Missing pending approval on navigator for user xelsysadm

Similar Questions

• The list of all workflows pending approval

  Hello

  I use Outlook as a front-end web and I would like to use a workflow to list all workflows pending approval.

  I don't want to use the Web web-operator for this mode because it gives too much access in vCO and ideally would like a list of workflows as well as hostnames for approval (even if this bit is not necessary).

  Can someone point me in the right direction for me start?

  Thank you

  Dave

  HM, that seems to also not be there in Outlook.

  If you want to stay with webviews, you could create additional actions which return the list you need, maybe even full html table.

  But then you need to develop your own webview, which calls the action.

  Another alternative: I think that all of the desired commands are accessible via the SOAP API, so you could create an "external" based on the desired technology web interface (which hopefully is Wavemaker course :-)).) But then you lose the easy submission of entrance for the Webviews :-( So this could only be valuable if you have a certain list of possible workflows and inputs limited in the interactions of the user...

  as a combination, you might try to understand mora on the interactionURL of a workflow token and use that URL in a web interface 'external '. Unfortunately, there are not a lot of docs on this AFAIK.

  Some references:

  The link in my first answer (and the links there) :-)

  http://www.vcoportal.de/category/WebViews/ (all posts here)

  Kind regards

  Joerg

• Pending approval

  Hello

  Find the file attatch with red indicator that shows the pending approval.

  We try to contact on given ID [email protected] on this FAQ but it bounce.

  So how do you get approval? on the left side under the status column shows approved. So can you tell me what is in fact?

  Same thing happened with me also. It takes unusually long to approve my account too. I tried to get help from the media, but there is no support for this market section. No FAQ section for Photoshop marketplace don't same although the FAQ link is there for the market air. Or there, am I missing something? There is not even an announcement of whether they need more contributors like us? Or how long would it take to rule on the accounts pending? If someone gets some info, please post in this forum so that at least we could get some info if this market is alive, dead, or all?

• I can't approve my iPhone for restore from iCloud

  I had to reset my iPhone 5 s (running iOS 10) but I can't restore from my backup to iCloud. He asked my previous username for my iPhone, I forgot. On the screen, it is said, "go to one of your other devices signed in iCloud to approve this iPhone". I tried to sign on another iPhone and checked the settings from iCloud, but it does not work. Does anyone know how to fix this?

  See if the suggestions contained in another thread on the same topic might help or not - iCloud Keychain stuck on 'pending approval from another device'

• Set security on 'Decline' for users of Windows/object, cannot access a drive C and d. 'Access denied'-[[problem solved]]

  last updated *.

  Problem is SOLVED. Read my response at the bottom of this thread.

  * Update *.

  Solved for drive D as now but it is still not accessible. Help the Microsoft Experts kindly. By clicking on the C drive, I got "access denied."

  Hello world.

  I need help. I have windows 8, 64 bit computer laptop.  This system has 3 active accounts now. Account_One that is my administrator account. I have another

  "limited account" created on my machine Account_two and the third one is "Guest account" account that is enabled.

  Before you lend my cell phone to a friend in Account_two login I tried to restrict access to drives C and D of this Account_two which is a limited account.

  While I was doing it, I put approval for object 'Windows users' 'decline '. This object is usually the last in the list of objects on the window that appears when we sail to click with the right button on C drive > properties > Security. I realized that instead of

  for Account_two I did for Windows users / which means maybe Windows/users / * which covered my admin account too and that too on the drive root C.

  When I connected to my Account_one account that is an administrator account, I'm not able to access drive C and D where I put the authorization of 'decline' for all the attributes as shown above to object/Windows users.

  One of the folder that was on my desktop allows me to go inside the d drive as I kept this shortcut for easy access, but there is no way to navigate from c or d ' training on domestic issues. Not just me even Windows can not access important services such as 'Restore' and many others built in utilities of windows which simply will not charge blinking message windows has no access to it!

  Please help how to access drive C and D for my administrator account. I am connected to this account now, but can not access drive C or d. when I go to the Security tab in the drive C and D right click Properties I get the screen it as: you must have read allowed to view the properties of this object. Click Advanced to continue. When I click on advanced, I see the "advanced security settings for local disk (d :)), where the owner is presented as: unable to display current owner."  Exchange (Link) when I click on 'Change' I get the error message: cannot open access control editor access is denied.

  So I put the Windows/user object to "deny" on the tab security for all read and writes, and I'm not able to access anything whatsoever since my administrator account.

  Please let me know how to change access to 'allow' for c and D drive for the object user/Windows. From now there is no way to access this object by result cannot set permissions there.

  Help, please.

  Thank you very much.

  Thank you very much.

