MMO to laptop computer crash caused Windows updates

Similar Questions

• I have an old computer that needs windows updates, how can I do this?

  I have an old computer that needs windows updates to insall microsoft office or even the internet. Anyone know how I could do. The computer has a version of windows xp. Thank you

  Original title: Hi,.

  What level of MS XP Home/Pro/do you have?

  Things to consider:

  What Version of Windows I have?

  Click Start, select run, type: WINVER
  Press enter
  or
  Press Windows + Pause break key

  Note the version of Windows, including the SP level.

  How to determine whether a computer is running a 32-bit version or the 64 bit version of the Windows operating system
  http://support.Microsoft.com/kb/827218

  32-bit and 64-bit Windows: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  If you need SP 2 and SP3

  http://support.Microsoft.com/kb/322389

  You will need to have at least SP1, SP1a or SP2 before installing SP3.

  Installation of SP2: http://support.microsoft.com/xpsp2getinstall

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  List of fixes included in Windows XP Service Pack 3
  http://support.Microsoft.com/kb/946480

• computer crashed, have windows vista, indented leave, all the documents lost, can I get all the files, how do

  computer crashed, have windows vista, indented leave, all the documents lost, can I get all the files, how to do it, in simple terms,

  Thank you.

  If by "computer of new beginning" you mean that you have started your recovery or disk restore factory set and reinstalled Windows, then the ability to recover your files is practically zero.  You can try a utility like Recuva (http://www.piriform.com/recuva) but since you have rewritten the entire hard drive, it is highly unlikely that anything will be recoverable.

• Caused Windows updates computer crash

  Anyone else have problems with latest updates (from June 30 to July 10)?  Since June 30, my computer has stopped unexpectedly 5 times.  I ran virus scan, ad-aware, etc.  The only thing that worked was a system restore before June 30.  Unfortunately, Windows automatically updated again and I had the same problems.  I had to remove the updates manually.  Any ideas why this happened?

  Hello

  ·             You receive an error message when the computer crashes?

  ·             What anti-virus program do you use?

  Method 1:

  I suggest you try to install the update one by one and check the update is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Update

  Method 2:

  It is possible that the software security or any third-party program installed on the computer is in conflict with the update of Windows.

  I suggest that you put the computer in a clean boot state, and you try to install updates.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  I also suggest you update to the latest graphics card and drivers of the motherboard Chipset for checking Web site of the manufacturer of the link provided below:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

• How to fix my computer crashing whenever windows is an automatic update?

  Whenever my computer did an automatic update of windows and automatically restarts my computer crashes and I have to open in safe mood so he can go back on.

  How can I fix it?

  Assuming that McAfee Security Center is NOT yet installed:

  McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. do a clean install of McAfee Security Center.

  -Online if you purchased your software directly from McAfee, go to https://home.mcafee.com/Secure/Protected/Login.aspx to connect and download your software.

  -Online DELL users should go to https://us.mcafee.com/root/login.asp?affid=105

  5 IMPORTANT! Manually & repeatedly updated McAfee Security Center until you get a "not more than updated" or similar prompt.

  6. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  7. now, open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & race that secure it in modes AGGRESSIVE then by DEFAULT. [1]

  8 restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Laptop Presario CG56: CG56 crashed after Windows Update

  After Windows update, set during the race, woke to find a "scree Orange" with the logo of Compaq.  Press F11 to enter in recovery mode has organized the restoration of the system for each restore point.  Finished with 0x8000ffff.  A ran the recovery system completely at the end.  Finished with the Orange screen.  Minimized ran impage recovery all the way to the end.  Repeat screen Orange.

  I find that the BIOS is corrupted in Windows Update, somehow.  I can get to the line of command in recovery mode, but I don't know what to do.

  Help!

  Me am HP Advanced System Diagnostics V3.0.3.0 by pressing f2 until the screen has finally come.  Do you have the System Diagnostics.

  Have you hard reboot by removing the battery, press the button for 15 seconds, extra power, hit start and the start up like a new PC was started and Windows.

• Toshiba laptop problem after Gaming/Windows Update.__No solution on the web.

  Hello! I use a Toshiba laptop.

  I was playing a game and windows update popped up!

  He has not yet finished, and my computer turns off. It was late in the night, so I decided to start the computer the next day.

  He will appear with the options
  'Safe Mode '.
  "Safe mode with network.
  "Safe mode with command prompt.
  "Last good known Configuration".
  "Start Windows normally".

  Whichever one I choose Windows XP logo appears, then crashes immediately, restart.

  So I tried to use "do not restart in case of shutdown"

  And the blue screen appears

  "stop: 0x0000007e (0x905c49b8, 0xf792b2b4, 0 x 80000003, 0xf792afb0).

  What is this error? I can't enter safe mode by the way!

  Thanks for your help.

  It's http://support.microsoft.com/kb/330182

  Advanced Troubleshooting use the following methods in the order in which they are presented. Method 1: Make sure that you have enough hard drive firstly space, make sure you have enough hard disk space. The Stop error message can be caused by insufficient disk space.

