MODEL. Error loading of FMB (FRM-18108)

Similar Questions

• FRM - 18108 cannot load the following object

  When I open forms in a 10G suit, getting below error
  FRM - 18108 cannot load the following object
  source module: template.fmb
  source object: STANDARD
  
  Please help me

  Looks like you're working with the Enterprise Business Suite (EBS). The error you are getting is because the forms cannot find a referenced object. This is because the directory where your TEMPLATE.fmb (and the objects made reference to the template.fmb form) is not in your FORMS_PATH. If you use Windows, modify the registry and Add the directory where you have your objects of reference to the FORMS_PATH entry. Make sure you add it at the end of the existing value; not to replace the existing value.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• "Error loading operating sytem!" on Satellite A55

  I'm going to reformat Toshiba Satellite A55 Series for Windows XP. It is said that he cannot reformat the C drive and HDD may be damaged and to quit smoking just press F3, and then I press F3.
  But it said "error loading operation of the sytem!

  What should I do to fix this? Anyone who can help me what about this one?

  Thank you!

  Hello

  If the hard disk is damaged there is a single Exchange of hard drive solution. For this laptop model hard drive isn't cheap and I think that it is better and easier to solve this problem.

• "Error loading operating system" after windows update

  I have an ASUS EeePc netbook model: 1005PEB. Last night before going to bed, I stopped the netbook and it has begun to install and configure windows was last updated. I left on the office do its thing and went to bed. This morning, I got the netbook and it went out of the car and it turned on while I was about to leave the House (before ask you, no I ' was not flying). He started installing all the updates that it had installed the night before. It has gotten to the point where it installed the last element and hung up there. I leave a this screen for 45 minutes and nothing has changed. I went against my better judgment and off the netbook. When I went immediately to turn it back on all I get is "error loading operating system". I tried to use F8 to try to start it in safe mode and I can always access the BIOS. How do I get this service still? I don't have really any data here, I'm too preoccupied. Thanks for any help anyone can offer.

  Hi argyle_83,

  Were you able to boot into safe mode?

  This problem can occur if your computer's BIOS does not correctly manage or support the capacity of the hard disk on which you install Windows 7. You can try the steps below to resolve this issue.

  Method 1: Obtain the latest BIOS updates

  WARNING: This article contains steps that may involve changing your BIOS or parameters of semiconductor (CMOS) to complementary metal oxide, or that may require you to make physical changes to your computer hardware. Incorrect changes to the BIOS of your computer may cause serious problems. Microsoft cannot guarantee that problems resulting from changes to your BIOS can be solved.

  Your first step to solve the problem of the error loading operating system should be updated to your computer BIOS.

  Contact the computer manufacturer to find out how to obtain and install the latest available for the computer BIOS update.

  Find information of BIOS on your Netbook from this link.
   
  http://support.ASUS.com/download/download.aspx

  Here are answers to some common questions on the basis of input/output system (BIOS).

  BIOS: Frequently asked questions

  Method 2: Run the Startup Repair

   

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting.

  Refer to this article for more details.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error loading C:\Windows\System32\spool\DRIVERS\W32486\3\LXCJtime.dll' after the Windows Vista boot

  Original title: 32 error loading system

  The following means when I start my computer and how to solve this problem:

  Error loading

  C:\Windows\System32\spool\DRIVERS\W32486\3\LXCJtime.dll

  Hello

  This probably means that you need to reinstall or update your drivers for Lexmark printers. Download a new game for your model ofhttp://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Error loading C:\Users\User Name\AppData\Local\HpWebNotifier\SyncNetOffice.dll

  Whenever I start my computer, I get a pop-up that says: "error loading C:\Users\User Name\AppData\Local\HpWebNotifier\SyncNetOffice.dll.

  My computer and the printer work fine, but this message is boring.  I can't understand what the problem is.  I wonder if it is a question of an old printer that I used to be connected that I already uninstalled.  Does anyone have ideas how I can fix this problem?

  Thank you!

  Hello lisabar90,

  What operating system is your computer?

  What model computer do you use?

  Try this click Start, then hit and run and type msconfig.

  (if your computer does not have a run type msconfig in the search box and click on the application)

  Go to the Startup tab and see if you can see a reference to this place. Uncheck the box and restart your computer.

  After return your results.

• error message "Error in Script" line 30, tank: 3, error: error loading DLL, Code: 0, URL: file.

  whenever I boot, I get the following line to the 'Script error' 30, tank: 3, error: error loading DLL, Code: 0, URL: file...

  Question - what should I do to solve this problem.

  Secondly - I installed a new program that came with a new camera.  I have loaded the software but when I try to open it states the following:
  "The program cannot start because MSVCP71.dll absent from your computer."  Try reinstalling the program to fix the problem.

  I reloaded the program several times and this message continues to invent whenever I try to run the software.

  I believe that these two issues are related.

  I would appreciate help.