  Problem is SOLVED!

  After three days of effort I was finally able to fix this mess.  It took me three days after going through many similar positions as mine but no final answer or fix, so I kept

  through the 'access denied' messages on this community and won an idea on what

  had happened and what needed to be done. What I found that there are several hundred people

  like me, who have faced this problem and there is no final official help file to explain how to fix

  He IS but he MICROSFT official 'support chat' where they ask for $149 to connect remotely and difficulty

  the problem!

  in any case, here's how I solved my problem for people who need to fix it in case it happens to you.

  How the problem began; Read my original post above on top. In short, I set the security setting to refuse to

  Users of Windows/under the Security tab that comes after a right click drive then properties > Security. I put it and lost access to all readers!

  How I fixed it.

  Thanks to some nice people on this page of the community who have posted knowledge. A man had displayed the creation of "Administrator" "guest account of orders that I did now, I could sign out of my account and get on the 'Administrator' account with admin privileges so that I could fix it the mess on my account problem. So if you have similar problem first create the command prompt administrator account. However this only solved the problem partially as I could reverse the problem only on drive D and not on the drive C. I was able to go to security settings and set the properties 'allow' for drive D, but I was not able to read the page of security for drive C as he said I haven't read privilege he even newly created admin account.

  Now if I needed the "Access denied" problem on drive C. I continued through messages of so many "access denied" here and discovered about utilities like SFC, TAKEOWN, ICACLS, but none of them worked from the command prompt I always said "access denied."

  Thing was to take the mouse to the right of the screen and get this blue bar, then settings > change PC settings > General - Advanced startup-press the button -. Then he made up the blue screen, where you have the option called troubleshooting... go there and then advanced setting > look to start Windows from the command prompt. Do you have a command prompt with C:\windows\system32 on the command prompt. Here, my order was accepted both takeown and icacls. If I shot a command there: TAKEOWN /F /R C:\/a and I also tried icacls to give permissions after checking using the syntax on the command line itself. All commands ran successfully this time, but be careful what you give in the command. It's under a lien high built based on the account of Windows 8.

  Takeown command executed successfully and it solved my problem. I leave the command prompt then connected to this administrator account. This time, I could go to the Security tab of the C drive and set allow it for users here. Still on some issues, I was getting no access permission, but I was asked to change it to allow me to access to and I was able to do.

  For access to the C drive on the Security tab, you need to go to the 'Advanced' and change the owner too.

  in any case I'm happy this is finally resolved even if I wasn't getting much help responds I used the previous positions of other threads to solve.

  Since he was not an official help of WINDOWS or MICROSOFT on that page, I'm sure I did the security setting while making the methods of trial and error on my machine which may not be the right setting from the point of view of security in general, so I'll try to reset the default state machine as my problem is now solved.

  So I fixed it. If you need help let me know and I'll try to help you, and I do not charge $149 or $99.  ;-)

• Parameters of the env for user oracle, during the installation of Oracle on linux

  Hello Oracle Experts;
  
  Basicallly my major is electrical and electronic
  
  I am very new to ORACLE/LINUX [LEARNING ORACLE DBA] technology.
  I have THREE questions... Please, help me understand oracle concepts.
  
  QUESTION 1:
  I get confused about 'parameter bash_profile' and it is contained
  I Googled, he said to set variables for user oracle env. Ok.
  Can someone explain clearly what is happening exactly when "setting bash_profile?
  
  
  MY SETTINGS BASH_PROFILE
  My bash_profile that contained the following:
  
  + # Oracle parameters +.
  TMP = / tmp; Export TMP
  TMPDIR = $TMP; export TMPDIR
  
  ORACLE_BASE = / u01/app/oracle; export ORACLE_BASE
  ORACLE_HOME=$ORACLE_BASE/product/10.2.0/Db_1; Export ORACLE_HOME
  ORACLE_SID = TSH1; export ORACLE_SID
  ORACLE_TERM = xterm; export ORACLE_TERM
  PATH = / usr/sbin: $PATH; export PATH
  PATH = $ORACLE_HOME/bin: $PATH; export PATH
  
  LD_LIBRARY_PATH = $ORACLE_HOME/lib: / lib: / usr/lib. export LD_LIBRARY_PATH
  CLASSPATH = $ORACLE_HOME/JRE: $ORACLE_HOME/jlib: $ORACLE_HOME/rdbms/jlib. Export CLASSPATH
  + #LD_ASSUME_KERNEL = 2.4.1; export LD_ASSUME_KERNEL +.
  
