Miss C Quick Module for cDAQ-9137

Hi all

I'm trying to implement a cDAQ-9137 for continuous data capture, without monitoring and logging for a long period of time (2 weeks +). I just created a new empty Labview project and added my cDAQ as target. However, when I right click on my cDAQ and go to 'Add targets and devices', the guest of the C module is missing, the only option is ' Chassis MXIe-RIO ". I was trying to get out of this tutorial: http://www.ni.com/tutorial/52027/en/

I have attached a screenshot of the measurement and Automation Explorer and the guest of labview. In particular, I am trying to add the 9232 OR "cDAQ1Mod3." It is installed, and I can run a panel of test with him.

I'm a lab intern, and I have not much experience with labview, so any help would be greatly appreciated.

Hi AbeG,

Thank you for fixing the screenshots of your project and MAX OR this post on the forum! Unfortunately, I don't have a CompactDAQ real-time directly available to test for the moment, but I'm fairly certain that you should be able to read I/O without adding explicitly in the Modules of the series C with your cDAQ. The reason why you must explicitly add the CompactRIO modules targets is because modules runs in the interface of the Interface of scanning or FPGA. With a goal of RT CompactDAQ, there is no interface FPGA option; instead your controller will read I/O to your Modules in the series C directly.

If there is not an option for 'Module of the C series' in the submenu again when right clicking the target RT CompactDAQ, then I am inclined to believe that you should be able to target by device name thereafter. I want to say is that if you create a VI using our DAQmx API below your target RT CompactDAQ, you should be able select "CDaq1Mod3" as a material target for this task. Please check that is a DAQ Assistant or create a task DAQmx simple acceleration (or whatever it is you measure) under the lens of RT CompactDAQ. Thank you!

Tags: NI Software

Similar Questions

  • How do I reinstall the ACPI Modules for W2k on Tecra 8100

    I need some information on how to reinstall the Modules ACPI for Windows 2000 on my Tecra 8100. I get a message indicating that "there is missing files to use Toshiba Selectbay Service getting started. Please re - install for Windows 2000 "Toshiba ACPI Modules.

    Anyone know what this means?
    It started to happen after I tried to install the update 'Value-added logical device' on the Toshiba site.
    I suspect it was probably already on the computer, that's why the installation failed.

    Any thoughts would be much appreciated.

    Hello

    I found the description of this file.
    The value logical device is Toshiba ACPI common modules for Windows 2000 support.
    This software is the Foundation for other utilities provided by Toshiba Win2k and must be installed first!

    I put t know not in what order you have installed the driver but this ACPI support Toshiba common modules must be installed at the beginning!

  • Respond to create/customize a toolbar in Windows 7 (replaces the quick launch for Windows XP)

    After several hours, with many MS research and research on google to try to get the famous and beautiful Quick Launch Toolbar that no longer exists in Windows 7, I thought it after 3 hours.  Here's how:

    Create a toolbar

    -----------------------

    1. create a folder on your system

    2. right click on the taskbar, select toolbar, select the new toolbar

    3. new toolbar - select displays a file dialog box

    4. Select the folder created in step 1-based

    Customize the toolbar

    -------------------------------

    1. right click on the taskbar

    2. click on bar tasks unlock

    3. right click on the new toolbar

    4. menu popup appears

    5. click on title of show (allows the user to hide the name of the toolbar, which is of the Deb Toolbar)

    6. right click again on new toolbar

    7. click on the text (allows to hide the name of the icon, IE.) Microsoft Office Word 2007)

    8. right-click again on new toolbar

    9. click on view (allows the user to change the size of the icons on the toolbar)

    10 lock the toolbar

    When I spent many hours and kept getting the Quick Launch bar does not exist in this version, it is true; HOWEVER, you can get everything too close with a custom toolbar.  No answer came close to telling how to customize a toolbar, but only how to create a toolbar.  Originally, I had posted a question, but then found an answer and thought that after having no chance he is on this site that I post the answer.

    So I hope this helps anyone who has upgraded to Windows 7 missing and are looking for this bar Quick Launch bar.  This is the closest you're going to get.

    No more frustrated.  NOTE TO MICROSOFT: The search engine provided by MS, you stick with your terminology.  I can't tell you how many times I reformulated my search with your terminolog and kept getting "taskbar" vs "toolbar."  The most I could get it is how to create a toolbar, and that's all.  Then you wonder why users get frustrated and I want to just throw it out the window (no pun intended - perhaps although YES).

    Deb

    Thanks for the tip!