  Thank you

  Charlie

  Hi Charlie,

  one) you get error script on Internet explorer?

  (b) what is the brand and model of the camera?

  (c) what is the name of the camera program?

  (d) were there any changes on the computer before the show?

  Follow these methods and check if that helps:

  Method 1: You can get the script error if there is a problem with the JavaScript or VBScript code on the Web site you are looking at. Sometimes a script error can be caused by an error during the download of a Web page, but more often it is an error in the Web page itself.

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260/en-us

  Also refer to this article: http://windows.microsoft.com/en-in/windows7/what-should-you-do-about-internet-explorer-script-errors

  Method 2: Msvcp71.dll is a Microsoft C, C ++ Runtime library, and it is necessary for the performance of several Microsoft and non-Microsoft applications on a Windows System. It is quite possible that there is something wrong with the installation of the camera program files.

  Step 1: The MSVCR71.dll Version comes from Microsoft Visual C++ .NET 2003 with Microsoft .NET Framework 1.1.

  http://support.Microsoft.com/kb/326922

  Try download and install the latest Microsoft Visual C++ 2010 redistributable package of this link and check.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

  Step 2: If the error disappear not even once you have reinstalled the application causing the error, then download the DLL from the Internet or copy it from another computer with the same configuration as yours in the directory of the program, which requires that the file.

  Note: you can also copy the file to the C:\Windows\System32\

  After you have copied the file try to open the device program and check.

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• Error loading operating system when you import in ESXi

  Hello
  I have a Windows XP on ESXi Virtual Machine box 1. I'm trying to export and import the given in ESXi box 2. ESXi 1 box is in a V-Center configuration and ESXi box is a stand-alone server.
  I exported the virtual machine selected by the engine off the power of the virtual machine > file > export > export the OVF template.
  I then imported in box 2 by file > model to deploy OVF.
  Once the import is complete I get "error loading operating system"
  The machine virtual is Windows XP and run the ESXi 4.0 hosts
  ESXi 1 box is HP ProLiant DL370 G6
  ESXi Box 2 is Dell Poweredge 2950
  Anyone has any ideas please?
  Thank you

  The only other thing would be to try again exposrting to the OVF may export has become corrupted.

• Error loading of data in Project.jpr

  Hello
  
  When loading a folder (business component) in Jdeveloper. I get the following error.
  
  
  Error loading.
  
  Project: D:\RUP6\jdevhome\jdev\myprojects\OAProject1.jpr
  
  Name no. It is a reserved word or an object of the same name already exists. Server.
  
  Exception: oracle.jbo.dt.objects.JboException
  
  Exception stack trace:
  
  oracle.jbo.dt.objects.JboException: illegal name. It is a reserved word or an object of the same name already exists. Server
  at oracle.jbo.dt.objects.JboException.throwException(JboException.java:81)
  at oracle.jbo.dt.objects.JboPackage.addChild(JboPackage.java:173)
  at oracle.jbo.dt.objects.JboApplication.addChild(JboApplication.java:715)
  at oracle.jbo.dt.jdevx.JdvApplication.createPackageFromURLInfo(JdvApplication.java:2338)
  at oracle.jbo.dt.jdevx.JdvApplication.checkForDynamicPackage(JdvApplication.java:2315)
  at oracle.jbo.dt.objects.JboApplication.findObjectByName(JboApplication.java:954)
  at oracle.jbo.dt.objects.JboApplication.findObjectByName(JboApplication.java:925)
  at oracle.jbo.dt.objects.JboFileUtil.resolveAttributeNamesXML(JboFileUtil.java:253)
  at oracle.jbo.dt.objects.JboKey.loadResolveReferencesXML(JboKey.java:818)
  at oracle.jbo.dt.objects.JboBaseObject.loadResolveReferencesChildren(JboBaseObject.java:1835)
  at oracle.jbo.dt.objects.JboEntity.loadResolveReferencesXML(JboEntity.java:5796)
  at oracle.jbo.dt.objects.JboPackage.loadResolveReferencesXML(JboPackage.java:1360)
  at oracle.jbo.dt.objects.JboPackage.finishObjectsLoad(JboPackage.java:1042)
  at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:972)
  at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:951)
  at oracle.jbo.dt.objects.JboBaseObject.loadFromXMLFile(JboBaseObject.java:2615)
  at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:880)
  at oracle.jbo.dt.objects.JboPackage.checkForLoad(JboPackage.java:451)
  at oracle.jbo.dt.jdevx.ui.appnav.APNavigatorFilter.updateDir(APNavigatorFilter.java:226)
  at oracle.ide.model.ContentLevel.applyContentLevelFilters(ContentLevel.java:809)
  at oracle.ide.model.ContentLevel.addFlatDirs(ContentLevel.java:660)
  at oracle.ide.model.ContentLevelFolder.getChildrenList(ContentLevelFolder.java:72)
  at oracle.ide.model.ContentElement.getChildren(ContentElement.java:100)
  at oracle.ideimpl.explorer.ExplorerNode.getChildNodes(ExplorerNode.java:325)
  at oracle.ideimpl.explorer.BaseTreeExplorer.addChildren(BaseTreeExplorer.java:362)
  at oracle.ideimpl.explorer.BaseTreeExplorer.open(BaseTreeExplorer.java:872)
  to oracle.ideimpl.explorer.BaseTreeExplorer$ 2.run(BaseTreeExplorer.java:1788)
  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
  at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
  at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
  at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
  
  
  Please help me with this and give me a process step by step so that I can understand and solve it.
  
