mixed formatting variables in RH7?
My client has a Submodule with a mixed format name, for example "Sha-BANG"(with the second part in italics in the case who does not appear). I don't see a way of formatting part of a variable in RH7, although I read it is possible in RH8 - does anyone have ideas how to efficiently enter this term throughout the project?
Hi argus08,
Formatting (style) is part of the definition of the Variable and is independent of the variable itself, it gives you freedom to have different formatting based on the value, but this feature came in RH 8 and I fear in HR 7, you cannot apply formatting separately on the definitions.
Tags: Adobe
Similar Questions
-
You can mix width variable shots?
I use Illustrator CS5 and cannot mix features of variable width in Illustrator. I can't do that even with the same profiles in width unless they are developed. I couldn't find questions similar to this topic on the net, but dream to double check before I made the necessary changes. I'm a little confused because Adobe 'help' shows how powerful blends of objects are, but we cannot have them like the strokes?
I want to keep the mixture as shots do not increase them. What is the best way to see how the mix will look like a width to increase and then "undo" a bunch of times.
One more quick question, but is there a quick access key to extend the mixture without entering the object-mixture-develop? I guess I could create a keyboard shortcut to expand appearance?
Thank you!
You can mix them, but it is necessary that initial objects have identical profiles and the weight of the race.
As soon as you change the profile or the weight of the race into the mix, it does not work as you expect.
Probably just half-baked.
-
Hi all
I have a variable called beginDate. It stores the value 01-07-2012, 2012-07-31.
Now, my requirement is I need display the value in the report as 07/01/2012,07/31/2012...
I tried the below a it gives the value 07.
<? xdofx:substr($beginDate,6,2)? > output is 07.
but, when I tried concatenate using the he throws under syntax error... oracle.xdo.XDOException: java.lang.reflect.InvocationTargetException.
<? xdofx:substr($beginDate,6,2) | » /'|| substr ($BeginDate, 9, 2)? >.
Please can someone send me the syntax how to achieve my requirement...
Concerning
Hi all
I found the solution... The logic below has worked...
Concerning
-
Formatting a variable Date value containing presentation
Hi all
I created a dashboard command prompt by using a date field and used a presentation variable to store the value of the field date and passing to a report. I want to do an advanced search in the report rather than simple filtering based on the line of dashboard.
When I get the value of the variable of presentation in the report, it as DD/MM/YYYY and string. When I try to mount this Date / timestamp object, it throws the error message indicating that the system if he waits to DD/MONTH/YYYY format (LUN is JAN, FEB etc instead of 01, 02 etc.)
I'm looking for so a way to fit the date field in the prompt to MON/DD/YYYY dashboard so that I can throw directly into the report for any use. I would like to avoid making mainpulation chain with complex if the instructions to convert the MM and MY format in the target report
Appreciate your help
-John CRMITVinciane,
This link has been posted before, but I thought I'd share with you once again: http://download.oracle.com/docs/cd/E12096_01/books/AnyUser/AnyUser_Requests11.html
In this paper, he describes this as the variable format: @{variables.
} { } [format] where the value and the format are optional. In addition, you can find out more about the formats here: http://download.oracle.com/docs/cd/E12096_01/books/AnyUser/AnyUser_Format8.html
I don't have the chance to test it, but maybe this you will get to be.
Thom
Published by: Thom L on April 14, 2009 09:12
Published by: Thom L on April 14, 2009 09:14
-
I use microsoft picture it, version 2000. This software has been a recurring problem, first of all just slow down my computer when saving a photo, now not even open. I have over 3000 photos saved in this version. What should I do, Ken
FWIW... MS Picture It! 2000 is an obsolete program and will continue to cause problems, even if you manage to find a way to run it. If you have the original install CD... It may be interesting to try to uninstall/reinstall the program, but there may be problems if you are running Internet Explorer 7 or 8. You can also try running them in Compatibility Mode for Windows 2000.
I would certainly create a system restore point before uninstall/install any software.
I can only imagine that you have saved your pictures to .mix format which is not compatible with other image editing software.
