Dashbord CPU, RAM, disk, Perf missing data Net

Similar Questions

• Missing data - Performance: CPU, RAM, disk, Net

  Hi, I would ask how to fix Capacity Planner not displaying no not Performace data on dashboard. Check the data of the "missing" view, Performance for the CPU, Ram Disk and Net are marked 'X '.

  Thanks in advance.

  Please see attached file...

  According to the screen shots data were collected only tree days yet. If I'm mistaken for reports display performance data, a minimum (not sure how many days) of collected performance data. Maybe there is something in the documentation!

  André

• How can I get the Guest VM CPU, Ram, disk of VMware Tools?

  Hey guys,.

  I have a question for the information of the guest OS,

  I can use the SDK to get information such as the disk i/o of vCenter,

  But I can't the CPU, Ram, disk use on the comments operating system?

  I know vmware tools can help, but I don't know how to use the web Service to obtain, please do me a favor!

  Thank you

  To get the disk usage information in the guest operating system, you get "guest.disk" property of the managed object VirtualMachine. This will give you the total capacity and free space on each disk information.

  http://www.VMware.com/support/developer/VC-SDK/visdk41pubs/ApiReference/Vim.VM.GuestInfo.DISKINFO.html

  For the processor and memory, you can extract the properties "summary.quickStats.overallCpuUsage" and "summary.quickStats.guestMemoryUsage" of the managed object VirtualMachine.

  http://www.VMware.com/support/developer/VC-SDK/visdk41pubs/ApiReference/Vim.VM.summary.QuickStats.html

  I hope this helps!

  Neha

• Deleted virtual disk file and data store, just want to boot OS now.

  So I had a VM win7, and I added a virtual disk on a new data store.

  The new drive came out fine on windows as a new drive, and I was able to format etc.

  Now I basically unplugged all the system and booted Linux instead of ESX and ran all over the disk on which was my data store.

  Then I started in vmware and saw that the Windows VM was in a State of 'suspended' and if I try to take it back, he complains the missing disk file.

  "

  Reason: The system cannot find the specified file.
  Cannot open disk ' / vmfs/volumes/504e6c8a-b20d8bfd-1768-001e674dda97/win7/win7_1.vmdk' or one of the snapshot disks it depends on.
  VMware ESX can not find the virtual disk "/ vmfs/volumes/504e6c8a-b20d8bfd-1768-001e674dda97/win7/win7_1.vmdk". Check that the path is valid and try again.

  "

  But it does not successfully. I tried to change the settings to remove the ' disk hard 2 "of its devices, but which is disabled since I assume that the virtual machine is suspended."»

  I don't like on the virtual disk or any data on this subject, I have need to be in windows - I want to just start in

  Is it possible to get out of this State without having to remove the entire virtual machine and re - install windows?

  Thank you!

  > and started instead of ESX Linux and ran all over the disk on which was my data store.

  Sorry - that "ran the disk" mean exactly?

  to get rid of the suspended state - delete the VMS, as well as all the VMS file references in the vmx file

• ORA-19612: datafile 0 not restored because of missing data

  Hello
  
  I'm testing a restoration of the controlfile. The database is in archivelog mode and automatic backup is defined on IT. I did successfully a full backup and backup of database copy.
  
  To test I did the following:
  -Note the DBID
  -closing of the database
  
  -Rename the two controlfiles:
  $ mv /u02/rcat/control01.ctl /u02/rcat/control01.ctl_old
  $ mv /u02/fra/rcat/control02.ctl /u02/fra/rcat/control02.ctl_old
  
  
  When I try to restore the controlfile autobackup form I get the following error. What could be reason please?
  
