Smart Array p400 problem
Hello
I have a job entirely HP Smart Array P400/512 SAS controller (sata/sas pci-e x 8).
The controller works well on some PCs, but I have problems with my setup:
Core i7 920
ATI HD 4870 1 GB
Gigabyte ga - x 58 - ud5 (core i7, ich10R chipset)
the bios can not find the card (the card does not start and it is not listed in the list of irq).
I tried to update the p400 and tried all the version available, also contacted from bios gigabyte but they told me to contact hp support.
I also tried to disable all options in the bios, remove all cards and use a PCI (pci 32 bit) but nothing has changed!
I think that it's an irq with the ich10 conflict because I've tried in a Council ich9 and I have the same problem, I tried on an ati chipset and it works well!
How can I solve this problem?
How can I change the irq? (I can't change the irq of the motherboard)
What use of the p400 IRQs?
Thank you to all the world tryes to help me!
FINALLY, THIS MARKET!
Œuvres (beta bios) F8b well enough with the p400 (and speed up the loading of raid ich10 too), I'm very happy with the new bios.
Tags: Notebooks
Similar Questions
-
HP Smart Array P400 and ESXi 5.1
Hello
That's probably a discussion for the hardware section but I don't have the permission to publish in there, so I'm posting here.
I'll be back in 4 X HP Smart Array P400 complete with 512 MB battery Modules.
Anyone know or have experience with one of these Smart boards and it'll work in a whitebox build? I think I'll have to update the firmware to 7.08, but she mentions that ESX 4, yet it will work? Or that I would be better off the coast through the RAID controller in a server VM window and run it like this? I don't have a motherboard capable of Intel VT - d again, however. Just curious.
Thank you very much
Karl
According to http://www.vmware.com/go/hcl the P400 controller is supported with ESXi 5.1. What you need to keep in mind, is that there is always a problem with the drivers so that you're currently limited to logical volumes ~ 2 TB (see http://kb.vmware.com/kb/2006942 for more details)
André
-
Ive had the issue of "the upgrade/replcement" a table, preff without fair fallout RAID options.
IM planning to replace these 800 on error SMART view with 1 TB of SeaGate.
but I can do this without having to struggle a lot on the errors without messages ect ect.
AND ive also the weird error in the '3rd' as the 5th disk raid array is dying, that's why im asking this.
the player gives this error not frequently and only occasionally during the system startup, who now works for 4 years.
the server and the P400 have the latest firmware installed.
I run the following configuration:
HP DL185G5, so 12drive
- 2 x WD Raptor, 300 gb RAID1
- 1 x WD Green, 800 GB JBOD
- 3 x WD Green, 800 GB RAID5
- 3 x WD Green, 800 GB RAID5
- 3 x WD Green, 800 GB RAIID5
If you need more information, please let me know, and I provided
Hello denniswier,
Your question on your server it will be better answered by our sales department.
Here is a link to business forums.
Nice day.
-
Smart Array P400 (upgrade of cache)
IM the raid card running with standard 256 MB cache module, but im having 2 512 Mo hiding laying around and you want to update the map with one.
and all hell breaks in bulk... the map gives the error "cannot start/start card.
When I put the 256 'original' back, he starts if nothing happened.
Ive even tried to start with a spare P400 in the 2 512, and we will also start very well.
am at a loss here,
the server now works for 4 years.
the server and the P400 have the latest firmware installed.
I run the following configuration:
HP DL185G5, so 12drive
- 2 x WD Raptor, 300 gb RAID1
- 1 x WD Green, 800 GB JBOD
- 3 x WD Green, 800 GB RAID5
- 3 x WD Green, 800 GB RAID5
- 3 x WD Green, 800 GB RAIID5
If you need more information, please let me know, and I provided
Hello denniswier,
Your question on your server it will be better answered by our sales department.
Here is a link to business forums.
Nice day.