IMHO... your best bet for the future would be to convert the .mix in .jpg or .png format files so they would be compatible with current image editing software.
There is always a trial of 60 days of MS, Digital Image Suite 2006 download. This software will be compatible with your .mix files and using the MiniLab you can batch convert them in .jpg format. (the number of files that you can convert at any given time will depend on your system resources I'm guessing 50 might be a place to start)
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Microsoft Digital Image Starter Edition 2006
http://www.Microsoft.com/downloads/details.aspx?FamilyId=7C3B3DED-A15F-48C5-B724-7796FE8C151E&displaylang=enAnother option...
If they are single image files created in
MS Picture It! and aren't projects in layers...
(pages album, greeting cards, collages, etc.)
the following information should be helpful to you:The evaluation version of PolyView may allow
lot to reformat your bigger .mix files
quantities.You can download an evaluation copy to the
following link:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)PolyView
www.Polybytes.com
(Go to...) Downloads / PolyView 4.43 Setup
Program)When you open PolyView... go to...
File / Format Conversions...Navigate to the folder that your .mix files
recorded in and open the drop window and
Choose "All Files".On the left, click on the button "add all".
On the left, click on the button "continue"...
Choose your JPEG Format 'Destination '.
Choose your JPEG quality... 100
Choose a 'Destination folder '...
Left click on the button 'start '.
Good luck...
-
How do I convert old Microsoft Picture It (.mix) .jpg files or another type of popular photos?
Betty,
I tried to find a solution and had to get PhotoDraw installed on my old XP computer instead [the only OS that I could install on]. The mix format was abandoned after PhotoDraw / Picture It.
To save you some effort, here are the tips I found for the search for alternatives as well as possible solutions that I wasn't able to make it work [but others claimed to have done it].
http://www.Microsoft.com/en-US/Download/details.aspx?ID=4357
http://www.XnView.com/en/download.html
http://www.MakeUseOf.com/answers/convert-mix-files-jpg-Microsoft-Word/
It is at this time that I realized that I can't find a viable solution and dug an old XP computer instead.
-
Trying to open the old images as .mix need a program to help out me...
I have two drives with images saved in the .mix file. I currently need a program that I can download that will recognize the .mix file so that I can get the re-registered in .jpeg format. Does anyone know of any file of this type. I've been to the site Web of Mircosoft and they no longer use Picture It, which is what I used ten years ago to save these pictures. Any help would be appreciated thanks.
Hello
It seems that you have more than one option to convert the. MIX files. Here are a few links with some good suggestions such as using a program called "PolyView", "Microsoft Digital Image Starter Edition" or "XnView.
How to convert images saved with the image of microsoft it (.mix Format) that can be used now that the computer image produced have been replaced by windows live photo__:
http://social.answers.Microsoft.com/forums/en-us/wlmedia/thread/7395c670-c87b-4f98-b2a8-e59c00b07fadHow to convert Microsoft Picture It! MIX files?
Read more: http://www.brighthub.com/computing/windows-platform/articles/90737.aspx#ixzz1DwV6qak3How to convert. MIX files. JPG
http://forums.techarena.in/Windows-software/1188895.htmRamesh Srinivasan . The Winhelponline Blog
Microsoft MVP, Windows desktop experience -
Var JS format within the JS with CF service!
OK - I'll try and explain:
I want to use CF (MX6) to format variable inside a function js js:
for example:
< cfoutput >
< script language = "JavaScript" type = "text/javascript" >
function formatSomething() {}
var something = "#DateFormat('02/04/06','dd MMM yyyy') #";
Alert (Something);
}
< /script >
< / cfoutput >
Now it's ok if I hardcode the value of "something". What happens if I want to move 'something'?