  If you use safe mode or the Recovery Console to start the computer, delete any unnecessary temporary files, Internet cache files, backup files of stored-program files that contain fragments of disk analysis files (.chk files). Alternatively, you can install Windows XP on another hard drive that has more free space.

  If you cannot start the computer, go to the next method to update the BIOS of the computer.

  For more information on safe mode or the Recovery Console click on the numbers below to view the articles in the Microsoft Knowledge Base:

  315222 (http://support.microsoft.com/kb/315222/) a description of the options to start Windows XP in Safe Mode
  314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console

  Method 2: Update the computer BIOS if freeing space on your hard drive has not solved the problem, the BIOS might have to be updated. Use hardware and software vendor contact information items that are listed in the "Références" section to contact the computer manufacturer to obtain the most recent update of the BIOS.

  Note When you update the BIOS, you may have to disable the memory the BIOS options, such as caching or shadowing him, temporarily. Method 3: Disable or update device drivers if you have successfully updated the BIOS and the problem persists, on the computer video card drivers may have to be updated or disabled. Follow these steps to troubleshoot video card drivers:

  1. If a driver is listed by name in the Stop error message, disable or remove that driver.
     • If the error occurs during the startup sequence and the system partition is using the NTFS file system, you may be able to use safe mode to rename or to delete the faulty driver.
     • If the driver is used as part of the procedure of starting the system in safe mode, you must use the Recovery Console to start the computer.
  2. If the Stop error message does not indicate a specific driver, update the video card for the latest drivers.
  3. Disable or remove drivers or services that you recently added.
  4. Check the list of Microsoft hardware compatibility (HCL) to determine if the computer's PCI devices are compatible with Windows XP. For more information about the HCL, see the Microsoft Web site at the following address:
     http://www.Microsoft.com/whdc/hcl/default.mspx (http://www.microsoft.com/whdc/hcl/default.mspx)

  Method 4: Remove unsigned drivers if you have updated the video card drivers and the problem persists, or if you cannot start Windows in safe mode, the problem may be caused by a different driver, not signed. Remove all drivers that are not digitally signed by Microsoft. For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:

  316434 (http://support.microsoft.com/kb/316434/) how to perform advanced clean boot troubleshooting in Windows XP

  Method 5: Remove all third-party drivers, you may be unable to determine which third-party driver causes the error. If removing unsigned drivers does not resolve the problem, try to move all third-party driver to the %Windir%\System32\Drivers folder files to another location. Follow these steps to move the third-party driver files:

  1. Use the Recovery Console to start the computer, or start the computer from a different installation of Windows if you have performed a parallel Windows installation.
  2. Create a temporary folder for the driver files. For example, you can create a c:\DriverTemp .
  3. Move all files that do not have a creation date for Windows XP of the 13/08/2001 to the %Windir%\System32\Drivers folder to the temporary folder you created in step 2.

     Warning If the computer relies on pilots third-party IDE or SCSI controller for correct operation, you must identify those driver files and leave them in the %Windir%\System32\Drivers folder.

  4. Restart the computer.
  5. Continue Windows Setup. You can add the files of the driver to the computer, one at a time to identify the faulty driver.

  Method 6: Remove third-party remote control services if you still have the problem after you use the previous methods and the Stop error message contains the name of the file Win32k.sys instead of a file name of the driver, the problem may be caused by a control program to third distance. To remove the service, use the Recovery Console to start the computer, and then delete the file of control service third-party remote.

  -----------------------------------------------------------------
  You can also try running Windows XP disk you and try the repair utility. Please rate me upward if you find my post helpful. Thank you!

• Computer beep after Windows Update

  I recently used the windows update as usual and the next time I tried to turn on my desktop computer would not work.  When I turn it on there is no light on the keyboard and no signal on the screen.  A long beep sounds in seconds and repeats itself again and again.  The computer won't do anything else.  Can anyone help?

  Fingsey,
  What you hear is called everything a simply "beep code", and this indicates a problem with your hardware.  Basically, your PC is not able to start even to the point of making the BIOS.  This happens usually when there is a problem with your RAM, but can also be caused by an error of CPU or a problem on the motherboard.  You will need to contact the computer manufacturer to find out what the beep code and how to correctly resolve the hardware error. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer slow after Windows update

  Launch Windows XP Pro on a desktop computer. After an automatic Windows, updated March 24, 2011 during the boot process has increased substantially and the computer seems slower in connection to and download from the internet. Anyone know the cause and can I cancel the most recent update?

  Assuming that IE7 or IE8...

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. the behaviour continues if you start IE in no Add-ons mode?

  -Online start | (All) Programs | Accessories | System Tools | Internet Explorer (No Add-ons).

  2. the behavior persists it if you open IE (only) to http://support.microsoft.com/kb/923737, run hard, and then restart?

  3. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  4A give application Norton or a McAfee application ever been installed on this computer?

