Cannot retrieve host associated with a substituent VMs
Hi guys.
This is my setup:
vSphere 5.1
Main site (Production)
Cluster, 7 guests.
Compellent primary storage (with the Manager of the own company compellent).
vCenter own VM
a few replicant vms (with a server of domain names).
Secondary site (remote)
Cluster, 3 guests
Secondary Compellent storage (with the Manager of the own company compellent).
vCenter own VM.
VM site recovery manager.
No domain name server.
So, when I test the recovery plan is working perfectly. Yesterday, I tried an exercise in failure:
1 - Disconect link between the Production Site and the remote location.
2. - connect my laptop in the Remote Site lan.
3. - connect the vSphere Client in vCenter Secondary Site.
4 - action for run for the stimulus plan.
but fails when try to power of virtual machines. Error:
Error: Cannot retrieve host associated with a substituent VMs. The connection to the remote server is down.
There is something wrong with my setup, but why? I do not know. I check and rechek but I don't see the wrong configuration.
Plese help. Any suggestion will be appreciated.
Another question.
My direct area on Site of Production secondary and primary servers. Is good practice developed a third active area living in a Remote Site Server?
Greetings.
Reason: this problem may occur if a virtual machine with the same name as the virtual computer space reserved already exists in inventory of vCenter Site Recovery SRM.
To resolve this problem, try one of these options and make sure that there is no conflict of virtual machine name:
1. change the name of the virtual machine that requires the protection of the protected Site.
2 If the virtual machine on the recovering Site is necessary, change the name of the virtual machine for recovery Site.
3. If the virtual machine on the recovering Site is not necessary (perhaps because it's an old placeholder virtual machine or a virtual machine created by mistake), remove the virtual machine from the inventory.
Tags: VMware
Similar Questions
-
Cannot find "" keys associated with certificates to create certificates p.12
Hi there, hope you can help. Eager to create Distribution certificates & developer p.12. Went through procedure at the point of a double click on "ios_development.cer" and "ios_distribution.cer" to install in Keychain Access.
I see that these certificates are in Keychain Access under System'Certificates.
However, Keys 'System' the relevant keys do not exist. And in Login 'Keys' there are 4 keys that might be good: 2 public keys, 2 private keys. BUT they do not have an arrow on the left so I do not see if the correct certificate is associated with them (as described in the step by step guide to DPS pg19).
Mac currently on 10.6.8 so I have not yet downloaded X Code. Planning to improve the system of short time. When I update and install X Code, so I'll be able to see the right keys and associated certificates together in "key"? Is there something that I missed? Hope you can help, thanks.
Xcode is probably irrelevant to this issue (even if you do not want to install an intermediate certificate at some point, either individually or with xcode). If you double-click the .cer file and the swirl arrow does not appear, it means that the certificate was not imported correctly. Try using the command import in the menu. If this does not work, delete and remove any that you have created and try again. For best results, close the Keychain Access utility whenever you complete a certificate p12.
-
How will I know if a host is associated with a vCenter Server
Once my 5.0 ESXi host is managed by / code with a vCenter server, there are some commands that you can perform only through the vCenter.
In particular, all-hard drive size, whole-controller SCSI and Set-VMReservations.
In case my vCenter is down, I would leave my script (PowerCLI 5.5r1) with a mistake that these operations cannot be executed until start of vCenter or the host that contains the virtual machine is no longer active with vCenter. I think it's safe to let the user decide how he wants to move forward in this case and not build it in my script.
Is there a cmdlet to ask the host if it is associated with a vCenter Server? When you use VI Client to connect to the host, you can see the link in the lower right part of the Summary tab that says "separate host to vCenter Server...". ».
The get-VMHost cmdlet seems like it should have this info, but I was not able to find.
Thanks for your suggestions
Maureen
Please take a look to determine vCenter management host to see if that helps.
André
-
Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?
Hi stuckfree,
The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.
http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
-
Original title: this file does not have a program associated with it for performing this action... etc.
cannot open attachments to emails or some document files, like the downloaded videos or greeting cards. I tried the exe file. thing and it is already in my folder of files. Need a fix. Had this problem 2 months ago and that's where the exe. has been applied. Has worked since then until today.