< cfoutput >
< script language = "JavaScript" type = "text/javascript" >
function formatSomething (something) {}
Gisèle var = "#DateFormat('"+something+"','dd MMM yyyy') #";
Alert (somethingElse);
}
< /script >
< / cfoutput >
Of course, this does not work! -Do:
var somethingElse = eval ("#DateFormat('"+something+"','dd MMM yyyy') #");
Gisèle var = ' #Evaluate (DateFormat ('"+ something +" "," dd MMM yyyy')) # ";
Gisèle var = eval ("#Evaluate (DateFormat ('" + something + "","dd MMM yyyy')) ' # '");
It's not specifically the dates either - I just want to know if it is possible to do it somehow?
I am currently looking at opening a child window off the screen to do what I want, and pass to the JS function, but it looks like a urrggggghhh how to...
TA for any help...It is possible. Set your var cf before the body html tag and run your js function in the body onLoad event handler.
-
I put my button icons in a signed gif, and they work fine when running.
The problem is at design time, I can't display their icons properly.
I have to convert the GIF to ico and place them in a folder referenced by the UI_ICON registry variable old.
Also, since gifs are 16 x 16, they are harvested at the time of the design, because I see them as if they stretch to size 32 x 32.
At least, it would be enough, if I could place the gifs directly somewhere, without conversion to ico.
It seems as if oracle did not put all development work in the generator, which is like a direct version 6i c/s port.
Since you don't mention exactly what forms version you are using, I guess that and I guess it's one of the many versions after 6.0.8. The 9.x + Forms Builder supports gif, jpg and ico files. It does not however read of a jar. Therefore, you have to extract to a directory defined by UI_ICON. In addition, the files must be of the same type (jpg, gif, ico). Mixing formats is not recommended or supported. The format of your choice can be defined in UI_ICON_EXTENSION
So, for example in your registry, you might have something like this:
UI_ICON = C:\myImagesDirectory
UI_ICON_EXTENSION = gif
"Gif" being the default, there is no need to set this if you use "GIFs".
-
The site I use to invest (Royal Bank of Canada investment Direct) now does not correctly the data in a table like format (variable number of lines). A larger size font is used which often causes wrap around. In one case, a table is now given a manufacturing rather dark gray background fearing difficult.
Two versions of FF have now the problem - it seems that maybe it's just a setting, but I couldn't see anything obvious.
I would avoid all reset if possible.
I seem to have stumbled on a solution purchase that goes back to the first proposal and try some variations.
The default value for the default font is 16. (Parameter: font.size.variable.x - West)
When I put at 14, the problem disappeared. Weird!Thank you all for you help and suggestions of things to look at.
-
Hi guys
the attached picture shows one of the examples provided with labview software and I need to understand its function to achieve a purpose in my mind.
I was wondering what the (1 / x) function and why they use the function (bundle) and why they did add the elements (0.0) DBL
can anyone explain it please?
David,
Thanks for your post. The bundle name is a very useful feature when you want to mix data types. In the example that you have downloaded, you mix two variables double precision with a data type of table (which just happens to contain the double itself). The package by the name function allows to transmit data as a cluster if there are pieces of information that are related in some way.
For example - a cluster of error contains a Boolean value, a signed integer (error code) and a string. This means that you can pass the cluster through your code instead of having three individual wires for each. You can also use clusters to store sub-vis terminals; notice so how error and error take upward the two terminals of basically rather six if they were wired individually.
In addition, since you can use a beam of name there also a name unbundle so using the example of the error code if you want the Boolean value which has been adopted but not the code of error or string, then you can pull just the data in the cluster. This is often used on the inside while loops with a stop button and a Golden Gate connected to the stop condition.
Clusters are often a resource utilized in LabVIEW, but they are very very useful!
As for the 1 / x function, as with any frequency analysis one would expect it's a converson of frequency (Hz) time (s). It is not uncommon to see this feature just be careful with the factors of 2 * pi compared to angular frequency.
Hope this helps,
Concerning
-
Microsoft Picture It 2001 Gold Edition
I've reloaded the program, but may not have to work properly to open photo .mix format files-Can even not get the site to register the product again - when I try to open the image files, the program gives me an error message that it has stopped working and leaves the program. I have the 6 s full CRC Set (X 06-07500) and I wish I could get back the photos. One with suggestions or responses, I would be grateful thanks for your help,
calljay
Read the Vista Compatibiliy results above.
