mobile control to an another splitter pane

Similar Questions

• ADF Mobile: give application to another person for iOS

  I am building an iOS application using ADF Mobile. My friend another is in a remote location.
  For android, I can easily create an apk and send it for him but for iOS while creating a configuration profile it ask for the device id. So, looks like I can't do the same in the case of iOS for him to see and test on his device.
  is that correct or I missed something?
  
  Please notify

  Vik2 wrote:
  I have a license and to generate the provisioning certificate, he asks me the ID unique to my device.

  so once I have provide it then the profile will be just on my phone. How my friend will be able to get the app on the phone even with the source code? used to another license?

  Your friend must save his camera as well (with Apple) before it can deploy in its device.
  If you need basically to do the same process you did.

• bind the cfgrid controls to an another cfgrid

  I have a cfgrid;
  
  < cfgrid name = "CompQry" format = "html" pagesize = "10" striperows = "Yes" height = "320" width = "580" font = "Verdana, Arial, Helvetica, sans" fontsize = "12" align = "left" bind="cfc:/components/tsiadmin.getCompanies ({cfgridpage}, {cfgridpagesize}, {cfgridsortcolu minutes}, {cfgridsortdirection}, cname # #)" selectmode = selectonload 'row' = "true" > "
  < name cfgridcolumn = "CompanyRecordNumber" header = "Number of Comp" select = "yes" >
  < cfgridcolumn name = 'Name' header 'Name' = >
  < name cfgridcolumn = 'City' header 'City' = >
  < name cfgridcolumn = 'State' header 'State' = >
  < / controls cfgrid >
  
  
  And I need to link the selected line to another grid;
  
  < cfgrid name = "IndivQry" format = "html" pagesize = "10" striperows = "Yes" height = "320" width = "580" do = "Verdana, Arial, Helvetica, sans-serif" fontsize = "12" align = "left" bind = "" selectmode = selectonload 'row' = "true" > "
  < name cfgridcolumn = "IndividualRecordNumber" header = "Number of single" select = "yes" >
  < name cfgridcolumn = "First name" header = "First name" >
  < cfgridcolumn name = "LastName" header = "Last Name" >
  
  < / controls cfgrid
  
  
  The first grid is a list of the companies and the grid secord is supposed to be a list of all the selected company. I see that I have a piece of code is missing. I don't see how I can bind to a cfc on the second grid which will be returen a query based on the selected line in the first grid.
  
  

  larksys wrote:
  > I don't see how I can bind to a cfc on the second grid which will be
  > returen a query based on the selected line in the first grid.
  >
  >
  >

  see if this helps:
  http://www.coldfusionjedi.com/index.cfm/2007/8/9/reacting-to-grid-row-selection

  --

  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com

• How can I control the size of the pane name displayed in the Message pane window?

  When I open a message, a full name (the raw message content) opens as a window in the upper part of the window of the Message pane. I have this display smaller window name (fit) while maintaining the ability to scroll. By dragging the edge of window display name would work well. Alternatively, the possibility to switch the display name and disable as F8 active / deactivate the messages pane.

  I noticed the address book display name feature, but very few of my messages or inscriptions in the book to meet the need.

  Looks like you display the full headers as giving the scroll describe you. But there is no way to drag the section header of a smaller size because it is attached and part of the Message pane.

  There is a setting to reduce the headers, but this removes the scroll to display the full headers. I tend to use this point of view, unless I need to see the full headers.
  Display > headers > Normal

• access to the controls of an another VI property

  Hello

  I have A.i and B.vi. B.VI has Integer1 control.

  Replace Integer1 value (Value property) A.i I can use "control valueand" method.

  Maybe it's to change the other properties (for example, disable) Integer1 of A.i control?

  Thanks, Andrey.

  Here's one way around around, but it will work.  Personally, I recommend the driving force.  It'll be more flexible and easier to maintain.

  

  Don't forget to close all your references or you could accidentally leave A.i in memory, even if it stopped running.

