Missing a closing parenthesis in the creation of these paintings

Similar Questions

• ORA-00907 is missing a closing parenthesis in the value

  Hi all
  
  I am writing code for a table, the value type, but is ORA-00907 missing right parenthesis at the opening of the LOV in the window to submit competing demand.
  The internal code of the defined value is as follows:
  
  Table:_ gl_ledgers_public_all_v gl, gl_ledgers lg, gl_ledger_configurations lc
  
  Columns in the table:_
  Value: gl.name
  ID: gl.ledger_id
  
  Où :_

  WHERE gl.ledger_id = lg.ledger_id 
        AND lg.configuration_id = lc.configuration_id 
        AND :$FLEX$.FND_MO_REPORTING_LEVEL='1000'
  UNION ALL
  SELECT name, organization_id
     FROM hr_operating_units
     WHERE :$FLEX$.FND_MO_REPORTING_LEVEL='3000'

  Where FND_MO_REPORTING_LEVEL is a value which returns Char and is used by a previous setting.
  
  I looked around for the triggers of this error (misuse apostrophes, questions of subquery...) but nothing in my case. Can someone check to see what could be the cause of this error? Thanks in advance.

  Oops!
  It looks like we can't use UNION / GROUP BY / SEEN in value sets' where clause article, as it implecitly by adding parentheses.
  Of http://docs.oracle.com/cd/A60725_05/pdf/flex.pdf

  Special treatment for WHERE the Clauses
  Behind the scenes, the flexfield adds one and... clause in the WHERE clause that you set for your table validated set of values.
  If your WHERE clause contains a RC, then the seal in the annex AND clause may not apply to your WHERE clause integer (without the brackets).
  and could not get the desired result.
  Then, flexfields put implicitly parentheses around your WHERE clause.

  http://docs.Oracle.com/CD/A60725_05/HTML/comnls/us/FND/fndffm03.htm

  Of http://docs.oracle.com/cd/E18727_01/doc.121/e12892/T354897T361276.htm
  You can create a view with the UNION and use it in the set of values.
  (Or) you will need to have an internal selection in the field of the table itself.

  By
  VAMSi

• Node Firmula is missing a closing parenthesis

  The code following the formula node

  If (Res == 'Full')
  {
  MS1 = 0;
  MS2 = 0;
  McStep = 1;
  }

  Generates this error.

  Error on line 1 is marked by a character ' # ': "if (Res == # 'Full') {MS1 = 0;".   M '.

  RES is a digital Cntrol with the properties of the Enum.

  It is not obvious to me why this code produces a right parenthesis miiising error. What does take to eliminate this error?

  Howard

  Is not to complain about this parenthesis, it is complaing to "Full".  You need to compare the number.  Of course, you could code in LabVIEW instead of a node thus forumla.

• is missing a closing parenthesis in create materialized view statement

  Hi, I am using oracle 10g R2 and try to create a view of materalized with the following statement:

  CREATE MATERIALIZED VIEW MVT_DEC_TAB USING INDEX REFRESH FAST ON COMMIT AS 
  select i.rowid as ind_rowid,c.rowid as indc_rowid,r.rowid as r_rowid,b.rowid as b_rowid,brk.rowid as brk_rowid,
  i.name,i.sname,i.address,i.tel,i.fax,i.email,
  DECODE(c.BRKNO,null,0,1) AS DEC_BRK,
  TO_TIMESTAMP(NVL(VEKDOV,'2001/01/01')||' 12:00:00','YYYY/MM/DD HH:MI:SS'),
  DECODE(c.brkno,null,DECODE(c.ncmpcode,null,c.vekdov,b.bcarddov),brk.validitydov)
  from indiv i,indivcoding c
  LEFT OUTER JOIN BROKER brk ON brk.brkno = c.brkno
  LEFT OUTER JOIN CORPORAT r
  ON c.ncmpcode=r.cmpcode INNER JOIN BCARD b ON b.bcardno=r.bcardno
  where c.typeact=2  
  and c.natcode=i.natcode
  and c.brkno is not null or c.ncmpcode is not null or c.nnatcode is not null

  but I get an error message:
  where c.typeact = 2
  ERROR on line 11:
  ORA-00907: lack of right parenthesis
  
  which makes no sense because if I run the sql code of the materialized view, it runs normally.
  I need to know what the causing this can someone help?