I think you will find that is not Vista compatible.
Cheer.
Mick Murphy - Microsoft partner
-
How do I post messages on a Web site
Hey everybody,
I was wondering if there is a way to display messages on the Web site using an application I created. I know it has to do with the API - but I was wondering how would the structure of code for such a task. I have a text input and a button that should display the message in text on a Web site. Is there anyway I can make the app automatically post to a page if I provide a URL?
Thanks in advance!
Hey Jimmy,
This code should you get. He gets a user to input a single textfield and submit its as a POST to a Web page that you provide as a URLRequest and then set up the charger with data and submit it and once it receives a confirmation email that the data has been submitted it will warn you. his code:
package { import flash.display.Sprite; import flash.events.Event; import flash.events.MouseEvent; import flash.net.URLLoader; import flash.net.URLRequest; import flash.net.URLRequestMethod; import flash.net.URLVariables; import flash.net.navigateToURL; import flash.text.TextFieldAutoSize; import qnx.ui.buttons.LabelButton; import qnx.ui.text.Label; import qnx.ui.text.TextInput; [SWF(width="1024",height="600",backgroundColor="#CCCCCC",frameRate="30")] public class RandomTests extends Sprite { private var enterText:TextInput; private var enterBtn:LabelButton; private var statusText:Label; private var loader:URLLoader; public function RandomTests() { enterText = new TextInput(); enterText.setSize(400, 50); addChild(enterText); enterBtn = new LabelButton(); enterBtn.label = "Click me to post"; enterBtn.setPosition(410,0); enterBtn.setSize(150,50); enterBtn.addEventListener(MouseEvent.CLICK, postData); addChild(enterBtn); statusText = new Label(); statusText.autoSize = TextFieldAutoSize.LEFT; statusText.setPosition(0,100); statusText.format.color = 0xFF0000; addChild(statusText); } public function postData(e:MouseEvent):void { /* * url:String will store the address to your page online */ var url:String = "http://www.rabcore.com/workshop/receivePost.php"; /* * request:URLRequest is what you send with all your variables * and data to using the loader class */ var request:URLRequest = new URLRequest(url); /* * variables:URLVariables will store all the variables you * want to submit to the webserver */ var variables:URLVariables = new URLVariables(); /* * for every variable you want to send use the * variables.[variable_name] = "string" format */ variables.showMeData = enterText.text; /* * add the variables to the request */ request.data = variables; /* * set the method to POST if you are submitting a form * type that does not have a URL query string * set the GET if you want the variables to show up * up as a url query string (e.g. page.php?showMeData=something) */ request.method = URLRequestMethod.POST; /* * set up the URLLoader object that will send the request to * the server */ loader = new URLLoader(); /* * set up a listener to check when the request has been sent and * received by the webserver using the Event.COMPLETE event */ loader.addEventListener(Event.COMPLETE, updateStatus); /* * finally send the request to the webserver */ loader.load(request); } public function updateStatus(e:Event):void { statusText.text = "Data has been submitted successfully."; /* * remove listeners when done */ loader.removeEventListener(Event.COMPLETE, updateStatus); } } }
Let me know if you need any explanation. Good luck!
Edit: Comments added to the source code
-
Wahl der Passform bzw. bestmoglichen Projekteinstellungen
ICH videos bearbeite im Format MP4 (AVI selten), die ich mit 640 * 360 (16:9), 720 * 576 (5:4) bzw. Erhalte Pixeln 1280 * 720 (16:9). Sie trunks aus TV-photographs
Sharp included material Dateien mit anamorphotischen Pixeln. Dadurch werden essential videos nach dem codieren verzerrt im Format 4:3 - auf dem Fernseher abgespielt.
ICH habe noch keine Projektvoreinstellung find können, die sharp videos auf HD - TV unverzerrt pays (directly by USB oder vom MediaServer via HDMI).
