Mix single vCPU with Mutiple vCPU VMs VMs

Similar Questions

• single vcpu?

  I heard in the past that it is better to start with a single vcpu for your virtual machine because of the way that ESX round robins the cpu cycles.  So if an app really needs a second vcpu can add.  Is this still the case with esxi 4.1?  I'm vcenter install on a VM right now with 4 GB of ram, 1 vcpu and currently the facility contains the vcpu to 100% most of the time.

  Hello.

  I heard in the past that it is better to start with a single vcpu for your virtual machine because of the way that ESX round robins the cpu cycles.  So if an app really needs a second vcpu can add.  Is this still the case with esxi 4.1?

  Yes, it's always the case.

  I'm vcenter install on a VM right now with 4 GB of ram, 1 vcpu and currently the facility contains the vcpu to 100% most of the time.

  The VM vCenter installed on requires 2 vCPUs to be a supported configuration, so I would certainly go ahead and add the 2nd to it.

  Good luck!

• How can I scan a document with mutiple pages into a single file?

  Hello

  I have a HP 3070 and Windows Vista. The printer and scanner are properly configured. But there's something that intrigues me:

  How can I scan a document with mutiple pages into a single file?

  I start the HP scanning software and choose pdf or tif format. The analysis of the option of single file for each page is unchecked. Once I scanned the first page it has no option to scan additional pages? I got back, save and

  Thanks in advance

  Hello

  The HP software disables scanning multipage when the resolution is greater than 300 dpi. The resolution of the issue is to reduce equal to or less than 300 dpi scanning resolution.

  Thanks and greetings

• Cannot retrieve host associated with a substituent VMs

  Hi guys.

  This is my setup:

  vSphere 5.1

  Main site (Production)

  Cluster, 7 guests.

  Compellent primary storage (with the Manager of the own company compellent).

  vCenter own VM

  a few replicant vms (with a server of domain names).

  Secondary site (remote)

  Cluster, 3 guests

  Secondary Compellent storage (with the Manager of the own company compellent).

  vCenter own VM.

  VM site recovery manager.

  No domain name server.

  So, when I test the recovery plan is working perfectly. Yesterday, I tried an exercise in failure:

  1 - Disconect link between the Production Site and the remote location.

  2. - connect my laptop in the Remote Site lan.

  3. - connect the vSphere Client in vCenter Secondary Site.

  4 - action for run for the stimulus plan.

  but fails when try to power of virtual machines. Error:

  Error: Cannot retrieve host associated with a substituent VMs. The connection to the remote server is down.

  There is something wrong with my setup, but why? I do not know. I check and rechek but I don't see the wrong configuration.

  Plese help. Any suggestion will be appreciated.

  Another question.

  My direct area on Site of Production secondary and primary servers. Is good practice developed a third active area living in a Remote Site Server?

  Greetings.

  Reason: this problem may occur if a virtual machine with the same name as the virtual computer space reserved already exists in inventory of vCenter Site Recovery SRM.

  To resolve this problem, try one of these options and make sure that there is no conflict of virtual machine name:

  1. change the name of the virtual machine that requires the protection of the protected Site.

  2 If the virtual machine on the recovering Site is necessary, change the name of the virtual machine for recovery Site.

  3. If the virtual machine on the recovering Site is not necessary (perhaps because it's an old placeholder virtual machine or a virtual machine created by mistake), remove the virtual machine from the inventory.

• Had issue with DSL service, now have only a single tab with favicon for this tab.

  After a storm, I had a problem with my DSL U-Verse. I lost access and received a message it may be due to a problem with the filters on my phone, fax or satellite. I unplugged all the elements that have filters. I was then able to click on a link that AT & T had sent the message and I got an answer, I previously could not answer because I had no connection. I got the pack for pages on all my tabs by pressing the arrow to the left on each of them. I now have a single tab with favicon for this WEB site for that tab, the others all have the AT & T globe. I tried refreshing and also open a new tab and then go to any sites.
  This problem is on another PC than the one I'm on now. It has the version 21 and is Window 7 Home Premium. I pasted the info from this PC troubleshooting.

  I restarted Firefox, and returned the favicons. Thank you.

• How can we do a single element with the content of two clips

  How can we do a single element with the content of two clips

  You try to get a picture of image? In other words, that contained two visible clips at the same time? If you are, change the substantive item to you main plot and another tie on top using an edit connect to the battery. Select the top item. Activate the transform tool and resize and reposition the clamp if necessary.