Hello
1. what changes have been made to your computer before the problem?
I suggest that you follow these steps and check to see if they help.
Step 1:
If the problem occurred recently, perform the System Restore to the point that your computer was working normally.
Step 2:
Test the issue in a new user account and check if the problem persists.
-
Cannot send/receive emails with jpg inserted or associated
Cannot send/receive emails with jpg inserted or associated
Although this issue has never been resolved, I will mark it as answered just to avoid the issue of cluttering the site.
Dave
-
Original title: problem e mail
I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.
Suggestions;
1. make sure that your e-mail program is your default program.
2. make sure that your Internet Explorer, or your main browser has all its faults.
You can do both of the above by following these steps...
Start button > right column, click default programs > click Set Your Default programs...
1. click on your e-mail program > it doesn't say "this program has all its defaults"?
If not, click on choose by default for this program > check all boxes below the list > click on save when finished.2 do the same as above for your Internet Explorer, or your main browser.
-
In the last days is message that my computer is not protected by a firewall. I followed the recommendations to enable the windows firewall (both through the alert procedure and the control panel); but get message that the firewall cannot be activated because a "service is not associated with running.
I'm usually protected by the free AVG service and its protection of identity theft.
How can I recover the windows firewall?
How to turn on the windows firewall?
Open Windows Firewall by clicking on the button start , clicking Control Panel, clicking Security, and then clickingWindows firewall.
Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Click on (recommended), and then click OK.
If you want the firewall to block everything, including the programs selected on theExceptions tab, select theBlock all the incoming connections checkbox.
WARNING: More than a firewall running at the same time program could lead to conflict. It is best to use a firewall program.
If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Cannot change the host associations groups
Hello:
I'll put up a cluster with two nodes with two Dell servers and a MD3200 with two controllers. Each server has two SAS HBA, each one associated with each of the SAN controllers for redundancy.
I stopped with a problem stupid aparently that not let me complete the Setup, and I need urgently finish it.
The problem is that the 1 server is automatically asigned to the default group, and I tried to do a second group specifically for the cluster. I manually assign Server 2 to this group, but not way to assing server 1 also, so I'm trying to desassign server host cluster group 2, to assign it to the default group, but I can't find how. Now I have 1 server bound to the default host group and Server 2 in the clsuter group. All the options to manage, change or assign specific hosts or groups are disabled, and I can't configure the cluster.
I think the problem is that access virtual disk (automatically generated by the software) is attributed to groups of two hosts, so I can't delete the second cluster group, if both servers are assigned, and the software doesn't let me do anything.
Management software version is 10.84.G6.44 (latest version) and host is Windows Server 2012.
Need urgent help. Thanks in advance.
Finally solved reseting CLI configuration
-
Cannot open any desktop shortcut, get this message: this file does not have a program associated with it for performing this action. Create an association in the folder option control panel > can't open anything in the control panel. And when you try to download patches get message saying "microsoft cannot find the file. Tried to copy the 'rundll32.exe' file in system32 but does not work, can not even open the clock! Help, please.
http://answers.Microsoft.com/en-us/Office/default.aspx
Office at the above link forums
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
cannot update, uninstall or new installation of itunes and the programs associated with lack of msi files
Hi kenau78,
a. this problem during installation?
b. you install an iTunes 32-bit version or 64-bit?
c. What is the CPU architecture, 32-bit or 64-bit?
I suggest you to contact the Apple support also, because the problem is with iTunes, from the link given below.
You can also ask your question in the discussion forums Apple from the link below.
Concerning
Arona - Microsoft technical support engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
"I have Win 7"Windows Fax and Scan " running on all my computers from client domian. Security for each user on the domain is configured to contain MS SBS 2003 Active Directory security group 'operators of Fax.
Windows Fax and Scan starts and reads the Fax Server Inbox perfectly, however, I get an error message whenever I start a new fax.
"Unable to retrieve pages of coverage associated with selected account.
Evern after I added a cover Page to each client the same error appears.
Any ideas out there?
