bind the cfgrid controls to an another cfgrid

Similar Questions

• Why the page automatically scrolls to the cfgrid controls

  I have a page that is large enough so that it scrolls vertically. When it finishes loading, the browser scrolls automatically to the bottom of the page where a cfgrid element. It happens in IE, Chrome, and Firefox.

  I reduced the cause down to the JavaScript server ColdFusion 11 adds at the top of the page. If I disable scripts in the browser, the page does not automatically scroll down.

  Addition of window.scrollTo (0,0) at the onload of the body does not work. What JS is scrolling down occurs after the onload event. I have not tried. ready() jQuery yet; in the hope there is a fix.

  Has anyone else seen elsewhere and don't know a fix or a workaround?

  I found that the solution is to add the attribute selectOnLoad = "false" to the cfgrid tag. Its default value in CF11 is 'true '. I'm not sure CF10, but in CF9 is seems to default to 'false '.

• Binding the controls on the front panel programmatically

  It seems that Programmatic binding the controls on the front panel do not work when they are located in a tab control.

  Is this a known problem in LV 8.6?

  If the control of the façade is already bound to a URL of PSP you can link to another URL using DataSocket URL property during execution of the VI.

  

  If the front panel control is not bound to a URL of PSP, then you cannot attach it to the URL of the PSP when the VI is on. You can use the method AttachDataSocket of VI to change the link while the original VI is stopped (in edit mode).

  

• Bind the control to the chronology of the effects with the chronology of the sequence

  This should be simple, but I can't work on how do it. First CC missing this obvious feature or am I a fool (don't answer that)...

  So, here I am, the editing effects - say for example I want to stay in an audio quickly melted and melted to hide the little noise. I want to zoom on the chronology of the effects that I can tune the exact position of the keyframes.

  The zoom in the effects window slider is time consuming and is not automatically Center on the frame that is currently selected in the sequence, in order to keep track of it and ending once zooms are really hard. Zoom on the chronology of the sequence control does not have these problems.

  SO, as I'm sure there is a good reason why my timeline effects and the chronology of the sequence does not relate normally is there a way to force this so that when I zoom the sequence of the clip (If selected) in the timeline panel?

  I don't make any sense?

  Any advice (other than "have you tried turning market again?") received with gratitude.

  Howie

  As Jim said, there is no way to bind the zoom level of the effect controls panel and the timeline. And you're right that zoom through the horizontal slider can be clumsy, lose the read head. However, if you zoom in/out keys, around here! The read head is properly centred.

  As for not being able to zoom in all the way, I never encountered this problem. If you can fill in details of the case when it won't zoom in completely for you, I'd be interested. However, one thing you might try is switching the effect controls panel to show Audio time units. In this mode, you can zoom in much more far.

• How to bind ResourceBundle to FXML that describes the custom control?

  What follows is FXML that describes the custom control:

  <fx:root type="javafx.scene.layout.VBox" xmlns:fx="http://javafx.com/fxml">
    <TextField fx:id="textField"/>
    <Button text="Click Me" onAction="#doSomething"/>
  </fx:root>
  

  Can we use the resource group as:

  <fx:root type="javafx.scene.layout.VBox" xmlns:fx="http://javafx.com/fxml">
    <TextField fx:id="textField"/>
    <Button text="%buttonText" onAction="#doSomething"/>
  </fx:root>
  

  with the choice of locale like ResourceBundle.getBundle ("database name", local); If regional settings are specified in the main Application that uses this custom control.

  Thanks for the explanation to anyboby who has related knowledge.

  The problem is the synchronization between the local parameter that defines the main application and the locale for the custom control to use in FXML. Thanks for help

• For the remote controls of the Keynote?

  I want to use a remote control for a presentation in Keynote, I'll give.  It will be my first with a remote control, but which is later - should I buy a (If Yes, who?) or what is the last and the best app for me to use my iPhone as a remote control (which I prefer, a gadget to lose less!)?

  Please use a simple language with me, a digital native.

  I use my aging MacBook Pro with OSX 10.7.5, my speech is 5.1.1 and my iPhone is a 6s.

  Thank you!

  Using a method rather than another is a personal preference, my preference as a coach and lecturer working in several different locations is to use Keynote for iOS, it has built in the remote control feature:

  Tap to go to the next slide

  previous slide scanning

  Pen tool marker on the screen

  the highlighter to screen

  the iPad displays the screen of the presenter, showing the next slide and notes of the speaker of the presentation on the Mac

  

  There must be a wifi network present, you can connect; many businesses teaching institutions lock unregistered users by default

  The site Web of Keynote iOS is here: Keynote for iOS

• Where the ACTIVE Control Panel

  where can I find the control screen to set the font size

  In general, you get the best results using the Zoom feature. Proportionally, this increases the text and images on a page and minimizes the weird glitches.