    Easy to find...

    Google:
    where is the Quick Launch bar in "Windows 7".
    http://www.Google.com/search?q=where+is+the+Quick+Launch+bar+in+%22Windows+7%22

    Bing:
    where is the Quick Launch bar in "Windows 7".
    http://www.bing.com/search?q=where+is+the+Quick+Launch+bar+in+%22Windows+7%22

    Yahoo:
    where is the Quick Launch bar in "Windows 7".
    http://search.Yahoo.com/search;p=where+is+the+Quick+Launch+bar+in+%22Windows+7%22

    My favorite hit:
    Guided Help: enable quick launch in Windows 7
    http://support.Microsoft.com/kb/975784
    (Last revised: September 27, 2009)

    * NOTE* - Windows help improved, don't get me wrong.  However, it will be * never * compare to the billions of people who make thousands of billions of pages and trillions of positions and with the help of a search engine designed to explore and index it to find what you need in probably the words that you will use (because they probably * like you * and do not know all the terms fancy some geek came up with many years ago.)  ;-)

  • AT & T changed their design of the homepage, and I liked the old one. A way to create my own homepage in Firefox using modules for content that I prefer?

    AT & T changed their design of the homepage, and I liked the old one. A way to create my own homepage in Firefox using modules for content that I prefer? I liked the modules which gave me a variety of sources of news, finance, sports, weather, calendar, etc... It also allowed me to use a background of my own source. Finally, he allowed me to resize the modules I needed. I would like to be able to replace the new AT & T with my own homepage. Thank you.

    Maybe http://www.netvibes.com/

  • No need for common Modules for A60

    I have an A60 - 180 (PSA60E) satellite. Samewone know where I can find common Modules for Toshiba ACPI (TVALD), because I've lost everythink of them and now I try to get back, but I don't know how.
    Be patient with my English.
    Thanks everywone can help me!

    Hello Viorel

    You can install the original Microsoft OS on your device. All Toshiba drivers you need, you can find the Toshiba site.
    Visit this link: http://eu.computers.toshiba-europe.com

    I m not 100% sure, but I think that you don t need the common Modules of your module, as there is not on the Web site.
    In addition if you want to buy an original recovery CD utility, contact the service partner.

    Good bye

  • No need for common modules for Satellite U400 with Win XP

    Hi everibody!

    I'm looking for Toshiba common Modules for Windows XP for Satellite U400-218 PSU44E. Spent a lot of time without results.
    In seeking, fell on wire 55356.

    In his post (July 31, 2010) * Xardas * gave the order of installation for Windows XP and one of the items on the list was "TOSHIBA common Modules.
    This makes me think that everyone (at least * Xardas *) can point to the source of prorper to download the desired file or, if it is already impossible, directly this file send me.

    Thanks in advance!

    Check section driver Toshiba on the European driver page and there is no common Modules available for one of the U400 series.

    Question; Why do you need this tool?

  • Is it possible to add the MiniPCI WLAN Module for Satellite Pro 4300?

    Hello

    I got a 4300 Satellite Pro and I want to add a WLAN MiniPCI Module. Is this possible and is someone able to provide details where to add this module for example some technical documentation in images.

    Greetings
    Florian

    Robin is right about the upgrade. It is not possible. in my opinion the best solution for you is to use a PCMCIA WLAN card.

  • Satellite A300D - where can I find common modules for XP?

    I got my 300 d satellite with no model no PSAK4E for Windows XP earlier. The only problem is that I can't install the energy saver. The message error «a fatal error has occutred, code 0 x 2» I discovered that this has something to do with the common modules, which I do not think that I have installed.

    However, the problem is that I can't find the common Modules on drivers Toshiba's Web site. Is there another name for the common modules, or are they simply not there?

    I want to reinstall Windows in order to install the common modules first. However, it is a little difficult without this having the installation package. I already tried to do some research on the subject but can't find the right information on my model. I found a few 3rd party software but I don't know if it's a good idea.

    Could someone help me, or indicate where I can find the common modules for my model?

    Hello

    The common Modules are not available for models A300D.
    Person not A300D series needs this module.

    But I found some other Power Saver for Satellite A300D series.
    I chose to ve on the Toshiba European pilot page this:
    -> Satellite A satellite-> Satellite A300D-> all-> Win XP.

    Now, I see two energy saving; 7.04.02.Q and v 7.04.02 v

    Check both

    Before install you it, delete the old version, clean the operating system using the CCleaner, reboot the laptop and try to install once again.

