FSX and activation

Similar Questions

• FSX doe to not work after installation and activation on xp 64

  • problems with fsx deluxe
  • Windows xp prof 64 bit
  • tried to reinstall software
  • When you click on the shortcut on the office splash screen appears the landscape of loads of objects then disappears
  • did have problems in first installation with activation key after 2nd install called from new activation, installed and active fsx ok code but does not start a short cut
  • should I try a disc format hard costs re - install of xp64 and fsx installation costs

  Hello

  Have you installed any 3^rd party application (aircraft) and/or you are running one of the game Add-ons.

  You can also check if DirectX update allows you to play the game.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

  Also make sure that all drivers are updated to your computer.

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• FSX and FSX acceleration not will not activate after the uninstallation and reinstallation of the following problems with Windows 7 upgrade

  After the upgrade to Windows Vista Ultimate SP2 Windows 7, I couldn't FSX to load.  It would hang at the splash screen.  This has since been resolved and may have been a conflict between my card graphic and sound card and maybe even my webcam.  I then tried to reinstall FSX.  However, I decided to load up the Accerleration as before, but when I entered the activation code it says after trying that he could not get an answer to the server and to verify that I had an internet session active.  I did, but he always refused to activate.  So I uninstalled FSX acceleration and ran repair on FSX.  But now, he wants the activation code for FSX and when I write this so I always get the message that it cannot get a response from the server, please try again later or check that your internet connection is active.  I have the full internet connection, but doesn't understand why it won't save my activation codes.  I am limited to 30 minutes and cannot be installed acceleration as it wants the code for FSX.  I read on the forum that you can uninstall and reinstall on the same computer as many times you like then why used enable it?  It seems that he doesn't like my internet connection even though I am on the internet.  Anyone has any ideas. My pc is a Dell Inspiron 530 s with Nvidia 9400Gt card and card Soundblaster with 160 gb 1.66 ghz, 4gig ram and router Netgear WGR614 cable wireless

  Hi steve, I managed to install in the end.  I upgraded to a hard drive more that I wanted more space and copied the image to the new drive.  FSX is not yet accept the keys during the installation.  I ran the above utilities (see blog Amritas) to clear the license keys, empty temporary folders and change the registry entry by using 'regedit' on the command line, but still his wouldn't.  In the end, I installed and uninstalled three times until I finally installed it on a partition on the drive and he finally accepted the license keys.  This was done on the original admin user account that I had problems with from the start.  I have now it works.  The utility I used was KB928080 Microsoft.   I can only suggest you keep trying or partition of your hard drive and try and install on the new partition after erasing the license keys and temp folders (see above Amrita).  I can't guarantee that it works well.  To me it's a question of licenses i.e. acceleration has been uninstalled and reinstalled many times so it will no longer accept the license keys.  Happy installing! I don't know how is it frustrating.

• How to make a backup of the health and activity data?

  Hello

  I would like to do a fresh install on my iPhone version 6s 9.3 to 9.3.2. My question is how can I save only the data of health and activity?

  I couldn't find any option in iTunes or iCloud backup specific applications. Please notify.

  -Salah

  Hi Salah

  It is not currently possible to only back up data of health and activity through Apple backup and restore process.

  Health and activity - as well as other sensitive (like password) information - data are included in encrypted iPhone backups.

  It is possible to exclude these data from a backup (by a backup encrypted United Nationsvia iTunes), but it is not possible to only backup and restore sensitive data.

• I downloaded cookie controller. It's in and active but WHERE? I can't find it!

  Firefox said in email today that the cookie controller is a good add-on. OK, so I downloaded and activated, but please tell me Mr. Ed developer, where I can find it in the computer? I'm looking for the buttons and so on. Tricky this one. Let's call it the riddle of Cookie. Maybe my intelligent computer knows I always check my cookies before closing down and get rid of those I want to follow me. Come to think of it, maybe I don't really need.

  Seems the Cookie controller extension to add buttons to the toolbar of the modules (Firefox > Options) or possibly another toolbar.
  
  You may check this by opening the window customize.

