Missing dates in panel FTP of Dreamweaver

Similar Questions

• Point cloud with missing data and 3 sets of data

  Hello

  I'm doing a scatter diagram that has 3 sets of data in it (i.e. 3 plots on the same graph), except that 2 of my sets of data have a missing value while my third set has all the values. I end up getting 2 lines that are disconnected. I can't just remove the line containing the missing data for the 2 sets of data because since my category axis is time, my data points get shifted and no longer appear at the right time. This is the chart that I have.

  

  Thank you.

  Hi Gabrielle,.

  If there is a diagram of dispersion, the x axis is a value axis. If you have auto selected for the min and max values on this axis, the scale may change when you remove the data point, 15, 85, but the rest remains in the same position relative to the values on each axis of ordinates. What change will be , however, is the curve on which 15 85 approached a local y maximum.

  Scatterplots will always leave a gap in the line/curve of connection where there are a pair of missing data. There are two ways to close the gap.

  If the chart is an essentially linear relationship, you can use a calculated value is pair up with the lack of value x. The downside of this is that the representation of this point will be indistinguishable on the map of the other data points, measured.

  A better way would be to make two tables, one with the full data set, the other with the partial sets, but with the pair missing completely removed.

  Adjust the cards the same size and have the same scales on each axis, then just remove one of the cards except the data points, the curves connecting the data points, the x axis of ordinates and the legend showing the color and the forms used to plot each series.

  Give a graphic a transparent filling and place it in front of the other.

  Kind regards

  Barry

• variable sharing, missing data, the timestamp even for two consecutively given

  Hello

  I have a problem with missing data when I read a published network shared variable.

  Host VI:

  In a host of VI on my laptop (HP with Windows XP Prof.) I write data to the shared Variable 'data '. Between two consecutively write operations is a minimum milliseconds of wait time. I use it because I want to make sure that the time stamp of each new value of data is different then a preview (variables shared the resolution is 1 ms)

  VI target:

  the VI target cRIO-9012 bed only of new data in the way that it compares the timestamp of a new value with the time stamp of the last value on a device in real time.

  Problem:

  rarely, I'm missing a data point (sometimes everything works fine for several hours, transfer thousands of data correctly above all of a sudden failure occurs). With a workaround, I'm able to catch the missing data. I discovered that the missing data have the timestamp exactly the same, then the last point of data read, is so ignored in my data 'legal '.

  To summarize, the missed value is written to the variable shared host, but ignores the target because its timestamp is wrong, respectively the same as the last value, despite the host waits for a minimum of 10 milliseconds each time before writing a new value.

  Note:

  The shared Variable is hosted on the laptop and configured using buffering.

  The example is simple only to display the function of principle, in real time, I also use a handshake and I guarantee that there is no sub - positive and negative.

  Simplified example:

  

  

  Question:

  Anyone has an idea why two consecutively data can have the same timestamp?

  Where timestamping (evil) Finally comes (System?)?

  What would be a possible solution (for the moment with shared Variables)?

  -> I tried to work around the problem with the clusters where each data gets a unique ID. It works but it is slower that comparing the timestamps and I could get performance problems.

  It would change anything when I animate the shared on the RT System Variable?

  Thanks for your help

  Concerning

  Reto

  

  This problem has been resolved in LabVIEW 2010.  You can see other bugs corrections in theReadme of LabVIEW 2010.

• Missing data calendar after MS update

  This morning, I went to check my calendar in the Palm Desktop 6.2.2 and almost everything was missing. Apparently, an update of MS ran all night.

  In my Palm OS Desktop/username/calendar folder, I see a big (1408KO) file called datebook.bak and another called DateBook.mdb.bak (1464 KB) one who would contain my missing data?

  My last Coop diary is dated 10/08/09 and I wouldn't lose all my data from this date.

  Unfortunately, the restoration of data from my Palm TX is not an option.

  I am running Vista as the underlying operating system.

  Any ideas on the recovery of my lost calendar are appreciated.

