T620 WES8 Image Capture failure/Boot Loop

Similar Questions

• Image capture does not load the thumbnails of all the photos detected

  MacBook Pro (retina, 15 inches, end of 2013), 2.6 GHz Intel Core i7, 16 GB 1600 MHz DDR3,

  iPhone 6 s, iOS 9.0.2

  OSX using 10.11.5, running the Image Capture

  Connecting iPhone and started the image capture.

  Capturing images don't load picture thumbnails.

  Left the application here to give time for it to load, but still the same

  Exit and restart Capture of Image, some of the miniatures that failed to load previously managed to load, but a lot are all still not loaded.

  Exit and relaunch Image Capture, some of vignettes that has not charged the 1st time and instructed the 2nd time, failed to load now. seems to be back to square 1.

  Its a hit and Miss sort of thing.

  This has been hard for some time already, can't remember how far behind you.

  Any advice would be greatly appreciated.

  Thank you.

  Hey there, at0m87!

  Thank you for using communities Support from Apple. I understand from the information you provided, when you connect your iPhone and open picture Capture, there are missing thumbnails. I manage my own photos on my Mac, so I can understand wanting and needing these thumbnails to display correctly. I have a few things you can try to help him.

  1. Eject your iPhone from the computer and stop Capture of Image. Press in and hold the SHIFT key on your keyboard while reopening of Capture of Image again. Connect your iPhone and the test of the miniatures.
  2. Restart your Mac. Stop the Image Capture, eject your iPhone from the computer, and then click the menu  Apple in the upper left corner of your screen. In the menu, choose "restart". When you start the computer, open picture Capture and connect your iPhone. Test the thumbnails.
  3. Look for updates on Mac and your iPhone.

     The following article will help to check and install updates for your Mac.

     Update the software on your Mac

     The following article will help you to check and install updates for your iPhone.

     Update the software on your iPhone, iPad or iPod touch iOS

  4. Check Image Capture thumbnails in safe mode. Eject your iPhone from the computer, and then follow the steps outlined in the article below the link to start in safe mode

     Try safe mode if your Mac does not end commissioning

     Even if the title of the article is not specific to your question, safe mode is always a good step to take. It performs several checks of your system during the boot process, and disables some software that could cause a conflict.

  5. Try the Image Capture in a new user account. The article in the link below will give you instructions on the implementation of a new account, as well as some information as to why this may be useful.

     How to test a question in another account on your Mac.

  Have a great day!

• IX2 - DL does not start after the firmware update and now in boot loop contant with double red lights

  I just applied the update to the latest firmware 4.1.208.33789 for my IX2 - DL and it took an extremely long time to reboot - flashing white light for 20 min on the right.

  Shooting and by unplugging power did the same result.

  I hold the reset button hardware pin and now he's in a boot loop throw up double red lights and then attempt to restart with flashing blue white and strong.

  Help! don't know what to do next.

  Hello steveappcity,

  I recommend a support incident, opening the only way I can support an imager is if she is officially released:
  https://Lenovo-na-en.custhelp.com/app/ask/

• Iconia A1-810 taken in Boot Loop in any case to get it out?

  OK I admit it in a previous post, I was looking at getting the root privledges on my A1-810, I asked how to go in the Devolopers Options.

  Although I had put up to open the Options Devolopers and activation of Usb Debugging Options as well.

  But before I had the chance to do another thing my wife needed me to do something for her, so I stop my Tablet thinking I would come in a little bit and pick up where I left off.

  Evil

  When I started the shelf upward, he went through the usual boot process, but when he got to his home screen, stop immediately, started again and stop again.

  I went through this during about half an hour until I found a post on the forums that said.

  DO a Hard ReSet and will arrange the problem cause something got the Boot Mbr obstructed upward, and while I would lose everything on the shelf she set it to plug the factory and repair Boot Mbr.

  Well I preformed Hard ReSet.

  But it does not solve the boot loop in what it is.

  While he did reset it on specifications of the factory, I could tell that he began to return to the Welcome screen that guides you through the Setup program for the first time.

