missing printer driver

Similar Questions

• HP Color LaserJet 9500 - stapling feature missing in the printer driver Uviversal

  Hello everyone,

  We use a Color LaserJet 9500 in an enterprise environment. He had a hardware failure, our service partner repaired. Since then, the stapling function is missing from the universal printer driver. On the machine itself, we are able to use the stapler, but not on our PC.

  You can see from the attached images, official stapling is visible on screen captures, but on our machines, stapling is missing.

  How we miss?

  Thanks in advance!

  Paul of Hungary

  Don't know where on your driver, but he should be a tab like device settings on this tab will be a section called installable options and in this section that you will need to change the clip in not installed not installed. Most likely, the driver was reinstalled and the default probably isn't for the stapler unit. You must go to the folder of your printer and right click on the printer icon and then scroll the first properties if more than one and then left click and find the tab that has the installable options. Good luck.

• HP C7280 wireless all a missing configuration printer driver

  I just installed windows 7 32 bit and I can't go to the printer.  Networks see the printer and when I run the diagnostic it says that the printer driver does not exist.  I already downloaded the specified printer driver and software from the HP website, but it cannot add my device.  When I run it it can not connect to my printer even if seen on the network.

  What to do next?  I connect via a wireless linksys network adapter.

  Thank you

  Thanks for your suggestions pcwizard.

  I found and fixed the problem, although I don't know how it happened.  Missing driver for PCI simple communication controller.  I found the driver on the web and installed.  Then I uninstalled all HP software and printer and reinstalled everything.

  Thank you

• Missing MS Fax print driver

  I was using Microsoft Print/Scan to fax. I chose the printer called 'Fax' to print the doc and open MS fax. Recently, when I select 'Fax', without print options are displayed, and I can't print. It seems that the print driver for MS FAX is missing. How is what has happened, and what can I do to restore it.

  I was using Microsoft Print/Scan to fax. I chose the printer called 'Fax' to print the doc and open MS fax. Recently, when I select 'Fax', without print options are displayed, and I can't print. It seems that the print driver for MS FAX is missing. How is what has happened, and what can I do to restore it.

  EM48

  Go to 'control panel', 'programs and features' and in the left pane, click on "Turn on or off windows features". Leave the box to fill out, scroll down and expand, 'Print and Document Services'. Uncheck the box next to Windows Fax and Scan , then click on 'OK'.

  This action allows you to uninstall the current installation of corrupt Windows Fax and Scan. If you are prompted to reboot, do so.

  Re-install Windows Fax and Scan, by following the instructions and checking the box.

  Does this solve the problem?

• Acrobat for Microsoft Office 365 PDF print driver is missing or damaged

  Acrobat for Microsoft Office 365 PDF print driver is missing or damaged. Tried to repair Acrobat installation. However, MS 365 print AdobePDF doe does NOT - freezes app.  Can someone help me find the PDFMaker add-in or plug-in or a support that would allow applications MS OFFICE 365 (v.2013) print to PDF?  Thank you in advance. Bob

  You should be able to print to the Adobe PDF printer with v. 9 (I think 9.5.5 is later). However, c. 9 is not compatible with OFFICE 365, and that's why you have no PDF Maker. The alternative to OFFICE 365 is to use the built in MS PDF creator (usually in save them to PDF or XPS). With OFFICE 365, this should be part of the package. With earlier versions, it's an add-on. When you select the record, there is a box of options to enable saving of bookmarks and others.

• 10.1.3 Acrobat pdf printer driver is missing

  Just noticed that my pdf print driver is missing in action.  Win 7 x 64.  What I tried:

  1. reinstall Acrobat X Pro

  2. installation printer manually as described here

  No results.

  It could be related to a 10.1.3 update but I'm not 100% sure.  I have a laptop, very similarly configured on the desktop, it's over and 10.1.3 and PDF printer is still there.

  Thank you very much!

  EDIT: also, perhaps that someone can tell me how to remove Adobe Fireworks?  It seems that I installed it accidentally when you reinstall Acrobat.  It is not in Add/Remove programs.  I installed via installer CS Design Premium 5.5.

  I had the same problem. I fixed it.

  I lost the option to print Adobe PDF. And could not manually restore without errors.

  I tried everything and nothing worked. Then I noticed that I had the drive on YOUR computer as well. So, I uninstalled DRIVE and repair ACROBAT.

  So:

  (1) make sure that you remove / uninstall all versions of READER on your PC.

  (2) then repair ACROBAT.

  Good luck.

• New printer driver is missing or Invisible - Mac

  I just downloaded and installed the drivers for a MX922.  Mac OS 10.11.3 the installer says installation was successful.

