Model of PE 2970 not showing

Similar Questions

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• Dynamic links does not show a 3D model

  Hello. I use Dynamic Link a log time ago, but now I have some problems.

  I work in a project in first CS5 when I send to After Effects, I convert this composition in a 3D layer and adjust some parameters of transformation. If I change the scale and Position works very well and it immediately shows the first.
  But when I change Orientation or Rotation, it doesn't do anything in After Effects either.

  
  I thought it was a problem in preview only, so I made the model of EI and first and he was wrong.

  I have attached a picture of what I'm doing. You can see the "Orientation" settings in 328 °, but it does not show the screen.

  What can I do? What I am doing wrong?

  Thanks for your help.

  It seems that you have a collapse of the lit transformations and the layer of film is a composition. I guess the Maria Isabel.avi in the composition of Maria Isabel.avi is 2D. With collapse transformations turned on what you see is a normal behavior.

  What you want to do is just right click on the AVI of Maria in the chronology of the first and select replace with After Effects Composition. Once inside AE not pre compose layer avi, just make it 3D.

  The other option would be to open the composition of Maria Isabel.avi and make your 3D transformations there.

  Still another option would be to disable the transformations of the collapse.

  I don't know why the images of Maria Isabel.avi was previously comped. I see no cases in the screenshot that gives me a reason.

• Airtel 4 G (Huawei Mobile Wifi) Hotspot is not showing network on EL captain

  Hello

  I just bought an Airtel 4 G model Hotspot(Huawei Mobile Wifi) E 5573. There are 2 ways to connect this model to my macbook pro which is running on EL CAPTAIN 10.11.2

  1. I can connect this modem wifi with the supplied USB cable. In this case the internet arrives on mac and it works well

  2. Another way is to use this modem as a WIFI router. Now for some reason any my laptop does not show this network in the wifi networks list. The network showed on all my other devices such as Iphone, Android, iPhone and Windows pc but not on mac. Surprisingly, it shows on my friends mac but not on mine.

  Can help understand what can be done so that I can see this network appears in the list of networks.

  Thank you

  Pawan

  Change channel 6 auto. He began working

• Airport not showing is not as network device?

  My Airport Extreme 802.11ac does not appear in the finder as a network device. It showed in the previous Extreme model I was using, then leave for any reason any. After messing around for a month or two, then trying to get it working again, I bought the new 802.11ac AE, but it does the same thing.

  I have two other devices that appear in the finder under the shared part of the side bar of the Finder window, but cannot figure out how to show by EI. The wireless feature works very well, as a printer BSE connected to the USB port of the AE. Internet

  It would be different if I was using the IP address of the type 10.x.x.x instead being in bridge mode and using 192.168.1.X?

  Any suggestion is appreciated.

  My Airport Extreme 802.11ac does not appear in the finder as a network device

  In the finder it will show only upward if you have a connected USB drive.

  It showed in the previous extreme model that I used

  Only if you have the network resources available to him.

  Computers will be displayed, because they offer resources network, the PF to be exact.

  But the airport will not be displayed. Mine is not, and never has.

  My Time Capsule arises because it is a hard drive offering services of files on the network.

  Printers will not appear in the finder no longer...  Again, I have printers online... they do not show in finder and never have any version of Mac OS X, I used.

  However a printer with USB or SD card slots and a wired card which offers services of files on the network may appear... In the only finder services files will be displayed.

  EI has to offer network file services appears in the Finder... Plug a USB stick into the USB port and set it to share on the network and the AE will then appear in the finder.

  The place that you are looking for your AE's utilitarian Airport... It's the Apple of method available to see you the configuration of EI... no viewfinder.

• How can I get the TestStand splash screen to not show up when I call the results treatment Utility offline?

  So I call the Offline processing Utility (ORPU) a not executable call results in a plugin to perform a personalised treatment in another configuration.  Everything works fine, including having run reduced (mostly hidden) by using the option/tray.  When he called, the TestStand splash screen appears (certainly is not a show-stopper but it's confusing from the point of view of the user).

  Is it possible that I can get this start screen to not appear when calling the ORPU?  I noticed in the help, mention is made of the use of the callback file, and I wonder if someone has successfully used this to avoid the dialog box or other behaviors.  I would like more info on how it works, but it doesn't seem to be a vast detail on this in the help, and I'm not also find me useful examples.

  The source of the Offline utility treatment results is included with TestStand and can be changed.

  The ORPU source is located under "Components\Models\TestStandModels\Offline utility treatment results"

  From the source, you can see that there is no flag that allows you to hide the splash screen (except for / I leave, but that it will also close the ORPU!); However, you can easily change the ORPU so it does not show the start screen by removing the following lines in \Components\Models\TestStandModels\Offline Results Processing Utility\OfflineResultsProcessingUtility\MainForm.cs

  If (! data.) Quit smoking)
  splashScreenForm = new SplashScreen (mEngine, false);

  Regarding the flags without papers, there are not really many flags undocumented in the ORPU (even once, you can see them in the source), and undocumented flags have very specific use cases (open files from shell and NEITHER internal regression tests).

