Missing URL, product...

Hello

I use VMware Studio 2.1 and there is a problem with the addition of a URL of product.

I defined a seller and a URL for product, but only the URL of the provider is shown in a virtual machine, I had to build.

When I look in

/opt/VMware/etc/appliance-manifest.XML

I see this:

<?xml version=&quot;1.0&quot;?>
<update xmlns:vadk=&quot;http://www.vmware.com/schema/vadk&quot; xmlns:ovf=&quot;http://schemas.dmtf.org/ovf/envelope/1&quot; xmlns:xsi=&quot;http://www.w3.org/2001/XMLSchema-instance&quot;>
  <product>myVM_v2</product>
  <version>2.0.0.4</version>
  <fullVersion>2.0.0</fullVersion>
  <vendor>my GmbH</vendor>
  <vendorUUID>my UUID</vendorUUID>
  <productRID>my RID</productRID>
  <vendorURL>http://www.mydomain.net</vendorURL>
  <productURL></productURL>
  <supportURL></supportURL>
  <releaseDate>20100806164758.000000+000</releaseDate>
  <description>
**************************************************************
This update may require a reboot
(see web changelog for more information)
**************************************************************</description>

  <EULAList showPolicy=&quot;&quot; introducedVersion=&quot;&quot;>

  </EULAList>

   <UpdateInfoList>

       <UpdateInfo introduced-version=&quot;&quot; category=&quot;feature&quot; severity=&quot;important&quot; affected-versions=&quot;&quot; description=&quot;&quot; reference-type=&quot;vendor&quot; reference-id=&quot;&quot; reference-url=&quot;&quot;></UpdateInfo>

   </UpdateInfoList>

  <preInstallScript></preInstallScript>
  <postInstallScript></postInstallScript>
</update>

As you can see the EULA is also absent here (in earlier versions of VMware studio here was also the integrated whole EULA) but

the EULA displayed on first boot, so I don't know if it's a problem, too?

Any help why the URL of the product is ignored will be very nice...

Thanks in advance

Thomas

Missing persons, you can edit /opt/vmware/etc/customize/Generators/appliance_manifest/appliance_manifest.xslt (in Studio) and

replace

with

and then rebuild the virtual machine.

Regarding the LICENSE agreement, given that the device file - manifest.xml is primarily intended to be used by the update feature the application in the next version of the EULAList element in the xml file would actually be filled with new content of EULAList under the UpdateSection_Type in the profile of construction. The EULAList allows ISVS to apply specific CLUFs associated with the update which may or may not be the same as the General CLUFs for the device.

Currently, you should consider in looking at/opt/vmware/etc/isv/EULA / * in the unit of the end for the content of the EULA as oppose to function unit - manifest.xml that may change over time.

Tags: VMware

Similar Questions

  • New windows open with different toolbars (and missing URL bar)

    When I select the button 'New window' or 'Open in a new window' in the context menu, opens a new window of Firefox - however, the toolbars are completely different from the original open window. Specifically, the URL address bar is missing.

    I can add, but change how to change my original toolbar installation.

    More bad behavior: even if I change the new window to the way I wanted, new windows open in this window to return to the modified version, with no toolbar location.

    You can try:

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Replacement motherboard caused my missing number product! @#?

    OK, after that fixed HP replace my motherboard because of some devices on the motherboard has encountered a few problems... then I open software assistant HP spprt and difficult to do something because of the number of products undetected... so I am gone for nothing that ve find something to do with that and someone recommended card mother tattoo... I had the software tatoo and too afraid to muself as I read the other posts on this subject that this procedure can be run only by hp? ! and I thought that they should already tattooed my motherboard after finishing to replace im really upset and press... can someone tell me how in hell can I recover my series or product key back to my pc... the problem is I do not see the HP logo when I start my pc, I already turn off the stuff..:/ diagnostic boot but it's the same, more when my pc went to sleep mode only indicator light monitor went to Ember not light on the CPU... omg quick replay please... I feel so disappointed on the purchase of HP products and shit...

    HafizulHazmiey,

    Here are the specifications of your desktop HP Pavilion p6645d. Based on these specifications, your computer was presented for sale or 06-Sep-2010 in some countries / regions in the Asia-Pacific market. When your computer was service by HP or an authorized service center, the replacement motherboard should have been tattooed with etc. series, model of your computer. Without that information, software support HP and HP Recovery may have problems to do their job. Please contact the HP support in your area. IF you can not get a positive result, please PM (private message) me and I'll try to help your with the question.