  + If [$USER = 'oracle']; then +.
  + If [$SHELL = "/ bin/ksh"]; then +.
  Pei 16384 ulimit
  ulimit-n 65536
  on the other
  ulimit-u 16384-n 65536
  FI
  FI
  
  QUESTION 2:
  
  Please note: this url says a lot of env variables
  
  http://www.idevelopment.info/data/Oracle/DBA_tips/UNIX/UNIX_4.shtml
  
  2. in my case, why following env variables * [LD_ LIBRARY_PATH, CLASS_PATH, PATH] * are missing?
  
  My pc showing that four env variable $ env |  grep EI EI TNS ORA
  
  ORACLE_SID = TSH1
  ORACLE_BASE = / u01/app/oracle
  ORACLE_TERM = xterm
  ORACLE_HOME=/U01/app/Oracle/product/10.2.0/Db_1
  
  QUESTION 3:
  
  * [LD_ LIBRARY_PATH, CLASS_PATH, PATH] *.
  
  * Are they [above mentioned variable env] needed (or) not necessary for oracle DB? *
  To enumerate env variables, why they are not displayed? (something wrong)?
  
  
  As a beginner, I expect some technical information to improve my knowledge...
  Thanks in advance;

  969352 wrote:
  should NOT serve as a substitute for Oracle installation manual.

  Specifically can provide you good document or links for 10g and 11g?

  Wire suggest me to follow the docs of oracle installation... Thank you

  =================================================
  Learn how to look for things in the documentation is good time invest in your career. To this end, you should drop everything you're doing and do the following:

  Go to [url tahiti.oracle.com] tahiti.oracle.com.

  Explore your product and version.

  TO BOOKMARK THIS SITE

  Spend a few minutes to familiarize yourself with what is available here. Take note special tabs "books" and "search". Under the tab 'books' (for 10.x) or the "Master books list" link (for 11.x), you will find the complete documentation library.

  Spend a few minutes just know what kind of documentation is available by simply browsing the titles under the "Books" tab

  Open the reference manual and spend a few minutes looking through the table of contents to familiarize yourself with what kind of information is available here.

  Do the same with the SQL reference manual.

  Do the same with the utilities manual.

  Do not read the above in depth. These are reference manuals. Knowing that just getting here is to be referenced. Ninety percent of the questions on this forum can be answered in less than 5 minutes just looking for one of the books above.

  Then, set a plan to dig deeper.
  - Read a chapter a day from the Concepts manual.
  -Take a look in your alert log. One of the first things listed at startup is the parms of initialized with default values. Find out about each of them (shown in your alerts log) in the reference manual.
  -Take a look at your sqlnet.ora, listener.ora and tnsnames.ora files. Go to the manual of network administrators and ask about what you see in these files.
  - When you have finished reading the guide to Concepts, do it again.

  Give a man a fish and he eats for a day. Teach him to fish and he eats for a lifetime.

  =================================

• Module and Navigation for Cairngorm 3.0.13

  Hello

  do you have a calendar on the release of Module and Navigation/NavigationParsley to the repository maven for Cairngorm 3.0.13?

  I am currently getting errors using the 3.0.12 version, which I think is due to the different version of the compiler flex for 3.0.12 (i.e. 4.0.0.x), while the version of the compiler flex 3.0.13 is 4.1.0.x, which is the version that we use for the construction of our project, too.

  Don't want to get on your nerves, just trying to get a feel for speed and to plan ahead for our integration of it / hudson , great job on the transition to maven makes life a lot easier! If we could help you on that front (I don't really have what is now missing out the Module/Navigation/NavigationParsley for 3.0.13, maybe I could help?)

  best Jonas

  Good news: we've just released new libraries as 3.0.14. The library of navigation left RC to 1.0.

  We don't have not updated the wiki still however, which could take a few more days.

  Best,

  Alex

• IOM: authorization to search for users

  Hello
  What are the permissions that I give to a group, so that members have the ability to search for users in the menu 'users-> Manage?
  
  Background: I assigned to the menu item group 'Users-> Manage', but each search returns nothing, so I guess it's a permission problem.
  
  Thank you.

  Give "Read" access for the Group on the particular organazation.

  Sign in as XELSYSADM
  Manage the Organization--> research of the orgzanization
  Select "Administrative groups" in the drop down--> affect the Group and give 'Read' access

• Navigation for some entries on the issues of monthly closing and end of month closings

  Hi Experts
  
  
  A few entries on the month end close and
  What types of emissions be meet when closing (refer to any).
  
  Navigation for end of month closures

  In the case of the inventory: the monthly accounting period closed, you must make sure that there no transactions shipping processed, unknown of the important operations, waiting for TEC costing transactionsm etc... The number of these kinds of operations should be zero. For example, if there is no delivery of unprocessed transactions which could be stuck/wrong during the execution of Program Interface travel stop, then you cannot close the period for that month until that you delete these transactions. Check metalink, 262979.1 to the same note.