  Hello

  The DateBook.mdb.bak file that you found contain your appointments before last successful hotsync. It would be important that hotsync not you your PDA or the bak file would have overwritten with the contents of the Agenda you see in Palm Desktop right now.

  I suggest that you undergo these:

  1. Create a new user name in Palm Desktop.
  2. While in the module calendar in the new user name, click file > import.
  3. Navigate to the location of the bak file.
  4. Type * (asterisk) in the 'filename' box and press ENTER. This should indicate the contents of the directory that the bak file.
  5. Now, double-click the bak said to import it.
  6. If you're lucky, you should see your lost appointments.

  If you're unlucky ignore the following steps:

  1. Now, are you sure that the bak file really contains your lost diary, near Palm Desktop.
  2. Using windows Explorer, navigate to your username folder. Usually, it's \Documents\Palm OS Desktop\ [a derivative of your hotsync username]
  3. Rename the folder "Calendar" to something else.
  4. Open Palm Desktop and be in your correct username and in the calendar module name.
  5. Now you can import the bak file in the folder of the Agenda that had renamed you in step 3.
  6. Now you can hotsync TX, but remember that the conduct of the Agenda is set to DESKTOP REPLACED the HANDHELD computer.
  Message edited by wacre on 10/16/2009 06:35

• I had to reinstall XP Pro operating system. After installation do not play the HD ADECK. Tried to reinstall, but kept on getting vital missing data. Reinstall again.

  I am running XP Pro.  What respect should be reinstalled from the CD.   After the reinstallation, Harmon Kardon speakers do not work because HD ADECK cannot be properly installed.  Kept on getting vital missing data?

  Any suggestions?  Someone else's experiences loss of sound after a re - install?

  I guess you have formatted the HD?

  Therefore, you need to reinstall the relevant software for HD ADECK

  See here:

  http://www.Google.fr/search?q=HD+ADECK&ie=UTF-8&OE=UTF-8&AQ=t&RLS=org.Mozilla: en - GB:official & client = firefox-a

  Happy trawling,
  Jerry

• Icon missing in Control Panel Accessibility Options

  I needed to change a setting in the Accessibility Options, but found that the icon is missing from Control Panel. I found the file access.cpl in C:\Windows\ServicePackFiles\i386 folder. How to restore the icon in Control Panel? Thank you!

  Copy the CPL file to the C:\Windows\System32 folder. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Get missing dates as lines

  WITH T1
       AS (SELECT 'A' ITEM,
                  'L' LOC,
                  TO_DATE ('01-MAR-15', 'DD-MON-RR') EFF,
                  TO_DATE ('08-Mar-15', 'DD-MON-RR') DISC
             FROM DUAL
           UNION ALL
           SELECT 'A' ITEM,
                  'L' LOC,
                  TO_DATE ('15-MAR-15', 'DD-MON-RR') EFF,
                  TO_DATE ('31-Mar-15', 'DD-MON-RR') DISC
             FROM DUAL
           UNION ALL
           SELECT 'A1' ITEM,
                  'L1' LOC,
                  TO_DATE ('15-MAR-15', 'DD-MON-RR') EFF,
                  TO_DATE ('04-APR-15', 'DD-MON-RR') DISC
             FROM DUAL
           UNION ALL
           SELECT 'A1' ITEM,
                  'L1' LOC,
                  TO_DATE ('23-APR-15', 'DD-MON-RR') EFF,
                  TO_DATE ('24-APR-15', 'DD-MON-RR') DISC
             FROM DUAL
           UNION ALL
           SELECT 'A1' ITEM,
                  'L1' LOC,
                  TO_DATE ('05-MAY-15', 'DD-MON-RR') EFF,
                  TO_DATE ('04-JUL-15', 'DD-MON-RR') DISC
             FROM DUAL)
  SELECT T1.*
    FROM T1;
  

  Current output:

  

  For section A and L Loc-> I need missing dates between 01 and 08 March and 15 March 2015 and 31 March 2015 I need another line 07th March and 14 March 2015

  Expected results

  Header 1	Header 2	Header 3	Header 4
  A	L	01/03/2015	08/03/2015
  A	L	09/03/2015	14/03/2015
  A	L	15/03/2015	31/03/2015
  A1	L1	15/03/2015	04/04/2015
  A1	L1	05/04/2015	22/04/2015
  A1	L1	23/04/2015	24/04/2015
  A1	L1	25/04/2015	04/05/2015
  A1	L1	05/05/2015	04/07/2015

  I tried to use under request, but need to know how can I get new row.

