Missing location tab in the display properties file

Similar Questions

• The Desktop tab in the display properties freezes computer

  I have Windows XP, SP3. When I try to change the wallpaper by clicking on the Office tab lock. Nothing happens. If I try to close the display properties, I get a message saying that he does not, with RunDLL32.exe in the title bar. The other tabs in display properties work fine. I've run several virus and malware detection programs and they found nothing. No idea what's happening, and how can I solve this problem?

  I had the same problem. Finally I started to think: why did this happen? I searched the registry for "Wallpaper" and maybe one of the proposed mentions it's a timeout to 20000 in relationship with the module property of the wallpaper (which units I don't know), so I left the display properties > Desktop tab in the State "suspended" over lunch. When I came back to it the destop by bike through the regular options (so you can choose one of them). I then went through and find my own picture of a hummingbird bird, and it works fine now. Without doubt, I deleted the picture bird Hummingbird long ago and had forgotten this is the desktop wallpaper.

  I hope this helps.

  Patrick Montgomery

• Additional tabs are missing from the display properties

  original title: display problems (broken display properties window)

  Well, I have a truckload of display problems, many of them are probably related, but I will address these one at a time. I'll start with my display properties.

  When I open the display properties, I get this little window:

  http://img.Photobucket.com/albums/V371/battousaiofnphiles/screencaps/BrokenControlpanel1.jpg

  Look at it carefully, it is supposed to look like this:

  http://img.Photobucket.com/albums/V371/battousaiofnphiles/screencaps/BrokenControlpanel2.jpg

  Now, whenever I start the computer I have to reinstall my display driver and reset my display properties. When you reset my 600x800px at 1440 x 900 screen, I have to select one click on the theme 'Apply' before I give myself the tabs to set different individual elements of the screen and click 'Apply' to effectively apply my desired settings.

  Now I have a Vid card for replacement in the mail which I think should solve the forced back on the display driver, but I'm confident that's not going to solve the problem of display properties broke.

  * EDIT *.
  I'm running on Windows XP Professional SP3.

  Original question is resolved. I open a prompt of commands and regsvr32 /i shell32 then restarted and enter regsvr32 themeui. My gfx card is always failing to start, but once started, the tabs are back where they belong.

• Remote Desktop area is missing the 'Remote' tab in the System Properties dialog box window?

  Remote Desktop area is missing the 'Remote' tab in the System Properties dialog box window? I can not set up or add users. Remote assistance is the ONLY settings and options that I see. It is a brand new OEM Vista Home Premium X 64 installation with all updates (SP2). That's the problem since it was first started.

  I'm sorry, but it is not possible to access Vista Home Premium via Remote Desktop.  To do this, you need Vista Business or Vista Ultimate.

• Location of the environment properties file

  Hi all
  
  I am a beginner and I have a question about the property file...
  
  What would be the best location for the environment.properties file? We are looking at two places field House and House of bea, which one would be the best option.
  
  Add entries in the environment.properties file, we need to restart the field or just redeploy application would pickup the changes?
  .
  Thank you
  Win

  Hello

  ** is the best place to put your properties files. No need to restart your server after you change these files if your application reads the files properties as mentioned below.

  It is also another good Option to add the property file situation including the Filename in the setDomainEnv.sh script CLASSPATH property. (but in this case it may restart the server if you want to change something in the file properties)

  I tested it and it works with charm...
  After you have placed any property inside the "root of the field" file (example :) directory can be read without restarting the server... I tried the following after placing "a.properties" within the root of the domain... Even I changed the values in the file property 2 to 3 times and each time it is reflected in my JSP as *(No need to restart the Servers) *.

  * "a.Properties" *.
  City = New York (SpiderMan City)
  country = America

  * "index.jsp". *
  <%@ page import="java.util.*" %>
  
  
  
  
  
  

  
  < %="">< br="">InputStream is = new FileInputStream (". / a.properties"); < br=""> Properties prop = new Properties (); < br=""> prop.load (East); < br=""> out.println ("City:"+ prop.getProperty ("City") "); < br=""> out.println ("country:"+ prop.getProperty ("country") "); < br=""> %>
  
  
  

  .
  .
  Thank you
  Jay SenSharma
  http://WebLogic-wonders.com/WebLogic (WebLogic wonders are here)

• What is the function of support biredirectional activate the tab of the printer properties ports?

  What is the function of support biredirectional activate the tab of the printer properties ports?

  Back in the day, the printers were an output device only when the computer would simply send your print job to the printer and it would print (or not).  Now printers 'reply' to your computer and notify you levels of ink and toner low, paper jams, termination of success/failure, etc.    Enable bidirectional support allows the printer to 'reply' to your computer.