  A (non-official) complete list of indicators ORPU from 2014 TS:

  /?
  Shows help

  / tray
  Starts the ORPU in the status bar

  / exit-when-done
  Exits when all files are made

  / I'm leaving
  Leave immediately

  /process - files - Missing - Data
  Treats the files even if they lack of data

  / which-process-files-Missing-Data
  Do not process files that are missing data, show only a mistake (it is the default behavior).

  / Process-All-Profiles
  Start all profiles

  / Process-No.-Profiles
  Don't start any profile

  / Process-Profiles
  Treat the profiles specified in the following arguments

  / process-files
  Add the files specified for the specified profile

  / log - level

  Sets the logging level for the newspaper ORPU, all of the messages above, the specified log level is saved.

  /ShellOpen
  It is an internal indicator, it is used to treat applications for the shell (for example, after a double click on a tsr in Windows Explorer). Do not use this indicator.

  / non-interactive
  It is an internal indicator used for the test. Do not use this indicator.

  Please note that NEITHER does not support appellant flags undocumented and that NEITHER is not guaranteeing backward compatibility of these flags undocumented and they could change at any time, without warning.

  For a more detailed explanation of the working of each option, refer to the Arguments of the command line Utility using TestStand treatment results offline.

  Hope this helps,

  Francisco

• in my printer, I fill ink but when check here see the ink did not show anything

  so last week my printer working correctly and there see the ink low level. so, I refill the ink. so, when I saw the ink level, it did not show anything. the ink was no more.

  Hi Raghini,

  What is the brand and model of the printer?

  If you facing problems with the ink level, you could get in touch with the manufacturer of the printer to get the replaced cartridge or for further assistance on this issue.

  For more information, see the article:

  Check on a printer ink levels

• My laptop does not shows correct date and time... and when scrolling a page it scrolls very slow

  Hello

  I'm having a problem with my laptop. It does not shows date and the correct time. I put it to update manually, and every time I restart or turn off my laptop and reopen it shows as in the year 2007. Please help me... And when I scroll a page, it will slow real lines showing a... As half page goes up. My touchpad is not working properly it's button are good work. I've updated with synaptic driver, but it displays error as there are two or more materials

  Hello

  -What is the limited issue with scrolling of Web pages or all Microsoft-related applications (Excel, Word, One notes, etc...)?
  -What version of Internet Explorer is installed on your computer?
  -You are aware of any changes made on the computer before this problem?
   
  Step 1: For the synchronization of the clock of your computer problem, I suggest to return the article mentioned below and check if the problem persists.
  Synchronizing your computer clock
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_date_it_overview.mspx?mfr=true

  Loss of the time in a computer settings might also be due to some problems in the system (Input Output) BIOS of a computer database. You can also check with your computer manufacturer to see if there is no updated BIOS for your computer model.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   
  Step 2: For the problem with scrolling of Web pages, I suggest to see the link below and check if the problem persists.
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091
   
  Step 3: Run the Microsoft FIXIT from the link below and check if the problem persists.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

   

  Hope this information helps.

• My laptop does not show my webcam under imaging devices or anywhere

  Original title: my laptop does not show my webcam under imaging devices or anywhere.  I was download the softeware and drivers and I don't know what happened to the webcam

  My daughter deleted files and scanned the computer and now I don't have a webcam and the microphone does not work.  No idea what can happen?

  Hello
   
  What is the number and the model of the computer? Was the web works well before cam?
  
  Method 1
  Run the fix it
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  Launch the Device Manager and try to find the physical changes and check if the web cam shows.

   
  1. click on Start, in the search bar type Device Manager , and then press ENTER.
  2. in the Device Manager window, click the top of the page on search for the hardware changes.
  3. check if the issue is decided.
   
  You can also update the driver of your webcam using the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Regarding the problem with the microphone.
  1. have you tried to plug the microphone into the other USB port?
  2 is that the problem is specific to the microphone? You are able to use the speakers?
  Set the default Microphone.
  Perform the task with the help of the steps to adjust the Microphone as default.
   
  (a) go to Start and click on Control Panel.
  (b) click Sound, and then a new window will open.
  (c) in the new window click on the "recording" tab and right-click in the window and click Show disabled devices.
  (d) now check if the Microphone is listed there and right-click on it and choose activate.
  (e) point out that Microphone and click "set as default".
   
  You can also check the thread below that had several possible steps to solve the issues related to the microphone:
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/e7b5fabf-fe6a-4ED4-99b1-48d01dd99762
  Response with more information to help you.

• Photosmart Premium C309g-m on: scan opion not showing Photosmart Premium C309g-m on mac OSx 10.10.3

  Hello. The scan option does not show the printer.  I reinstalled the printer as well as all updates. I have already scanned and this feature is currently unavailable.  I wonder how to solve this problem.  I am

  using Mac OSX 0.10.3

  Thank you

  Hello

  Restart your Mac, then try to run the software update as follows:

  First of all make sure that the printer is turned on and connected to your Mac or on the same network.

  Click on the Apple icon, then select about this Mac.
  Click software update, and then click the Store from the top of the indicated window menu and click on reload the Page.

  Be sure to install any update HP or Apple, then check for the difference.