  WITH T1
       AS (SELECT 'A' ITEM,
                  'L' LOC,
                  TO_DATE ('01-MAR-15', 'DD-MON-RR') EFF,
                  TO_DATE ('08-Mar-15', 'DD-MON-RR') DISC
             FROM DUAL
           UNION ALL
           SELECT 'A' ITEM,
                  'L' LOC,
                  TO_DATE ('15-MAR-15', 'DD-MON-RR') EFF,
                  TO_DATE ('31-Mar-15', 'DD-MON-RR') DISC
             FROM DUAL
           UNION ALL
           SELECT 'A1' ITEM,
                  'L1' LOC,
                  TO_DATE ('15-MAR-15', 'DD-MON-RR') EFF,
                  TO_DATE ('04-APR-15', 'DD-MON-RR') DISC
             FROM DUAL
           UNION ALL
           SELECT 'A1' ITEM,
                  'L1' LOC,
                  TO_DATE ('23-APR-15', 'DD-MON-RR') EFF,
                  TO_DATE ('24-APR-15', 'DD-MON-RR') DISC
             FROM DUAL
           UNION ALL
           SELECT 'A1' ITEM,
                  'L1' LOC,
                  TO_DATE ('05-MAY-15', 'DD-MON-RR') EFF,
                  TO_DATE ('04-JUL-15', 'DD-MON-RR') DISC
             FROM DUAL)
  SELECT T1.*,
         NVL (
              LAG (DISC) OVER (PARTITION BY ITEM, LOC ORDER BY ITEM, LOC, EFF)
            - 1,
            EFF)
            NEW_EFF,
         NVL (
            LAG (EFF) OVER (PARTITION BY ITEM, LOC ORDER BY ITEM, LOC, EFF) - 1,
            DISC)
            NEW_DISC
    FROM T1;
  

  Hello

  You can use UNION to combine the new lines that you generate using LAG or LEAD to actually the rows in the table:

  WITH new_rows AS

  (

  SELECT the point AS header1

  loc AS tete2

  Disc + 1 AS header3

  , ADVANCE (FEP) OVER (PARTITION BY point, loc

  ORDER BY eff

  ) - 1 AS header4

  FROM t1

  )

  SELECT *.

  OF new_rows

  WHERE header3<>

  UNION ALL

  SELECT the element, loc, eff, disc

  FROM t1

  --

  ORDER BY 1, 2, 3

  ;

  In any analytical function, there is never any point of order by the same expression that DIVIDE you BY.

• Fill in the missing dates with level

  Think im a bad thing. I have some data that missing dates (days) and I want to just fill in the missing days with 0

  This sql is to look right or I'm doing something wrong:

  SELECT H.URL, H.V_DT, NVL CNT (P.CNT, 0))

  SELECT CAL. URL, CAL. MIN_DATE + LEVEL AS V_DT OF)

  SELECT the url, MIN (D) MIN_DATE, max (D) MAX_DATE

  USER_LOG_TMP2_VW where the url is not null and current_url (select distinct URL of USER_LOG_TMP_VW)

  GROUP BY URL

  After MAX (D) > MIN (D)) CAL

  CONNECT IN CAL. MIN_DATE + LEVEL < CAL. MAX_DATE

  -GROUP BY URL, CAL. MIN_DATE + level

  ): LEFT JOIN USER_LOG_TMP2_VW P ON P.URL = H.URL AND F.F. = H.V_DT

  There are only about 75 unique URL and when I run the present it works but I can't count because there are so many lines when it should be, perhaps a few thousand. the oldest date of min goes back only a few months.

  im getting strange results. As if I add a specific url like this (below)... it works perfectly for this url. But when I go out as above where it captures all urls... it gives me weird super results. As the dates twice for duplicate URLS.