  • Re: HARD drive need internal and business BT internal module for Satellite P300-156

    where can I buy HDD case internal and internal module for Satellite P300-156 BT?

    Try an authorized Service Center. There is a list on the Toshiba under Support site

  • Bluetooth Modul for Tecra M1

    Hello
    I bought a bluetooth module for my Tecra M1 laptop. Maybe can someone explain where I have to place this module inside the laptop? Thanks for your help, Roland

    Hello

    Unfortunately I've never updated the notebook with a module Bluetooth internal and I m not 100% if it is possible, especially on this laptop.
    I have always used a USB Bluetooth stick and/or a PCMCIA Bluetooth card.

  • Is there an internal Bluetooth module for Satellite A300?

    I bought a laptop toshiba Satellite A300, it does not contain a bluetooth module.
    There are several types of modules bluetooth USB, but I don't think they are as practical as the interns.

    If Toshiba does not include internal bluetooth module for Toshiba Satellite A300?

    I know that for the Satellite * Pro * A300, which has the same shape, but is a business model, it is bluetooth module when you buy. Their modules should be compatible with my laptop. But how can I get a?

    : D Akuma asked the model number! Then maybe you should post it instead of the xxx-xxxx ;)

    Generally, it should be possible to upgrade the laptop with internal BT module but as told by Akuma, the laptop must contain the BT antenna in fog you can find it under the keyboard (Brown wire).

    But note; These updates can be done only by the technician of the ASP, because if you remove any parts for your laptop, would cancel you the warranty.

  • How to query the object module for the interface of the module interface specific, I need

    Hello.

    Currently using LabVIEW TestStand/2012 2012.

    I am looking to change the sequence of LabVIEW text translator, and in the CreateStep.vi I am trying to create a step of type WIS_Sequence_Call (a customized version of NI_Types.ini--> SequenceCall).

    I need set the file path, name and step sequence parameter values.  I think I need to access the SequenceCallModule class to do this.

    This will help the States of SequenceCallModule in the description of the file: "To access the properties and methods of a specific module class, ask the object Module for the specific module interface interface, you want to acquire".

    What, exactly, is "request" here?  It looks to "Clarify" might be what I'm after, but I want that result programmatically, IE no dialog box.

    See my excerpt below.

    Thank you.

    Use the connectivity-> ActiveX--> consider Variant. Define the type of SequenceCallModule, giving the interface as input Module. You must close the interfaces of the Module and the SequenceCallModule when you are finished with them.

    What he does is to call QueryInterface on the entry. The COM Module object implements the interfaces of the Module and the SequenceCallModule in this case to use.

    Hope this helps,

    -Doug

  • Quick Menu for Canon PIXMA MX452 software

    Whenever I click on the program of Quick Menu for the product in question, I get the following error message:

    Quick menu Canon stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.

    I've uninstalled and reinstalled the driver and software Quick Menu several times, both the disk and online downloads.

    I turned off my anti-anti-virus/firewall program and also said the security program the program of Canon is a trusted application.

    I am able to print/scan/copy, but not on the Quick Menu, which is more convenient.

    Help, please.

    Hi clarkdjensen,

    There may be a third scanner driver interferes with the Quick Menu.  Please, try the following:

    1. click on 'Start' and then on 'computer '.

    2. in the left pane, click the arrow next to the record Local (c).

    3. click on the arrow next to Windows to open the folder

    4. highlight the twain_32 folder.

    5. the folder should have 2 folders that begin with PIXMA MX452 and a file called wiatwain.ds.  Other folders or files must be moved to the office.

    6. restart the computer and try to scan the image.

  • PowerShell module for 8.6

    Someone at - he tested the module 8.5 powershell works with 8.6, otherwise it will take 6 months as with 8.5 to get a working version?

    Wow they just released it!

    en.Community.Dell.com/.../PowerShell-module-for-Wyse-vWorkspace-8-6

  • CSCtu30620 - missing validation of entries for specific code functions

    Hi all experts of the ASA

    Please tell me!

    What is DDT?

    CSCtu30620 - missing validation of entries for specific code functions

    I try to get the tool to search for bugs, but no information.

    Kind regards.

    Motorcycle

    Hi motorcycle,

    Bugs search currently shows the speaker note support for this bug.

    https://Tools.Cisco.com/bugsearch/bug/ CSCtu30620

    The bug was introduced proactively to implement control of the limits on a function in the code base that has been discovered to be missed.

    Sincerely,

    David.

Maybe you are looking for