  Russ

• When I single click with my mouse, it acts as a double click.

  original title: problems using the mouse

  I have several mice, and two laptops have problems with a trigger single action, with everyone having one with XP and one with Windows 7

  The point is that with a simple click choose them and this is not happening, sometimes (often) the action is equal is two clicks.

  The tools that I chose the option of two clicks, not one click.

  From the uninstalled software mouse (Logitech), but the problem remains with or without the application.

  Any idea or opinion?

  Thank you

  Problem solved by Logitech, I replace the rats and everything is normal.

• Arrow line (single line with an arrowhead) in MS Paint Win7

  Is there anyway that I can draw an arrow line (straigt single line with an arrowhead at the end) in the new MS Paint in Win7?

  The following items may be worth a visit:

  Windows 7 - paint help
  http://Windows.Microsoft.com/en-us/Windows7/using-paint

  Windows 7 - getting started with paint - tutorial
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-paint

  Windows 7 - How to add an arrow to a screenshot
  http://www.allsandiegocomputerrepair.com/693/how-to-add-an-arrow-to-a-screenshot/

• Player Windows 12 will not allow streaming on a single computer with ATT

  Windows player 12 will not allow streaming on a single computer with ATT but goes with another computer.  When streaming is selected, it refers to the administration tools.  Now what?

  Hello

  AT & T ATT are you referring?

  I suggest you refer to the following Microsoft help articles and check if it helps.

  The protocols in Windows Media Player use for streaming?

  http://Windows.Microsoft.com/en-us/Windows7/which-protocols-does-Windows-Media-Player-use-for-streaming

  Change settings for streaming media in Windows Media Player:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-streaming-media-in-Windows-Media-Player

  Hope the information is useful.

• For all the records for each record double, I need to get a single column with null or 0.

  Hi all

  I have a requirement where I need to get all the records, for each record in double, I need to get a single column with null or 0.

  create table a1

  (

  Identification number,

  VARCHAR2 (100), the point

  part varchar2 (100));

  Insert into a1

  values (1, 'ABC', 'A1');

  Insert into a1

  values (2, 'DEF', 'A2');

  TABLE A

  PART ITEM ID

  1 ABC A1

  1 ABC A1

  1 ABC A1

  DEF 2 A2

  DEF 2 A2

  3 DEF A2

  O/P

  PART ITEM ID

  1 ABC A1

  1        ABC             0

  1        ABC             0

  DEF 2 A2

  2       DEF              0

  3       DEF              0

  Thanks in advance.

  Thanks for your help FrankKalush...

  This one will work.

  WITH got_r_num AS

  (

  SELECT NVL (a1.id, a1.id) as id

  NVL (a1.item, a1.item) AS element

  NVL (a1.part, a1.part) IN the framework

  a1.id AS a_id

  ROW_NUMBER () OVER (PARTITION BY a1.id

  ORDER BY NULL

  ) AS r_num

  BY the a1

  )

  SELECT id

  element

  CASE

  WHEN a_id IS NOT NULL

  AND r_num = 1

  THEN part

  ELSE ' 0'

  END in the framework

  OF got_r_num

  ;

• web site to a single page with 6 sections

  I need to create a web site to a single page with 6 sections. How to set the height/width of the page? What are the settings that I need to start?

  You can set the width of your page in the Site properties, but generally must be the setting works well by default. The height will be determined by your content.

  

• Mix ADF Faces with HTML, JavaScript, CSS, JSTL question

  Dear all,
  
  The project is now starting to deploy to the production server. When we try to deploy to the production server who made a lot of mistake. As this used widely used project mix ADF faces with
  HTML/JavaScript/CSS/JSTL. I would like to know what are the most error when we have mixed to use each one and how can we overcome them there?
  There is in the project
  
  1 mix of tags html with ADF Faces components
  2. the use of JavaScript/CSS inline
  3. mix the JSF/ADF Faces and JSTL tags
  
  Help me how to address this issues as well as links to useful blog.
  
  JDeveloper IDE version: 11.1.1.5.0 with Webcenter
  WebLogic version: 10.3
  
  
  
  Best regards
  KT
  
  Published by: KT on May 16, 2013 21:23

  Hello

  In addition to this project widely used mixture ADF faces with HTML, JavaScript, CSS, JSTL.