  SELECT H.URL, H.V_DT, NVL CNT (P.CNT, 0))

  SELECT CAL. URL, CAL. MIN_DATE + LEVEL AS V_DT OF)

  SELECT the url, MIN (D) MIN_DATE, max (D) MAX_DATE

  OF USER_LOG_TMP2_VW, where url is not null and current_url to (select url from USER_LOG_TMP_VW where url = 'http://testing123.com/test/test"")

  GROUP BY URL

  After MAX (D) > MIN (D)) CAL

  CONNECT IN CAL. MIN_DATE + LEVEL < CAL. MAX_DATE

  -GROUP BY URL, CAL. MIN_DATE + level

  ): LEFT JOIN USER_LOG_TMP2_VW P ON P.URL = H.URL AND F.F. = H.V_DT

  I was not post create it for the views with her but I think that maybe im just something wrong with the level.

  I tried the group according to the level of url cal.min_date +, but for some reason it just keeps running and the query never ends.

  Hello

  Depending on your needs and your version, you may want a CONNECT BY clause like this:

  CONNECT BY LEVEL< max_date="" +="" 1="" -="">

  AND PRIOR url = url

  AND PRIOR SYS_GUID () IS NOT NULL

• Download a new site FTP of Muse on the former site of the FTP of Dreamweaver

  I'm downloading a new site FTP of Muse on the former site of the FTP of Dreamweaver. It downloads fine, but the old pages of HTML in Dreamweaver are still on the site. Although not visible in a browser they are always picked up by the search engines. How can I go about removing the old HTML Dreamweaver pages?

  Just upload another like FileZilla FTP client and manage the site.

  Mylenium

• Dashbord CPU, RAM, disk, Perf missing data Net

  I'm starting a new Capacity planner. Dashboard monitor-> show missing data, there is no data with CPU, RAM, disks, pref. Net on systems with Performance data (please see attachment file), but a data collector VMware capacity Planer 2.8 has collectd it. How do I troubleshoot it? Thank you

  I would recommend that you go to the '1. Put tab in place' and change the date range for the project.  I can see your username that you are Thai and generally the data send to Thailand would contain 255 x years (thai year) instead of 201 x.

• Missing dates

  Dear all,
  I need query to find the missing dates between two columns in a given month.
  
  
  CREATE TABLE emp_shift)
  EmpNo number 4,
  fr_date DATE,
  TO_DATE DATE,
  Maj VARCHAR2 (1));
  
  CREATE TABLE emp)
  EmpNo number 4
  );
  
  INSERT INTO emp
  (empno
  )
  VALUES (7369
  );
  
  INSERT INTO emp
  (empno
  )
  VALUES (7499
  );
  
  INSERT INTO emp
  (empno
  )
  VALUES (7521
  );
  
  INSERT INTO emp
  (empno
  )
  VALUES (7788
  );
  
  INSERT INTO emp_shift
  (empno, fr_date, TO_DATE, Maj
  )
  VALUES (7369, '01 - sep - 12', ' 08-sep-12', 'A')
  );
  
  INSERT INTO emp_shift
  (empno, fr_date, TO_DATE, Maj
  )
  VALUES (7369, '09 - sep - 12', 15-sep-12', 'B')
  );
  INSERT INTO emp_shift
  (empno, fr_date, TO_DATE, Maj
  )
  VALUES (7369, 16-sep-12 ', 22-sep-12', 'A')
  );
  INSERT INTO emp_shift
  (empno, fr_date, TO_DATE, Maj
  )
  VALUES (7369, 23-sep-12 ', 30-sep-12', 'B')
  );
  
  INSERT INTO emp_shift
  (empno, fr_date, TO_DATE, Maj
  )
  VALUES (7499, '01 - sep - 12', ' 08-sep-12', 'A')
  );
  commit;
  