  • Sticker license Vista missing - have product key, but NO version

    Hi all

    I am currently working on a laptop that originally shipped with Windows Vista. The original hard drive failed and the system is unable to boot from it.

    I have a replacement for the system HARD drive, but the license sticker to Windows Vista on the bottom of the laptop disappeared, and although I can read the product key, I can't tell which version of Windows Vista this appies to (for example, 'Basic', 'Home premium' etc.).

    I tried the site of the manufacturer without success and is not any support for system recovery. I have Windows Vista OEM discs, but I'm not sure who the product key to apply to. is there a way to tell? This information can be found by browsing the files on the original defective HDD?

    Thanks in advance for any help.

    Call the manufacture, they should have a record of your purchase. Once you are able to identity what version of Vista you have to find a friend with a 'Detail' of Vista installation DVD and use it to install (you choose the version of Vista you have ordered) Vista using your product key.

    J W Stuart: http://www.pagestart.com

  • Missing Windows product sticker.

    How can I know my laptop my windows product key when the sticker for windows has disappeared. Is there another way?

    In addition to checking the battery compartment:

    Option 1:

    If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

    Option 2:

    If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

    Option 3:

    If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  • The canonical URL - where product Export / Import?

    Hello

    I'm so happy BC has finally canonical URL, but I'm completely confused how to upgrade in bulk.

    For example BC says:

    By default, BC will choose the first product URL and make it canonical, insert a link rel = canonical head and response header to order the browsers and engine that is the preferred URL of the investigational product. Customers will be able to change the canonical URL through the editing of product of the administration console interface or via the import motor (for updates of bulk).

    There is no canonical field updates in bulk.

    The only one I could think it was would be: "Product URL".

    BUT the import of the said model.

    URL #Product

    #This column is ignored. It is no longer available to ensure that an exported file can then be imported

    Am I missing something?

    Hi DandyDahlia,

    In fact, the response that you got support is not quite correct. I will work with the rest of the support team at this address.

    You can change the canonical URL to import by changing which catalog is listed first in the list of catalogs in the catalog column. There is no canonical URL column, everything is controlled by which catalog appears first in the list catalogs.

    I've also been tracking the case you connected with support and you have answered so.

    Thank you
    Florin

  • Can't access websites in Google Chrome error: the requested URL could not be found

    Original title: Error message

    Hello, I get the message below when I try to go to a Web site, but only from Google Chrome, it works from Internet explore and he used to work in any case of Chrome before, so weird and so boring!

    any ideas?
    Thank you very much.
    ERROR the requested URL could not be found

    While trying to retrieve the requested URL, the following error was encountered:

    • Invalid query

    Some aspects of the HTTP request is not valid. Possible problems:

    • Missing or unknown request method
    • Missing URL
    • Missing HTTP identifier (HTTP/1.0)
    • Demand is too great
    • Content-Length missing for POST request
    • Transfer-Encoding not supported
    • Illegal character in hostname

    Footprint 4.8/FPMCP 

    Hello

    If I understand correctly, you are unable to open Web sites using Google Chrome and the same works fine in Internet Explorer.

    Did you of recent changes made to your computer?

    We will try the suggestions from the following link.

    Clear your cache and other data from browser

    http://support.Google.com/chrome/bin/answer.py?hl=en&answer=95582

    If the problem persists, you can communicate with the support of Google Chrome.

    http://productforums.Google.com/Forum/#! Forum/chrome

  • CLIQ can sync w / my MAC and Entourage calendar?

    How can I sync my calendar CLIQ w / my MAC and Entourage? Multimedia link is for PC y at - it a MAC version. I want to use my calendar Entourage on my CLIQ, which can never be?

    Mark/Space is about to release its Missing Sync product for Android phones and when it comes out I highly recommend taking a look because they are a very good product. You can read the news http://www.markspace.com/products/android/missing-sync-android.html

    the best way I've seen so far is just sync your Entourage with gmail, then your CLIQ with gmail.

    There may be another way that I haven't yet discovered.

  • FSX and activation

    I have since 2 years used FSX (SP2 now underway of execution) on Vista with no problems, activation and all. Suddenly two weeks ago FSX starts asking for the activation of the product. After trying several times, I decided to reinstall FSX from scratch, but unfortunately the answer is always "a technical problem has occurred when accessing the online server. When you try to use "Activate by phone" FSX comes with a product Activation error = "Unable to retrieve the product installation ID", which prevents me to activate by phone. I tried to repair the installation of a couple of times - just to be on the safe side - but no difference.

    Is the offline activation server or...?
    Any help is appreciated.