  HTH,
  JW

• How can I change the menus of fonts, size of the items listed in the display properties (and others)

  I went through all the font size changes allowed in this menu and none of this changes the font size of the words on and in the display properties it auto box.  Win XP SP3

  Hi JohnAlaska,

  If necessary, change on the computer before see you the change? Have you installed new hardware, software or updates? Given that this problem occurred a few says ago, System Restore can help to restore the settings.

• Agent 4.0.2 "Unable to locate one of the following binary files" on Linux

  Hello
  
  I have two servers that I'm watching with Hyperic. I had the agent 3.2.x on their job very well. However, when I try to run the 4.0.2 agent, I get an error message whenever I have try to launch HQ - agent.sh.  No idea why?
  
  bin #./hq-agent.sh start
  Cannot locate one of the following binary files:
  root/Hyperic-HQ-agent-4.0.2/Wrapper/sbin/... /... Wrapper/sbin/Wrapper-Linux-Intel (r) xeon (tm) cpu2.40ghz - 32
  root/Hyperic-HQ-agent-4.0.2/Wrapper/sbin/... /... Wrapper/sbin/Wrapper-Linux-Intel (r) xeon (tm) 64 - cpu2.40ghz
  root/Hyperic-HQ-agent-4.0.2/Wrapper/sbin/... /... / Wrapper/sbin/Wrapper
  
  The files needed seem to be in packaging/sbin /.  The contents of this directory on my server is:
  
  sbin # ls-l
  2368 total
  -rwxr-xr-x 1 root root 281540 18 Dec 18:42 wrapper-aix-ppc-32
  -rwxr-xr-x 1 root root 319397 18 Dec 18:42 wrapper-aix-ppc-64
  -rwxr-xr-x 1 root root 88703 18 Dec 18:42 wrapper-freebsd - x 86-32
  -rwxr-xr-x 1 root root 176380 18 Dec 18:43 wrapper-hpux-parisc-32
  -rwxr-xr-x 1 root root 253808 18 Dec 18:43 wrapper-hpux-parisc-64
  -rwxr-xr-x 1 root root 140198 18 Dec 18:42 wrapper-linux-ppc-64
  -rwxr-xr-x 1 root root 99401 18 Dec 18:42 wrapper-linux - x 86-32
  -rwxr-xr-x 1 root root 111027 18 Dec 18:42 wrapper-linux - x 86-64
  -rwxr-xr-x 1 root root 114052 18 Dec 18:42 wrapper-macosx-ppc-32
  -rwxr-xr-x 1 root root 233604 18 Dec 18:43 wrapper-Mac OS x-universal-32
  -rwxr-xr-x 1 root root 112536 18 Dec 18:43 wrapper-solaris-sparc-32
  -rwxr-xr-x 1 root root 148512 18 Dec 18:43 wrapper-solaris-sparc-64
  -rwxr-xr-x 1 root root 110992 18 Dec 18:43 wrapper-solaris - x 86-32
  -rwxr-xr-x 1 root root 204800 18 Dec 18:42 wrapper-windows - x 86 - 32.exe
  
  BTW: I am on 32-bit linux 2.6.17 kernel.
  
  Thank you
  Brian

  HQ - agent.sh first is just a script. It actually run bundles/agent-4.0.0-EE-889/bin/hq-agent.sh script.

  I believe you can manually set the DIST_ARCH parameter to account for your system architecture.

  DIST_ARCH ='uname Pei 2 >/dev/null | TR [: upper:] [: lower:] | "TR-d [: white:]"

  it change something like

  DIST_ARCH = x86_32 (not sure what you have)

• Evaluation of XML Namespace by using the java properties file

  Hi all
  
  In my java class, I get the XML as a string. I am convert this string to xml. So in order to evaluate the xpath expression, I'm able to evaluate the xpath expression by using the namespace prefix and the namespace url as key / value in my properties file. It has worked well.
  
  
  But my project is that,
  
  I can receive different xmls with different sets of namespaces. For each xml namespace prefix and url wil set. While I can keep track of a set of namespace prefix and url for each xml.
  
  The problem here is that
  XML_A is to have its own prefix - ns1 pointing to 'http://orders.com/purchase', ns2, pointing to "http://orders.com/invoice".
  
