Mixer 24 fps and 25 fps in the timeline

Similar Questions

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• CC of 2015 rubber-band layers and vertical lines in the timeline

  Greetings,

  Like many others, I feel many troubling issues with AE and first in this CC 2015 was last updated. I have a lot of problems with friction audio, audio response slow keyboard, wacky playback with a loop and being insensitive to the entrance and these preview. All of you who are on the known issues page.

  Another question I had is when I make keyframe adjustments or time to layer (by clicking and dragging them forwards or backwards in time on the timeline) they will often leap after releasing the mouse button. I can't get this repeat with regularity, but it happens... every few minutes or sometimes several times in a row. Sometimes when the timeline panel displays a different portion of the timeline, as if I did scroll up with the mouse and then wheel jumps to what I was working on a second later.

  
  

  I also have a problem with vertical lines in the timeline on playback. In this case most of the time.

  

  Here are my system specs:

  First Pro CC 2015

  Win 7 64 bit (up to date)

  I7 970

  24 GB Ram

  NVIDIA 970GTX (driver)

  500 GB SSD

  Internal 2 TB

  2 x internal 4TB

  3 TB internal

  12 to RAID 5 via USB 3.0

  USB 2.0 and 3.0 readers

  Audio device FireWire (M-AUDIO FireWire1814)... even if I'm not using it for reading. It is connected.

  Images is the H.264 files, JPG Stills, solid and no third party traffic.

  These issues are scheduled to be fixed in the update for AE which is supposed to come out in less than a week.

• Video editing in the source Panel and drag it into the timeline result in a video of the cropped image.

  I do a music video using Premiere CS6 and spin on this issue where, after cutting a video source in the Panel of the source using the brand/out tool and using the Insert command to put it in the timeline, the image I see in the program Committee is significantly cropped (I see that almost half of the video). The source file is a .mp4. Any advice?

  The you cropping experienced, it was because your pre-defined sequence does not match your images. Your film is probably 1080 and your sequence was probably 720 or similar. Using Create Sequence clip, sequence settings match your clips and no cropping wil happen.

• What is the difference between Diamond White and transparent diamond in the timeline?

  I think there are two types of diamond shape object in the timeline panel.

  White Diamond and transparent domestic diamond.

  Sometimes it goes to white (or transparent from the inside), and I can't understand what are they represent for...

  Anyone have a clue?

  Help me!

  "A solid"keyframe marker"simply saves the current state of" property Panel options ", to the position of the playhead on the Timeline."

  If Automatic transition OFF the State recorded following along the timeline, the keyframe will be hallow - which simply means no transition occurred between the previous saved key image. In appearance, when you read the animation, the movement will be 'snapshot' or sudden from one keyframe to another.

  See the illustration below.

  1 auto Keyframe/Transition to OFF, there is no record of the keyframe.

  2. the time Auto keyframe is selected, but with the automatic Transition OFF, you get a solid keyframe.

  3. with #2 options still in place, the position of head of next reading will track the movement, but will be represented as a keyframe of Hallow's end.

  

  HTH

  Darrell

• Restores not related and deleted Audio in the timeline panel

  I have PRE 8 and have detached and removed audio of some video clips on my calendar. I want to restore the audio rather than put the video on the timeline and re - edit.

  How can I do this?

  See you soon

  I guess just a little, because I have no pre 8, but in your project (corresponding to your imported media) Panel, you should be able to just drag this AV Clip to another video track, which allows Audio go to a tax of Audio track (the original Audio track should now be free). Then, Alt + click on the video part and remove it.

  If you fit when you drag the CTI (current time marker) to the existing head of the video Clip, with Snap ON, very close to the CTI, the Clip will break her.

  Good luck

  Hunt

  PS - I don't think that PrE has the function of game framework, as PrPro, or who would work too.

• Is there a way to copy and paste extracted from the timeline in a project to another project?

  Popular Hello first Pontificaters,

  I use 6 first on a Windows 7 computer.

