Error loading C:\Windows\System32\spool\DRIVERS\W32486\3\LXCJtime.dll' after the Windows Vista boot
Original title: 32 error loading system
The following means when I start my computer and how to solve this problem:
Error loading
C:\Windows\System32\spool\DRIVERS\W32486\3\LXCJtime.dll
Hello
This probably means that you need to reinstall or update your drivers for Lexmark printers. Download a new game for your model ofhttp://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Tags: Windows
Similar Questions
-
I have a Canon MX850 printer: when the document is passed, I get the following error and it repeats until I have load with paper and press OK. I'll have 30-40 on the screen before I can reload the printer with paper. I deleted the printer and reloaded it. I scanned everything and nother works.
---------------------------
RUNDLL
---------------------------
Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\cnmsm98.dllThe specified module could not be found.
---------------------------
Ok
---------------------------
billtriceHi billtrice,
I suggest that you contact Canon support for more information on the issue.
http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer
-
missing system32\spool\Drivers\W32x86\3\DLCX.dll file
I get the error message - error loading windows\system32\spool\Drivers\W32\3\DCLXtime.dll. I use Vista Business and ran the Microsoft safety scanner with no result.
Hello
1. what operating system do you use?
2. when exactly did you receive this message?
3. have you made changes on your computer?
Method 1:
I suggest you follow the link and check.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
I suggest to download and install the Microsoft safety scanner and run the scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate
I also suggest you to reload the printer drivers and check.
-
Since I removed my old Lexmark printer and replaced by a Kodak ESP C310 printer I get the following popup every time you start... Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXBTtime.dll the specific module could not be found.
Hello jackc37,
Have you tried to reinstall your Lexmark printer and then uninstall, to check if everything is deleted? When you started your system in a clean boot, you saw the error listed above?
How do I uninstall Lexmark printers
Please let us know status.
Thank you
James
-
Original title: starting Windows Error Message
Starting Windows I get the message: error in entry c:\windows\system32\spool\drivers\w32x86\3\DLCCtime.dll RUNDLLentry
Hello
Have you made changes on the computer before this problem?To narrow down on the issue, I suggest you to check the behavior by starting the computer in a clean boot state. You can read the article and check.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: after a repair, be sure to set the computer to start as usual as mentioned in the "steps to configure Windows to use a Normal startup state" section of the article above.Let us know if that helps. -
I get this message and have no idea what it is or what it touches.
"Error in entry: RunDLLEntry C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\DLCJtime.dll missing.
Can anyone offer a solution to get rid of him?
Hello
This message refers to Dell printer drivers. You can try simply remove and reinstall the printer drivers relevant to get rid of it.
If not, visit this link to the Dell website, it can be applied to your system too:
http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=JM&l=en&s=Gen&docid=DSN_28E393B4B4A5ADEEE040A68F5B2849AA&isLegacy=true -
Original title: Run DLL error?
Lately I get this message at the beginning upward.
Error in C:\windows\system32\spool\DRIVERS\x64\3\LXCGtime.dll
Missing entry:_RUNDLLEntry@16
What this means and how can I fix this :D
Thanks a bunch
Hi Christalligator,
Try these steps and check the result.
Step 1: If you have connected the printer, we recommend you to reinstall the printer driver and check the result.Step 2: Restore the computer to an earlier time
see How to restore Windows XP to a previous state .
b. check if the problem persists.Visit our Microsoft answers feedback Forum and let us know what you think.
-
I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: lack of entry: RunDLLEntry It just started and I have not installed anything new.
Hello Lscherr,
Thank you for your message. To clarify, you are able to print out your design program? You can try to perform a clean boot and printing of your design program. A clean boot will start your computer without any 3rd party applications, you can then start your design software and test the printing functionality. If you are able to print, the problem may be caused by another application of part 3. Click HERE for instructions to boot.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: says my c:\windows\system32\spool\drivers\w32x86\3\lxcftime dll is missing
I TRIED A NEW REGISTRY CLEANER THEN CANCELLED. AND THEN BEGAN TO GET MISSING FILES VIEW
Hi albertdibley,
- You have a Lexmark printer connected?
If so, the error seems to be related for the Lexmark printer drivers.