  
  MISSING_DATES EMPNO
  ---------------------- ----------
  09 SEP-12 TO 11-SEP-12-7499
  23 SEP-12 TO 26-SEP-12 7499
  01 sep-12-7521 30-SEP-12
  01 12-sep-to 30-SEP-12 7788
  
  SQL > select * from emp_shift;
  
  EMPNO FR_DATE TO_DATE S
  ---------- --------- --------- -
  7369 08-SEPT-12 TO 01-SEP-12
  7369 15-SEP-12 B 09-SEP-12
  7369 22-SEP-12 TO 16-SEP-12
  7369 30-SEP-12 B 23-SEP-12
  7499 08-SEPT-12 TO 01-SEP-12
  7499 15-SEP-12 B 12-AUG-12
  7499 22-SEP-12 TO 16-SEP-12
  7499 30-SEP-12 B 27-SEP-12
  
  
  As we can see that there is no missing date against empno 7369 so it is displayed in the output and empno 7499 is missing dates from 09-Sept-12 to 11 - sep-12 and 23-26-sep-12 sep-12.
  7521 Empnos and 7788 has no entry in the table of emp_shift where these empno dates do not appear in the 01-sep-12 and 30-sep12
  
  Please help to solve.

  As...

  SQL> select * from emp1 order by 1;
  
       EMPNO
  ----------
        7369
        7499
        7521
        7788
  
  SQL> select * from emp_shift order by 1,2;
  
       EMPNO FR_DATE   TO_DATE   S
  ---------- --------- --------- -
        7369 01-SEP-12 08-SEP-12 A
        7369 09-SEP-12 15-SEP-12 B
        7369 16-SEP-12 22-SEP-12 A
        7369 23-SEP-12 30-SEP-12 B
        7499 01-SEP-12 08-SEP-12 A
        7499 15-SEP-12 28-SEP-12 A
        7521 08-SEP-12 15-SEP-12 A
  
  7 rows selected.
  
  SQL> with t as
    2  (select to_date('01092012','ddmmyyyy')+level-1 dt
    3   from dual
    4   connect by to_date('01092012','ddmmyyyy')+level-1 <= to_date('30092012','ddmmyyyy')
    5   )
    6  select empno,min(dt) fr_date,max(dt) to_date
    7  from(
    8    select empno,dt,sum(diff) over(partition by empno order by dt) sm
    9    from(
   10      select e1.empno,dt,
   11             dt-nvl(lag(dt)
   12                  over(partition by e1.empno order by dt),
   13                    to_date('010912','ddmmyy')-1)-1 diff
   14      from emp1 e1,t
   15      where not exists
   16    (Select null
   17     from emp_shift e2
   18     where t.dt between e2.fr_date and e2.to_date
   19     and e1.empno = e2.empno)
   20     )
   21      )
   22  group by empno,sm
   23  order by 1,2;
  
       EMPNO FR_DATE   TO_DATE
  ---------- --------- ---------
        7499 09-SEP-12 14-SEP-12
        7499 29-SEP-12 30-SEP-12
        7521 01-SEP-12 07-SEP-12
        7521 16-SEP-12 30-SEP-12
        7788 01-SEP-12 30-SEP-12
  

  Published by: JAC Sep 27, 2012 12:23

  table name used is EMP1.
  A few lines are added to emp_shift for the test

• 9.2 CC InDesign crashes when you open the data merge Panel

  I have a document that is in a book (for multiple files) with cross-references to other documents in the book. I also almost all of the content in an inCopy assignment in order to manage in multiple versions/layouts with the same content. All references are separated InCopy as page numbers vary from book to book.

  That said, so that other documents in the work of book very well, this one is having issues. Whenever I try to view the data merge Panel, it crashes. I had a similar problem with other files where if I try to select a merge data source it would break. I've solved the problem of the registration of a copy, the deletion of all pages of the document, by selecting the data merge source (who now works with any content on the pages), and then copy and paste the content on the pages back. Not sure why this works, but it did.

  The problem is that I tried the same solution on this document and it worked until I tried to click on the data merge Panel after you follow these steps, inDesign crashes. If I open the data merge Panel, THEN open the document, it crashes as well.