  You guessed it, he got to the home screen about 3 seconds later it restarted, and restarted.

  It went like that for well over an hour until I stopped him, with that alone be able to do using the reset button.

  A few times as it has been rebooted it came Android OS is upgraded software.

  Short saying I'm "VERY MAD".

  I can't quite understand what has happened.

  I never did anything, but go in the Devolopers Options.

  Short of sending new in Acer to be looked at.

  ANY IDEAS?    Anyway thanks for all the ideas in advance: Ricky

  If the unit is still under warranty, I suggest strongly back the seller as soon as possible, and it will become a problem Acer. You did nothing wrong, there is a software failure, and we all know that Android 4.1 and 4.2 are more than obsolete, so there is probably nothing you can do.

  I'm also stuck with serious problems in my Iconia B1 with 4.1.2 Android and there not there an even a chance that Acer will provide updates anytime soon, at least not in this life.

• boot loop / startup of Windows xp sp 3.

  24 hours earlier, works very well. reformatted a month ago, installed all my legitimate software and re-recorded all.

  now, in a boot loop and can't get anywhere. safe mode does not work, no circuit mode. It gives an error when I disable the restart in case of error.

  not mountable boot volume.

  I think that if I can get into the back, with chkdsk I can probably solve the problem... but not in this way. any suggestions?

  Sony vaio vgc-rb43

  Windows xp sp3 home edition

  1 GB of ram/pentium 4 (unknown at this time the ghz etc.)

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• iPhone 5 s 10.0.2 update cannot use image capture

  I have a mac pro running 10.6.8. Since I upgraded my iphone 5s today 10.0.2, I am unable to use Image Capture on my mac to transfer your photos, iphoto does not work either. I get a message on my phone to the computer I chose to 'trust', then I get an error message in the Image Capture in saying that I have to enter a password on my phone but the password is not displayed at the time.

  Hello pwexford,

  Thank you for using communities of Apple Support. It is my understanding that you were unable to use transfer pictures from your iPhone to the Image Capture. It is very important to save valuable images of your phone. I want to make sure that you are able to transfer this content correctly.

  His expected behavior to be prompted for a password if the phone is locked. Please, try the following steps.

  1. Connect your device to your computer, and then turn on the unit.

     If the device is locked with a password, enter it.

  2. In the Image Capture, select the device from the list of devices.
  3. Use the buttons at the bottom of the window to Capture of Image to display thumbnails in a list or as icons to change the size of thumbnails, or to rotate or remove images.
  4. In the pop-up menu to import to, choose where to save images or what application to use to open the image.
  5. To import only some of the photos, select the photos you want, and then click Import. To import all the photos, click Import all.

     Choose AutoImporter menu drop-down ' connection opens this [device] ' to transfer images from a device to your computer whenever you connect it to your computer.

  6. Select "Delete after import" to remove parts of the instrument after transfer to your computer. You can also select individual items on your device, and then press Delete on your keyboard.

  Image capture: Image transfer and other elements of your device

  Have a wonderful day!

• PDF Image Capture files

  Since the update to Sierra (although I can't say that this was the cause of the problem), I have a problem when parsing and saving documents in PDF format using the image transfer application. A PDF file is created but when I open the pages are naked with perhaps only sometimes visible top line (and which appears at the bottom of the page!). This problem occurs only when I choose the PDF format; If I choose to save as an image file (PNG, for example), it works fine.

  My printer driver is up to date and if I use software of third parties (e.g., HP Scan) this problem is specific to the application of Capture of Image so I can create PDF files successfully.

  This problem occurs on my iMac Mini and Mac Book Pro which have been updated for the last OS of Sierra

  You see the problem even if you scan to PDF using Preview?

  I use an excerpt instead of the Image Capture to do this and he continues to work very well in the Sierra AFAICT. I'll try with the Image Capture when I get the chance, just to compare. He used to work as well, but I've not scanned with it in quite awhile.

• image capture does not work with the epson scanner after macOS sierra upgraded

  Image capture no longer works with epson scanner v800 after upgrade. I installed the new drivers from epson, and it still does not work. Just says: "waiting for scanner", but nothing ever happens.

