Applications cannot run using the latest device software and SDK

Similar Questions

• HP Officejet scan cannot be run, error "Scan cannot be performed because another program or computer uses the network device.

  Hello everyone,

  After you have installed Windows 8 on my desk, I lost the ability to scan with HP (Officejet 8500 pro wireless) solutions Center. Wen I click on scan (rather photo or document) I get a message: "Scan cannot be performed because another program or computer uses the network device. There is a little information on the HP site. I've tried all the suggested solutions, including several install and reinstall the HP software. The printing part works very well, and I can scan with other programs directly using the WIA driver. Now I scan documents to pdf authorizing searches, who wants me that this question be set quite often. Currently, I use my laptop for that. Everything works very well with Windows 7.

  Any help would be appreciated.

  Thanks, Johann

  I contacted HP about this specific problem.  They informed me that it is an upgrade of Windows 8 that Twain issue and they do not support this problem.  Reinstall the current drivers of hp does not help.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Buning CD error: "Windows Media Player cannot burn the files. ... Install the latest device driver"

  original title: when I try to burn a cd, I get the following message

  When I try to burn a cd, I get the following message: "Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. "I just burn a cd of two days using a blank of the same pack then, what's the problem?  I installed itunes.  Could be the problem?

  Hi AnnaMiller,

  You can try reducing the burn speed to see if that solves the problem.

  1 open Windows Media Player

  2. click on the burn tab

  3. click on the burn icon options (windows with the box on the right)

  4. Select burn more options...

  5. click on the burn tab

  6. in the general section, change the burn speed.

  7. click on apply

  8. click on OK

  
  

  If this does not resolve the problem, make sure you have the latest drivers for your DVD drive. You can locate the drivers on the Technical Support Web site of the manufacturer of your computer.

  1. download the driver from the manufacturer's website and save it to your desktop so that it is easy to locate.

  2. click on Start

  3. right click on computer

  4. Select Manage

  5. Select Device Manager

  6. develop CD-ROM/DVD-ROM readers

  7. right click on your device

  8. Select Properties

  9. Select the driver tab

  10. click on set to update driver

  11. Select Browse my computer for driver software

  12. click on Browse > Desktop > and then select the file that you saved

  13. click OK

  14. click Next

  
  

  You can also run the Media Player troubleshooting utility to reset the media player to its default settings.

  1. click on Start

  2. click on Control Panel

  3. Select Troubleshooting

  4. Select programs

  5. Select the Windows Media Player settings

  6. click Next

  7. Select apply this hotfix

  8. follow the remaining instructions.

• Cannot run chkdsk - Chkdsk cannot run because the volume is in use by another process.

  original title: can I run chkdsk on win xp home, but when I try to use switches, I get cannot lock the current drive. Chkdsk cannot run because the volume is in use by another process. HELP PLEASE

  I run chkdsk without switches on win xp home. I told myself I file error and to set running chkdsk with /f. but when I try, I get the cannot lock the drive, chkdsk may not run because ect...  I tried in safe mode, same thing. I sfc/scannow, but it has not fixed the problem files. help please

  It's normal.  You can not run a check disk on your system disk because your system is to use.  The Message you get should ask you if you want to run it at the next reboot.  You must answer 'Yes' to this message, and then restart your computer.  A disk check should take place as it is restarted.

  FYI: A check disk can take hours if you have a large drive or there are a lot of problems on the disc and you cannot use your machine while the scan is in progress.  Better to operate during the night.  Also, I got checkdsk completely erase the hard disk to the point where the only option was to reformat and reinstall Windows.  Make sure that your data available are well-supported before running Chkdsk.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Chkdsk cannot run because the volume is in use by another process

  My computer was working fine until last night. Now when I connect I get a blue screen saying that the computer shuts down to prevent further damage from happening. I tried to restore to an earlier point in time when my computer was working but then I get the error:

  The OS disk (C :) has errors.
  Windows has detected corruption on OS (C :) file system. You should check the drive for errors before you can restore it.