  See the screenshots here:

  • https://addons.Mozilla.org/en-us/Firefox/addon/cookie-controller/
  • http://KB.mozillazine.org/Toolbar_customization
  • https://support.Mozilla.org/KB/back+and+forward+or+other+toolbar+items+are+missing

• Small color wheel keeps going in a lot of time and activity stops.  What is the problem and you have to?

  Chromatic wheel keeps going of and activity stops.  What is the problem and the solution?

  You meet the SBBOD (the spinning beachball of death).

  This means your MBP is trying to make his way through some task or tasks that he doesn't have sufficient resources to effectively or if you have a software problem that interferes with the efficient completion of the task (s). Common causes on this discussion:

  1. "antivirus" software from third-party manufacturers
  2. different types of cleaners 'misguided' and other dreck (for example, CleanMyMac, MacKeeper)
  3. trying to run too many processes for the hardware you have.
  4. Insufficient RAM for the processes that you try to run
  5. Hard drive that is too full
  6. CPU or hard drive that is too slow for the software you are trying to run.
  7. hard drive that is running out.

  Download and run Etrecheck http://www.etresoft.com/etrecheck and send the output to an answer here, and we can take a look and see what the problem is.

• My iTunes card is redeemed and activated, but it does not allow me to buy music, why?

  My iTunes gift card has been validated, redeemed and activated for $ 25, but it still won't let me buy a song for $1.29, why?

  Sesame thing going on as well for me. Don't buy pack for war game.

• List of open and active/Windows Forms displayed within Windows XP 7 v/s windows on the right by clicking on the name of the application in the status bar

  Salvation OR,.

  We found that the list of forms/open windows displayed in Windows XP (on the right by clicking on the name of the application in the windows taskbar) seems to indicate all open and active windows/forms in the application.

  We would like to know how to enable the same functionality in a Windows 7 environment. The best we can do now is to double click on the name of the application on the windows taskbar to switch between active windows/Forms in the application. We would like a menu similar to the windows XP appearance about running on Windows 7 when it comes to this particular feature.

  Thank you and best regards,

  -Ashish

  The taskbard has changed significantly in Windows Vista and 7. You can get a similar functionality to what you call by customizing the taskbar in the taskbar properties. In addition, now press SHIFT key while right-clicking to display a menu similar to what you show in your screenshot, except that it does not display the name of the element. In Windows 7, the feature make you is typically done by hovering over the icon in the bar tasks and selecting one of the points of view which appears above the element.

  You can use the Windows shellapi to do a limited customization of the task bar, but this API is very difficult to use and I would not recommend this approach.

  CVI provides a method to change the name of the item in the taskbar (see this KB), but it does not add the name after the restoration in the context menu.

• FSX with acceleration gold Edition starts now when I upgraded to Windows 7. It happens just with blue logo start FSX and crashes.

  I ran FSX with acceleration gold edition on my Dell inspion 520 with Windows Vista Edition home premium SP1 and 2 and it worked very well.  Now I updated to Windows 7 Home premium and it just hangs.  I uninstalled FSX and acceleration completely and even delete the directories and given it a clean install.  It seeks to build the database markings and landscapes, and then I let myself just with blue logo start FSX and even after a few hours, nothing happens. It would help if she had an error message, but nothing.  I have also reinstalled the driver for my NVIDIA GEforce 9400 graphics card and checked DirectX and its says its fine.  I have dual core 1.66 32-bit with 4 GB of ram.  Someone has any idea how to solve what Miss me my vol. I tried also to start with compatibility for Win Vista SP1 and 2 settings, as well as Win XP.  I can't get my WinTv Nova-t work either which suggests that it is a graphics problem.