  
  

  Is it possible to copy and paste a clip to the timeline in a project to another project? ... I can copy my video, but when I open the other project, it allows me not to stick it here... but I was able to copy and paste an element into a single project.  I tried everything... paste it into a new video track and sticking it in to an existing video track in the second project, but the paste option simply isn't there when I opened the second project.

  And if itself does not allow me to do somehow, a type of Clipboard to copy - paste app accessory will allow me to do?... If Yes, who is the soft copy - paste best, trustworthy which is malware free?

  Thank you

  Digi

  It's the same problem as PrElements users. The Clipboard clears when they get out a project, and then open another. That Clipboard extender that I mentioned, Clipmate, works well for them.

  Good luck

  Hunt

• How can I unlock video 1 and Audio 1 on the Timeline (CS5)

  I'm new to using prepro so please bear with me.

  When I want to insert a video clip at the beginning of the video 1 on the Timeline, existing and audio clips are static, so the incoming clip will rest at the beginning (too much riding the other), but I would like to than the other elements to move to the right, including audio in Audio 1.

  Help section of the House, I read how to unlock the timeline in part as follows, '... ". for example, if you want all clips to the right to change video 1 and Audio 1 to move to the right while leaving all the audio clips 2 in place, lock in sync on the video 1 and Audio 1.

  I have to lock the 2 video and/or Audio 2 (that I have nothing there). Just need to to move to the right when I insert another clip.

  Use CTRL while dragging to the timeline. That will insert instead of overlay and it is quite easy to see when you look at the icon.

• Table and film loader affecting the timeline.

  I have a script to load a SWF into a video clip. This script is on the timeline of a movieclip which is then on the main timeline. This script is originally my movie to jump around the main storyline apparently randomly at different times.
  
  The tutorial I found parts of it in there on the main timeline, so I was wondering if the paths might be the cause of the problem.
  
  Thanks any help would be appreciated.

  you charge between 1 and 4 movieclips with your code according to k in each loop. If k is the same in all 4 loops, you will load a single. If k is different in each loop, you will load the 4 (but you will display only the last one).

  s randomly to load one of your swf, use:

• Mix of traditional and interactive reports fails the process of RESETTING of PAGINATION.

  I have a tab page where I got 3 different reports REPORT_A (classic), REPORT_B (interactive) and REPORT_C (CLASSIC) in alphabetical order. I have a page to reset pagination process that will always draw (without condition) when you visit the page with the tab.

  
  Reset pagination process that exists in the front scene of the header is set to fire but not to reset the interactive report. It affects the subsequent classic report REPORT_C as well. The REPORT_A would be reset paging very well since it exists before the interactive report. Is this a bug in apex?

  I created an application of demonstration of test with specific steps to reproduce the problem. The steps are on the demo site itself.

  http://Apex.Oracle.com/pls/Apex/f?p=56638
  SUP: testuser
  P: password

  Apex Version: 4.2.4.00.08

  In my real application I wish a dropdownlist control on the page based on which I would like to filter the data. The dropdownlist control will have a corresponding branch of after-submit who will absolutely perfect pagination to reset & RIR. But when we visit Web site by tab the above problem would break the page.

  I tried the solutions like gReport.search ('SEARCH') but that will only set the interactive report, not the classic REPORT_C. It's just a hack anyway.

  Any ideas. ?

  Hello

  Create before that the process header on page 12 that calls APEX_UTIL. IR_RESET

  Kind regards
  Jari

• What are these gray and blue parts on the Timeline?

  I don't know what they are for, I looked for a few minutes. I looked all around, but there is no way to delete that I met. I'll show you what I mean, that would help a lot! Answer soon some time! I need now a little...

  It is the indicator of cache. Blue = Green = disk cache cache RAM. In any case, it is necessary to understand basic stuff works AE and you need to read up.

  Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC). After the effects of interest area

  Mylenium

• Windows Movie Maker - releasing only audio, is it possible to publish the exact length of the audio and does not include the lot of silent at the end?

