531 s Dell power supply-no molex

Hello everyone, I recently bought a HARD drive cooling fan for my 531 s and when I went to install it, I realized that factory supply has no power molex connectors. the connector on the cooler is a passage from molex with male and female ends. The power supply has an unused floppy connector. Is there an adapter that will allow me to use this connector to power my cooler? Thank you.

You need a SATA (adapter PSU) > Molex (fan) to convert a 4-pin Molex in a SATA power connector

Tags: Dell Desktop

Similar Questions

  • Owners Dell POWER supply problems. Pls help.

    Hello. I have a Dell power supply, model D235PD-00 number. I was told that it is a power supply owner and must be converted to improve. Where can I get a Dell converter to convert? These are the connectors.

    Power supply connector 1 x 24 - Pin ATX motherboard Standard

    1 x 4-pin ATX power supply

    2 x SATA power connectors

    1 x floppy drive power connector

    aPCnoob

    Hello. I have a Dell power supply, model D235PD-00 number. I was told that it is a power supply owner and must be converted to improve. Where can I get a Dell converter to convert? These are the connectors.

    Power supply connector 1 x 24 - Pin ATX motherboard Standard

    1 x 4-pin ATX power supply

    2 x SATA power connectors

    1 x floppy drive power connector

    aPCnoob

    Dell D235PD-00 PSU is a unit owner, due to its body shape and size, not the wiring, it's why there are no converters available.

    http://www.Amazon.com/genuine-Dell-replacement-OptiPlex-replaces/DP/B00U2VBZRE

    Bev.

  • A Dell power supply

    Hello world

    So I just ordered a W540 as my PC work too Exchange on my old Dell latitude.

    My company is trasferring from Dell to lenovo setups in all offices.

    We move arround with our mobile phones, so we have a lot of power additional Dell supplys (19.5 V 3-34A with round plugs).

    My question is, that we will be able to use an adapter like this one (http://www.ebay.com/itm/2PCS-New-Power-converter-Cable-Adapter-For-Lenovo-ThinkPad-Carbon-0B47046-/3...) to power our laptops instead of buying loads of new power supply?

    Best regards

    Kim

    Lol the dell that won't work. First of all, you have to either 6.75 amps or 7.5 amps, depending on whether you have quad core or dual core CPU and 20V. The Lenovo who have a signal pin and the device determines what power supply capacity you have by measuring the resistance between pin signal and the mass. The dell have a lack of capacity and not report correctly.

  • Dell power SUPPLY in my XPS 420 block?

    I put the PSU located on the Dell site int omy XPS 420 cases? They adjust?

    http://Accessories.us.Dell.com/SNA/category.aspx?c=us&l=en&s=DHS&CS=19&category_id=6732& ~ CK = bt

    It's the PSU, I found, I'm looking for a 500W power supply, so I can run a new videocard safely.  Right now I have the 375W PSU. If someone of you have replaced and PSU of the XPS 420, can you give me the name or a link to the power supply?

    Thank you.


  • (Redirected) Place 11 pro Dell power supply issue

    Hi supports,

    I recently have a problem, when the machine come sleep automatically or press the power button a times, the machine doesn't have to wake up. Pressing once, machine vibrating, pressing home page, it vibrates too, but does not not in the following seconds.

    Pressing the power button for the other 3 seconds it vibrates, I think that it is a power on action, but it takes about 20 seconds to the account indicated by the dell logo, compared with 2-3 seconds before. It will then start normally, just Can not sleep.

    When I go into Device Manager, it shows an exclamation point on the management engine intel, showing a status_device_power_failure error. See my screen below Cap

    I have updated my machine, can not help

    I ran the diagnostic test at the start, no problem

    I format and reinstall a new 8.1 victory, still a problem

    installed the latest firmware, bios, drivers shown on the dell support page, no luck.

    management engine intel installed provided by intel, does not work neither.

    Seems this product only is not supported in my region (HK) yet, I can't find any local support to help me.

    Help, please. Thank you ~ ~ ~

    Hi heeae,

    Please repost this in the mobile forum for faster assistance.

    http://en.community.Dell.com/support-forums/mobile-devices/

  • Area51 R2 modular power supply

    Howdy!

    I need to add a Firewire/1394 card has in my new Alienware Area51 R2 machine.  I was really surprised that he does not understand this (or E-SATA) - should have looked more carefully.  I will also add a 7 port USB-3 cards from my old machine I received several complaints about not enough system resources to support all my USB devices.

    However, it does not resemble any connections of power supply type Molex 4-pin cables are available in the machine.  I have power 850W and it is modular (something I wasn't expecting) and it has two free 6-pin ports.  Alienware is not seen fit to provide additional cables (unless they are hidden somewhere), so I found an appropriate aspect 6 pin to 4 pin in a cable tray.