  So I'm going to run the chkdsk utility, and I get the error:
  Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts.

  I'm confused because the chkdsk unility usually works, and I have no idea why she is being used by another process. I am clearly not very good with computers. I tend to do a lot of spywear and adwear on my computer. I have Spyware Doctor that removes any infection.

  Help, please. I've tried everything. Thank you.

  Asha22,
  It appears from your last post why chkdsk did not run on reboot and you gave an incorrect message is that you did not a space between the volume and the f number.  The correct syntax is:

  CHKDSK c: /f

  You can also run the utility disc in this way:
  http://windowshelp.Microsoft.com/Windows/en-us/help/bc1393cf-9f9c-79C7-0f91-9337c2c41f811033.mspx

  1. open the computer by clicking the Start button, click computer.
   
  2. right click on the hard drive you want to check, and then click Properties.
   
  3. click on the Tools tab and then, under check for errors, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
   
  4. click on start.
   
  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will need to reschedule the disk check for the next time you restart your computer.

  The reason that it says that the disk is in use by another process is because it is in use by the operating system (Vista), and that's why it must be run at startup, before the operating system loads fully.

  Another utility, you need to perform is the System File Checker, if you can get your computer to start, either normally or in Mode without failure.
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Let us know what these tests are and how we can also provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do I reinstall the old applications backed up using the backup recovery mgr software

  I fell off my machine after reloading some files of the .NET framework.  Because windows is more loaded, I used the HP recovery discs and made a backup complete both DVD and USB from my hard drive.  Then I went ahead and allow the recovery disk reformat and reload the factory system.  I went to use the recovery to re - install all applications and files, but it only copied all the stuff in a folder on my drive C:\.  IF ten to twelve apps (quicken, genealogy, adobe paintshop & pdf, MS SQL) are not loaded. It seems that my entire system sits in a file folder.  Great if I wanted to only data, but I really want to use applications without reloading everything from scratch.  I found no executable file to start such a reload. I was happy with my machine before the accident, and if I could do a simple recovery from before I installed these files, I would have done it instead of the reformat.  Alas, whatever the back backwards, I went, windows was pretty much DOA.

  I have a HP Pavilion with win7.

  Is it a lost cause?

  The HP Recovery software backup only a specific list of types of data files and the folder they reside in. No programs were backed up, and even if they were, they would not work properly. You will have to reinstall all the software that you previously installed.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• BlackBerry smartphones how to obtain the latest device for the 7100v 1.8.0.138 platform software?

  How to get the latest device for the 7100v software (platform is 1.8.0.138, which is relevant?)?

  Thanks for your help!

  Cheers, cazz

  Hello!

  Your provider through this Portal:

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Good luck and let us know how it goes!

• LightroomCC2015 just disabled use.stating I need to purchase a license. I'm running on the plan for this and other applications. How do I fix this, please?

  LightroomCC2015 disabled just use of the develop Module. Indicating that I need to buy a license. I'm running on the plan for this and other applications. How do I fix this, please?

  Please see the troubleshooting section below.

  Reference: creative judgment Cloud 2015 to return to the mode of trial

  Let us know if that helps.

  Kind regards

  Mohit

• Can satellite P300-20R - I use the latest drivers from site Web AMD/ATI?

  I got a Satellite P300-20R now I want to update the video card drivers - ATi HD4650.

  Can I use the latest Catalyst for the mobility card that I find on the AMD/ATi website, and what is the procedure?

  Toshiba drivers are tested and adapted for certain graphics cards. Driver Toshiba will not force the graphics card to run the highest level and therefore protect laptop from overheating.

  On my Satellite P300, I use Windows 7 32 bit and driver Toshiba. It runs stabile and I'm happy with it.

  To be honest I don t want to use ATI driver and unfortunately cannot give you an answer to your question.