I suggest you to uninstall the printer and reinstall with the latest drivers from the manufacturer's Web site.
Enter the number of the printer model in the following site to find drivers. Download and install the same.
-
What is DLCDtime.dll for? Can it make my computer slow? When I turn on my computer, this message appears
"Error in C:\Windows\system32\spool\DRIVERS\W32X86\3\DLCDtime.dll".
"Missing entry: RunDLLEntry.Is this bad?
Thanks in advance
Hello
1 how long you have been facing this problem?
2. don't you make changes on the computer before the show?I suggest you to try to solve this problem with boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article. -
getting ERROR IN c:windows\system32\spool\drivers\w32x86\3\LXCFtime .dll on startup. have a Lexmark 730 printer that is NOT always connected to the USB port. I read some of the post, but I don't understand what they mean. Not a novice, but also not a real Tech person. English simple need help please. Thank you
Also, the laptop is a HP Presario w / AMD 64Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
I suggest you try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
It will be useful.
-
I get following errors: Module C:window\system32\spool\drivers\w32x86\3\lxdodatr.dll and dmrclibrary.cpp Microsoft visual C++ runtime Windows 7
Please stand out as the answer. What is the number and the model of your printer (Lexmark)? You can try to uninstall and reinstall the printer driver.
-
I don't know how to resolve this error message. Can someone help me? ErrorinC:\windows\system32\spool\drivers\x64\3\lxcdtime.dll missing entry_Rundllentry@16
Re-install your Lexmark printer driver
-
When starting and just after the office, I get a message:
Error loading
c:\\windows\system32\spool\DRIVERS\w32x86\3\DLBTtime.dll
is not a valid Win32 application.
This can be cancelled, and if not, the computer seems to operate normally. How can I avoid that this message is displayed?
I use Vista on a Dell XPS M1330
Read the information above Vincenzo Di Russo MVP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the error persists, you can use the program below to out start, if you have already uninstalled the Dell software:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.
See you soon.
Mick Murphy - Microsoft partner
-
Dell Dimension E510 system was crushed by a virus. The files were dumped, authorized reader and a reload fee system has been done. When all files have been charged and the system is recovered, the following errors began to appear at startup:
-IDT Audio system tray app has encountered a problem - sttray.exe and
-Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll Missing entry: RUNDLLEntry
I'd rather be able to clear these by using the operating system disk I hope it do not screw the system. Any ideas would be nice.
Thank you
Dennis Holmquist
Hi Dennis,
DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer, then re - install printer drivers / should solve the problem.
Reinstall the printer. In addition, install the latest drivers from the manufacturer's Web site.
To connect a printer directly to your computer
See also:
Microsoft Windows XP - add a printer attached to your computer
For IDT audio error, you can install the latest audio drivers from the Dell support Web site to see if it helps.
Maybe you are looking for
-
Bluetooth mouse does not work on my Satellite A300-1ND
HelloI am pleased for the installation of double sys XP operating after Oem Vista over two days.anyway thanks for the help here.After you have installed all the drivers, BlueTooth mouse is not recognized by the internal bluetooth.I tried to install a
-
I have a problem with the press service on my R6250. Despite the service being turned off on the user interface of genius, it still appears on the control application, I use to run my streamer (Naim). Is it possible to prevent from appearing and actu
-
License with Measurement Studio and Visual Basic 2008 Express problem
Hello! I have a license for the professional edition of studio measure 8.5 and I use the express edition of Visual Basic 2008. I am trying to use the FFTfunction, but get the exception {"NationalInstruments.Restricted.AnalysisLicenser is unauthorized
-
Jobs stuck in the queue on hp psc 1215.
After crossing solutions 1 to 10 in "impossible to print. Jobs stuck in the queue", I have now lost my printer. Tried shutting down, unplug all the cables for laptop & printer & re connected every 12 hours later. But no sign of the laptop to find th
-
Can I change/update anything in my pc?
Laptop HP Pavilion g6 - 2255ev with Windows 7 ProfessionalHi guys... I bought this pc on a year and a half... and I had some serious problems with it... overheating is a problem I've had from the beginning... but the technicals of the store I bought