    Before I attach to it, can someone please tell me if this is appropriate?  This is the cable:

    There is a connector 6 pin (with 4 of those who actually connections and two draws) on one end, four connectors from Molex Garland along the cable (two visible in the photo) and a small connector 4 pin (perhaps for diskettes) at the end.

    Before I risk this connection to the machine, can someone confirm that Dell now uses the standard power supplies?  I know that in the past Dell used pinout owners who would fry a motherboard not Dell.

    Is what I have above duly standard now?  Thanks for your advice.

    Because it is a 3rd party device, we are unable to confirm its full functionality. However, I can confirm that we use standard power supplies.

  • Replacement of power SUPPLY Dell Dimension 5000 block

    Hi - I have a Dell Dimension 5000 (around 2005) with a duff ATX PSU.

    Dell p/n is CN-OC5201-17972-51R-1CNV and the model # is N305P-00

    I looked on this forum and the recommended not only equivalent Dell PSU (Antec TRUEPOWERII IPTI-430 430W ATX12V 2.01 Power Supply) does not seem to be available (UK).

    Does anyone know of a compatible brand/model power supply that I can replace my diet duff with or where I can get a direct replacement from DELL for a reasonable price?

    I think my power supply DELL has these connectors:

    P1 - power of card mother ATX 24-pin
    P2 - 4 motherboard power PIN
    P3 - 4 SATA connector
    P5 - Ditto
    P7 - connector floppy 4pin
    P8 - 4 Molex power connector pin
    P9 - Ditto

    Any help would be appreciated...

    Thank you

    yydelilah

    Corsair is an excellent brand of food, with a good warranty

    The Corsair CX 400W ATX2.2 Power Supply, would be compatible with the Dimension 5000.

    Bev.

  • Inspiron 531 does not completely start upward after replacing the power supply?

    Hey people. This Inspiron 531 since 2007 and he has been a champion for me. In the past months, the power supply fan start getting real loud (intermittently) so I finally looked around and found the same feed Integrator Delta on ebay. Put him in this afternoon very carefully, but while doing the 'blue' cable hard drive that connects to the motherboard is out the motherboard. There are two connections on the motherboard, SATA 0 and SATA 3. I have no idea who it was so I tried it reconnection to SATA 0 (which was blue too) and all turned on. There, I sat on the DELL screen and no full boot. Shut down and tried the SATA 3 connector and basically the same thing has happened although there was some funky boss on the lower part of the screen and still no full boot.

    Any ideas or suggestions?

    Updated - I should also mention this power connectors P4 and P7 were not used until I swapped out.

    And also when I try and start I get the DELL screen that shows the F2 and F12 Boot Menu on the top right of the screen.

    jodeluxe

    The primary C: / SATA HDD, is connected to SATA 0 connector motherboard.

    Are the P1 24 pins and power connectors 4 pin P2, connected to the motherboard?

    Have you tried to remove and reinstall all the memory modules and the power data cables in front and all the readers and motherboard, to see if that makes a difference.

    Check the power LED button reading, is stable blue, flashing blue, Orange fixed, blinking Amber?

    Are there any 'beep', if there is, please publish the sequence of them?

    The Inspiron 531 Manual of use and troubleshooting is here:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-531_owner%27s%20manual_en-us.PDF

    Bev.

  • WHERE CAN I FIND DELL INSPIRON 660 REPLACEMENT POWER SUPPLY?

    IM WORRIED ABOUT SPARE PARTS ON MY DESK OF 660 4 YEARS OLD DELL INSPIRON.

    WHERE CAN I FIND THE BEST MATCHING OF PSU FOR MY PC... [Admin NOTE: maintain the label removed in accordance with the TOU strategy]

    PLEAS RESPOND...

    Thank you

    JACKSONFRANCIS

    Here in the United States:

    https://www.Amazon.com/Dell-Inspiron-computer-HU220NS-00-HK320-82FP/DP/B00S8VAGH0

    Here in India:

    http://www.keyboardshop.in/keyboard-express-p.php/23+Dell+Inspiron_660S+power-supply

    Bev.

  • Request for block of power SUPPLY Dell optiplex 7040 Mini-Tower

    I intend to buy optiplex 7040 MT at end of game. So I would like to know:

    1. the motherboard has the processor power connectors and standard motherboard or owners?

    2. is it possible to replace the stock power supply with a cooler master extreme power 600W more? If not, what more than size of power supply fits there?

    3. is it possible to mount a gtx 1080 in there?

    Hi iamprateekprakash,

    We do not recommend that it works because it has not been tested but according to your discretion, you can try, but as you rightly noted that it might void the warranty with Dell.

  • Can I replace the power supply on my desktop dell?

    I have the dell Inspiron 3847-3850BK and it's an inspiron with i3 processor. And my question is, can I replace the power supply on this desktop computer... The PSU is a l300nm-01. And also the PSU, I own the ATX form? NOTE: NOT THE MINI TOWER.