  Navigation is the inventory > Cycle farm accounting > accounting periods in the inventory. Click on the button waiting to see pending transactions. If there is NO resolution required to be done, you can close the period INV for this month.

  Kind regards
  Agnes

• How to make the address bar behaving like search bar? I mean SMART search, as it implemented in Chrome (very comfortable for users).

  For example when I type a word in the search bar, it begins to give search engine suggestions, so don't HAVE TO TYPE THE ENTIRE SEARCH PHRASE!
  The same behavior is in the address bar of Google Chrome. So in Chrome address bar and search bar are combined into one that is very comfortable for users.
  In Firefox, you have here two different bars, which makes no sense. I used Chrome before and usually by type of force of habit in the address bar to search for something and have to type the whole expression there to begin the search. It is very stupid and using the address bar to the fruitless search.
  Screenshots attached.
  So, do we not have any add-on or option to merge or combine the bars or to implement smart search in the address bar?
  Thank you.

  You can look at extensions such as these:

  • Foobar: https://addons.mozilla.org/firefox/addon/foobar/
  • Omnibar: https://addons.mozilla.org/firefox/addon/omnibar/

• Where can I find Firefox 7.0 to install? Is there a link maintained where all the firefox releases are available for users

  Hello team,

  Is there a link maintained where all the release of firefox and its patch are available for users to download & install

  You can get Firefox 7 here

  • http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/7.0.1/

  BUIT its recommended to use Firefox 8

• Mac Mini server files for users of 50 +.

  Hello

  Our current file server is the last of the Xserve running 10.6.8.  It's getting up there and if it's the toasted bread, so I am. If I get nervous.

  I waited for a refreshment HW of Deputies and Minis, but none have been forthcoming and I don't see even in Active rumors about them. If Apple decided professional users can take a flying leap which will suck because I'm already doing a HyperV Windows 2012 nightmare and I want more. But I digress...

  Anyone used later (also older than it is) makes Mac Mini with a Promise RAID as a file server for users of more than a dozen? We have a staff of 50 more or less, more use as a store of files for our portal and web server (each on a machine separate with mounted shares) of CrushFTP file sharing.  I would like to know popular experience actually using a Mini to serve that many users and if the aggregation of links to one of the thunderbolt with ethernet port ports actually works.

  Anyone done this? How is the performance?

  Thank you

  Jeff

  Not many users, but one of my clients is written four or five DTV full-HD video streams in couple of tables Promise Pegasus configured RAID-6, and the berries barely noticed the load.   This along with the generation previous Mac Mini.   The limit you will probably hit here, it's how much you can stuff through the Gigabit Ethernet, which probably means using a bolt of lightning for the Ethernet card or two - the bottleneck will be on the LAN side.  But I suspect that you will have to prototype your load in all cases.

• I NEED administration PASWORD for USER NAME "UPLC".

  I NEED administration PASWORD for USER NAME "UPLC".

  vijay10 wrote:
  

  I NEED administration PASWORD for USER NAME "UPLC".

• reset password for users of domians cannot live

  cannot reset the password for users of domians direct for domain megabitecafe.com

  Hi manisht,

  I would suggest to repost your question in our forums TechNet here:

  http://social.technet.Microsoft.com/forums/en/ieitprocurrentver/threads

  Thank you.

• Management of permissions for users on the network.

  Hello

  My question is General and related to xp and windows 7 as well.

  Can someone explain to me how to manage permissions for users on the network?  It's easy to do the job when I talk to local users, but I can't find a way to add computers to the dialog box object types. I have only options of theses: built-in security principals, users and groups. In the locations list, I see only my computer and cannot find how to add computers to all networks.

  Thank you

  For Windows XP, it makes a difference if "Simple file sharing" is enabled or disabled.  Simple file sharing is * always * activated if you have Windows XP Home Edition and it is the default setting in XP Pro.  Sharing files Simple enabled, * all * users who are connected to a network on your machine are forced to authenticate on the machine as the 'Guest' user - which means that you have no user authentication in Windows Home or XP Pro without disabling Simple file sharing.  This means that every network user has access only to files to the files which has permissions for the Guest user.

  If you have XP Pro and disable Simple file sharing, then you can ask users to authenticate on your local machine and give everyone access to its own set of file permissions.  If the user connects to a network computer that contains the same user name and password that the user is currently logged on the local computer, the authentication is automatic.

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"

  <>http://support.Microsoft.com/kb/307874/en-us >

  HTH,

  JW