  

  [rcat@oel54]$ rman target /
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 10 00:07:41 2010
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: RCAT (not mounted)
  
  RMAN> set dbid 502889862;
  
  executing command: SET DBID
  
  RMAN> restore controlfile from autobackup;
  
  Starting restore at 10-DEC-10
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=19 device type=DISK
  
  recovery area destination: /u02/fra
  database name (or database unique name) used for search: RCAT
  channel ORA_DISK_1: AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp found in the recovery area
  channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101210
  channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101209
  channel ORA_DISK_1: restoring control file from AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of restore command at 12/10/2010 00:09:55
  ORA-19870: error while restoring backup piece /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
  ORA-19612: datafile 0 not restored due to missing data
  
  $ ll /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
  -rw-r----- 1 oracle dba 10354688 Dec  9 23:44 /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp

  Thank you!

  ORA-19612: datafile 0 not restored because of missing data

  lack of data---> file may damaged from backup sets...
  so try to take backup once more and then restore.

  In addition, you must give
  RMAN > list backup of controlfile; comes from the target database not new database...

  Thank you

• Point cloud with missing data and 3 sets of data

  Hello

  I'm doing a scatter diagram that has 3 sets of data in it (i.e. 3 plots on the same graph), except that 2 of my sets of data have a missing value while my third set has all the values. I end up getting 2 lines that are disconnected. I can't just remove the line containing the missing data for the 2 sets of data because since my category axis is time, my data points get shifted and no longer appear at the right time. This is the chart that I have.

  

  Thank you.

  Hi Gabrielle,.

  If there is a diagram of dispersion, the x axis is a value axis. If you have auto selected for the min and max values on this axis, the scale may change when you remove the data point, 15, 85, but the rest remains in the same position relative to the values on each axis of ordinates. What change will be , however, is the curve on which 15 85 approached a local y maximum.

  Scatterplots will always leave a gap in the line/curve of connection where there are a pair of missing data. There are two ways to close the gap.

  If the chart is an essentially linear relationship, you can use a calculated value is pair up with the lack of value x. The downside of this is that the representation of this point will be indistinguishable on the map of the other data points, measured.

  A better way would be to make two tables, one with the full data set, the other with the partial sets, but with the pair missing completely removed.

  Adjust the cards the same size and have the same scales on each axis, then just remove one of the cards except the data points, the curves connecting the data points, the x axis of ordinates and the legend showing the color and the forms used to plot each series.

  Give a graphic a transparent filling and place it in front of the other.

  Kind regards

  Barry

• I get this error message, the backup disk image "/ Volumes/data-1/jackmatz of Air.sparsebundle of MacBook ' could not be found (error (null)).

  Hey get this error message

  The backup disk image "/ Volumes/data-1/jackmatz of Air.sparsebundle of MacBook ' could not be found (error (null)).

  In the context of what?

• The backup disk image ' / Volumes/Data/iMac.sparsebundle ' could not be found (error (null))

  Hello

  I have a 27-inch iMac late 2013, 3.2 Ghz intel Core i5, 8 GB 1600 Mhz DDR3. I get the tracking error when you try to save it on my time capsule.

  The backup disk image ' / Volumes/Data/iMac.sparsebundle ' could not be found (error (null))

  I have another iMac and Mac Pro that save in the capsule of time without any problem.

  Can anyone help?

  Thank you

  You try Time Capsule stop and unplug for 1 minute. Then reset the SMC on the iMac by Intel iMac LANDAU and SMC will reset and restart the iMac and restart the TC and retest Time Machine.

• variable sharing, missing data, the timestamp even for two consecutively given

  Hello

  I have a problem with missing data when I read a published network shared variable.

  Host VI:

  In a host of VI on my laptop (HP with Windows XP Prof.) I write data to the shared Variable 'data '. Between two consecutively write operations is a minimum milliseconds of wait time. I use it because I want to make sure that the time stamp of each new value of data is different then a preview (variables shared the resolution is 1 ms)

  VI target:

  the VI target cRIO-9012 bed only of new data in the way that it compares the timestamp of a new value with the time stamp of the last value on a device in real time.

  Problem:

  rarely, I'm missing a data point (sometimes everything works fine for several hours, transfer thousands of data correctly above all of a sudden failure occurs). With a workaround, I'm able to catch the missing data. I discovered that the missing data have the timestamp exactly the same, then the last point of data read, is so ignored in my data 'legal '.