  JavaScript, CSS, and JSTL is not a problem, whereas - according to the JSF version - HTML is. JSF 2 is the first version of the JSF, which allows you to mix HTML with less side effects, if you use Facelets as view declaration language.

  I would like to know what are the most error when we have mixed to use each one and how can we overcome them there?

  There is in the project

  + 1. mixture of html with ADF Faces components tags +.

  This could ruin your pages, lead to update issues and - in case of frequent use in the trees - even destroy the functionality

  + 2. online use of JavaScript / CSS +.

  Poor performance because of heavy weight pages. If you were using ADF Faces and your JS addresses the DOM instead of the architecture of client cJavaScript ADF Faces then chances are JS will fail for the components that have changed their HTML output (which has an impact on the DOM structure) or changes are not submitted to the server.

  For CSS, CSS inlineStyle not applay to the DOM element that is external, which means for example af:input the background text color will color the lavel

  + 3. mix JSTL and JSF/ADF Faces tags +.

  Dependa on how you do. JSF has postponed EL syntax, which means that EL resolves at run time, whereas JSTL resolves at compile time. So the race conditions could become a problem

  Overall, it is difficult to say if things were coded wrong in the project (although for the use of HTML you can be sure) without seeing the code. It seems that the team that built the application however did not dare to the suite of recommended practices

  Frank

• Single instance with two sons to redo

  Hallo,
  
  I have a 10.2.0.4 single Instance with 2 threads again by following query shows:
  
  Select thread #, status, active, groups of wire $ v
  
  THREAD # STATUS ACTIVE GROUPS
  1 PUBLIC OPEN 3
  CLOSED 2 3 PUBLIC
  
  
  That's because it's disk-synchronized with a RAC database, so I can not get a wire 2. (For example need recovery at startup)
  
  In any case, I noticed that the Thread 2 Redo Logs switch once all TWO Redo Log Thread 1 switch and without
  journal entry of alerts on the log command, instead of switching with Redo Logs in 1 thread.
  In other words, as archiving is, thread of Redo log 2 get archived twice as long.
  
  
  Is this expected behavior?
  
  Thank you!!!

  In the CCR, if a thread is more active than the other and switches logs frequently, it will force also a switch of newspaper to the other thread sometimes to make sure the second thread does not lag behind . This is to ensure that the repeat of the second thread also gets archived on.

  Imagine what would happen if:
  a. thread 1 is 100 000 transactions on 9 switches Journal (SEQ #101 à 109), using 3 groups
  b. thread 2 does 1 single operation without switch (still stuck in SEQ #99) unique newspaper (at some time where 1 wire was active in the #102 SEQ) and do not archive

  Restore database and recovery or a database of aid would put an end to the Seq 2 wire #99 (approx. Seq # 101 Thread 1). Cannot apply 90 000 + transactions in SEQ # 102 to 109 because Oracle does not have time to order operations, if missing redo thread 2.

  To avoid such a situation, 1 wire would be periodically (about every 2-3 switches, if there are 3 groups) force an automatic switch redo log groups of 2 wire to make sure that they get archived on!

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• IN. print - lines with Mutiple expeditions

  Hello
  
  As I said in my other post I am customizing our PO by creating a new rtf. I had a few problems and one of them is printing the ines lpo with mutiple expeditions. I my body that prints lines in. (works quite well), but some po lines have multiple shipments. These shipping details follow some of the same positions of the po line:
  
  Date promised
  Qty.
  Unit price
  
  but they print under the po line.
  
  I hope that makes sense... If anyone has any experience with this problem please let me know.
  
  Thank you
  
  Jessica
  
  Published by: Jessica on January 18, 2009 20:07

  Please check your mail and answer me

  Thank you
  Rahul

• replace a single quote with the double quotes with the function replace

  I work with one apex page, which contains a text as a filter box. If I put a single quote and find then I get the error message saying that parse error.
  
  For this, I want to replace one single quotation mark with double quotes, so this should be perfect. and apex should show the result.
  
  A allow the query to the same which will replace the single quote with double quotes.
  
  Published by: Santhosh Kumar T 15 Sep 2008 05:13

  If it was confusing... Try the less confusion (according to you)! ...

  Select Replace ("ab" | ") "|' it," ',' "') twice;"