  5. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

• After re-formatting computer, cannot run Windows Update on Vista

  Well, I recently re-formatted my computer. I bought my computer through Aaron, and they never gave me a recovery disk, until a few weeks ago. My computer was originally came with Windows XP and now I have Vista. Now, I can't start my windows update. It does not give me an error code it keeps just to the search and the search with nothing else coming. I was also playing Second Life before I changed to Vista, and now I can not play because it says that my drivers may need to be updated or reinstall. Other tests show my everything works fine, but I can't find the updates for one of my drivers. I can't get the right code for Vista because I don't have the code for it. I have a very hard time with this. I need some kind of help. Please, I beg you!

  * original title - I can't run my Windows Update/Driver problems *.

  If you do not have the product key for Vista, we can not help you on the PK if you ever had a product given to you key.

  If you had one and he lost, read this:

  http://www.Belarc.com/free_download.html

  http://www.magicaljellybean.com/KeyFinder/

  If your Vista operating system is still active and running, use one of the programs above to find your product key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For driver problems:

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For Windows Update problems:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  We do not know how Vista has been installed on your machine.

  Reinstall the access path is normal: Reinstall XP (because that's what was originally on it) > then go to Vista.

  I suggest that return you to where you had installed Vista and ask them to install/repair properly.

  Cheers.

  Mick Murphy - Microsoft partner

• The problems causing Windows Update

  I woke up this morning and my computer did an update all night and it turned off and restarted.  It was missing some things and I do not have access to some videos and such that I saved it.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  This is the Vista operating system repair and recovery Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  You will receive the best help here.

  See you soon.

  Mick Murphy - Microsoft partner

• My laptop won't allow windows updates. message is not activated.

  I can't update my windows or micrsoft software on my laptop.

  Activate Windows 7 manually:

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. Select the telephone activation option and brace yourself for a real person.

  This is the Forum for Windows Update.

  You will get the best help for any problem of activation in Windows 7 install, upgrade and activate Forum. the link below:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads >

  08/14 / 1115:04: 45 pm UTC

• Just did my laptop, tried to do windows updates and get a message T "here has been a problem the site witt" and can not open the page I requested at this time.

  Just, I redid my laptop using my system recovery disks. I went to windows update and get this msg when I click on Express.com: the site has encountered a problem and cannot display the page you are trying to view.

  Original title: I redid all my laptop. I went to windows update and get a message that says: there was a problem witht the site and I wanted that the pag can not open the page I have requessted at this time.

  You must download and install Windows XP Service Pack 2 (if not already installed) followed in Windows XP Service Pack 3.  You will find two of them at http://www.microsoft.com/downloads - download the "Network Installation Package" for the two and ignore the part about them being only for the professionals - the parcel I recommend you download will install with or without network connection.

• HP G62 laptop computer cannot start windows.

  Run the test at the start and test drive, both give the same error.

  type: startup

  result: failure

  Failure ID: PG81W4-5L36A1-MFKR4J-6OU5O3 (not sure if they are equal to zero or a letter O in tientirely)

  Description: hard drive 1

  type: hard drive

  result: failure

  Failure ID: PG81W4-5L36A1-MFKR4J-6OU5O3 (not sure if they are equal to zero or a letter O in tientirely)

  Description: hard drive 1

  so, I guess, it's the hard drive, no?
  How should I proceed?

  Additional info:

  Model: HP G62 laptop computer

  Prod.ID: LF772EA #ABZ

  running windows 7

  Hello

  The error code will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Laptop computer formatting with windows Genuine USB flash drive!

  Hello

  I recently bought a 2nd hand with preinstalled applications and operating system portable.  Windows was not authentic and now I find myself with endless work on the laptop problems.  Anyone can guide me please how:

  -format my laptop

  -re - install windows 7

  -re - install MS office (e.g. Word, Excel, Outlook) applications AND

  -anti-virus software

  I DON'T HAVE THE LICENSE KEYS FOR ANY SOFTWARE, SO PLEASE ME ADVISE WHERE TO FIND FREE OPERATING AND APPLICATION SOFTWARE.

  I know it is a huge demand, but any help step by step will be appreciated.

  Kind regards

  Hello

  Windows is not FREE; you have to buy.

  To buy Windows 7 from Amazon.com if the methods listed below will not apply to you.

  You need a legal Office product key to install Office.

  No product key for Office, you cannot install Microsoft Office Microsoft Office is not free.

  Try OpenOffice which is free:

  To use the FREE Microsoft Security Essentials AV.

  _____________________________________

  As it's a laptop, it should have been an operating system pre-installed on it when new

  Here are the different methods to reinstall that preinstalled operating system:

  You can contact the manufacturer of your laptop and ask them to send you a set of recovery disks.

  Manufacturers that make normally for a fee.

  This may not work as a pirated copy was installed:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  These two methods of resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  ____________________________________

  This applies only if Windows 7 is the original operating system pre-installed when the laptop is new (COA sticker check)

  Download the correct ISO file and make your own drive and use the product key located on the COA sticker.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/

  And Neosmart has instructions on how to burn ISO disk images using imgburn:

  http://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

  Then do a clean install:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  The COA sticker is either or in the battery compartment on the underside of the laptop.

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  By using the downloaded ISO file method can require the Activation of phone.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

   

  ________________________________________________

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  See you soon.