  Thanks in advance.
  
  Kind regards
  Prakash

  1. you create an object with the same name twice the team in this project. Double check.

  2 example: -.

  WARNING: Never use the name of Word reserved for him alone.

  In OA component XML files, 'Name' is a reserved word. If you have a column called "name", precede the object type to avoid compile errors. For example, in the Toolbox tutorial, we have a table (FWK_TBX_ADDRESSES) with a column named NAME. The corresponding attribute set to the name of the Document for this column is AddressName.

  Thank you
  -Anil
  http://oracleanil.blogspot.com/

• Satellite L300D: error loading operating system - Ubuntu Linux

  The easiest way, you could any body help me with "error loading operating system"!
  Completely screwed?

  have you checked whether your CD s severe correctly?
  What distribution you install?

• Error loading on my satellite 4080CDT

  Impossible to restart my 4080CDT satellite directly.
  The message is:

  Error loading! Press any key to restart

  I was finally able to restart with a floppy disk 1.44Mo on three files which are: bootfont.ini, ndetect.com, ntldr and boot.ini.

  Without this startup disk, the message load error.
  Can someone help me?
  Thank you.

  Hi manu1,.

  Here's a solution:
  -try to boot in the saving Mode option;
  -in the Mode of economy option delete content
  of the following cards: Temp, the browser Cache, history,.
  Web pages offline, temporary Internet files, recent;
  -move your temporary Autoexec.bat file somewhere else as another card;
  -use the disk cleanup tool.
  -Reboot your system;
  -Check your system with a Virusscanner update after you fix the problem.
  After is it possible to restart without rebootdisk?
  Let me know,
  Good luck

  Stef

• Cannot connect - error loading the database...

  Hello

  Since last night find it me impossible to log in on my Skype.

  He puts me "error loading the database. Skype." It is possible that another instance of Skype to use it.

  I have reinstalled Skype, restart my pc, close all programs that could use it.

  My husband get a leverage son skpe without pb so it comes well d a pb with my nickname... going to Word of the change back I. Despite all this, I still have the same message that appears! 1

  did anyone have the same pb? and how he made it?

  Please pour your help!

  Rrbonjour

  so I did well the manip: Task Manager, process shutdown Skype.

  then relaunch the application, but it gives me the same result...

  I made a new system more earlier but it's restore gives me the same result...

  I asked a third person open my account on another pc and ca works... so it just my pc, not a hacking, (already it reassures me!)

  My spouse does so well to open Skype with his nickname but I still nothing.

  Application rattachee a Skype name can she used Lun?

• Satellite L300-20W - "error loading operating system"

  When I turn on my laptop, the Toshiba screen charge then it will a blank black screen with a white underscore flashing in the upper left.

  A few seconds later this message appears in the upper left corner "error loading operating system" I watched v online on how to solve this problem, but all that happens is complicated jargon.
  Anyone know how I can remedy this in simple terms?
  See you soon

  Hello

  I can't say with certainty what may be the problem but maybe HDD (hard drive) is a troublemaker.

  Start your laptop and press F2 to enter the BIOS settings. Check if the HARD drive is recognized and registered properly on the page. Load the settings by default using F10, then restart your laptop.

  The same thing happens again?

• Re: Satellite A300 - error loading operating system

  Hi, I have a computer laptop satellite a300 and when I boot the system I get an error message "Error loading operating system" - if some kind posters can help me on this issue, it would be much appreciated.

  Thank you

  Don

  The BIOS recognize the drive? Check in the BIOS.

  You can start in safe mode?
  If you go into the advanced boot menu, select Repair my computer, and then select Toshiba Recovery option. This procedure reinstalls the operating system.

  This feature is only available with a preinstallation of Windows Vista. If you have Windows XP, you must use the CD.

• Error loading C;\users\Toshiba\appData\Local\SMBDP.dll

  Can someone help me?
  Once I start, I get a message that says: error loading C;\users\Toshiba\appData\Local\SMBDP.dll, then the module is not found.
  I tried everything but can't get rid of it,

  I asked for help online, but he told me to buy a tune-up utilities, but I already have untilities tune-up and have run through completely but it always does'nt work.

  Help, please.

  Hello

  TO be honest, this file is unknown to me. I searched using Google, but I couldn't find anything :(

  You can try a system restore to an earlier point or what have you done since you got this error message?