Tom Grundy
If you open Windows Fax and Scan and click on tools and then click Fax accounts, there is an option to remove all the accounts listed. After you have done this, you can configure a different account.
You can try uncheck Windows Fax and Scan via Control Panel / programs and features / turn Windows Features on or off / printing and document Services / Windows Fax and Scan. This allows to uninstall it. You restart and then reverse steps to reinstall.
Configure your computer to send and receive faxes
http://Windows.Microsoft.com/en-AU/Windows7/set-up-your-computer-to-send-and-receive-faxesFax and scan Windows
http://Windows.Microsoft.com/en-AU/Windows7/products/features/Windows-fax-and-scanThe location setting you mention could be a location tab, which is available by right clicking and selecting Properties on some of the user folders. The folder at this location, for example. C:\Users\Usernamexxxx
You must correct any problems with your Fax Modem, before you can do a lot of fax. Maybe deleting and reinstalling that will help or verification of the Windows 7 drivers?
-
I have a new subscription to creative cloud, which is paid, received a Bill and I have an account. When I launch Illustrator, so I can only use the trial version. A pop-up window Adobe says that it cannot find any subscription associated with my identification code Adobe what can I do to change this?
Hello Hans,.
Please check the help below document:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
Kind regards
Sheena
-
Cannot find a record of product associated with your e-mail address
I get the message "Cannot find a product record associated with your e-mail address" when I try to access the "free Benfit" Adobe has sent to my email they do not find after that I registered the product. It still tells me "If you think this is incorrect, please contact Adobe customer support." At this point, I'm lost.
This isn't a typical requestion. Contact Adobe customer service. We are other users and can not help you.
800-833-6687 Monday to Friday, from 05:00 - 19:00 PST
-
I cannot select table jump extensions associated with lost data files?
Hi ~.
I need your help to recover my database.
I use oracle 9.2.0.8 to Fedora 3 with mode-archive.
and I have no backup.
Last night, I have experienced hard drive failure.
I tried the recovery at the level of the BONE, but I lost some data from the tablespace files.
in any case, I wanted to recover my database without the data of lost data files.
then, I published 'drop alter database datafile offline' and
Start the oracle instance.
But, data files were not eliminated from dba_data_files view and
extensions associated with lost data files were not removed from dba_extents view!
Query a selection table containing extensions associated with lost data files.
I have "ORA-00376: file xxx cannot be interpreted at this time" message.
So, my question is that...
HOW CAN I SELECT TABLE WITHOUT EXTENSIONS RELATED TO THE LOSS OF DATA SCANNING FILES?
Thank you.Hello
Without being in archivelog and without backup, can't make any sort of recovery. This is why the backups and archivelog are so important.The offline data file command never actually drops the data file. It simply tells the control file now the tablespace of the said is also abandoned. It refreshes not any notice that the files are not supposed to be used or shown more than you.
What documentation is the recovery of the database in the mode NoARch.
http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/osrecov.htm#i1007937Do you need a backup in order to recover the tables being played. Oracle is not have all the features that can currently out / skip missing extensions for you and you can read the data without them.
HTH
Aman...
Maybe you are looking for
-
How long they durent photos on a locked phone
Hello Today I came home to realize that I just left my iphone 6s at home of my Nana. I don't rely on my phone as much as other people might so I'm not really in a super big rush back, but I don't forget things. Today, I took some photos of embarrassi
-
is there a fuse for this laptop? is the computer pavilion dv6-2150us laptop
is there a fuse relpaceable on or near a pavilion dv6-2150us motherboard
-
contacts personal deleating added to my list without my knowledge in my additional contact list some how * Associates contacts are added (so far} without my knowleger - I would delete them and other old contacts but I can't.) P.S. I never opened or c
-
Original title: VIRTUAL SPACE I regularlu get the message: you are low on virtual space, msn is expamding for you. If you need more information, see Help. HA! Nothing in the search for help and receives nothing. Old running XP on hp 8-9 years.
-
Lights of blackBerry Smartphones Notification does not
For some reason any light notification on my Blackberry Pearl 8220 stop working. At the same time, I had a blinking light when a text message was received, and now what is happening is no longer. I have searched all the options, but cannot find a set