• control from an another VI VI

  I have a little problem on the control of the other VI VI. I have attached the sample of the screw which works similar to my request.
  The screw attached, TryOut2.vi lets you stop the counting of the TryOut1.vi. The stop button to read only the logic of TryOut2.vi value only when it starts, but when you press the Stop button of TryOuy1.vi TryOut2.vi, the TryOut1.vi will not stop. How the TRyOut1.vi can be controlled by TryOut2.vi

  Thank you

  Thank you, I thought about it.

• How can I control a .vi another State machine?

  I've written a VI which is an event focused on the state machine.  Events are operator actions that take place on closing buttons on the front panel.  Each event features one or more state names on the queue of the State.  A state machine then takes the name of the State off of the queue of the State and use them to open the case, containing the functions to be performed... Now comes the desire to interact with this vi programmatically to an another vi.  Given that events cannot be triggered remotely because the keys are of type lock and cannot be manipulated by the property node (value (signal))... Is it possible to add a name from State to State in Quebec to distance... ?  It would be nice.

  I prefer not to add the buttons 'hidden' for the original vi, or perhaps to change the structure of the event.

  Is there a better way...?

  Hummer1

  You use 'Get in line' with the same name in the other VI or using a functional Global Variable to pass the reference of queues for the other VI.

  Then you write the State via 'Element of the queue' names as you would in the VI containing the state machine.

• Switch off the mobile control

  Hello

  In my application when I am on my second screen so if we press and hold the end call key then mobile BlackBerry becomes off Switch and here even if we have on the mobile by pressing again on the outfit, the button end call then mobile is on. But if we go to my application icon, and then click then it shows the same second screen. My requirement is we can disable the option to switch off the mobile and hold pressing the end button Via Code. Or is - it possible to disconnect from the application when calling is pressed and hold the button for switching off the mobile.

  Hi peter_strange,

  Thanks for the reply you said implemented SystemListiner and could handle switch off. Thank you.

• A control PC in another PC LabVIEW LabVIEW

  My specifications:

  1 PC1 with Window XP - act as a controller and setting of parameters DAQ (time/div, as tension/div)

  2 PC2 with Window 7 - act as a module of data acquisition with NI 5105 digitizer.

  3 LabVIEW 8.6 for two computers.

  My questions:

  Is it possible to get reach PC2 PC1 setup information so that the DAQ module can peformance according to the setting of PC1 reference?

  Please advise me and thank you in advance.

  run both programs

  one master

  a slave

  use tcp/ip as a communication protocol

• Two vCenters and mobile from one to another ESX host

  I have an existing vSphere environment where all virtual machines on the local drive. This environment is managed by a physical vCenter Server.

  I've built a WHOLE new environment with three hosts and each has 4 Sockets, 6 hearts with 128 GB of each host. I also created a new vCenter Server and it is a virtual machine. All are connected to the iSCSI SAN.

  I know that the ESX hosts can be managed by a vCenter server at a time. Now, I want to add old esx hosts that have virtual machines on a local drive to the new environment that is connected to a shared storage. When I try to add a host on the new vcenter server, I get a message saying that the host is already managed by the old server vcenter and if I add it to the news that it disconnects. Which is the best way to do it, or should I disconnect hosts from the old server vcenter first?

  Also how I will move the virtual machines on the local disk to the San. I have company over 4.1.

  Thank you!

  I unplug and remove the host from the old environment and then add the host in the new.  This will allow your guests to continue to operate.  Once you have hosts in the new environment, you can use sVMotion (right click to migrate, move the datastore) to move your guests to a shared storage.

• Control of an another MC MC

  Hi all

  I'm a noob but I tried google and textbooks but can't find the answer that will be probably simple.

  I have 3 movieclips on frame 1 of the main timeline.

  The instance names are mc1, mc2, mc3.

  Where mc1 is at the end, mc1 must go to frame 2 but mc2 must go to the next section and stop.

  Then, when mc1 is at the end, again, the same thing must happen.

  I have the last image of mc1 chronology:

  gotoAndPlay (2);

  But with what line of code mc2 will go to the next section?