  Hi AMrita,
  I always had the problem last night but I was check the forums and I now after much deliberation to be fixed.  When I go into the Device Manager, I checked all the drivers including the audio player and I was informed that they were all updated and works very well.  Although I had sounds and music I check the setting in 'Control Panel', but this is no software not loaded and nothing is even not a mistake.  I then tried to download the latest software and driver from Realtek for Audio ALC888 and got the following error while installing - an error (-5009: 0x8002802b occurred) previous installation did not finish.  On Googling this error I found a solution in one of the forums that was as follows: to

  Delete C:\Program Files\Common Files\InstallShield\Professional\Runtime - folder or rename it, just in case.

  and then run the windows 7 install for the sound card Realtek and it is now successfully downloaded.  The PC restarts, I started FSX and now its running fine.

  Thanks for the help... got in the end and think I could play music and watch a movie and the sound was very good.

• Win 7 was just installed and activated.

  My computer shuts down on me whenever I do not use it for a little bit. This problem just started. I have windows 7 installed and activated, it about a week and a half ago. Now its telling me I need to save files, and get another copy of Windows 7. What is going on?

  Windows Update has nothing to do with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• diagnosis indicates ftp (passive and active) can not find the server

  C:\WINDOWS\network diagnostic\xpnetdiag.xml says I can't connect to internet because

  "Warn FTP (passive: and (active) error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established.). "How can I fix? I downloaded internet explore for Windows XP a few days ago and never got on the internet with it.

  A few days ago, I downloaded internet explore for Windows XP...

  Please explain.

  You will find support for your Windows XP connection issues in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking

• During the installation and activation of google chrome, I lost my taskbar

  Original title: Google Chrome

  during the installation and activation of google chrome, I lost my taskbar. How can I reinstall my taskbar?

  Hi Frank,.

  1. do you receive any error messages?

  2. have you restarted the computer once installed google chrome?

  3. not this problem occurs when you run a specific program or out of order?

  This problem can occur for the following reasons:

  • Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
  • Your user account settings are corrupt.

  Method 1: Make sure that the hide option automatically is not selected for the taskbar

  To determine if the hide option automatically is not enabled for the taskbar and Start Menu properties, follow these steps:

  a. press CTRL + ESC.

  b. If the Start menu is displayed, click on the Start menu and then click Properties.

  c. click on the task bar , clear the Auto-hide the taskbar option and then click OK.

  If the problem persists, you can proceed to method 2.

  2 method: Recycle Explorer.exe

  Try to recycle Explorer.exe by opening the Task Manager (you can use Ctrl + Shift + Esc), selecting explorer.exe in the list and choosing end process.

  Now go to the file menu, choose new task and type in Explorer in the Open box. Press on enter and explore should restart itself.

  Check whether the taskbar is visible now.

  Hope this information helps. Provide more information so that we can help you.

• Security Center Windows is no protection against the virus, even if my anti virus program is microsoft anti-VRUS and is updated and active

  Why Windows Security Center says no virus protection even if my anti virus program is Microsoft Anti-Virus and is updated and active? Check the simple and easy answer to the user.

  Why Windows Security Center says no virus protection even if my anti virus program is Microsoft Anti-Virus and is updated and active? Check the simple and easy answer to the user.

  Unfortunately, we are beginning to see occasional reports on the MS Community forums of such behavior involving MSE and Security Center - usually, but not always involving XP.

  See the response of Reallyoldguy in this thread - maybe his fix will work for you: http://answers.microsoft.com/en-us/protect/forum/mse-protect_updating/security-center-reports-microsoft-security/9de04320-fc8f-4f57-bb87-192be2d29b22

  If the MSE icon is green then you should be protected and cannot ignore thisSecurity warning center. The question seems sometimes resolve spontaneously after a few days.

  BUT

  You may want to consider the following threads:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/Ive-Windows-essential-and-is-showing-me-my-PC/c76fc125-c21f-46a9-8B9F-c9b1311171b1

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_updating/Security-Center-message/558e1220-9f21-4e6c-Be92-ddcc65d36c0c

  Kind regards...

• How xp can be disabled so that it could be reused and activated in another machine?

  Original title: activating xp

  I have xp installed on a pc that is currently being discarded. How xp can be disabled so that it could be reused and activated in another machine?

  There is no process to 'disable '. If you have a retail version, you should be able to re - install without problem. If it is an oem version, what you are proposing to do would be not legal.

  Tricky

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.