  Drivers Epson macOS 10.12.x specific https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=256062 & infoType = Do wnloads & platform = OSF_M_X12 do not work?

• Image Capture App combining OS Sierra files

  Hi I have a problem with the application of Capture of Image integrated into the Apple OS since the update to the Sierra. Before the update I scan documents into the feeder of my MFP as a PDF file and select 'combine them into single document option. of course, I get a PDF file with the scans in. I would then analyze an other internal documents and again, I would get another PDF document with them in.

  Since the update OS Sierra and using the same settings as the first PDF file is created in the end, however when I go to scan the next set of documents Yes it creates another PDF file with these files in but she also adds the previous set of scanned files to the same doc. This continues for each subsequent set of scanned files. The only way I managed to prevent this must either exit the Capture Image soft after each set of scanned documents or in the test results window, select the magnifying glass next to the analysis the folder Apps of Capture Image temporary Doc and send these files to the trash. It's as if the app is no longer clearing Temp files between scans automatically.

  Details: OSX El Capitan of OS Sierra. MFP to use Lexmark XC2132 Via USB 2.0 connection. Image Capture worm 6.8

  Hi Simon.B82!

  I see you have a problem with the scanning of documents in the application of Capture of Image.  I know it's important to have your applications work correctly, and I'm happy to help you.  To further isolate the issue, please create a new administrator account on the Mac.  A test to see if the problem of scanning is always present in the new user account.  Here are the instructions:

  How to test a question in another account on your Mac.

  Thank you for using communities of Apple Support.

  See you soon!

• Boot Loop iPhone 5 c problem

  So that's how iphone got a uppdate iTunes, but after she got into a boot loop.

  The phone can be switched on using the on/off switch, but it can be disabled by using only the power on + combo home buton!

  Powers on but right phone at the apple logo, it stay there for 3 seconds then the apple logo fades to grey (like an LCD) broken then there restarts... and that on and so on... until the battery is empty.

  The phone goes into DFU mode, itunes acknowledged, but after itunes launch the iphone in dfu mode, itunes says "waiting for iphone", the phone restarts, but instead to continue the restore procedure, it penetrates into the same loop and after 10 minutes, itunes gives error.

  The phone is out of warranty, and I want to record just because it seems perfect, no sign of use!

  Oh and another thing, I tried to put another apple original battery (I hade a new brand in hand 6!) did not work...

  So guys I came to you for your review. Be free to say what you think that will fix this poor iphone!

  I was about to say to make an appointment at the genius bar. They would try to restore it for you free of charge...

  Then I saw your mention of trying to put a new battery in there... If you have physically opened the phone upwards, it is technically unbearable and completely untouchable by Apple. I couldn't hurt to consider anyway and see if they can get it to restore, but you can kiss all hopes for a farewell to replace security exit.

• image capture does not recognize my iPhone when I connect to my mac?

  I have the iPhone, when I connect it to my photos of mac does not open... How can I put on it to open it

  Hello rosrich,

  If I understand your message that you are eager to the Mac to open Image Capture when you connect your iPhone so that you can import the photos. I would like to have the possibility of having an auto app launch when I connect my iPhone as well. I'll be happy to help you with this.

  If you go ahead and open Capture of Image and then connect the iPhone, in the lower left corner, you will see the name of your iPhone and the "connection this iPhone opens:" you have the option to choose what app that you like. So if you want Image Capture to open when you connect your iPhone, you would select which. If you want pictures to open, you would select Photos instead. Information on the AutoImporter lies in the following article:

  Image capture: transfer images and other elements of your device

  Thank you for using communities Support from Apple. Nice day!

• iMac 27 stuck boot loop

  my 27-in. Imac is stuck in a boot loop.  It goes to the start screen, I see the Apple logo and progress bar, then the screen has a line go overboard and it restarts. Attached picture to show you the screen, any help would be great. Thank you!

  Try to start in safe mode, try safe mode if your Mac does not commissioning - Apple Support

• Import Photos with Image Capture

  Hi people, I do not know if I am posting this in the right forum. If this isn't the case, feel free to have moved him.

  I did some research trying to help this user and also to learn.

  Import all pictures (including photos from iTunes backup) iPhone to mac

  I have a Mac and a PC but I use the PC for my main photo library. When I import pictures from my iPhone to the PC using the Import Wizard, Windows 10 maintains a cache to remember photos that have been previously imported so that they don't re - import. I can post the path to the cache but it is useless, the cache is a file system, called "PreviouslyAcquired.db".  If I remove photos from my PC which have been imported and you want then re - import, I have to reset this cache (delete) so that the photos to import again. Otherwise the photos already imported are ignored and only new ones appear on the Import Wizard.

  The reason for this post is that I wonder if OS X (Photos or Image Capture) retains the same type of cache. I also wonder if this is the reason why the OP on the wire above cannot re - import the photos that have been restored from their old iPhone.

  So my questions are:

  (1) with OS X Image Capture, can a photo to reimport previously imported?

  (2) no OS X maintains a similar to Windows cache and if so where is it and how it is reset? I looked on my MBP 10.11.5 but nothing helped. It is obviously not the iPod Photo Cache - that one is associated with iTunes synchronizes only. I also started the Image Capture, but cannot see any parameter for this purpose.

  (3) I.C. will give me the opportunity to re - import if it imported the same before pictures? I could make an experience, but the bright minds here probably know the answers.

  Any info appreciated...

  I have found no Apple documentation on it, but when I use the Image Capture to import from a camera or card in a folder in the Finder, I can import the same items over and over again. There is no control for imports carried out previously.

  Only when I import using a photo app that maintenance photo library (Photos, iPhoto, Aperture) pictures will be checked for duplicates when importing.  But even with Photos, iPhoto, Aperture can I restore deleted photos by import since the device again, if I removed them from the library.

• I use Image Capture to shoot pics my phone is off

  Tired of importers jpg directly to photographs, then having to export and re-name-the, I use Image Capture to extract my iPhone.  I save it to my desktop.   I got their name in the Finder.  Then, I open the pictures and import them from my office.  When I finished all imports, I delete the pictures on my desk.  I have been through the jpgs in Photos and see several that I KNOW that I have given a file name, but they have names like IMG_5677.  What a waste of time!   I HATE it that Apple makes it so difficult just give a file name to your photos!  I use filenames for reasons of family history.  I don't want to be enslaved to a convention of software as "Securities.".

  Any suggestions?

  Thanks in advance for your answers!

  You must make the difference between the file and the data it contains. This Word file is not your novel, it is a container. The data it contains is your novel. The Beatles never wrote or recorded an mp3 file. He wrote and recording Let It Be , and this mp3 file contains a copy of this record. That jpeg is not your Photo. It is actually a compression format that contains a version of your photo.

  - And is not Apple, but a convention shared by all the camera manufacturers, software manufacturers and so on - there is a difference between the name of the file that refers to the file and the title of the photo which is a name that you give the image. Thus, IMG_5677 is a file name, our marriage is a title for a photo.

  The title of the photo is saved in Exif and IPTC Photo metadata and that is accessible by all software photo on all computer systems. Add a title in pictures, export the image, send it to a Windows machine, open it in, say, Lightroom, and there is the title.

  There is an agreed standard all of the manufacturers of cameras and software manufacturers.

  Compatible with this standard photos.

  You want to use filenames for titles which is not standard, and if you find yourself with this complexity.

  Here is another way to work. Import the images in the Photos. Add a title to them in Photos. So, if you want a free version at some point that has the title as file name, export the image (file-> export) and, in the export dialog, he say to use the title as the file name.

  Less complex and standards.

• in el capitan 'Image Capture' will not open a "Disk Image" file of Adobe

  I'm trying to update to the latest version of Adobe Flash Player.  My iMac (El Capitan, latest version) told me that 'image Capture' cannot open a file in 'picture disc '.  I'm stuck.

  Where did you download this disk Image from? Only direct downloads on the Adobe site can trust: https://get.adobe.com/flashplayer/