  If it persists, try manually install the package below:
  http://support.Apple.com/kb/dl907

  Now you should be able to scan from printer & Scanners or Image Captrue as follows:

  http://www.support.HP.com/us-en/product/HP-Photosmart-premium-all-in-one-printer-series---C3/3984414/model/3793675/document/c04467713/

  You can also install and use the HP easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Please let me know how it goes,

  Shlomi

• USB is not showing in my computer

  I have a usb key which is installed successfully pilots but is not showing in my computer

  I tried to uninstall the drivers and reinstall them in the Device Manager, but the situation is still the same

  am confussed coz that the device is displayed in devices and printers, but usually leaves me to review files

  my pc is windows 7 32 bit

  Hi Philippe,.

  Thanks for posting your query on the Microsoft Community.

  This problem may occur if the Universal Serial Bus controllers has been corrupted.

  To help you better, please provide a few details:

  (1) what happens when you tried to browse the files of device UBS? He gets an error message?

  (2) what is the brand and model of the USB device?

  (3) have you checked the devices on other computers or other USB ports?

  I suggest you try the methods and check them off below if it helps.

  Method 1: check the status of the USB in Device Manager:

  1) go to control panel of configuration-Device Manager.

  (2) If you see a yellow exclamation mark next to the device, the driver is disabled and must be updated.

  Please visit the manufacturer's Web site to update your USB device.

  Method 2: run the tool and troubleshooting hardware devices.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  Change drive letter and paths if the devices are getting detected in disk management

  See the link below to change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Note: Also applies to Windows 7

  Method 4: uninstall all USB device manager entries.
  Note: this will make your functional USB devices like your IPod or the wireless network cards to stop working for a while until the USB drivers are re-loads.
  Follow the steps below:
  1) click Start and type devmgmt.msc in the search bar, and then click OK. Device Manager opens.
  (2) expand Bus USB controllers.
  (3) right-click the first USB controller under Bus USB controllers and then click Uninstall.
  (3) repeat step 3 for each controller USB is listed under Bus USB controllers.
  4) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  (5) check the USB device to see if it works.

  It can be useful, we meet with the status of your question. We will be happy to help you.

• I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

  I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

  Hello notnewbee,

  Thanks for posting on the Microsoft answers Forum.

  You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
  you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

  If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
  The information below will show you how you can make older programs run on Windows 7 here.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• do not show hidden files, folders or drives - in the view tab - button will not change

  • Windows explore-
  • Organize-
  • Folder options and research-
  • See tab-
  • do not show hidden files, folders or drives button (small blue dot)

  It will not disappear.
  There is no button 'Show hidden... '. ».
  There is only 'don't show me. " ' button.
  It will not change no matter what I do.
  Most other items in the view tab have check boxes or replacements to choose.
  This is not the case.

  I want to see everything.
  What gives?

  P.S. On a side note - I was looking for initially c:\programdata (directory). That's how all this started. I FOUND IT, is told in passing. HOWEVER - IT DOES NOT EVEN APPEAR ON THE PROMPT BACK - OMG.

  Just thought I would add that :)

  Hi JoeNed,

  I see that you have some problems with the display tab in windows Explorer. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  Start the computer in safe mode and check if that helps.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Method 2.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 4.

  You can try to restore the computer to a date earlier and check.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Method 5.

  I would like to create a new user account and check if that helps.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Do not message not showing on a slide

  Hi, I'm working on a video simulation 9 Captivate. Slides, where is the screen of the software and then I have a "back" (as opposed to text slides or menu) button. On some of these slides, I have a click box, and I put in place a failure message. When I have the back button does not trigger the failure message.

  Here is the chronology:

  

  Here are the click box settings:

  

  I think it's because the back button and the click box have a break. I tried to move the point of break the back button before the break of the click box, the same time as the click box and after the click box and there is no difference.

  When I saw the box click works (so it goes to the next screen) and made the button back but it does not show the fail message if I click anywhere else.

  Any ideas? Patches? Workaround solutions? Much appreciated!

  JO

  Hello world

  Not sure that the question, but we have an easy solution. We put the back button in a model of slides. If that is set for the screens of simulation it doesn't substitute the suspicion of fail to click. Hope that helps anyone with this problem!

  See you soon

  JO

• Trapcode particular not showing on Render but works very well in the compose window

  Trapcode particular not showing on Render but works very well in the compose window.

  Hi do not know why it does not appear in my Render.

  My computer is not trolling, everything works fine.

  My computer specs:

  I7 - 5820 k

  GTX 970

  16 ram

  Composition window:

  

  Render:

  

  Try adjusting the comp on camera Active - this is what happens for rendering. I don't know where you got this name of camera or whether it was imported from a 3D rendering, but to be sure to always have the comp set to camera activates when you're overview of your work.

  The usual troubleshooting procedure is to go to the bottom of the list of changed properties and start reset first those most suspicious. Many times it is easier if you solo the layer in question.

  The first suspicious that I see, it is the position of your transmitter would be behind a normal camera to default position:

  

  If I add a camera by default to a model, add a solid, add individual and then use your position parameters the particles all move out of sight of the camera

  

  After a reset: