate describe
  No duplicate
  Duplicate No. describe found... Past
  There was no update from the factory

  Yet once elapsed without errors.
  Read several forums on Insydeh20 in legacy mode
  Advanced number of options in the bios do not know how to get the various bios options
  Tried to not launch the he utility before recov sp45645 no chance
  Can someone help I'm lost
  Pretty good tech
  Tried to remove ram and battery of camps
  During the night no luck
  Tried by force to the low no luck
  HP dv7-6b57nr
  Several restorations with 2 sets of disc Hp recov
  1 set of disk restore disk.com
  BIOS card mother serial 4cb14521cb
  Read about the series does not also possible motherboard

  Please help end

  Hi Ben71,

• HP laptop - 15-f211wm (contact: Windows does not not misdiagnosis)

  2 days ago, my laptop worked fine. Yesterday, it took a lot of time to start abd, once past the windows welcome screen could not load. After about 20 min it says windows failed and the program needed to close.

  Today, I was finally able to get into the diagnostic mode and got the following information.

  Test drive: 1

  verification of DST short of hard disk: failure

  failure ID: qbxw13 - 7 St. 861 - mfpwmf - 60ra03

  hard drive 1 - Bay primary HARD drive *.

  component test: failed

  It was purchased 12/15. I just run a scan full 3 days ago and everything was fine, and there is no virus.

  Hi @CharityO,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that the laptop suddenly cannot be started, and you got the error code "qbxw13 - st 7, 861 - mfpwmf - 60ra03" after the test hardware.

  It seems that one of the drives needs to be replaced. Back up your files if possible. Contact the HP support by phone to repair the laptop is still in warranty.

  Please the following link http://www.hp.com/contacthp allows you to create a folder for your problem and contact HP. If you do not live in the United States / Canada, please click on the link http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html to get contact information for your region.

  Please let me know if that solves the problem by marking this message as "accept as a Solution.  To simply say thank you, click the thumb upward below!   If you need more assistance let me know and I will gladly do everything I can to help. Thank you.

  Kind regards

• I am more able to send emails in Outlook Express, misdiagnosis: ' outgoing server does not.

  .. . Only receive them. It worked until a couple of days.  A diagnostic test says ' outgoing server does not... He asks me to return my password... I have are about running a new diagnosis and said "everything is now functional... but always coming out does not work."

  original title: using OUTLOOK EXPRESS I can no longer send emails

  Remove your e-mail account, close OE and then reopen it and add your account to mail back again and see if that fixes things.  If this isn't the case, then some diagnostic test you run must also explain that you can not control the SMTP server yourself, and if he has any questions, then you should contact the vendor of the SMTP server.

  Steve

• Misdiagnosis Vista memory 1202 results

  Wondering if someone could possibly have a solution for the problems I experienced.  I have the OS Vista Home Premium 32-bit system.  Since then, the PC has been freezing.  I ran a memory diagnostic check and it shows that I had hardware problems.  When I watched the event in the error number administration tools was 1202.  The speed of the RAM has been updated only a year ago for max 3 GB (it was 1 GB) and it worked fine until about two months ago.  I did a system restore thinking it would solve the problems, it does not.  I realized a cleaning disc.  I checked pc viruses and malware - nothing.  Thus, it happened today that I have conducted an audit of Mem Diag and it's a hardware problem.  If anyone could help us with that until I bring it to a technical expert, it would be more useful!

  Hello

   

  Welcome to the Microsoft community!

   

  The computer has been freezing and you get error 1202.

   

  The problem may occur if some of the operating system files are missing or there is problem with the RAM. To check, I suggest you follow the steps mentioned below:

   

  Method 1:

   

  Remove a strip of RAM at a time and check if the problem persists.

   

  Note: Do this only if you know how to do otherwise, ask someone who knows to do.

   

  Method 2: File system (CFS) Scan Checker

  SFC scan will find all missing or incorrect system files and repairs them.

   

  See the site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

   

• Misdiagnosis ora-03137 tool where to download files (*.log, *.trc)

  Hi all

  I had the error of one of the production database - ora-03137 ttc protocol error internal 12333

  After reading the documents, I went to the support page to create a service request.

  Asked me to use the utility - ORA-3137 troubleshooter for a quick solution.

  In the second stage by selecting the type of files to download, I chose Alertlog (optional).

  After download, the log files and trace in the troubleshooting tool files when you click on the next button I get an error.

  Select the required file () (s) to download and click Next when you have finished to continue.

  Also the same error when I choose Download the trace file)

  What I am doing wrong? And what type of file so that it is necessary to download?

  How can I download files to get solve my problem?

  Thanks in advance

  Kind regards

  Ravil

  Hi Ravi,

  You already have a SR created with the support of the Oracle.

  You tried to paste the problem to SR and asked engineer Oracle working on the case to help you?

  If this isn't the case, you should ask engineer Oracle assigned to your case that would be the best to help you.

  HTH,

  Pradeep

• Misdiagnosis: an unexpected error occurred while running the test.

  Hello
  
  We get an error when running the diagnostics of the application.
  
  An unexpected error occurred while running the test. Please change in developer mode to diagnose the problem.
  
  When checked the logfile oam... find the error...
  
  [7:46:6:50, 23/10/12] ORA-01653: unable to extend the JTF table. 16 in the APPS_TS_TX_DATA tablespace JTF_DIAGNOSTIC_LOG
  
  [7:46:6:50, 23/10/12] Error occurred: Possible reason could be the problem of database
  [7:46:8:807, 10/23/12] oracle.apps.fnd.oam.servlet.ui.util.ICXSessionUtil:... Free WebAppContext. Success! 87001be8b7e98498707a33c28164a8430f84d19173d5fe690c23a04167fb07a7
  [7:46:9:100, 10/23/12] - 2c48bb90:13a885214b3:-7fef
  [7:46:13:825, 10/23/12] oracle.apps.izu.general.diag.RDAACT.runTest (oracle.apps.fnd.oam.diagnostics.exec.ExecutionContext)
  [7:46:13:826, 10/23/12] oracle.apps.izu.general.diag.RDAACT.runTest (oracle.apps.fnd.oam.diagnostics.exec.ExecutionContext)
  [7:46:16:45, 10/23/12] - 2c48bb90:13a885214b3:-7fef
  [7:46:18:761, 10/23/12] oracle.apps.izu.general.diag.RDAACT.runTest (oracle.apps.fnd.oam.diagnostics.exec.ExecutionContext)
  [7:46:18:762, 10/23/12] oracle.apps.izu.general.diag.RDAACT.runTest (oracle.apps.fnd.oam.diagnostics.exec.ExecutionContext)
  [7:46:18:762, 10/23/12] oracle.apps.izu.general.diag.RDAACT.runTest (oracle.apps.fnd.oam.diagnostics.exec.ExecutionContext)
  
  Please advise...
  
  Kind regards
  Fahim.

  ORA-01653: unable to extend the JTF table. 16 in the APPS_TS_TX_DATA tablespace JTF_DIAGNOSTIC_LOG

  Seems like tablespace APPS_TS_TX_DATA is saturated, you need to add space.

  Use script below about the space available in each data file:-

  Select substr(df.tablespace_name,1,45) table_space,
  Sum (FS.bytes) free,
  substr(DF.file_name,45) Name_of_File.
  DF.bytes,
  substr (DF. Status, 1, 5) stat
  from dba_data_files df, dba_free_space fs
  where df.tablespace_name = "APPS_TS_TX_DATA."
  Group of substr (df.tablespace_name, 1, 45),
  substr (DF.file_name, 1, 45),
  DF.bytes, substr (DF. Status, 1, 5);

  ALTER DATABASE DATAFILE '' RESIZE 3000 M; - increase the size according to your need and availablitiy.

  Thank you
  JD

• Air bubble in the screen X 61 LCD Tablet

  My X 61 Tablet is currently guaranteed but I have repeatedly rejected by links of 'technical' Lenovo declaring that it is hours billable damage caused by the user. Apparently, I've been asked too much pressure on the LCD screen bringing packed - several times.

  Here is the chronology of events that shows the incompetence of their so-called engineering team.