  The scanner drivers are all visible, but this isn't the app/printer driver.  The manual says I should be able to find and open the print driver app in the Applications folder.  He's not here, well that are drivers sanner.  A run the installer twice, without any help.  SpotLite search does not find a file with the name of the driver anywhere on the disc.

  I was able to manually install the printer to print to a Wi - Fi connection - but would like to have the app available printer.

  Thanks in advance for any help that anyone can provide...

  Drivers & downloads-> software

• my printer says I'm missing a driver paid for a download of file wiafbdrv.dll__I file, but I need to know where to insert this file for my printer.

  Printer is a Kodak all-in-one model 3250

  Hi bilkomike,

  1. when exactly you get the error message?

  We recommend that you reinstall the printer and check the result.
  see How to download and install the latest printer driver from your printer manufacturer's Web site .
  b. follow the instructions on the Web page correctly to install the printer successfully.
  c. restart the computer and check the difference.

  For additional troubleshooting, see resources for the resolution of the printer in Windows XP problems

  For further assistance, please contact Kodak support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Deskjet e3520: manually uninstall Print Driver

  Hi all!

  I got myself in quite the situation when I tried to clean up some temporary files and save space on my rather small SSD.  As such, I accidentally deleted the uninstall program for my HP print driver and now I can not uninstall the software, nor I can install newer software.  The software is looking for a file, DJ352x64.msi, located at AppData\Local\Temp\7zS0DDA, but there is obviously no because, well, I deleted it.

  So, any advice on how to manually uninstall my driver's license so I can get my drivers updated?

  Thank you!

  -Stinger

  Hi @Stinger07,

  Welcome to the Forums of HP Support!

  I understand that you are unable to uninstall or reinstall the software for printer HP Deskjet-e3520. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you have tried to free up space and accidentally deleted some elements of the software of the printer. We should be able to get the software working again.

  NOTE: Re-download the HP installer will put the new 7z folder in the Temp folder.

  Let's start by cleaning up your computer.

  • Cleaning disc in Windows 10
  • Perform the clean boot in Windows 10 / 8 / 7
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Uninstall and reinstall the HP software.

  If you use a USB connection between your computer and the printer please unplug this cable now.

  Step 1: Remove the printer:

  We want a clean slate to install your printer on the computer Windows 10. Therefore, I will you ensure that no trace of your HP Deskjet does not currently installed on your computer.

   

  1. click on the Start button

   

  

   

  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

  3. click on programs and features to launch the window.

  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and look for your HP Deskjet. If you see your HP Deskjet in the list, click it and choose Uninstall.

  5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

  6. then, click on the menu start of new

  7. this time type devices

   

  8 click on devices and printers to launch the window.

   

  

   

  9. in devices and printers are looking for your HP Deskjet. If you see if if please right click above and choose 'Remove' or 'Remove'.

  10. Once your HP Deskjet printer is more than showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

   

  

   

  11. click on the drivers tab

  12. look for your HP Deskjet printer driver. If the list, please click it and choose delete

  13. Select delete the driver only

  14. Select OK

  15 click apply and OK in the print server properties window.

  16. close devices and printers. Please proceed to the next step.

   

  Step 2: Install the device:

  1. Please click here to download the full functionality of the software and the driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, leave the disconnected cable until the installation program prompts you to connect

  Once installation is complete, please try printing and scanning.

  Source published by my colleague X-23.

  If the problem persists, you can try the solution proposed in the thread below.

  (1) open the command prompt window by clicking on the Start > applications > Windows system > guest.

  Type: net stop spooler

  Enter: net start spooler
  Type: exit

   

  2) open Windows Explorer and navigate to:
  %SystemRoot%\System32\Spool\Drivers\W32x86

  NOTE: any % is usually C:\Windows, but it might be "winnt" or something else; It is set when the OS is installed.  Most systems are like this C:\Windows\system32\spool\drivers\w32x86

  (3) in the w32x86 folder, there will be other folders and files.  Delete everything inside, but DO NOT remove the w32x86 folder.

   

  4) restart the computer - perform clean boot in Windows 10 / 8 / 7

  Source Posted by a member of community jaredjb

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• MS Office 2010 and C4380 printer driver

  My printer driver C4380 to work seamlessly with MS Office 2007. After installing MS Office 2010 I find there seems to be a conflict between the HP printer driver and print MS office dialog box. For example print double-sided is very difficult. I have to fix double-sided in the dialog boxes and then the MS Office dialog box seems to replace the HP printer driver and print the second series of pages on the opposite side in reverse, which I can't seem to change.