    Kind regards
    Klaus

    Looks like you will need to call Microsoft and activate the product manually if you don't get anything since if missing the product identification number, the product has not been activated.
    All you need is the key that came with your copy of FSX to activate by phone. At least that's what I had to do it once time, I had to call on the phone to activate manually.

  • Turn the HTML in Code design in large series

    Hello

    I've scraped some data Web sites and want to compare images from different products.

    I scratched the name of the product, the product url, product img src, on a csv file that I saved then in a microsoft excel file, and then IMPORTED IN DREAMWEAVER.

    But instead of display the img src HTML it displays as raw html text.

    Because it has more than 200 lines, it would be a lot of your time to go to the file Insert HTML and copy and paste the html code in the cell.

    As I do with many other sites so that it is not very effective at all.

    Below is an image of an example of a part of the table.


    Thank you!

    Dreamweaver.PNG

    As you can see the img src tags are just printed instead of display images.

    Use find and replace to replace < to and > >

  • ProductionURL in siteRepository

    Hi all

    What is the use of ProductionURL in SiteRepository. Whether it is used by OOTB. If so, what component it is used.

    Thanks in advance

    In a Multisite environment, we use unique ear to run sites.

    There are two entries in the site:

    contextRoot: the root of the ear context, defined in the web.xml file

    Base URL (production url) of the site: context root + virtual identifier to the url of the site: by using this url for production access us to the sites.

    See the Oracle ATG Commerce Web - creating a related Site regional store

    So, if there are two sites: siteA and siteB with one ear with the context root 'store', the URL to access these sites can be:

    siteA url: / store/siteA,.

    siteB url: / store/siteB

    I too have a doubt why production url contains conext root?

    * virtual url because these urls is not defined in the web.xml file, if encountered ATG SiteManager will be responsible for process applications.

    Thank you

    Nitin.

  • The unusable software, but no explanation

    In good faith, I bought Adobe Creative Suite 6 Design Standard Student & Teacher Edition, details of entry online, etc. and waited to hear.

    The trial period is over with no news, information or any response at all, but after 30 days, a threshold of operation of the program - so presumably the ID I had was not good enough for Adobe.

    I would have missed the product if I didn't think that I was a teacher of good faith, but if Adobe need more checking my status, why don't they ask?

    And if I can not use it I send a student friend. Can I do so that they can save it for their own use?

    If I can't get any use of this software at all, can I get a refund? This is currently my favorite option!

    Moved to this discussion in the forum student and Teacher Edition Information.  Anotherbloodyname please see http://forums.adobe.com/message/4635085#4635085 for more information on how to check the status of your application.

  • [HP 11.1.2] Missing products EMP in the workspace menus

    Hello

    I just installed EPM on our test server, everything was fine, except that when I open the workspace there is only the menu Administration.
    Of course, I already checked the settings of the workspace, but the list of "Enabled products" is just empty.
    I also tried to set up the Web server + redeploy all the components, but it did not work.

    Anything else I might have missed?

    Thank you
    JM

    First re - run your tasks "Set up logical Web address" and "Set up the Web server" and restarted the system. You should see port numbers for each application installed on the stage of logical web address - if you see applications out there are indicates Shared Services don't think that they have been fully installed.

    Then, run the EMP System Diagnostics.

    Then try the below URL, receive you login screens?
    http://servername:19000/HyperionPlanning/logon.jsp
    http://servername:8300/HyperionPlanning/logon.jsp

    Then view the log files of services to the:
    \Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\

    Kind regards

    John A. Booth
    http://www.metavero.com

    Word forge.

  • That means "missing product Configuration"?

    I downloaded firefox. I did the 'RUN' of the set-up file. It will not be implemented. I get "Missing product Configuration". I am running Windows 7.1.

    Try this:

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test in the case where a security software comes in.

  • Buttons to the left of the URL are missing.

    I accidentally did something to make the buttons 'Coffee Morning', 'Web of Trust' and 'Readability' gone to the left of the URL that is in the 3rd line horizontally to the browser (i.e. line 1 is orange "Firefox", line 2 are tabs that are currently open and line 3 is the current URL over the engine small google search and 'Home' button and 'View bookmarks' buttons on the right.) Originally, the two buttons on the right had disappeared, but I understood how to bring back them. But the URL line to the left, to remove the buttons at the top of this post. Any help appreciated. Thank you. -Paul

    Open the Customize via "view > toolbars > customize.

    If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar

    If you do not see the items on a toolbar or in the toolbar palette, then click on the "Restore default" button to restore the default toolbar set up

    This can also be a problem with the localstore.rdf file that stores the toolbar customization.

Maybe you are looking for