-
Smart Array controller, required for VMware vSphere Hypervisor
I currently use VMware Server on Windows 7 for my test enviromnent. I would like to set up a server using the VMware vSphere Hypervisor. The server is an HP Proliant ML110 G7. The server has 4 GB of memory, single core processor quad intel (E3-1240), Intel 82574 Gigabit NIC , and an integrated HP Smart Array B110i SATA RAID Controller. This Smart Array B110i controller will work with the latest version of the hypervisor? Version 4.1 documentation controller HP Smart Array under ESXi hardware required but then lists it list a Smart Array P400/256 controller under installation on supported and start of storage systems.
As far as I can see the server itself, the Integrated NIC (NC112i) or the RAID controller are supported with ESXi (not even on older versions). I really recommend you take a look at the VMware HCL (http://www.vmware.com/resources/compatibility/search.php) or matrix of Support from HP (http://h18004.www1.hp.com/products/servers/vmware/supportmatrix/hpvmware.html)
Regarding RAID controllers. Make sure that the controller is equipped with at least 512 MB BBWC/FBWC for a good disk performance. Addition of write cache, makes a HUGE difference.
André
-
ESXi 5.1 HP Smart Array Controller P420i alarm
Hello
One of our hosts in VSphere Client VM shows an alarm in the condition of the equipment for the HP Smart Array P420i controller. I noticed that it was noted that this may be a false alarm and that's may be headed down to a problem of firmware version, but every example of which was accompanied by a screenshot of the error with the message firmware in the details. I don't have that or even nothing else in the details. This is the case, however, for control of the ILO for the host that he advises the controller is OK. I get a screenshot of the error below. Does anyone else have this problem?
Thank you very much
This is a know bug and HP has an advisory page on this subject. for detailed information, you can see link below
-
HP Smart Array P410i - logical drive not visible in 'add a storage '.
I'm running a server small laboratory with the following configuration:
DL 360 g7
Storage controller "Smart Array P410i" with 512 MB BBWC
6 x SAS 600 GB of disk
ESXi hypervisor 4.1 - U1 (currently configured directly from the customer)
Problem:
1. If I configure the Raid 10 logical unit, everything works fine. A datatore about 1.7 TB can be used.
2. If I have configure Raid 5 or Raid 0 or Raid 50 then I see the drive in the config and start-up (1 logical drive configured...) tool, but in the storage option Add, there is no disk/lun to select.
I refreshed everything etc, but only if I use the option usable raid 10 storage "appears.
Any advice/help welcome.
Make sure your logical drive is less than 2 TB. VMFS limitation is specifically 2 TB-512bytes.
-
HPE Smart Array P440ar: hp smart array p440ar / 2 gb windows 2003 fbwc
Hello!
(Hp smart array p440ar / 2 gb fbwc) will work on windows 2003 (32-bit)?
Hello:
You can also ask your question on the EBC - Proliant servers HP Support Forum
https://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.V9fxKeT6u9I
-
Re Looking for HP Smart Array P410 profile low media
Hello
I recently bought 2 HP Smart Array P410 flea market cards unfortunately profile low media are not come with them which I think is the case when buying nine.
I had trouble finding that just grateful if someone could point me in the right direction.
Thank you
Donald
Hello
HP is not in stock profile low support for this particular card.
This metal low profileoffered on eBay can work. A measure on your existing maps and see if it fits. There are other media of your choice, but I would lean towards those with perforated air holes.
Look over your RAID cards. Are they manufactured by Adaptec for HP? If Yes, then maybe Adaptec has the part.
-
HP Smart Array 642: driver HP Smart Array 642 for Windows 2008 R2
Nice day
I am trying to install drivers for HP Smart Array 642 controller. I have installed Win2008r2. I tried the drivers for Win2008x64-> I get BSoD every time when I try to apply the driver.
Non-miniport driver for Win2008r2 does not work.
