The problems causing Windows Update

Similar Questions

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• How to solve the problem with Windows Update on Windows 7 64 bit Home Premium SP1; Module Windows install encounter error 126, impossible to run/scannow sfs or TrustedInstaller. Help, please

  Hello

  First of all, thank you in advance for any advice for any help, you can offer.

  A week ago I noticed that Windows Update had a backlog of updates (30-40) as I had it value updates but let me choose whether to install them. As I tried to install, I noticed download election for hours but no visible progress in the taskbar and only a few updates installed on restart. Try to check the updates of similar results. I tried a number of solutions suggested here as a tool for troubleshooting Windows Update, but it made that seem to clear my list of updates to uninstall and make sure Windows Update has been under the impression that I had never checked the updates, apparently a worsening of the problem like today no update appeared and I encountered error 8007000D.

  I've tried other options like Windows system update readiness tool and tried to run the sfc/scannow System File Checker, but what who would not (cannot start service repair) I grew more and more worried. On recommendation from other forums, I tried also to start TrustedInstaller in command prompt, which does not. Unfortunately, I had run a Disk Defrag and clean-up recently which had been deleted and (unbeknownst to me) my last restore point. The root of the problem seems to be the Windows Modules Installer, which does not start when you are prompted in Services (error 126), something wrong with the registry may. So reluctantly, I tried to perform a repair installation using a downloaded iso, I burned onto a DVD (insured was also Windows 7 Home Premium 64 - bit SP1). However, even if it doesn't seem to work, it is constantly check for installation updates (unless this is supposed to last several hours?) or if I opt not not to check, it pass the compatibility check and then fail in the second stage (collection of files, settings, and programs). I tried several times, once in offline mode with my disabled (Norton) antivirus and once in clean boot mode.

  I don't know what other options I have. I would like to avoid a clean as much as possible installation, because my computer (HP laptop) still seems to operate normally (for the moment) outside the impossibility to install Windows updates (via Windows Update or directly from Microsoft, it seems), but I think it would just leave vulnerable more and more over time. Has anyone else had similar problems and has found a way to solve? I'm not a computer expert so any help would be greatly appreciated.

  Hello

  Try the troubleshooting steps in this link: error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found".

  Let us know how it goes.

• The problem with windows update Language Packs

  JA kada hocu da instaliram neki jezicki paket I kada mi sta pokaze da izaberem sta cu instalirati nema paketi jezicki Windows 7

  Hi Aleksandar,

  Thank you for the update.

  Ideally, when you install a language pack or choose a language other than your system language, most of the functionality is displayed in the language updated the. However, there are some system settings that might still appear in the base language. In this case, we would need install the new operating system choose the language desired. From now on, I suggest you to verify that you have followed the steps exactly as detailed below to select the English language (make sure that the keyboard settings and input methods can also be programmed for the English language pack).

  a. Click Start, control panel to type in the search bar, then click on this Panel.

  b. open the language.

  c. click Add a language and then select the language you want (example: English) and click Open.

  d. now, select a language (example: English (United States).)

  Note: Once you are done with the desired language setting, restart the computer and check.

  Additional information:

  Language packs

  Hope this information is useful.

• Problems with the installation of windows updates and reboot the computer

  When you try to restart the computer it freezes on "installation updates.do not turn off computer.". Currently have 20 updates which will not be installed. computer says CCC.exe prevents the computer from restarting and getting error code 80240016 when you try to install the updates

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, are kindly Error Codes and exactly what happens when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100) __Message: installation error prevented the service pack 2 windows systems (KB948465) _

  Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100)
  Message: Installation error prevented the service pack 2 windows systems (KB948465)

  http://support.Microsoft.com/kb/956702

  «Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: «0x800B0100»»

  Method for Windows Vista or Windows Server 2008 to resolve this issue, run the tool (Checksur.exe) system update. To do this, follow these steps:

  1. Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  http://support.Microsoft.com/kb/947821/

  "Description of the preparation tool system update for Windows Vista for Windows Server 2008 and for Windows 7"

  If the above solves the problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• How I download 80070103 windows update is update safe what is the problem with this update

  Just got the update installation today to download update 80070103 time ever I go to download the update fail what is the problem with this update & how do I get updated.

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with Windows Update.

  Please answer these questions:

  1. What is the update's KB number?

  2 have you made any changes to the computer before the show?

  Let us try the following methods:

   

  Method 1: Run the following fix - it:

   

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2: See the following article:

  Windows Update 80070103 error code:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  Hope the helps of information. We know if you need help. We will be happy to help you.

• When I run Fix it is indicates a problem with Windows Update, says that it suits him but will show the same failure over and over

  Running Windows Vista SP2 and IE 9.  When I run Mr. Fix - It on Windows Update, is shows the components of Windows Update must be corrected.  I am hosting the program solve the problem.  If I re - run the same test again once, he does the same.  I have the other problem of breakdown on race fix it on any other criteria.  When I run the fix - it on Internet Performance and security, it shows my data execution Protection is disabled and my Smart Screen Filter is off.  Both are activated.  If I let the program Fix - It problems, even if they are correct, Fix - it continues to fail.  Any ideas?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.Microsoft.com/forums/en/fixitcenter/threads

  It will be useful.

• Impossible to solve the problem of Windows Vista Service Pack 2 update! (error code 80073712)

  original title: could not resolve the problem of Windows Vista Service Pack 2 update!

  Hey there,

  I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!

  Thank you very much

  UD

  Hi Electrocuteud,

  You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Problem with Windows update during the installation of the printer

  I tried several times to install an older printer to the Epson (Stylus Photo 925) on a computer running Windows XP Professional.  When I get to the part of the installation where I select the printer from a list in Windows this printer is not available, so I chose to Windows Update the list.  I've done several times, and the list of Epson printers is actually reduced after selecting the 'Windows Update' button.  Its unusual because a few weeks ago, I did the same configuration for a new machine of Windows 7 and Windows Update added this printer to the list.

  I should add that my printer is on a print server if the installation is a bit more detailed than just plugged in the USB cable and installation.

  If anyone can help with this question?

  Updates required driver from the download page of the device manufacturer or the computer, not Windows Update. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• receive a problem caused windows to stop working, will notify you if a solution is found. Display driver igfx has stopped.

  the computer, ups and stops working...

  on a number of occasions, I get a blue screen with a print so small, that I can't read. Receive message a problem caused windows to stop working, will advise if a solution is found. Display messages to receive driver igfx has stopped working.

  You should look at the web site of the manufacturer of your video card or monitor to see if they have updated drivers.

• Problems after Windows Update on Vista wireless

  It seems that other people have a similar problem, but I'll post this new...
  I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

  I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

  Hi dabaum77,

  From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

   

  Access the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Follow these steps to disable the automatic updates:

   

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  
  Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

  
  You can also check the update problem in Windows Update history.

   

  Follow the steps to check which day caused the issue:
   
  1. open the control panel (all items view), and click the Windows Update icon.
     
  2. click on the link to view update history.
    
  3. to view the details of a single Windows Update-
  (A) select and right-click on a Windows Update list, and then click details.
  
  (B) click on close when finished.
   
   
  You can also uninstall the update that is causing the problem to occur, although it is not recommended.
   
  1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
   

  

  2. in the programs and features, click the link updates installed.
   

  

   
  3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
   

  

   
  4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
   

  

   
  5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
   

  

  
  6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
   
  
  Aziz Nadeem - Microsoft Support