  -Online all about end of August 2009, I see a bubble of surfacing of behind the bezel 2 "the edge at the bottom left of the screen

  -Online I follow the routine to open a ticket, got a box, copy and backup data, box / send the machine and prepare weeks of lost productivity without a laptop

  => After nearly two weeks, I have received communication about the bubble and am told immediately that the fix would be chargeable (about $700) to replace the LCD screen if I chose to move forward

  => I have request an escalation and a more accurate report of what they thought the problem was. That whiles away several days and I get a picture of their repair center
  IMAGE: http://ivywood.org/Pics/Misc/lenovo/19241050.gif

  =>, They put a sticker next to the bubble and asserted that he was a crack due to pressure on the LCD screen. "Even the slightest pressure can sometimes cause a crack to appear. Never mind the fact that a Tablet is intended to be used with a pen that [U] must somehow make contact with the LCD screen! [/U]. I also explained that the laptop has not been used with a pen for a long time, so even question of the application of pressure.

  -Online three weeks after the debacle, I get another say there is has nothing that Lenovo will do since it is a damage caused by the user. I really wanted to know how this was determined so I started to probe further. Now the explanations get really outrageous.

  "Lenovo: a crack on an LCD screen, it's like a windshield of a car." It can grow over time. »

  Note that a crack in a window without deriving a few inches over time. It can grow but it does not move

  "Lenovo: Mr President, our technical department is the last word on this issue and they have determined that it is a chargeable repair.

  At this point, I'm getting argumentative and challenge the jurisdiction of the people doing this diagnostic.

  "Lenovo: If you think that we made a mistake, you are free to go to a small claims court." Is there anything else we can help you? »

  Way to go from Lenovo. Home customer service is the best

  Fast forward to two months and November 5, 2009, yet another bubble starts appearing behind the bezel from exactly the right lower corner. Once more, in this case off no provocation whatsoever. First of all, I see a tiny line on the edge as I work that develops slowly in a semicircle.

  IMAGE: http://ivywood.org/Pics/Misc/lenovo/DSC_7168.jpg

  This time I wanted to make sure that the movement of the bubble is saved so I took another photo a day later

  http://ivywood.org/pics/Misc/Lenovo/DSC_7170.jpg

  =>, I opened a ticket and get the first support call normal. Ask them to refer to the post previous DNHDGY8 before that I take on the hassle of being without a machine an indefinite period of time.

  => It goes without saying that I got the same answer that once more, I put too much pressure somewhere.

  [QOUTE] We are unable to determine what caused the damage, but once it's here, and our team determines it is damageed we can do a chargeable repair. We cannot determine which determined what caused the damage, because we weren't there when it happened [/QOUTE]

  No matter how many bubbles appear from nowhere or no reason, is somehow my fault. I suggest that it clearly resembles a problem in the manufacturing sector. However, incompetent repair team has the last word, so I don't know how it can never be described as a matter of generation. It almost seems that these game acclaimed experts are required to report issues that they do not understand as a customer mishandling.

  Now, I'm not saying this is a matter of MFG. without reason. If you notice, the lower right corner of the screen on a X 61 becomes very hot. The LCD itself is composed of several layers and bound with the edges open to the air. Continuous heating and cooling mastic can deteriorate over time. If even a specification of air is trapped in this phase, for example between the glass and the polarizing film, what happens during the next heating cycle? The bubble grow first and because of the pressure variation, try to move away from the heat source, raising.

  That's what I could deduce so far. One thing any technician silent willl confirm is that it is surely not a crack!

  LAST UPDATED NOVEMBER 6, 2009
  I was struck once more, but I kept the open ticket so we will see how this past time. It is not a question for $700, but more info on write off a problem with misdiagnosis and inadequate technical reasoning. It is almost about to be fraudulent.

  I guess that many have faced this problem had not said anything. Hope this helps someone. I'll update here as this case unfolds.

  
  

• Pavilion g series: HDD test failed

  My laptop started acting funny after an automatic update Windows 10. Ran misdiagnosis and get

  Failure ID 60AF0J-64B84Q-MFGK0J-60WE03, A6Y42UA #ABA product ID.