Firmware is 1.14. But there's no FW for Win2008r2. The FW for Win2008x64 does not say that OS is not correct.
Where are a real driver for Win2008r2?
Hello:
You can also ask your question on the Forum of Support Community Business Enterprise HP - section Server Proliant where it seems that most of the posts are listed about the Smart Array devices.
http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VfQu5GaFO9I
-
HP Smart Array P822/P840 does support VAAI?
HP Smart Array P822/P840 does support VAAI?
Controller RAID P822 is considered to be an I/O device and therefore would not be candidate to support VAAI.
For more information, feel free to review the VMware Compatibility Guide: search system
-
ML370 with Smart Array 532 - equip ML350 with disks - will I lose my config / run?
We have an ML370 with a
and the motherboard has failed.
I want to put the disks and the controller of table in a ML350, but want to know if it will lose its configuration or is it boot/run with these mobile?
Please help - urgent
Mark
It will depend on where the tables in table are kept with the card. Be sure and back up all your data.
This map requires an older system motherboard for it to work.
-
DL120 G6 Proliant Smart Array RAID with ESXi (free)
Hello
We have ESXi running on a DL120 G6 with 8 GB of RAM, installed via the website of VMWare Go.
The server has 4 disks configured in the BIOS of the server for RAID 1 (2 and 2 mirrors).
How can I tell the server to use the RAID configuration as at the moment we seem to use only a single disc of 4. Currently, I am able to add one of the spare disks 3 as independent data stores.
Is there a BIOS setting that I need to configure to enable ESXi to use RAID?
Thank you
Daren
The default RAID controller DL120 G6 is a Smart Array B110i, who is not a hardware RAID controller supported (see http://www.vmware.com/go/hcl for the supported RAID controllers) you will be able to use this controller with ESXi RAID functionality.
André
-
No State of health for the Smart Array P400i controller
Hello
I installed VMware ESXi 3.5 U3 with HP Management Agents on my HP Proliant DL360 G5 server with a Smart Array P400i controller.
When I look at the State of health of my material in the VMware Infrastructure Client, I can't control my storage controller.
The Smart Array P400i controller is compatible (checked with VMWare HCL) with ESXi 3.5 U3.
So why can I not follow it?
Thanks in advance,
Kristof
The implementation of ESX ICD (health) does not support HP Smart Array controllers. You can't, so not able to monitor volumes P400i RAID controller to health of ESX.
-
How | I stop the box Smart Web Printing from popping up. Whenever I try to open anything the SWP box open axking me to insert the disc that I did not. I don't have this SWP came BU today has started and I can't get rid of him. | I deleted the SWP of Add/Remove Programs, but it continues. Can someone help me remove this problem.
Thank you
Finally I thought of her. Found the place of management module browser and off the sea Smart Printing part and all this now is not working properly. Thanks for the help.
RPMC
Maybe you are looking for
-
How to speed up my pad mini 1st generation on iOS 9.3.1?
MY iPad has been very slow right now how can I speed up?
-
Im trying to download something from the internet, and when he gets to the part of the plant it just tells me that "the administrator has set policies that prevent installation" im the admin then how we change these so-called policies?Message edited
-
my windows mail screen has changed, I don't have a toolbar at the top to manage groups of contacts/contact etc., it now looks like my pictures toolbar - options being organize / view / slideshow/burn - how to get the tool bar back original?I think th
-
Ask now for over 3 years, a way to fix this problem
Hello For the last im from 3.5 years having problems with blackberry webworks (bbwp) signatory. It is in these 3.5 years maybe 4 or 5 different computers, different operating systems, everything. The problem is that the signer crashes, he starts to s
-
Problem installing Error 1719 tried all fixes please read.
Hello I have tried all four methods to resolve this issue, however, in the record of service, I don't have the installer and in the registry, I did not msiserver so I can't change WOW64. So, how can I fix the problem? I spent days trying to solve thi