  XML_B is to have its own prefix - ns1 pointing to 'http://sales.com/stock', ns2, pointing to "http://sales.com/item" - I mean same ns1 and ns2
  
  
  Kindly tell me, it's possible in the file build.properties, to bring together the key pair / value. while I have not lead to any conflict, of having the URL of the different namespace
  for the same key "ns1."
  
  ns1 = http://orders.com/purchase
  
  
  ns1 = http://sales.com/stock
  
  
  I want the above two lines occur in the same file build.properties. Also, when using MapObj.get ("ns1") - (where MapObj will see the values of keys to the build.properties file.)
  I want to differentiate the ns1 under certain conditions (xml_name in my case).
  
  Here for the prefix, I have no other don't be concat something to make a difference like A_ns1 and B_ns2. This will create problems. So kindly help me by giving an alternative.
  
  
  
  Thank you
  Sabarisri. N

  Hi Sabarisri,

  First, there's a material typo in my previous post (hmap2 must be read hmap, all along). I who will edit later because it is annoyingly confusing. But leave it for now.

  I think I was so explicit that I was able to convey the idea that ns1, ns2, etc., if there is more, used by the author of XML_A and XML_B are unimportant as long as you, as the consumer of them, are concerned. Apparently, I was not very successful.

  Let me do it again.

  Assume that XML_A contains the prefixes and namespace URIs like this. I even add one more by way of illustration which may overlap in the two documents.

  xmlns:ns1 = "http://orders.com/suppliers".
  xmlns:ns2 = "http://orders.com/stock".
  xmlns: x = "http://orders.com/serial."

  Then in XML_B, these.

  xmlns:ns1 = "http://customers.com/contact".
  xmlns:ns2 = "http://customers.com/billing".
  xmlns:y = "http://orders.com/serial".

  (ns1, ns2, x) and (ns1, ns2, y) are appearing as such when xml documents are served. x and there are still pointing to the same namespace (think of it as the namespace where the serial number of the orders they need later use to gather the two sets of data.) x and there is maybe not even the same same alphabet their semantics (namespace uri) are the same, the same namespace.

  Put yourself in the situation of consuming them. You know you have to deal with totally 5 namespace uri. You build the dictionary: a HashMap or unique or other properties file. Under your control are the namespace prefixes. You can ignore absolutely what they use ns1,... x, y. Design you your own. That's all.

  hmap.put("p","http://orders.com/suppliers");
  hmap.put("q","http://customers.com/contact");
  hmap.put("r","http://orders.com/serial");
  hmap.put("s","http://orders.com/stock");
  hmap.put("t","http://customers.com/billing");
  

  One more time (p, q, r, s, t) are figurative, you name it what you please as long as they are in line with the production of the grammar of namespace prefix.

  With the help of (p, q, r, s, t), you build your xpath query. The namespace context Manager can resolve correctly. You can't even say what namespace prefix must be used by querying the xml, A or B.

  Hope that makes it clearer by the repetition by another speech.

  Published by: tsuji 7 Sep 2011 08:13 (typos only)

• How to fix the display of files after move

  After several moves photos to a new disk (via file, move in Photoshop Elements 9 organizing) the folder view no longer displays the correct pictures.

  The photos are in the correct locations and properties also show the correct location.

  If I choose a directory in the folder, however, several photos appear which are not in this directory.

  I tried to repair the catalog, but the problem has not changed.

  Any ideas?

  I'm a lot missing an installation to the Organizer to move directories, a complete tree or just my catalog drive letter.

  See:

  http://www.johnrellis.com/psedbtool/Photoshop-elements-FAQ.htm#_Move_your_photos

  (always true in PSE9)

  and

  http://www.johnrellis.com/psedbtool/Photoshop-elements-FAQ.htm#_Folder_Location_view

  I found many posts on this bug and I don't know his reasons were understood, because it seems very difficult to reproduce the situation when it is not. I don't know how to fix this bug. I never had such a problem because I work normally in the thumbnail view, although the folder view is useful for me in certain circumstances.

  Move files by drag and drop in the left panel in the views folder should work.

  Moving files from one disk to another should also work.

• Volume icon missing and disabled in the taskbar properties

  I noticed my icons for volume and network of the taskbar for a week and finally decided to try to repair. I checked the properties of the taskbar and found volume and network selections have been disabled. So I rebooted.  Now I have the clock and network icons, but no battery icon and I don't always have the sound icon (which was the one I wanted) and these two are disabled in the taskbar properties. Any advice on how to reactivate these icons? I have Vista and I am currently on updates.

  I noticed my icons for volume and network of the taskbar for a week and finally decided to try to repair. I checked the properties of the taskbar and found volume and network selections have been disabled. So I rebooted.  Now I have the clock and network icons, but no battery icon and I don't always have the sound icon (which was the one I wanted) and these two are disabled in the taskbar properties. Any advice on how to reactivate these icons? I have Vista and I am currently on updates.