  I could not find the error code in the forum, no one knows what it is? Thank you!

  Error codes are generated only by the diagnostic program, so no 2 are the same explains why you do not. This means that the hard drive needs to be replaced.

• Windows Vista update Changelog

  Hi, I would like to know the changes made to windows on patch day operating systems, very little as a changelog, during software update. I'm the head for an access provider support technician, and I need to keep abreast of any changes that may occur in Microsoft operating systems. Right now I have a problem with a Vista machine where the ethernet port did not work yesterday morning (South African Standard Time) and this morning the ethernet port works fine. As a result, our client is very happy with us we have misdiagnosed the situation. So, basically, I want to know if he had made to the Windows Vista operating system updates and other updates that may occur. I understand that Microsoft releases patches every Tuesday (if necessary) and yesterday, Tuesday, February 15, 2011. Maybe there's an RSS feed of all updates from MS?

  Thank you

  Jonathan Fourie

  IP Phone SA PTY (Ltd)

  For just the list:
  http://www.Microsoft.com/technet/security/current.aspx

  The page has a lot of information that may be of interest to you, including "Microsoft technical security Notifications.
  http://TechNet.Microsoft.com/en-AU/security/dd252948.aspx

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• ePSA error hard disk

  Hello

  My Alienware is still under warranty and the HD has played upward.

  Windows was throwing errors in the center of action for some time and have most of the applications on the ground to stop. Sometimes, the system hangs up to 10 minutes before playing catch up.

  I ran the ePSA and the system checks the hard drive test.

  I can't however entry in the section 'you already have a code of misdiagnosis of ePSA running?"in the support part of the web site.

  That's what I get:

  Error: 2000-0142

  Validation code: 123200 (it was (114425 yesterday)

  Reference number: 5VPCRH55

  Service tag is [Admin NOTE: maintain the label removed in accordance with the TOU strategy]

  What can I do to fix this?

  AussieAlienware

  The error code indicates the disk hard does not, or does not, and you will need to replace it.

  As there is a Dell warranty in effect, you must contact Dell Technical Support to replace the hard drive.

  Bev.

• How to add the release key to SX20 TC7.1.0

  After upgrading to TC7.1.0.48db3d2 SX20 had misdiagnosed:

  REVIEW: Valid unlock key

  Missing the key release for undefined. The system will not be able to make all the calls. Please Add a unlock key valid.
   

  But canned-> software update, I might add only the Option, NOT the release key key

  How can I add * key to liberation?

  Hello

  you need would not release key for the upgrade over version 6.3 TC.

  Adding release key tab on GUI is removed for the same.

  However, you always have the option to add it via API, you can use below command:

  xcommand SystemUnit ReleaseKey add:

• What is Lexmark X 422? I have a yield sign on my pc an error of diagnosis,

  Original title:

  What is Lexmark X 422?  I have a signal on my pc, misdiagnosis, I've never had a lexmark printer or camera.

  I click on troubleshoot I get this

  I click on apply this patch, I get this

  I went to lexmark driver update there is no change.

  How can I fix it.

  Hello

  Exactly where do you see the next sign "performance"?

  Lexmark X 422 is a printing device.

  You can try to uninstall the driver from Device Manager and check to see if it helps:

  Try the following steps:

  a. open the Device Manager.

  Check the following link to see how to open Device Manager:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  b. find the device and expand it. Now, right-click on it and select Uninstall.

• Several files with the same name.

  Cannot publish to Business Catalyst because of a fatal error, where it is said "why do we have several files with the same name?  The website and all its contents have not changed in more than a year with the exception of minor changes to the wording so unable to understand what the error is encountered. Are there not better misdiagnosed at one point less for the files in question.

  The problem is the result of a mixture of case-sensitive and case-insensitive between how files within the .oam are put into interaction with and what is written in the muse_manifest.xml file during a re - download full compared to an incremental download.

  If all .oam packages files are tiny and the original .oam were replaced in Muse with the all new tiny .oams, then you should select Upload: publish all the files in the dialog box Options. From there, forward publication of incremental changes should work without errors.