Similar Questions

• Watch OS shows 3 past mode of power with almost total of battery reserve

  Hello world

  I have a problem since I updated my watch to watch OS 3. Watch (series 1) goes into unexpected battery power with an almost total reserve mode. It produces one or two times a day and the only thing that I recognize that the watch remains black when I look at my wrist. It shows only the time in green numbers when I press a button and I need to reboot by pressing the two buttons. After the reboot, the watch displays + 80 or even 90 + % battery life and it works as expected for the rest of the day (if is not the same problem from happening again). Especially my battery is 50 + % at the end of the day.

  Today I reset the watch and recovered from backup, but that changed nothing. The watch went to the mode of power with a range of 78% a few minutes ago

  I am really frustrated because it happens very often and I could not find a solution to this problem. Decommissioning watch OS 2 is not an option...

  Thanks in advance for your help, I am really stuck on this issue.

  Best regards from Germany,

  Matthias

  Hi, Matthias

  If your dial of the Watch includes the complication of the battery, it is possible that accidental screen interactions are causing your issue.

  Tapping on the complication battery indicates the level of battery with a large button to put the watch mode of power reserve.

  You can consider using your watch for a while without this complication on the face of the watch to see if the issue is recurring:

  Change the face of the watch on your Apple Watch - Apple Support

• Automator - how I got a file zip "with replacement"?

  Automator - how I got a file zip "with replacement"?

  I have an action that selects a folder - then creates archive in a chosen folder

  Currently - it uses the name of the source folder, and then brings new archives every time as:

  My folder.zip

  my zip 1 file

  My 2 zip. folder

  I wish there was only a single zip and the new version would ALWAYS OVERWRITE the old.

  Q: How can I get what's going on?

  or how to do that with applescript?

  Hello

  In an Automator workflow, you can use this script in "run AppleScript" action.

  ----

  on track {, parameters} - script for Automator

  -create an archive in the parent folder, it uses the name of the folder, it overwrites one archive existing and returns the path of the archive

  return fileZipper (item 1 of the entry) - entry is a list and it contains the path of the folder

  end of race

  on fileZipper (thisItem)

  tPath thisItem text value

  If tPath ends by ":" and then

  the value text delimiters oTid point

  the value point text delimiters {"": "}

  tPath the text value 1 through the text element - tPath 2

  the point text delimiters oTid value

  end if

  zip (tPath & ".zip") the value as a text file

  shell script "/ usr/bin/Ditto - c k - rsrc - keepParent" & (quoted in the form of tPath POSIX path) & "" & quoted form of POSIX zipFile path ".

  return the zip as an alias file

  end fileZipper

  -----

  This script create a new archive or overwrite an archive existing with the same name as the folder.

  The destination is the parent of the selected folder.

  If you want to move this archive to a specific folder, add "move Finder items" action after the action "Run the AppleScript.

• How can I use the AppleCare with replacements USA helmet in Israel?

  How can I use an AppleCare with replacements USA headphones for my iphone in Israel 6plus? Am I covered overseas?

  Technically, no. The warranty is valid only in the country where the phone was originally sold. However, that restriction is based on the differences between the models of phones sold in different countries and the availability of substitutes service. You may very well be able to get the headphones replaced here since there is no difference between those who were included in phones AND those that are included with the phones sold in your country. Make an appointment at the genius bar or take it to your local CENTER and see what they can do for you.

• Cannot print mode quick project with DraftSight CAD software.

  Hello

  DraftSight is a professional 2D CAD free software available at http://www.3ds.com/products/draftsight/download-draftsight/.  I can't print quick mode of project with DraftSight but can using AutoCAD.  I cannot understand this and would appreciate any help.  Is it a question of DraftSight or HP problem?

  Thank you in advance.

  Model and type of printer: HP DESKJET 5440
  Installed printer driver version: 6.1.7600.16385
  DraftSight version installed: V1R3 x 64

  In general, if only a single program has the problem, it is caused by a conflict between the program and the driver.  Generally it is the manufacturer of the program to resolve the conflict.  You can let them know that it stops, in case they don't already know.  There is workaround that you can try in the meantime.  It is not guaranteed to work, but I had a lot of success with it.  Give it a shot and let me know what happens.  The link below will lead you in the instructions.

  How to assign other print in different Versions of Windows drivers.

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• Windows XP when turn on goes to a black screen with try modes of 3safe with one last configurationbut known dates back to the same place when try one of them

  computer guard reboot throughout the day without ever getting on linekeeps return to black screen with black letteringwith 3 safe to try modes and one with the last known configuration. like the square opens to enter the password it goes back to black with same imformation on screen.

  You may need to do a reinstall or maybe just a repair installation.

  Put your installation cd in the cd-rom drive and restart your computer, you will be asked if you want to repair or reinstall choose repair.

  http://michaelstevenstech.com/XPrepairinstall.htm

  read above site via before the attempt.

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• Storm the conversion compatibility mode a moped with CAP

  Hello

  to make my games work on BlackBerry devices, I use CAP to convert JAR files. On touchscreen devices, I use the Canvas.pointer* events * and everything works as expected on all devices, including the storm.

  So far, my game seems to work with compatibility mode off (i.e. without the virtual keyboard) when installed using the Desktop Manager. This is exactly how I want it to be, but I was just wondering if it is the case by default because that research of this forum, I always read that, by default, an application is running in compatibility mode if compiled with any older IDE (pre 4.7).

  Anyone can confirm the behavior in order to release my game with support for the storm devices without using IDE 4.7 and create an additional project just for the BB Storm. Usually I don't use any IDEs as, over the years, I have developed a large number of tools and scripts to make a huge amount of work required in support of many different devices of J2ME and it would be great if I could continue to do without in the future.