  Thanks in advance

  Delah

  its important this place ypu the abobe posted code inside of an Enterframe function, otherwise it only will be triggered once at the beginning of your application, as follows:

  import flash.events.Event;

  function checkFrames(e:Event):void

  {

  trace ("mc1-PLAYHEAD is at:" + mc1.currentFrame + "" + mc1.totalFrames);

  trace ("mc2-PLAYHEAD is at:" + mc2.currentFrame + "" + mc2.totalFrames);

  trace ("mc3-PLAYHEAD is at:" + mc3.currentFrame + "" + mc3.totalFrames);

  do things according to the State of the different Playheads

  If (mc1.currentFrame is (61))

  {

  MC1.gotoAndPlay (2);

  MC2.nextFrame ();

  }

  }

• Listen to change a control made by another control programmatically

  Hello

  I have a combobox (A) with a listener for a change of user.  I have a second combobox (B) similar.

  I want to have a listener that fires on A when B has an interaction.

  So for example, if B is changed, I want the selectedIndex property has changed and an event on a fire to pick up of the item associated with this Index, but I can't find an event that is based on the change.

  The selected index is currently defined by an int can be bound to a modelLocator (Im trying to stay true to cairngorm!)  I thought that I may have found with ValueCommit but no luck.  I am able to change the property SelectedIndex has via the bound variable, and I know that I could do something similar on the selectedItem, but I want to work out if its simple to trigger an event of in Combobox (A)

  I know it's hard to imagine with no code - but any ideas? -Since I started trying to use the concepts of Cairngorm seems to hit this problem quite often.  Usually, the code would be in the same place and I could access through the Ids, but as they are in the difference AS removing its not as simple.

  Cheers for any help

  Why cling to this creature dead called Cairngorm.  But alas, this is not your issue. Maybe this will get your rocker Rollin '

  Here's how I usually made with a presenter model when I need the selection between two related dropdown comboboxes/lists

  private var _selectedItemA:Object;
  [Bindable (Event = "selectedItemAChange")]
  public function get selectedItemA (): Object
  {
  Return _selectedItemA;
  }
         
  private var _selectedItemB:Object;
  [Bindable (Event = "selectedItemBChange")]
  public function get selectedItemB (): Object
  {
  Return _selectedItemB;
  }
         
  public function set selectedItemB (value: Object): void
  {
  _selectedItemB = value;
  Perform the calculation/logic here

  ///

  ///

  ///

  ///
  _selectedItemA = resultOfLogicCalculation;
  dispatchEvent (new Event ("selectedItemAChange"));
  dispatchEvent (new Event ("selectedItemBChange"));
  }

  The logic of selectedItemA resembles the logic for selectedItemB.

  .

• Only I have access to Firefox for Mobile and need to add a new device.

  Is it possible to use your mobile phone to add another device? The device seems to be an obvious tool to be able to add another computer - travel in particular. His absence here is problematic for many reasons.

  If I understand you correctly...

  You must have access to the 'new device' in order to add this device.

  For example, you cannot add your desktop PC to your portable device Sync when you're on vacation. You need Setup Sync on the desk before you left on vacation.

• How to create a nested local variable control custom?

  I inherited code which has a cluster of CTL control nested inside another group of control CTL.  If I drag the control nested outside the border of the other, I can right-click to create a local variable, I need to connect to the bundle name.  However, as soon as I drag the inside the limits of external control, it breaks the local variable.

  How can I create a local variable in a cluster THAT CTL nested in a second group CTL?

  Is there some kind of reference OuterCluster.InnerCluster, that I can use if I do a local variable of the external group?

  It turns that I need a local variable for the cluster internal.

  JPG attached shows that I created a local variable for the external cluster (ParametersCluster), used a Unbundle based on the name to access cluster internal (EmptyParmeters) and can access one of the elements through an another Unbundle by name.

• can't see the front panel control

  I took over a program written in LabVIEW 2013.

  When I right click and select find control on a control path in the block diagram, the Panel is displayed, but I do not see the trajectory control.

  Control is not * hidden, because the choice for the control to hide to the shortcut menu is available.

  The façade is divided into two with a separator. -What is the cause?

  EDIT: The control is in the left pane. Y at - it a trick to know is where is the control?

  I guess that's outside the visible Panel. Maybe if you double-click on the terminal, the control is selected, and you can move with the arrows until you see.