ML370 with Smart Array 532 - equip ML350 with disks - will I lose my config / run?

Similar Questions

• Cannot delete unused or temporary Internet files Program files with "Disk Cleanup".

  1. impossible to delete unused or temporary Internet files Program files with "Disk Cleanup".

  2 cannot run Word Office 97. Tried to delete it and then put it back, twice

  3 cannot run "restore." When I do, he wants to restore my AUDIO files!  I tried restoring the system through the optimization of PC

  4. having reinstalled Windows XP twice, with the same results

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter.

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before the error occurred initially do not use this option.

  If more than one person uses the computer and they have their own user log you need to run Disk Cleanup in each user profile that you want to delete all the unwanted files.

  A better program of disk cleanup is cCleaner. Delete System Restore points may be important if you have little free disk space. The ability to delete them is one of the tools options. You can selectively remove those created in less important moments.

  cCleaner comes with a registry tool. Do not use this tool as any registry cleaner could lead to the creation of very difficult to resolve system errors.

  http://www.CCleaner.com/download

  Office 97. You do not delete the programs. You uninstall using the installation, accessed by selecting Start, Control Panel, add / remove programs.

• DL120 G6 Proliant Smart Array RAID with ESXi (free)

  Hello

  We have ESXi running on a DL120 G6 with 8 GB of RAM, installed via the website of VMWare Go.

  The server has 4 disks configured in the BIOS of the server for RAID 1 (2 and 2 mirrors).

  How can I tell the server to use the RAID configuration as at the moment we seem to use only a single disc of 4.  Currently, I am able to add one of the spare disks 3 as independent data stores.

  Is there a BIOS setting that I need to configure to enable ESXi to use RAID?

  Thank you

  Daren

  The default RAID controller DL120 G6 is a Smart Array B110i, who is not a hardware RAID controller supported (see http://www.vmware.com/go/hcl for the supported RAID controllers) you will be able to use this controller with ESXi RAID functionality.

  André

• ESXi 5.1 HP Smart Array Controller P420i alarm

  Hello

  One of our hosts in VSphere Client VM shows an alarm in the condition of the equipment for the HP Smart Array P420i controller. I noticed that it was noted that this may be a false alarm and that's may be headed down to a problem of firmware version, but every example of which was accompanied by a screenshot of the error with the message firmware in the details. I don't have that or even nothing else in the details. This is the case, however, for control of the ILO for the host that he advises the controller is OK. I get a screenshot of the error below. Does anyone else have this problem?

  Thank you very much

  

  This is a know bug and HP has an advisory page on this subject. for detailed information, you can see link below

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5295168&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03737176-1%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Smart Array controller, required for VMware vSphere Hypervisor

  I currently use VMware Server on Windows 7 for my test enviromnent.  I would like to set up a server using the VMware vSphere Hypervisor.  The server is an HP Proliant ML110 G7.  The server has 4 GB of memory, single core processor quad intel (E3-1240), Intel 82574 Gigabit NIC , and an integrated HP Smart Array B110i SATA RAID Controller.  This Smart Array B110i controller will work with the latest version of the hypervisor?  Version 4.1 documentation controller HP Smart Array under ESXi hardware required but then lists it list a Smart Array P400/256 controller under installation on supported and start of storage systems.

  As far as I can see the server itself, the Integrated NIC (NC112i) or the RAID controller are supported with ESXi (not even on older versions). I really recommend you take a look at the VMware HCL (http://www.vmware.com/resources/compatibility/search.php) or matrix of Support from HP (http://h18004.www1.hp.com/products/servers/vmware/supportmatrix/hpvmware.html)

  Regarding RAID controllers. Make sure that the controller is equipped with at least 512 MB BBWC/FBWC for a good disk performance. Addition of write cache, makes a HUGE difference.

  André

• Re Looking for HP Smart Array P410 profile low media

  Hello

  I recently bought 2 HP Smart Array P410 flea market cards unfortunately profile low media are not come with them which I think is the case when buying nine.

  I had trouble finding that just grateful if someone could point me in the right direction.

  Thank you

  Donald

  Hello

  HP is not in stock profile low support for this particular card.

  This metal low profileoffered on eBay can work.  A measure on your existing maps and see if it fits.  There are other media of your choice, but I would lean towards those with perforated air holes.

  Look over your RAID cards.  Are they manufactured by Adaptec for HP?  If Yes, then maybe Adaptec has the part.

• Smart Array p400 problem

  Hello

  I have a job entirely HP Smart Array P400/512 SAS controller (sata/sas pci-e x 8).

  The controller works well on some PCs, but I have problems with my setup:

  Core i7 920

  ATI HD 4870 1 GB

  Gigabyte ga - x 58 - ud5 (core i7, ich10R chipset)

  the bios can not find the card (the card does not start and it is not listed in the list of irq).

  I tried to update the p400 and tried all the version available, also contacted from bios gigabyte but they told me to contact hp support.