  Do not use the "LEFT OUTER JOIN" ANSI syntax in your CREATE MATERIALIZED VIEW definition.
  Specify

  FROM indiv i,indivcoding c, broker brk, corporat r
  WHERE brk.brkno(+) = c.brkno
  AND c.ncmpcode(+) = r.cmpcode
  

  OR

  FROM indiv i,indivcoding c, broker brk, corporat r
  WHERE c.brkno = brk.brkno(+)
  AND r.ncmpcode = c.cmpcode(+)
  

  (I find it more readable).

  Hemant K Collette

• After the creation of these character styles, apply clear replacements...

  Hello world

  After you import the Word document into InDesign CS3 in some paragraphs, there are some substitutions of style. InDesign formatting styles are not correctly designed with paragraphs. Even if that word styles are mapped with InDesign styles exactly. If I select all paragrahs and click on the 'Clear the replacements' option in the palette paragraph styles, all InDesign formatting styles are applied correctly, but the character style formatting are removed. So I planned to create the script for each font style character style and each formatting characters. After doing this I can clear overrides paragraph hassle styles. I have created the script to create styles for characters and formatting his job very well, but when I tried to run this script for the 2nd time in the same document that it showing an error inside. Please find below my script and it is too large,

  ------------------------------------------------------------------------------------------ -------------------

  To find the police and setting styles in form and its replacement by styles of characters
  Script for CS3

  inDesign #target
  myDoc var = app.activeDocument;
  If (myDoc.characterStyles.item ("Itl") == null) {}
  var Itl = myDoc.characterStyles.add ({name: "Itl", fontStyle: "Italic"}) ;}
  If (myDoc.characterStyles.item ("bl") == null) {}
  BL var = myDoc.characterStyles.add ({name: "bl", fontStyle: "Bold"}) ;}
  If (myDoc.characterStyles.item ("bItl") == null) {}
  bItl var = myDoc.characterStyles.add ({name: "bItl", fontStyle: "BoldItalic"}) ;}
  If (myDoc.characterStyles.item ("bItal") == null) {}
  Bollet var = myDoc.characterStyles.add ({name: "bItal" fontStyle: "Bold Italic"}) ;}
  If (myDoc.characterStyles.item ("sb") == null) {}
  SB var = myDoc.characterStyles.add ({name: "sb", fontStyle: "Semibold"}) ;}
  If (myDoc.characterStyles.item ("sbItal") == null) {}
  var sbItal = myDoc.characterStyles.add ({name: "sbItal", fontStyle: "Semibold Italic"}) ;}
  If (myDoc.characterStyles.item ("blk") == null) {}
  BLK var = myDoc.characterStyles.add ({name: "blk", fontStyle: "Black"}) ;}
  If (myDoc.characterStyles.item ("obl") == null) {}
  OBL var = myDoc.characterStyles.add ({name: 'obl', fontStyle: "Oblique"}) ;}
  If (myDoc.characterStyles.item ("li") == null) {}
  Li var = myDoc.characterStyles.add ({name: "li", fontStyle: "Light"}) ;}
  If (myDoc.characterStyles.item ("liItal") == null) {}
  var liItal = myDoc.characterStyles.add ({name: "liItal", fontStyle: "Light Italic"}) ;}
  If (myDoc.characterStyles.item ("sup") == null) {}
  var sub = myDoc.characterStyles.add ({name: "sup", position: Position.superscript}) ;}
  If (myDoc.characterStyles.item ("sub") == null) {}
  void var = myDoc.characterStyles.add ({name: "sub", position: Position.subscript}) ;}

  app.findTextPreferences = NothingEnum.nothing;
  app.changeTextPreferences = NothingEnum.nothing;

  app.findTextPreferences = null;
  app.changeTextPreferences = null;