DAS Gerät Zeit sich bei der Wiedergabe nach dem Quell-material.
Welche Projekteinstellungen should ich beim upload eines neuen project use, damit ich die unverzerrt auf den Fernseher out videos?
Bin thankful as jeden brauchbaren Tipp.
If you want to play on a hd tv the project settings must be 16:9 (the 1.0 pixel aspect) and export should be with a pixel aspect ratio of 1.0
Old-fashioned 4:3 tv has a different aspect ratio: only solution would be mpeg2 in the dvd settings.
Mix formats is always going to be a pain. Especially such a range.
-
Hi guysI use this script to deploy the virtual machines automatically on esxi hosts. but I my get this erroe. Some experts can help me solve this problem.
SE connect-VIServer 192.168.
$VirtualMachinesCSV = "C:\Scripts\Deploymultiplevms.csv".
$strDescription = "Creation of the model" and CSV by Chetan Rao$VirtualMachinesDetails = import-CSV $Deploymultiplevms.csv
$VirtualMachinesDetails | % {New-VM-name $_.} Name - model $(Get-modèle $_.) (Model) - VMHost $(Get-VMHost $_.) DestinationHost) - OSCustomizationSpec $(Get-OSCustomizationSpec $_.) CustomSpec)}
$VirtualMachinesDetails | % {Set-VM - VM $_.} Name - NumCpu $_. NumCpu - MemoryMB $_. {MemoryMB Description $strDescription - confirm: $false}
$VirtualMachinesDetails | % {Start-VM - VM $_.} {Name - confirm: $false}[vSphere PowerCLI] C:\Scripts >.\deploymultiplevms_2.ps1
Name
Use of the port----
---- ----- 192.168.
443 vqaward\da_cr
Import-Csv: Impossible bind argument to the "Path" parameter
because it is null.C:\Scripts\deploymultiplevms_2.ps1:7 tank: 37
+ $VirtualMachinesDetails = import-CSV < < < < $Deploymultiplevms.csv
+
CategoryInfo: InvalidData: (:))
[Import-Csv], ParameterBindingValidationException
+ FullyQualifiedErrorId: ParameterArgumentValidationErrorNullNotAllowed, M
icrosoft.PowerShell.Commands.ImportCsvCommandGet-model: Impossible to validate the argument on the parameter 'name '.
The argument is nakedHe's or is empty. Provide an argument that is not null or empty
then try the command once again.
C:\Scripts\deploymultiplevms_2.ps1:8 tank: 75
+ $VirtualMachinesDetails | % {New-VM-name $_.} Name
-Model $(Get-modèle <<)< <
$_. (Model) - VMHost $(Get-VMHost $_.) DestinationHost)
-OSCustomizationSpec$(Get-OSCustomizationSpec $_.) CustomSpec)}
+
CategoryInfo: InvalidData: (:))
[Get-model], ParameterBindin
gValidationException+
FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom
ation.ViCore.Cmdlets.Commands.GetTemplateGet-VMHost: Impossible to validate the argument on the parameter 'name '.
The argument is nullor is empty. Provide a
argument that is not null or empty, and then try the commandd again.
C:\Scripts\deploymultiplevms_2.ps1:8 tank: 110
+ $VirtualMachinesDetails | % {New-VM-name $_.} Name
-Model $(Get-modèle $)_. (Model) - VMHost $(Get-VMHost <<<< $_.) OSCustomizationSpec - DestinationHost)
$(Get-OSCustomizationSpec)
$_. CustomSpec)}+
CategoryInfo: InvalidData: (:))
[Get-VMHost], ParameterBindingValidationException
+
FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom
ation.ViCore.Cmdlets.Commands.GetVMHostGet-OSCustomizationSpec: Impossible to validate the argument on
parameter 'name '. The argMSP is null or empty. Provide an argument that is not null
or empty, then tRy the command again.