    Skrullknight

    I have the dell Inspiron 3847-3850BK and it's an inspiron with i3 processor. And my question is, can I replace the power supply on this desktop computer... The PSU is a l300nm-01. And also the PSU, I own the ATX form?

    Skrullknight

    Yes, the Dell Inspiron 3847 Mini-Tower can use generic power supplies ATX, with either a power connector 24 pin or 20 + 4 pin card mother main, with or without the on/off switch.

    You should be able to buy a compatible power supply either a local computer or online store.

    Note: You need a diet with four SATA power connectors.

    Bev.

  • Power supply Dell Inspiron 530.

    Have a desktop Dell Inspiron 530 which is a few years old, but has been a wonderful computer. I think I need to replace the power supply because I have trouble from it occasionally. How to get a replacement power supply for it please?

    johnvictor

    Have a desktop Dell Inspiron 530 which is a few years old, but has been a wonderful computer. I think I need to replace the power supply because I have trouble from it occasionally. How to get a replacement power supply for it please?

    johnvictor

    Assuming you have an Inspiron 530 mini tour and not the version of 530 s slimline.

    A power supply Dell OEM Inspiron 530 MT 350w, can be purchased from here:

    https://www.Amazon.com/genuine-Dell-supply-Inspiron-numbers/DP/B003CO04CU

    Bev.

  • More big power supply for Dell Optiplex 7040MT - please help

    Hi all

    I recently bought a dell optiplex 7040 mini lathe and it came with a 240 watt power supply. I want to update and would like to know what my options are.

    Thank you

    The 7040 could use the same wacky scheme that uses precision T1700.  If this is the case MODDIY has an adapter to convert the 24pin connector 8 pin. Suitable for Dell OptiPlex 3020 / 7020 / 9020 / T1700 so I think the 7040 is the same.

    http://www.moddiy.com/products/Dell-OptiPlex-T1700-PSU-main-power-24%252dPin-to-8%252dPin-adapter-cable-%2830cm%29.html

  • Aurora-R4, seeking to upgrade power supply for a better quality of power supply that is not a brand of Dell?

    OK, I have a R4 Aurora, and in my view, that it comes with a power supply of 875 watt. Not 100% about this though. For now, I want to upgrade the power supply to a power supply, so it can support say double cards video in better quality SLI mode. The problem is that the PSU 875 does not have a rail system unique to 12 volts to 50 amps of power support to handle difficult loads of power and provide ample cooling in the power supply. What I would do in the future, it is out of the current PSU, I now and looking to buy a decent POWER supply unit elsewhere. Reference Dell sells a power supply higher than I can use existing wiring, or should I find another brand of PSU and seek to replace the power wiring? And how is it difficult to install if I have to use a different power supply with a different wiring? Installation instructions?

    2015 edit: Joe got his Alien running on an XFX Pro1250 you read, while the mine is running on the twin PSU Seasonic x 1250, here with a case modded haress:

    I typed my answers below Joe right B4 my Alien arrived last fall & b4 I got much Aurora psu swap knowledge or experience; What follows is an IdeaStorm on how to game-plan & handle swap psu Aurora, with a forum for archives where last year not too many messages in-depth existed on the subject, & Joe here desktop & my own experience of swap, details surface as others have done swaps using the accumulated knowledge we all collection / post in our success stories.

  • Update on power supply for dell 9020

    I want power supply dell 9020? Y at - it suggestions for this model of power supply? EVga supernova nex 750 b2 is a good choice?

    The problem with B1 series being OK and NOT OK B2 has to do with the combined maximum power on the 3.3v / 5v rails being 150W on the B1 series but only 120W on the B2 series.

    http://www.Newegg.com/product/product.aspx?item=N82E16817438066

Maybe you are looking for

  • Tool for basic text disappeared

    Hello I am currently using final cut pro x and recently I lived my base under the column text tool disappeared. On the left side of the image is my current text editor. I used to have the tool base on the right side of the image, as shown below to ch

  • Satellite 1800-314-replacement of the CD-ROM disc

    We have an old Toshiba Satellite 1800-314 the CD-ROM drive appears to be failing - it often will not recognize a CD, or run the applications of one. First of all, the CD-ROM drive is not removable, so the laptop must be open. I'm familiar enough with

  • Qosmio G10 - "noisy" red screen at boot

    I get a "noisy" red screen rather than on a black background while booting. During use, wallpaper is a mass of verticle blue lines.18 months ago, I had to replace the motherboard due to lines red verticle - cost of £400. Does a similar problem?

  • Installed 8.6.1f1 Patch - LabVIEW has now "no license available".

    I just installed the Patch - 8.6.1f1 and now LabVIEW refuses to start.  I had a look in the License Manager and the key is there, but when I try to launch LabVIEW, it is listed as "no license available".

  • UiApplication using PopupScreen

    Hi all This is my first post on this amazing forum. I read through many large threads with lots of answers to the questions I had in my short time developing applications for the BlackBerry smartphone. Unfortunately, I hit my first stumbling block, w