  app.findTextPreferences.fontStyle = "italic";
  app.changeTextPreferences.appliedCharacterStyle = Itl;
  App.Documents.Item (0) .changeText ();
  app.findTextPreferences.fontStyle = "Bold";
  app.changeTextPreferences.appliedCharacterStyle = bl;
  App.Documents.Item (0) .changeText ();
  app.findTextPreferences.fontStyle = "BoldItalic";
  app.changeTextPreferences.appliedCharacterStyle = bItl;
  App.Documents.Item (0) .changeText ();
  app.findTextPreferences.fontStyle = "Bold Italic";
  bItal = app.changeTextPreferences.appliedCharacterStyle;
  App.Documents.Item (0) .changeText ();
  app.findTextPreferences.fontStyle = "Semibold";
  app.changeTextPreferences.appliedCharacterStyle = sb;
  App.Documents.Item (0) .changeText ();
  app.findTextPreferences.fontStyle = "Semibold Italic";
  app.changeTextPreferences.appliedCharacterStyle = sbItal;
  App.Documents.Item (0) .changeText ();
  app.findTextPreferences.fontStyle = 'Black ';
  app.changeTextPreferences.appliedCharacterStyle = blk;
  App.Documents.Item (0) .changeText ();
  app.findTextPreferences.fontStyle = "Oblique";
  app.changeTextPreferences.appliedCharacterStyle = obl;
  App.Documents.Item (0) .changeText ();
  App.Documents.Item (0) .changeText ();
  app.findTextPreferences.fontStyle = "light";
  app.changeTextPreferences.appliedCharacterStyle = li;
  App.Documents.Item (0) .changeText ();
  app.findTextPreferences.fontStyle = "Light Italic";
  app.changeTextPreferences.appliedCharacterStyle = liItal;

  app.findTextPreferences = NothingEnum.nothing;
  app.changeTextPreferences = NothingEnum.nothing;

  app.findTextPreferences.position = Position.superscript;
  app.changeTextPreferences.appliedCharacterStyle = sup;
  App.Documents.Item (0) .changeText ();
  app.findTextPreferences.position = Position.subscript;
  app.changeTextPreferences.appliedCharacterStyle = sub;
  App.Documents.Item (0) .changeText ();

  function setupFindText (find, change, PT, hidLayers, lockedLayers, lockedStories, masters caseSensitive) {}
  app.findTextPreferences = null;
  app.changeTextPreferences = null;
  try {app.findTextPreferences.findWhat = find} catch (e) {};
  try {app.changeTextPreferences.changeTo = change} catch (e) {};
  app.findChangeTextOptions.properties = {}
  includeFootnotes: (PT == null? false: PT).
  includeHiddenLayers: (hidLayers == null? false: hidLayers).
  includeLockedLayersForFind: (lockedLayers == null? false: lockedLayers).
  includeLockedStoriesForFind: (lockedStories == null? false: lockedStories).
  includeMasterPages: (masters == null? false: Masters).
  includeCaseSensitive: (caseSensitive == null? false: caseSensitive)
  }
  } / / end setupFindText
  Alert ("DONE");

  ------------------------------------------------------------------------------------------ -------------------

  Please suggest how simply this script and make it run faster that anyone can suggest me. Also suggest me how can add this "Clear Override" syntax with this script. I want to make this very effective script. Thanks in advance to all.

  Concerning

  Indana

  Enough basic syntax, really.

  First, as indicated in the documentation, the argument is optional; Second, its default behavior is "All". You get 'all', because you have not provided any argument, and you expected something else. Apparently, you want to clear the formatting only. Just use

  myStory[j].clearOverrides(OverrideType.PARAGRAPH_ONLY);
  

  Notice that the documentation indicates the return type of this function is zero; This means that you get no return value, and it is of no use to "store" the result in a variable myOvClr.

• GREP style - apply character style to the opening and closing parentheses surrounding a 0 (but not 0)

  Hello

  I'm relatively new to GREP style and will have to put in shape about 600 postcards containing various data (via the merger of data), including phone numbers. Consider the following data set:

  1. + 44 (0) 123467800

  2 (©) copyright

  3. (name of the program)

  I want to tell Indesign to stagger the opening and the closing parenthesis of the baseline (with a character style), but only the bracket that include a 0 and, possibly, without affecting the 0 value between them.

  Seems like an easy task, but it is impossible to find a solution. Could someone help?

  Thank you very much

  Antonio

  

• Escape the open and closed parenthesis characters

  I'm close to finishing a script that could find - at the end of a graf - text in brackets and throw on top of the graf.