  I also tried to disable all options in the bios, remove all cards and use a PCI (pci 32 bit) but nothing has changed!

  I think that it's an irq with the ich10 conflict because I've tried in a Council ich9 and I have the same problem, I tried on an ati chipset and it works well!

  How can I solve this problem?
  How can I change the irq? (I can't change the irq of the motherboard)

  What use of the p400 IRQs?

  Thank you to all the world tryes to help me!

  FINALLY, THIS MARKET!

  Œuvres (beta bios) F8b well enough with the p400 (and speed up the loading of raid ich10 too), I'm very happy with the new bios.

• HP Smart Array P400 and ESXi 5.1

  Hello

  That's probably a discussion for the hardware section but I don't have the permission to publish in there, so I'm posting here.

  I'll be back in 4 X HP Smart Array P400 complete with 512 MB battery Modules.

  Anyone know or have experience with one of these Smart boards and it'll work in a whitebox build? I think I'll have to update the firmware to 7.08, but she mentions that ESX 4, yet it will work? Or that I would be better off the coast through the RAID controller in a server VM window and run it like this? I don't have a motherboard capable of Intel VT - d again, however. Just curious.

  Thank you very much

  Karl

  According to http://www.vmware.com/go/hcl the P400 controller is supported with ESXi 5.1. What you need to keep in mind, is that there is always a problem with the drivers so that you're currently limited to logical volumes ~ 2 TB (see http://kb.vmware.com/kb/2006942 for more details)

  André

• HP Smart Array P410i - logical drive not visible in 'add a storage '.

  I'm running a server small laboratory with the following configuration:

  DL 360 g7

  Storage controller "Smart Array P410i" with 512 MB BBWC

  6 x SAS 600 GB of disk

  ESXi hypervisor 4.1 - U1 (currently configured directly from the customer)

  Problem:

  1. If I configure the Raid 10 logical unit, everything works fine. A datatore about 1.7 TB can be used.

  2. If I have configure Raid 5 or Raid 0 or Raid 50 then I see the drive in the config and start-up (1 logical drive configured...) tool, but in the storage option Add, there is no disk/lun to select.

  I refreshed everything etc, but only if I use the option usable raid 10 storage "appears.

  Any advice/help welcome.

  Make sure your logical drive is less than 2 TB. VMFS limitation is specifically 2 TB-512bytes.

• No State of health for the Smart Array P400i controller

  Hello

  I installed VMware ESXi 3.5 U3 with HP Management Agents on my HP Proliant DL360 G5 server with a Smart Array P400i controller.

  When I look at the State of health of my material in the VMware Infrastructure Client, I can't control my storage controller.

  The Smart Array P400i controller is compatible (checked with VMWare HCL) with ESXi 3.5 U3.

  So why can I not follow it?

  Thanks in advance,

  Kristof

  The implementation of ESX ICD (health) does not support HP Smart Array controllers. You can't, so not able to monitor volumes P400i RAID controller to health of ESX.

• Problem with disk utility...

  After upgrading to Mac OS Sierra custom poster disk utility looks like more detailed information about what is on my Macintosh HD, only a blue strip for the used area of the disc and the white for the empty area. Any suggestions?

  Try to fix permissions of drive with disk - Apple Support utility

  Ant then reset the management system (SCM) controller on your Mac - Apple Support

• With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

  With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

  (It sleeps)

• HPE Smart Array P440ar: hp smart array p440ar / 2 gb windows 2003 fbwc

  Hello!

  (Hp smart array p440ar / 2 gb fbwc) will work on windows 2003 (32-bit)?

  Hello:

  You can also ask your question on the EBC - Proliant servers HP Support Forum

  https://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.V9fxKeT6u9I

• Is there a way to know if the current modules are compatible with the latest upgrade of Firefox before running the update?

  I want to know if my Add-ons and current themes are compatible with the latest update of Firefox before running the update.

  Hello azdec.

  You can check the add page - we in addons.mozilla.org so it's just one or two. In my view, there is an extensions in the Gallery of modules that allows you to see if your modules are compatible with the newer versions of Firefox. But you'll have to look for them, because I don't know how it's called.

  I remind you that if you want an add-on to be compatible with a newer version of Firefox, you must contact its author.

  In addition, the version of Firefox you are using right now has been suspended and is no longer supported. In addition, it has known bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum stability, performance, security and ease of use. You can get it for free, as always, to getfirefox.com.

• I'm looking to move from Windows/Apple/logic and Cubase Cubase. My questions have to do with the current (2014) Mac mini, specifically the i5 $999 2.8 GHz with 8 GB of RAM. This computer will be powerful enough to run the current logic without any pr

  I'm looking to move from Windows/Apple/Logic Pro X and Cubase Cubase.

  My questions have to do with the current (2014) Mac mini, specifically the i5 $999 2.8 GHz with 8 GB of RAM.

  This computer will be powerful enough to run Logic Pro X DAW and Cubase 8 courses without any problem?

  I would say yes, but I post here too:

  Logic Pro