  To summarize, the missed value is written to the variable shared host, but ignores the target because its timestamp is wrong, respectively the same as the last value, despite the host waits for a minimum of 10 milliseconds each time before writing a new value.

  Note:

  The shared Variable is hosted on the laptop and configured using buffering.

  The example is simple only to display the function of principle, in real time, I also use a handshake and I guarantee that there is no sub - positive and negative.

  Simplified example:

  

  

  Question:

  Anyone has an idea why two consecutively data can have the same timestamp?

  Where timestamping (evil) Finally comes (System?)?

  What would be a possible solution (for the moment with shared Variables)?

  -> I tried to work around the problem with the clusters where each data gets a unique ID. It works but it is slower that comparing the timestamps and I could get performance problems.

  It would change anything when I animate the shared on the RT System Variable?

  Thanks for your help

  Concerning

  Reto

  

  This problem has been resolved in LabVIEW 2010.  You can see other bugs corrections in theReadme of LabVIEW 2010.

• Missing data calendar after MS update

  This morning, I went to check my calendar in the Palm Desktop 6.2.2 and almost everything was missing. Apparently, an update of MS ran all night.

  In my Palm OS Desktop/username/calendar folder, I see a big (1408KO) file called datebook.bak and another called DateBook.mdb.bak (1464 KB) one who would contain my missing data?

  My last Coop diary is dated 10/08/09 and I wouldn't lose all my data from this date.

  Unfortunately, the restoration of data from my Palm TX is not an option.

  I am running Vista as the underlying operating system.

  Any ideas on the recovery of my lost calendar are appreciated.

  Hello

  The DateBook.mdb.bak file that you found contain your appointments before last successful hotsync. It would be important that hotsync not you your PDA or the bak file would have overwritten with the contents of the Agenda you see in Palm Desktop right now.

  I suggest that you undergo these:

  1. Create a new user name in Palm Desktop.
  2. While in the module calendar in the new user name, click file > import.
  3. Navigate to the location of the bak file.
  4. Type * (asterisk) in the 'filename' box and press ENTER. This should indicate the contents of the directory that the bak file.
  5. Now, double-click the bak said to import it.
  6. If you're lucky, you should see your lost appointments.

  If you're unlucky ignore the following steps:

  1. Now, are you sure that the bak file really contains your lost diary, near Palm Desktop.
  2. Using windows Explorer, navigate to your username folder. Usually, it's \Documents\Palm OS Desktop\ [a derivative of your hotsync username]
  3. Rename the folder "Calendar" to something else.
  4. Open Palm Desktop and be in your correct username and in the calendar module name.
  5. Now you can import the bak file in the folder of the Agenda that had renamed you in step 3.
  6. Now you can hotsync TX, but remember that the conduct of the Agenda is set to DESKTOP REPLACED the HANDHELD computer.
  Message edited by wacre on 10/16/2009 06:35

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• RAM disk: is - this practice?

  By ram drive running the operating system on the ram, I mean.  With memory prices so incredibly cheap and fast ram so abundant, it seems now is a better time then ever to do so.  I thought that I could save my OS and load it to memory prior to each session.  Currently I use about 6 GB for the C drive because I loaded all possible programs on another drive.  Many people use 16 GB of ram and when it costs only about $5 per GB, sound very tempting.  1600 mhz DDR3 is very powerful, quick and cheap now.  You can use a small SSD for all your program files or just a standard Sata 7200 RPM.

  A virtual machine, you could easily test because you can put the virtual drive on the RAM disk and run the drive from there to test. I'm thinking now that it has been proposed.