  However, when there is text between parenthesis in the middle of the graf, I have problems with a negative lookahead.   I can't get GREP jump spent "(example of text between brackets)" in the middle of the graf. "

  Example of problem:

  Here is the text of example of what I want to accomplish.  Notice that it has (example of text in brackets) in the middle of the graf.  It also has the text at the end of the graf in parens I want to capture. (xxxxx/xxxxx xxxxxx)

  Example of Solution:

  XXXXX/xxxxx xxxxxx

  Here is the text of example of what I want to accomplish.  Notice that it has (example of text in brackets) in the middle of the graf.  It also has the text at the end of the graf in parens I want to capture.

  If the closing parenthesis is the last thing in your paragraph, you can use (------([^ ()] +?-)) $

• How to prevent the creation of 15000 files for 300 MB each day Firefox

  Firefox creates files of 'file' in C:\Users\LeRicain\AppData\Local\Mozilla\Firefox\Profiles\dnm04rk5.default\cache2
  There are about 10,000 and 20,000 files I have to remove to get about 300 MB of space each day

  How to prevent the creation of these files in Firefox

  Here are the files from cache. Basically, it takes Web sites that access you a lot and records bits of them so they'll load faster the next time you visit them. FOR EXAMPLE if you visit Google.com much, Firefox will save some elements of this page in the cache so that the next time visit you Google.com, it will not have to re - download.

• FrameMaker 10 - is there a way to search for missing, either open or closed parentheses?

  Is there a way to FrameMaker 10 seeking a missing opening or a closing parenthesis?

  Should I do a search for each opening parenthesis and see if there is a closing parenthesis?

  Then repeat the search for a closing parenthesis see if there is an open parenthesis?

  Is this the only way?

  Cut using intelligent quote of the spell checker:

  If the document does not double quotes...
  Edition > find/replace:
  Change all (to"
  (Change All) to.

  Those are typing quotes.
  Edition > check spelling:
  In all cases with the 'chain', click on [OK]
  On all instances with 'string, type (string) and click [OK].
  Edition > find/replace:
  Change all-')
  Change all------' to)

  Those are on the left and right of the double quotes.

  Yes, you have to hit every instance, but it will be click-to-continue except incompatibility.

• Reissue of links a file to an article 'an error occurred during the creation of the article. Missing the capital inflow. »

  Someone had this problem?

  I can't find in any other discussion.

  "An error occurred during the creation of the article. Missing the capital inflow. »

  Sometimes when I create a link to a new file in an article. Folio Builder tries to update the file and he paused by the message.

  It just stays there, and it won't let me cancel the update or do anything else.

  Sound familiar?

  Please, let me know.

  Thank you!

  In most cases, this error message is caused by one or more broken links to the assets of overlays. Select different overlay images in your document and look for a yellow triangle in the overlays Panel.

• Hi, me - Joshua, using Mozilla Version 38.0.1, please share the information of the creation of tab double... Thank you.

  Hi, me - Joshua, using Mozilla Version 38.0.1, please share the information of the creation of tab double... Thank you.

  Hello!

  https://support.Mozilla.org/en-us/questions/762043

  This solution should help you

  "

     Ctrl-click or middle-click the Reload button to open the current page in a new tab.
     Ctrl-click or middle-click items in the history of the Back and Forward buttons to open a page from that list in a new tab.
     Duplicate a tab with its history by pressing CTRL and dragging the tab to a new position on the tab bar.
     Dragging a tab in the browser window will detach the tab and move it to a new window, this is called tab tearing.
     Drag a tab back to the tab bar in the original or anther window to undo a detach or move a tab to a specific window. If a window gets empty (you tear off the last tab) then that window will be closed automatically. "
  

• How to re - activate the functions 'Restore previous Session', "Recently closed tabs" and "Recently closed Windows" in the menu of history?

  For some time, four choices in the restore section (tabs of other devices, Previous Session Restore recently closed tabs and recently closed Windows) have been shaded. Keyboard shortcuts do not work, and didn't undo closed tab in the context menu of the tab.

  I found and tried various patches to do this, including:

  • From Firefox in Mode safe without addons.
  • Firefox reset.
  • Change the values of browser.sessionstore.max_tabs_undo and browser.sessionstore.max_windows_undo in all: config.
  • Check to see if I have a user.js in profile Firefox. (I don't).
  • Verify that the private browsing is not the default mode. (It is not).
  • Create a profile to see if it had the same problem. (He did.)
  • Running anti-malware analysis. (BitDefender and SpyBot).
  • Temporarily disable my anti-virus and anti-malware.