  Windows Movie Maker - have 6 minutes of audio spliced, I would like to publish in the form of an audio clip with no video.  I heard that this is possible, and it all works, the 'framework' includes 6 more minutes of space without air circulation that gets compiled with the planned 6 minutes of audio matching 12 minutes of audio rather than the 6 minutes.  Is it possible to MovieMaker 'See' the end of my audio instend, to include 12 minutes in length with it default?  Should I include photos or video for the project to publish only 6 minutes, instead of the 12 minutes?   I hope this makes sense...

  I assume you are using Vista Movie Maker 6 and not Live Movie Maker?

  It is a problem that I've not seen before... the recorded length must be equal
  at times combined clips on the timeline. I guess it's possible
  If you've done a lot of editing/trimming clips... something was corrupted.

  I was wondering... If you import the .wma file saved in Movie Maker and drag
  it to the timeline... it shows the clip as being the length of 12 minutes? If it isn't...
  Perhaps you could he split and right click Delete unwanted 6 minutes and
  then re-save.

  Divide... drag the playback at the end of the music and the type indicator... CTRL + L
  .. .to split the file then right-click of the unwanted part and click on delete.

  Tip: Unlike clips video... audio clips can be dragged to the timeline, so don't forget
  they are dragged all the way to the left to prevent air from dead at the beginning or
  between the clips.

  It may be worth trying to go to... Tools / Options / compatibility... tab and the left click
  the "All default settings" button before the Save.

  And... If the clips audio source are not the. WMA format... it could be a useful
  try to convert them to WMA before you import into Movie Maker.

• If I drag and drop an object in a box. When the timeline returns like that, I want the object to remain in the area and restores not where it was originally.

  Hi all, this is my first post here. Very happy to be here.

  I created an interaction by which objects can be dragged and got stuck in a box. Never, I solved the problem when the playhead returned items I looked where I had left. I did it with as2 and never solved the problem which I am sure is easy enough to solve. I remember someone saying something about levels.

  I need to create an interaction where objects are put in a box and they stay there until the interaction ends. Say that the objects are in a room where the user must visit several times in the interaction. There must be a certain number of objects in the room and drag them into a box to get a done message, I want the user to be able to move to another part of my interaction and come back and be able to complete the conclusion and place the objects in the box without reset everything to where they were first encountered user them.

  I have wi

  All advice, tips are greatly appreciated.

  Looks like you need to add programming that 1) stores the x / y locations of the objects since they change 2) uses this information in position to position objects whenever you enter the picture that they are in.

  You should be able to create variables to store the information that is on a layer that extends from the complete timeline so that the data is stored as it is updated and you move along the timeline.  When you move the object update you its position data. Then, in the context where you have objects use you a simple coding to place objects using this position info... something as simple as...

  Object1.x = object1X;

  Object1.y = object1Y;

  If you are still using AS1/2 you would use _x and FLF instead of x and y

• How to reset the function that allows tracks audio and video to align with the other tracks on the timeline

  Somehow, I have disabled the feature that allows to drag and draw audio and video tracks on the timeline to other titles or positions of import.  Is the only project that was hit, and everything that I can think is that when executing some other keyboard shortcuts, I accidentally performed a shortcut that turned this feature off.

  You want to say, "Snap"? Press "on the keyboard, or press the snap button in the timeline panel.

• Video track snaps to the 1 second increments on the timeline

  I had a video and a separate audio track synchronized in a sequence, then drag a video clip of 'camera 2' (from GoPro to 29.97 FPS) to the timeline. To align the video with audio, I need to adjust the starting point and drag it to the right for accurate lip sync point. However, this video clip only stripes and moves in increments of one second, even if the snap is disabled. How can I do align on the accuracy of 30 images of the clamp per second instead of snapping to the 1-second?

  The timeline value frames (it is about to Audio Units) and try again.

  BTW why your timeline has a red line on it. Don't you have material MPE.