  Thank you very much
  Michael

  It seems that midlets will run without the dreaded compatibility mode.

• Download Patch BP1 on SWlib in Mode offline fails with the error

  Hi Experts,
  
  Download Patch Bundle on SWlib in Mode offline fails with the error on the compatibility of the products
  
  Get the following error:
  
  Invalid data - product of patch 13242776 is inconsistent between the patch metadata file and patch zip file.
  
  Thank you
  s/n

  Hello

  Follow the steps below to download the Patch Bundle 1 (BP1) successfully on software library.

  1. in the 12 c Cloud Control console, access the Provisioning, Patching &--> saved patches--> Upload

  2. Select product family: Oracle product management system

  3. Select product: Enterprise eating Base platform

  4. download the patch zip file and the Metadata XML file.

  5. Select load. This should give the following success message:

  Software download status library
  Software library - Download managed to Oracle software library.

  Best regards
  Vincent

• Problem with REPLACING the clause in Sybase

  I am facing a problem with REPLACING the clause in embedded SQL with a Sybase database.
  
  My Cold Fusion Server is MX 7.
  
  The database is the Adaptive Enterprise/12.5.0.3/EBF 10689 IR/P/Sun_svr4/OS Server 5.8/rel12503/1915/64-bit/FBO/Thu 23 Jan 16:05:19 2003
  
  That is the problem. I have a variable bureau_incode of Cold Fusion, which I use to set the values in my IN clause. When I comment on my request and display this value in the HTML page, bureau_incode has the following value:
  
  ('TAB', 'OGC', 'BIG', 'OLA', "MDG", "SEO", "OSP", "ANOTHER OWD ',' ', 'PSHSB", "CAT", "WTB")
  
  My CFQUERY embedded SQL looks like this:
  
  

  Quote:
  < name cfquery = "qResults" datasource = "#request.dsn #" >
  Select Name,
  bureau_code,
  Telephone,
  Mobile phone,
  Pager,
  E-mail
  Availability,
  Explanation,
  Password,
  Admin,
  last_login = convert (varchar (20), last_login, 0)
  of PAMS where availability = ' don't
  < #request.seltype # cfif IS NOT "ALL" >
  and bureau_code IN #bureau_incode #.
  < / cfif >
  < / cfquery >

• Replacement motherboard and cannot off mode of manufacturing with ALT + F

  I bought a new motherboard of Dell (OCT103) for the Dimension E521.

  I received the card mother, screwed into the computer and everything works fine. But...

  The motherboard has been delivered with the method of manufacturing activated. Now, I have the problem, that the rest in manufacturing systems, although I entered in the new issue of servicetag already many times. I started my computer several times, but there is no chance to start in normal mode. There is always a message at end of boot, that "the system works in manufacturing mode. "Press ALT F to operate in normal mode. By pressing ALT + F for now removes the servicetag in the BIOS again and all settings are reset. Is this normal way?

  On the homepage of Dell, I found information, I have to boot into the BIOS setup and it press ALT + F in the main configuration to disable the mode of production. But when I press those buttons I got a beep, nothing more.

  Please can you tell me how to disable this mode correctly and permanent.

  Thanks for a response

  Hello

  I recently got a new machine (inspiron 660 s) from dell.

  The start screen always displays "mode of production", even though I entered the serial number.

  I tried a lot of keys to try to return to the normal mode, but not worked.

  Finally, I pressed 'Load Defaults' in the Menu output then output parameter of the BIOS.

  Everything became normal. A Dell Logo appears on startup. (Later, of course, I can change all the parameters :)

  Hope this helps!

  Mario :D

• How to not to let Firefox HTML5 mode full-screen with multiple monitors or a window manager tiles

  Hello

  I'm using Firefox (v24.4.0 ESR) mode to fullscreen HTML5 with two screens or a tiling window manager. The problem is, every time the browser window loses focus, Firefox let full screen.

  It seems that it was possible to address this problem by setting the ' fullscreen - api .exit-on-disable ' in ' subject: config', but only up to what Firefox version 21.0 [1]. The option is gone, and even he created manually does not work.

  The web search gave no way to achieve this in a recent version of Firefox. Does anyone know how to get Firefox to stay full screen mode when you leave the accent?

  http://cat-in-136.blogspot.com/2013/06/diff-between-Firefox-220-Beta-3-default.html [1]

  See:

  • https://wiki.Mozilla.org/security/reviews/ExitFullScreenFocusChange
  • bug 724554 - out full screen when we focus on different display window

• How to pass in compatibility mode I have with Internet Explorer?

  I am not able to open programs for my job because the message reads "Sorry, your browser or program is not supported by Web Dynpro!". When I use Internet Explorer & saw this message, I was able to "create Mode' that corrects the problem. I don't know how to correct with Firefox...

  It is not the first time that problems with Web Dynpro are reported on this forum and you may not be able to solve this problem.

  • http://en.Wikipedia.org/wiki/Web_Dynpro

• Spectrex360: Tablet Mode works only with windows 10

  given that I've upgraded to windows 10 revolution to Tablet mode does not work. The screen is not rotating, and the keyboard is still active.

  @Enginestechie,

  Thanks for posting back.  I understand the frustration.  However, the laptop has been designed with an operating system in mind and when you migrate to another OS, there are always bumps on the road, and this has been the case forever.  Keep an eye on the site of hp for updates and versions for Windows 10 assistance.

  Thanks again for the post and have a great day.