  Use the tutorial below:
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Note: Use the method two or three depending on what version of Vista you have.
  Whe finished, restart (close and turn it back on).
  Now after restarting, go to the taskbar of routine properties and click on these missing icons.

  t-4-2

• The display of file space of total Information System Page after changing virtual memory allocation?

  I thought that I understood that I could set up a file.sys page on any available partition on Windows, if I wished, for example, to create more virtual memory or move a file to another drive. However the changes I make to my computer are not appearing in the system information, after a reboot - why is - this?

  I have successfully configured internal auxiliary training to take on a pagefile.sys when you use the system advanced settings in the computer file system properties. Page created on the auxiliary drive single file memory is equal to once and a half the size of the physical memory of the computer.

  As I had created a larger file of the Page on the auxiliary drive, I then decided to reduce the Page file on the boot up to 300 MB drive. When I did make changes, I clicked on the set then OK and then I rebooted the entire computer.

  After restarting the computer, I tried to check system information for a summary of the changes I had made to the file Page and virtual memory space and I was disappointed to see that the pagefile on the auxiliary drive does not show upward. Information system had just recorded space Page MB 300 in C:\pagefile.sys file, and there is no trace of the larger Page file that I created on the auxiliary drive. How is that?

  If I go back to the virtual memory window in advanced system settings, it clearly shows I changed two files Page. Yet in Information System shows only the boot Page file drive. How is that?

  I always use Internet Explorer with only 300 MB Page file space, and it works really faster than the default virtual memory allocation, however the system soon slows down after opening about 5 instances of Internet Explorer and the system starts asking to close application windows down to save memory. So why does the system not switch to use the Page file on the auxiliary drive?

  Hello

  Thanks for posting your query in Microsoft Community.

  I suggest you to report this query in TechNet forum for better support.

  https://social.technet.Microsoft.com/forums/en-us/home

  Be sure to visit Microsoft Community, if you have any questions in the future.

• Difference in the gateway.properties file when you access of PIA and the opening of the PSIGW folder in the domain of the web server

  Hello

  When I open the file gateway.properties by ITTO's domain\application\peoplesoft\psigw web server directory, I see certain values that are not the same, when I open the file gateway.properties of PIA by navigating to Peopletools-> Integration Broker - > gateway configuration-> gateway.properties file. I tried to clear the web server cache, restart the web server. Even then, I see quite different values of these two places. If I do any change in one of the two places, his not reflecting only with access to another place.

  Could someone delete the following point?

  -I think there is only a file gateway.properties under the web server's domain. When access us the PIA file, wherever to be included in?

  -Is the file stored somewhere in the database as well? where it recovers when PIA accesed?

  -The two are always in sync from different modes?

  -How to synchronize these two?

  Thank you

  Dinkar

  There is only one file per domain. It is read by a web service call when you view it in the PIA. This allows you to edit files from another server. The only time they will be different, that is if the URL of your entry point to a server other than the local server.

  If the URL of your entry points to the same server as your local file, then the only advantage to use the PIA to modify the file (except easy access), it is that sometimes it will update the properties in memory. Change the file in the file system requires to restart the web server for the properties to reload in memory.

• Connection of the server data source that is configured in the DirectJTDataSource_management.properties file?

  Hello

  I am new to the CSC ATG and when I installed CCS, 3 Server instances were created for Production servers, edition and Agent.

  The installation of the ATG contains a DirectJTDataSource_management.properties file that contains a JNDIName property with a default value (JNDIName = ATGMysqlDS).

  Data source from the server, which the DirectJTDataSource_management.properties should point (Production, edition or Agent)?

  He points to the schema of the edition.

• Windows 8: the Page out of the display properties dialog box

  Disappointed.

  Serious problems trying to use the Muse of 2014. I don't know that there is a ready version of GoLive.

  Windows 8.1

  Intel Core i7-3630QM 2.40 GHz

  8.00 GB

  64 bit

  Membership of creative cloud

  Adobe Muse 2014

  I can only see the bottom right of the Page Properties dialog box.

  This occurs on all pages, including the new (fresh) masters and Pages.

  Sometimes I really have to 'Start' to move a cursor in a user interface control... it's annoyiinnnggg

  I won't be able to use the Muse 2014 until I get this resolved. I would appreciate your help as I am looking forward to the last version...

  Thank you

  s

  Set your display to scale to 100% or 150%. Muse 2014 is incompatible with how Windows 8 and 8.1 reach 125% implemented nationally.