  This article describes how to use the Zoom for a given site: the font size and zoom - increase the size of web pages

  If you want to 'zoom' to all the sites at one level by default, you can use one of these modules:

  • Default FullZoom Level
  • NoSquint

  Or if the problem is with Firefox menu and text of the toolbar, rather than the pages, there is an another add-on for: police theme & size changer

  Who help me?

• I have two Apple TV. The remote control that interferes with the other. For example, if I press stop on the distance she also those other programs. How to do this?

  I have two Apple TV. The action on each distance affects the other tv. For example if I press stop on the remote control will stop the program on the other tv to. How can I stop this from happening?

  Easy.  You must associate each ATV with one of the remotes.  Each ATV is not paired and will 'listen' to any distance.

  The trick is to cover before the other ATV when matching so the two do not listen.

  Silver or white remote control: pair or cancel the twinning of the Apple Remote with Apple TV (3rd generation or earlier)-Apple Support

  Siri remote control: http://help.apple.com/appletv/#/atvbc9953e63

  Don't know what models you have the ATV, but the whole process is the same:

  1. choose a remote control and an ATV.  Cover the front of the another ATV.

  2. hold the remote control in 3 inch they recommend, pair it with appropriate above process.

  3. choose the other remote, unlock the first ATV and block that you just paired.

  4. hold the second remote control 3 inches from the second ATV and pair it with appropriate above process.

  5. release the first ATV and enjoy.

• How can we separate "Icons and text" of the browser control buttons (back, forward, etc.) since the icons on the toolbar of the add-on?

  With us, it is not a problem. I don't know why it's different here at work - even editing, same settings (as far as I know).
  Windows Vista
  Firefox 7.0.1
  Status 4 Evar installed to activate the add-on bar in a status bar

  I have a NoScript module icon in the corner, which works very well. If I add a GreaseMonkey icon in the menu customize, "Icon and the text" is displayed for this icon as the icon and text browser controls (home, stop, etc.). Other icons the module show icon and the text (S4E, for example). NoScript is the only one I've found so far that collapses down to just an icon.

  I like this leads to the bar having a higher status (add-on). Basically what I want is for only the icon is displayed in the State (toolbar Add on), while keeping icons and text in the browser controls. My current solution is simply to remove the other icons of the add-on - it from the status bar (add-on), but which removes the ease of turning on/off and setting options.

  Please tell me if I can provide you with another thing and thanks for your help.

  Edit: I have some screenshots to show what I mean.
  desired behavior
  problem when the icon is added

  I tried, and while it does not remove the text, buttons retain their width, collapses don't not down icons. I was able to get exactly the effect I want to by changing the setting in the DOM, as stated in my post above, but which only lasted as long as the session and returned to the way it was before, when I restarted Firefox.

  After a few tries, I finally joined the userChrome following tweaks. This tweak sets the buttons didn't use any text, be limited to 20 pixels of width, and, if a drop-down list arrow is present, to hide that. Greasemonkey uses a drop-down list item separated so it must be hidden specifically.

  #addon-bar .toolbarbutton-text { display:none !important; }
  /*The following work for most of my icons except Greasemonkey*/
  #addon-bar .toolbarbutton-menu-dropmarker { display: none !important; }
  #addon-bar .toolbarbutton-1 { min-width:20px !important; }
  /*The following are specific to greasemonkey*/
  #addon-bar .toolbarbutton-menubutton-button { min-width:20px !important; }
  #greasemonkey-tbb > dropmarker {  display: none !important; }
  

• Satellite Pro U400-SP2804 - Microphone is not listed in the volume control

  Hello
  I can't listen to the microphone from the speaker, because does not appear micro in the Volume control

  On the start menu< control="" panel="">< audio="" devices="">< advanced="" properties="">< volume="" control="">< properties="">

  Mixing: Conexant HD Audio output

  Volume controls:
  Volume control
  Wave
  SW
  CD

  But n - t apeear option microphone or line

  My sound card is Conexant High Definition SmartAudio 221

  I was reading, and I think the problem is: it doesn't have a key in the windows registry value, someone help me, thanks

  I did: reinstall the driver, uninstall the driver and put another card sound, change the operating system, works wth 2 sound cards, portable computer, import registry values from the other laptop. but does not solve the problem.

  My problem appears with Winodws XP 2002 SP3 and Windows Vista professional

  Hello

  The port microphone or line is not because you are looking for this audio * output parameters.
  The microphone is a device of entry so it s not who listed there.