  If your motherboard 1155 can take a 32 GB of RAM, then go ahead. Some will work with him, some will not. Some are limited to 16 GB (motherboard, chipset/OS no limit). Windows XP 64 or Windows 7 64 would work.
  Paging file, temporary files, etc. work well in a RAM drive. But, running more than RAM instead of a paging file works better (to a point, of course). With enough RAM, the swap file is rarely used, but required for some programs. With enough RAM, it wouldn't matter where he was.
  XP 64 is great. As long as all your drivers and things are compatible. Windows 7 on the same hardware with lots of RAM would actually probably faster. I noticed that 7 has some improvements that make it faster than XP with recent material and more RAM.
  I don't know how OSX works, but it is based on BSD, so I think that it would benefit from a RAM drive using the /swap partition.
  Current SSDS are no faster than the RAM, but they have more space (and it's still there when you stop). An operating system on a RAM disk is not really practical. Restart the updates, driver install, etc. would be necessary and after the reboot you lose install updates, so you're still stuck with a default value.
  I'm sure that someone has tried to put a Win7 installation on a RAM disk, a Google search can show you. You could probably try and make a picture for your PC with all drivers and updates and put this image on the Ramdisk to see what it looks like, but I wouldn't do it right now for a production or facility for anything other than messing around to try out it.

• I had to reinstall XP Pro operating system. After installation do not play the HD ADECK. Tried to reinstall, but kept on getting vital missing data. Reinstall again.

  I am running XP Pro.  What respect should be reinstalled from the CD.   After the reinstallation, Harmon Kardon speakers do not work because HD ADECK cannot be properly installed.  Kept on getting vital missing data?

  Any suggestions?  Someone else's experiences loss of sound after a re - install?

  I guess you have formatted the HD?

  Therefore, you need to reinstall the relevant software for HD ADECK

  See here:

  http://www.Google.fr/search?q=HD+ADECK&ie=UTF-8&OE=UTF-8&AQ=t&RLS=org.Mozilla: en - GB:official & client = firefox-a

  Happy trawling,
  Jerry

• Can I change CPU, RAM AND graphics in HP Commpac D220?

  Hello! Thanks to the time to read this topic, I have a question on my hp compac D220 pc so I hope you will tell me the answer!
  IM runing windows 7 now and try to install windows 8.1 but IE NX unsupported. So I decided to change my processor and the extra ram of 1 GB ad, and the new graphics card but I don't know that the graphics card & CPU (last) support my pc.
  Here is my pc in detail.
  1.80 ghz, 180 GB HARD drive and 1 GB of ram, motherboard AMIBOIS, Windows 7 running. So suggest
  me that I buy a new pc or
  change cpu, ram and graphics card.

  Hello

  As it is an OEM machine, you will not be able to replace the CPU this processor is specifically compatible with OEM motherboard. If you are looking to change the CPU, RAM and GPU, you really can both do you a favor and buy a new machine all together, or build your own.

  Kind regards

  Patrick

• new GPU CPU RAM Motherborad everything on windows 7 wont boot in to windows at all when I turn on the screen of my power light then goes right (windows error)

  new GPU CPU RAM Motherborad everything on windows 7 does not start in Windows at all when I turn my power on the screen on then turn past directly to (windows error) I hit normal windows startup then goes to blue screen I tried safe mode, safe mode with netowrking, last know good configuretions and it stil goes to blue screen and again once it restarts please help fix this problem some

  Here's my Spece if necessary
  OS-Windows 7 Home Premium 64-bit
  Intel Core i5 processor 3570 k @ 3.40 ghz
  RAM-8 GB
  Graphics Card-MSI Nvidia Geforce 660 TI 2Go ECA
  Motherborad-H77MA G43 (Gen3)
  PSU - XFX Pro 750W Brozne Edition (Real Gamers Easy Rail)
  Hurricane box-Cyberpower (Black ATX) side Pancel Galss with blue lights)
  Monitor-LG W2340 HD 1920 x 1080 60 hz (DVI - D)
  Keyboard-Xtreme Gear (large buttons)
  Mouse-Xtreme Gear
  Here is ok all my spece pc I hope who help im going to call MSI and Cyberpower on this problem also if needed

  If win is an oem version supplied preinstalled on the PC, its coastline to the origonal material.

  If this is a start of commercial version full victory since the win dvd and see if a repair install works