C:\Scripts\deploymultiplevms_2.ps1:8 tank: 177
+ $VirtualMachinesDetails | % {New-VM-name $_.} Name
-Model $(Get-modèle $)_. (Model) - VMHost $(Get-VMHost $_.) DestinationHost)
-OSCustomizationSpec $(GetOSCustomizationSpec - < < < < $_. CustomSpec)}
+
CategoryInfo: InvalidData: (:))
[Get-OSCustomizationSpec], Para
meterBindingValidationException+
FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom
ation.ViCore.Cmdlets.Commands.GetOSCustomizationSpecNew-VM: could not validate the argument on the parameter 'name '. The
argument is null or- Provide an argument that is not null or empty, then
Try the ag command - Ain.
C:\Scripts\deploymultiplevms_2.ps1:8 char: 42
+ $VirtualMachinesDetails | % {New-VM-name
< < < < $_. Name - model
$(Get-Templ)ate $_. Model)
-VMHost $(Get-VMHost $_.) OSCustomizationSpec - DestinationHost)$(Get-OSCustomizationSpec $_.) CustomSpec)}
+
CategoryInfo: InvalidData: (:))
[New-VM], ParameterBindingValidationException
+
FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom
ation.ViCore.Cmdlets.Commands.NewVMSet-VM: Impossible to validate the argument on the parameter "NumCpu. The
argument is null,empty, or an element of the argument collection contains a
null value. Provide acollection that is
does not contain null values and retry the command agai- n.
C:\Scripts\deploymultiplevms_2.ps1:9 char: 56
+ $VirtualMachinesDetails | % {Set-VM - VM $_.} Name - NumCpu
< < < < $_. NumCpu-memoryMB $_. MemoryMB-Description $strDescription
{- Confirm: $false}+
CategoryInfo: InvalidData: (:))
[Game - VM], ParameterBindingValidationException
+
FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom
ation.ViCore.Cmdlets.Commands.SetVMVM-start: 07/01/2014 14:49:35 Start-VM value is not found for the
required parameter
VMC:\Scripts\deploymultiplevms_2.ps1:10 char: 38
+ $VirtualMachinesDetails | % {Start-VM
< < < <-VM $_. Name
{- Confirm: $false}+
CategoryInfo: NotSpecified: (:))
[Start-VM], VimException+
FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomatio
n.ViCore.Cmdlets.Commands.StartVM[vSphere PowerCLI] C:\Scripts >
Thanks a lot guys
Hey,.
your output is a bit long and not very readable.
But these two lines should be your first problem:
$VirtualMachinesCSV = "C:\Scripts\Deploymultiplevms.csv".
$VirtualMachinesDetails = import-CSV $Deploymultiplevms.csv
You try to import a mix of variable and file name
$VirtualMachinesDetails = import-CSV $VirtualMachinesCSV
suitable for the tip.
Tim
- 192.168.
Maybe you are looking for
-
Tree stars tab add-on Breeze bookmark features star icon
Before the latest update of Firefox (Ubuntu Linux) the tree style tab add-on worked great. Now, when I click the icon star the second time to change the location or category of the bookmark, the info box does not display edit. If I disable the add-on
-
I need to... and what is the best - battery option MBPro 2010
Hi, I bought 2nd hand a MBP 7.1 MacBook Pro "Core 2 Duo" 2.4 13 "mid-2010 Used for maybe 2 years without battery problem. Recently showing "Battery of Service" in the menu of the power. (A) I imagine things or not / can the device run more hot if th
-
Can I download and install some updates of the system?
Here, it shows updates of the system are old and it shows the old version I have and it also shows the new version, so must I download the new version and download & install over versions old or not? * Pilot your worm last worm *. * USB-enhet (samman
-
Satellite L300-1BB: sound is very blurry and sometimes interupts
Hello I just bought a Satellite L300-1BB and the sound is very blurred and sometimes interupts himself for a fraction of a second.Do you know how to solve this problem? Is this a problem with the driver? Thank you
-
I accidentally uninstalled my Sound Blaster. Is there a way to reverse uninstall?
I accidentally uninstalled my Sound Blaster, sound is now gone. Is there a way to reverse uninstall? I buy? Where?