  If you go into the volume settings > options > properties you can switch to HD Audio input.
  Now you can change the volume of the microphone! :)

  Good bye

• Toshiba 40RL953B has stopped responding to the remote control

  Hi all, my first post and this is a problem.
  I have a 3 years 40RL953B Toshiba tv that is not responding more to the remote and the buttons on the side, it is stuck on HDMI 2 port and works well with deviced plugged which, but I have no control of volume or something else.
  I was wondering if replacing the main Board it would heal or there at - it another way?
  The closest Toshiba repair center is 45 miles away and I don't want to spend a fortune on a 3 yr old TV that does not have the quality of great pic of anyway, but still, I don't want to just Chuck... 4
  Thanks in advance

  Hi all, I have a 40RL953B Toshiba 3 yr old 40 "Smart TV TNT HD, the problem is that he is stuck on HDMI 2 port and will not respond to the remote control or the buttons on the side. It does not work with something plugged into HDMI 2 but I have no volume control, it's ok when woking with a set-top box with no nut no good with the likes of a stick of fire from Amazon.
  What is a defect of the main card? Or y at - there a way to reset the system?
  Thanks in advance

• How to use the "Toshiba controls" with other players?

  Heey

  I have a Satellite with Toshiba controls. How can I change so I can use the buttons for other media players and not only Windows Media Player?

  A dude sorry for the bad news, but I fear that it is not possible to use the Toshiba controls with another application as with WMP (CD) and WinDVD (DVD)
  I think that the utility was already programmed and designed to use only these two applications.

• strange appearance of the digital control

  Hello...

  I met a strange appearance of a digital control, see the below two screen captures.

  Reminder: on a tabpanel, two of several digital controls have been changed programmatically if I put an indicator with a checkbox that is located on another tab of the Panel:

  -control mode is switched / battery hot

  -precision went from 6 to 4 figures to compensate for the space of digital arrows

  These changes are applied to three checks, but only the first (highest) behaves unexpectedly, while others are very well...

  (A) if both attributes are changed, the two top controls look like this:

  

  in other words, the left most of the characters of the control are somehow overlapping, giving the impression of a fat o material

  (B) if only the command mode of the higher control is changed to hot, the following result is obtained:

  

  This makes it more obvious that somehow the two zeros on the left of the control are pressed together.

  Interesting, if I operate the higher control by clicking on the arrow/top down, the result displays (1.0000E - 3) is ok.

  I was much afraid to post this mystery which could well be a stupid mine mistake, but unable to locate a problem in the code, I thought that it could possibly be linked to the issue tab panel reported here

  Comments, suggestions?

  Thanks, Wolfgang

  Hi Wolfgang,.

  I checked your project, and it looks like a bug. I created a CAR. The number is 282946.

  I guess that at the moment, you have to live with it or place the box on the same tab.

  See you soon,.

  RMathews

• Inexplicable delay between the evolution of the tab control pages

  Hello dear OR Forum.

  I have a strange problem.

  In my program, I use a tab control.

  On a change in the pages of pc immediately once the user clicks on the other page, but on another pc it is delayed (approx. 1 second) until the new page is displayed. The rest of the program works with the same "speed".

  You have an idea why this happens?

  The main program includes a while loop with a delay of 25ms. In the loop, there is a case structure, cases are different pages of the tab control.

  (it's the same exe file)

  Thank you.

  Alex

  Tabs changing pages require a screen refresh if at least the graphics adapters could make all the difference.

  More memory in the faster machine...

  The slow mahcine there a virus check or other processes that use CPU?

  Ben

• selection of the ring-control do not work. Cannot select any other item as the first item.

  Dear programmers cvi,

  I have some problems with a control ring in a panel of the CVI. the ring comprises several elements. No matter what I choose, the result will always be the first item. I can't select something else than the first (Recent not necessarily the default item).

  When I redraws the Panel, it works for the next few days. but somday in built version (production-application) the selection of ring control no longer works. When I start the uir-file in the labwindows cvi gui editor, I can understand the problem. Even in mode 'exploit' I can't select other elements than the first.

  When I convert the ring article in another ring (F11 key), and then convert back into the original it works again (1-2 days).

  When the problem appears, the contents of the file is always the same!

  I also redraw the Panel in different versions of labwindows cvi (2010/2012/2013), still the same problem.

  another ring-control on different panels (many more controls) never come whith this effect.

  all the guys there whith the same problem?

  corrupted file IUR is in the annex.

  Thank you!

  Kind regards

  Lukas roeder

  Hi Lukas.

  If you think the UI to be corrupted file, you can

  -Save in a version different (e.g. 2013 instead of 2010) and see if that makes a difference

  -Save it as a text TUI file and re - import (Options / Save in Text Format)