  Is there a setting in the dialog box HP or MS Office that I'm missing?

  ancient - mariner wrote:

  My printer driver C4380 to work seamlessly with MS Office 2007. After installing MS Office 2010 I find there seems to be a conflict between the HP printer driver and print MS office dialog box. For example print double-sided is very difficult. I have to fix double-sided in the dialog boxes and then the MS Office dialog box seems to replace the HP printer driver and print the second series of pages on the opposite side in reverse, which I can't seem to change.

  Is there a setting in the dialog box HP or MS Office that I'm missing?

  Hey David,

  This problem only occurs in Office 2010? Is also double-sided printing the only question? try ingnoring the word 'Set' and rather go in my printer properties, select the finishing tab and select "print on both sides (manually). This should copy double-sided working properly.

  Thank you

  Sean

• Problem with the printer driver. Get a spooler of saying error massage under system has stopped working.

  I installed the printer driver (HP Officejet pro K5400) to my machine and got the test print as well. but after that when I try to print, I get an error saying Spooler subsystem massage is stopped and was closed. What can I do for this. I tried to reinstall the software and start manually, but all failed.

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Dell Photo 964 for W7 x 64 AIO printer driver

  Hello

  I am looking for a printer driver to use my printer Dell AIO 964 Photo under Windows7 ultimate x 64.

  Thank you very much in advance for your help.

  koalablue95

  PudgyOne,

  as already reported:

  I'm still looking for a working driver sound for my Dell AIO Photo 964 USB cable connected to a laptop of Lenovo T61 with:

  OS name Microsoft Windows 7 Ultimate (multilingual; language: English, United States)

  Version 6.1.7601 Service Pack 1 Build 7601

  Manufacturer OS Microsoft Corporation (real & registered)

  The LENOVO system manufacturer

  System model 6460A 44

  System Type x 64-based PC

  Processor Intel (r) Core (TM) 2 Duo processor T7500 2.20 GHz, 2201 Mhz, 2 Lossnay, 2 logical processors

  Originally, the laptop came with an OS 32-bit of Windows Vista under which the Dell AIO 964 Photo worked without any problems and I could use all it's features.

  After the update to W7 x 64 in 04/2012, all my devices and other drivers are working well except the Dell AIO 964 with compatible software Photo missing driver!

  Strictly following your recommendations of procedure installation to date, always the driver installation fails with:

  -"Device driver software was not properly installed" or with

  -' Dell Photo AIO Printer 964: ready to use '; and "964:No found Dell Photo AIO printer driver.

  I use the Windows Firewall and AVG2012.

  Driver installation failures also occur, when I turn off:

  n ' matter what internet connection

  -temporarily the firewall and/or

  -temporarily anti anti-virus AVG2012

  which means that the firewall protection software and the virus should have no impact on an installation driver successful or?

  I hope that these details could give you an "idea" for a procedure of working solution.

  Please let me a comment on this topic:

  "In the meantime, I must admit that I am a bit disappointed by the structure of DELL support"

  I'm looking forward to your reply.

  Kind regards

  koalablue95

• Base of the packaging for 2540 printer driver all in one, he says its lack.

  Hello

  pls help got the new printer hp 2540 and don't work on my laptop computer says missing kernel driver package, works very well on my computer laptop girls so I know nothing wrong with the printer.

  Thank you very much

  fimary

  Hello

  Thank you very much for your help, crossed the tmp folder, and when he opens once again there is no zz file or even anything at HP.

  I'm going to enjoy this weekend to a new laptop, as this morning I can't open the files adobe either and my outlook express does not work now, some of the interenet is working, but some pages will be just not open, facebook will not open (but it's probably a good thing), thank you very much for your help you have been wonderful.

  Sorry don't know if you're male or female but hugs sent for all your help.

  FI

• Message of lack of print driver

  I got a C5100, and it has been deleted/replaced by a C310a. Now, devices control panel and my computer to the printer icon shows a warning triangle and the problem seems to be that the computer tells me that the C5100 printer driver is missing. Well well, the printer everything is here, in the trash to be exact, but my cell phone as my wife gives the same message on the missing driver.

  How to rid the computer to try to find a print driver that is no longer necessary?

  Please send me the answer, [personal information deleted]

  Hi Bill,

  Thank you come back to me, I apologize for the late response. If you go into your control panel the two computer you still see the C5100 software? You always have the software cd is it came with?

  I would like that you go into your Device Manager look under other devices and make sure that the c5100 is not listed, follow the steps below:

  Start > Search 'Device Manager' > other devices > Please note that what is indicated here.

  I hope hear from you soon, so we can continue to troubleshoot.

  Thanks again,