  Any of these solve my problems.

  Other devices tab is grayed out, but I've never used, and it might have previously grayed out.

  The story works in general. Sites I visit are added to the log.

  Preferences are saved correctly when I change them.

  Any advice on how to solve the problem would be much appreciated, as I am very fond of these features and often served until they stopped working.

  ADDITIVE

  After that looking through the list of preferences of change created by the resolution of the problems, I tried now also reset the following text:

  • browser.places.smartBookmarksVersion
  • browser.newtabpage.storageVersion
  • Browser.cache.Disk.Capacity
  • Browser.cache.Disk.smart_size.first_run
  • Browser.cache.Disk.smart_size.use_old_max
  • Browser.cache.Disk.smart_size_cached_value

  The problem persists.

  I finally managed to understand this. In searching the Web, I found a thread detailing a similar problem on the Mozillazine forum. The problem has been identified as a missing browser.sessionstore.enabled set, so I went looking in Subject: config and couldn't find it. After creating the entry, by assigning the value true and restart Firefox, the functions of recovery/recently started working again. Apparently, some bookmark plugins and session-based can cause this problem, but in my case, it must have been something else, that I never had no such plug-ins installed.

  If you have this problem, here's a detailed itinerary of the way I fixed it. Whereas there seems to be several problems that can cause restore/recently functions to stop working, it is not a guaranteed fix, but it is still a thing to try, at least.

  1. Open a new tab or window.
  2. Type of topic: config address in the box and press ENTER.
  3. Read reviews and promise to be careful.
  4. Copy this: browser.sessionstore.enabled - and paste in Subject: config'search box in s. press ENTER.
  5. If you copied the text at the top right, the setting should appear in the list. If it is not the case, you have the same problem, I did. (I would say that you copy/paste the text indicated and only this text before moving on to double check).
  6. If the parameter does not exist, right click on the parameters of the list and choose new-> Boolean. Paste the parameter name that you copied previously in the name box, click OK and then set the Boolean true. Once you have click OK, restart Firefox, and (hopefully) things should work properly again.

  Thanks to everyone who offered help and thoughts!

• We live errors in the creation of recovery media. Please try again

  Hello

  I bought the windows 8 hp pavilion series laptop and tried to create the recovery with blank disc DVD - R disc.

  While burning data first drive the HP Recovery Manager application up the pop-up message like "we live errors in the creation of recovery media. Please try again' with the OK key.

  Press the button Ok app closed automatically once.

  Model laptap

  HP Pavilion n003tx-15 Notebook PC (Windows 8)

  Please someone help me.

  Thanks in advance

  Concerning

  Trehout

  Have you tried to burn in Mode safe?

  http://support.HP.com/us-en/document/c03481733

• Problem with XNET start VI after the creation of sessions

  I have a timed loop sending CAN messages via XNET screws. It works great, but I always lose the very first message. It matters little, I send the first message immediately after you create the XNET session or after a few milliseconds.

  The attached screenshot shows the initialization of my four sessions XNET. Although I am starting before the session with an XNET start VI, there is without success to get the first message.

  It seems that the sessions/CAN (selectable cards and HS CAN) interfaces are initialized only after the first call to write XNET. XNET write seems to imply XNET start (see documentation), but the appellant XNET start manually after the creation of sessions does not help.

  What I'm missing to get the interfaces online and ready before you send anything?

  I was able to solve this problem because they did not actually XNET screw sorry for this post.

• PDM-files: is it possible to prevent the creation of files .tdms_index of LabVIEW and tiara?

  Hello

  is it possible to prevent the creation of .tdms_index files when opening/creating/editing of LabVIEW and tiara a .tdms file?

  I think that I have no advantage in the .tdms_index files, because our applications create many small .tdms-files (repeated measures). With .tdms_index files, we have unnecessary memory consumption and it takes longer for Windows Open the containing folder. Also it s confused when you search for a certain file.

  Best regards

  Daniel

  Hi Acer,

  I'm afraid there is a direct way to disable the creation of file .tdms_index now of LabVIEW and tiara. You can use the API Advacend TDMS in LabVIEW, which does not create an index file, or you can just do a simple programming and remove the .tdms_index file after closing the PDM file.

  This is a request for a long time, we will consider adding this feature for TDMS in future versions.

  Ye Yongqing

  OR R & D