  I'll try to redo this with panel data fusion open while I copy and paste content back in and see if I can refine the problematic content if that is the question.

  Other documents are open so that they are accessible?

• ORA-19612: datafile 0 not restored because of missing data

  Hello
  
  I'm testing a restoration of the controlfile. The database is in archivelog mode and automatic backup is defined on IT. I did successfully a full backup and backup of database copy.
  
  To test I did the following:
  -Note the DBID
  -closing of the database
  
  -Rename the two controlfiles:
  $ mv /u02/rcat/control01.ctl /u02/rcat/control01.ctl_old
  $ mv /u02/fra/rcat/control02.ctl /u02/fra/rcat/control02.ctl_old
  
  
  When I try to restore the controlfile autobackup form I get the following error. What could be reason please?
  
  

  [rcat@oel54]$ rman target /
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 10 00:07:41 2010
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: RCAT (not mounted)
  
  RMAN> set dbid 502889862;
  
  executing command: SET DBID
  
  RMAN> restore controlfile from autobackup;
  
  Starting restore at 10-DEC-10
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=19 device type=DISK
  
  recovery area destination: /u02/fra
  database name (or database unique name) used for search: RCAT
  channel ORA_DISK_1: AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp found in the recovery area
  channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101210
  channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101209
  channel ORA_DISK_1: restoring control file from AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of restore command at 12/10/2010 00:09:55
  ORA-19870: error while restoring backup piece /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
  ORA-19612: datafile 0 not restored due to missing data
  
  $ ll /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
  -rw-r----- 1 oracle dba 10354688 Dec  9 23:44 /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp

  Thank you!

  ORA-19612: datafile 0 not restored because of missing data

  lack of data---> file may damaged from backup sets...
  so try to take backup once more and then restore.

  In addition, you must give
  RMAN > list backup of controlfile; comes from the target database not new database...

  Thank you

• Missing dates in the table

  Hello
  
  I have a table that could have a record for the day with the sale of information, but for some reason, there are missing dates, is it somehow I could find the witch dates are missing.
  
  Example table:
  
  Sales_Date | value
  2010-01-01 | 20
  2010 01-02 | 30
  04-01-2010 | 40
  
  The output of the query by the example above could only return the missing date (2010-01-03).
  
  Thanks in advance

  Might be a way

  SQL> with t as
    2  (
    3  select to_date('2010-01-01','YYYY-MM-DD') sales_date, 20 val from dual union all
    4  select to_date('2010-01-02','YYYY-MM-DD'),30 from dual union all
    5  select to_date('2010-01-04','YYYY-MM-DD'),30 from dual union all
    6  select to_date('2010-01-06','YYYY-MM-DD'),30 from dual union all
    7  select to_date('2010-01-07','YYYY-MM-DD'),30 from dual union all
    8  select to_date('2010-01-12','YYYY-MM-DD'),40 from dual
    9  )
   10  select (select min(sales_date) from t)+ level-1  dt from dual
   11  connect by level <= (select max(sales_date) - min(sales_date) from t)+1
   12  minus
   13  select sales_date from t order by 1
   14  ;
  
  DT
  -----------
  1/3/2010
  1/5/2010
  1/8/2010
  1/9/2010
  1/10/2010
  1/11/2010
  
  6 rows selected
  
  SQL> 
  

• Creating a copy of the base data missing data UNDO files

  I need to create a copy of a database 11G on a windows server (using a script to create controlfile with database set = "database_name") from a cold backup that was taken at the time, but the backup lacks 2 3 of the UNDO tablespace data files.
  
  There is a lot of advice to suggest that setting undo_management = 'MANUAL' a database can be restarted and the missing data files dropped (and recreated)... However, I don't know if it is a solution that works in the context of rename the database by using create controlfile method
  
  does anyone know if the parameter undo_management = 'MANUAL' is all I have to do? or is it more...
  
  any suggestion would be received with gratitude...

  Dear patrichards,

  Your quite welcome. I am pleased that you have solved your problem.

  Kind regards.

  Ogan