  Can you please tell us which of operating system you are using and what version of driver you want to install?

• Application that runs in the background

  Hello

  I have an application which auto runs on the boot device. Currently, the application runs in the background.

  The application is supposed to display a popup to the user screen whenever they capture an image using the native camera application. In the popup screen is a textfield where the user can enter a tag for the captured image.

  The problem is after I have capture an image, I don't see the pop-up screen. Only when I get the app I see the pop-up screen. So, how to display the popup screen without having to enter in my application?

  Any help is very appreciated!

  Thank you

  Saket

  You can use requestForeground to bring your application to the top.

  Another option would be a global popupscreen.

• Differences between the version of BlackBerry Device Software and platform. Help, please...

  Hi guys!

  I'm really confused... Help, please!

  We have developed applications for our customers. We tested with our BB8700 and it works fine.

  We used JDE4.2 for development... and we think that it will work on v4.2 based handsets.

  But our customers wrote that it works on v3.7. Why? Is this possible?

  I looked at the information about my 8700 device and then noticed: v4.2.1.107 (platform v2.3.0.84)

  -What are the differences between the version of BlackBerry Device Software and platform?

  Possible customers spoke of version 3.7 of the platform?

  There is a list of the devices, where we can find the version of BlackBerry Device Software by BlackBerry device model?

  Or where we can find information about the models of devices that will support our application?

  Thanks in advance!

  AFAIK there is no version 3.7 platform.

  Customer talking about the OS version.

  So, if they have the device OS version 3.7 you must use JDE JDE 3.6, 3.7 or older.

  Or take updated device OS if the necessary software is available.

• I have an account but cannot modify/use the tools.  I went from computers a week ago.  Help, please.

  I have an account but cannot modify/use the tools.  I went from computers a week ago.  Help, please.

  It should not, but you will need to download the right software to use. Adobe Acrobat Reader is what you are currently using. This is why you don't have the tools you are used to.

  Adobe Acrobat (not Reader), that's what you signed up for. He has the tools, you need and are a completely different, even if application you may have initially subscribed by using Adobe Acrobat Reader.

• Why the first Firefox page tell me that I do not use the latest version when the "about" in the menu help says I?

  I updated Firefox 2 days after seeing the message that I was not using the latest version. Download and install led and everything seems to work normally except that I still have a message on my Firefox home page telling me that I'm not using the latest version. If, on the other hand, I navigate to 'Firefox' - 'help' - "On Firefox" I tells me that I'm running Firefox 8.0.1 and "Firefox is updated.

  You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained. You seem to have Firefox installed with the latest version 8.0.1.

  If you want to than the Google search page as homepage, change your homepage to Subject: House (a new update version is now integrated into Firefox).

  • See-> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
  
  You can also see your version on the help > troubleshooting information display

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin

  * Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox

  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• It is possible to reinstall Windows 7 using the Windows 10 software, in which I would buy and use?

  Original title: problem of Installation of Windows 7.

  Hello

  Recently, my computer has not been doing any internet access and I thought to reinstall Windows 7.

  But I can't do that because I lost the disc and key product :( (shock)

  So I thought I would buy a new one, but with Windows 10.

  So I have two questions:

  It is possible to reinstall Windows 7 using the Windows 10 software, in which I would buy and use?

  If I decide to buy online, some say it's downloadable, how can I reinstall it without using a CD?

  Hello

  Recently, my computer has not been doing any internet access and I thought to reinstall Windows 7.

  But I can't do that because I lost the disc and key product :( (shock)

  So I thought I would buy a new one, but with Windows 10.

  So I have two questions:

  It is possible to reinstall Windows 7 using the Windows 10 software, in which I would buy and use?

  No, Windows 7 and Windows 10 require unique product keys and their respective installation files.

  If I decide to buy online, some say it's downloadable, how can I reinstall it without using a CD?

  Windows 10 is available as a digital download:

  Buy Windows 10 family/professional edition

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?