Model of spectator in the user interface

Similar Questions

• The best way to separate the user interface in the model LV 2012 queued Message Handler?

  If you create a new "queued Message Handler" new model 2012 LV, you will see a blue box in the case of "Update view" that says the following:

  Code Recommended - If you wish to decouple the Message Handling Loop from your user interface, consider creating User Events (like the "Stop" event in this VI) to message the Event Handling Loop whenever the user interface needs updating.
  

  I would like to give a suggestion, but I am struggling to find the best way to do this and still keep code modular.  The template creates a user - Stop.lvlib "event with a create/Destroy/fire Subvi.  I would like to create a library of "User event - Update UI.lvlib" similar with similar Create/Destroy/fire Subvi keep this new modular and separate user event.  The problem, I am struck, is that there may be only two hydrants in case Structure dynamic event so, how I modularlize creating user events in separate SubVIs and always maintain this dynamic event terminals?

  As a follow-up on the issue, it would be preferable to have a library of user by indicator events that must be updated or that a single UI update of the user and then event pass a cluster as the message that contains the name of the control for the update (to use with a structure of matter), then the data to go with it?

  Thank you!

  Instead of having the events to record in the 'create' methods, you could be part outside your 'create' SubVIs and then simply bundle them. Then, you create your individual event of the user management. See excerpt where I created a vi 'Create user event - Update' in front of the stop.

  

• Model test using the interface user does not appear in the user interface

  I created a user interface for a model and trying to test it (using the model to test > start a new configuration > model UI (select user interface) > finish), it does not have the user interface, instead, it shows the summary of Configuration page. I checked the user interface, and there the correctly defined page flow. What is the reason for this and what is the solution. Thanks in advance.

  Check if you have associated page flow to the UI or not. Can be done in the edit page of the user interface.
  Check if you have added a page active in pageflow or not.
  Also make sure that you have visible page - page display of page condition is true.

• How to get TS::SequenceContextPtr to customize the user interface

  I want the file of the custom, user interface sequence value therefore need to take stock of the TS:equenceContextPtr, anyone know how to get this point.

  Is there a reason that UIMessages are not enough?

  Just off the top of my head, here are a few concerns with the not not using UIMessages:

  1. How the user interface is unknown when the file of the sequence is developed to set the value.  Without an event or some sort of synchronization you can do exactly that.  UIMessages not only to ensure the right information, but they help also with synchronization.
  
  
  2. The engine does not know this information, and view of execution manager knows that the information for the current execution it is linked to (which changes throughout the life of a series of tests).  Basically, recall of front end, model, and other factors may spawn short executions briefly related to the Manager view of execution.  So if you take the context of the sequence of the current run is perhaps not the right one.
  
  
  3. Writing a user interface will be couple the user interface to your specific sequence file.  At this point, you can use the network variables or global variables or global queues as well.  It might even be better options.

  The situation you describe is exactly why the UIMessages were created.  Maybe you can help me understand why you are set on the use of pointers, you already have?  There might be a better solution for your case if I'm misunderstanding you.

  Thank you

• Slow response from the user interface with acquisition of data of type long time

  Hi all

  I have a question to ask more out of curiosity than necessity right now. I've built a program that acquires data from the accelerometer and the Treaty in a number of ways: filtering, FFT, FRFS, things like that, but the answer of the UI is still slow, because I need a resolution of frequency of 0.2 Hz for my data domain, which means that the sample acquisition time is 5s and all this awaits before execution.

  My question is this: is there a way to completely isolate the user interface of data acquisition so that it responds immediately?

  I tried a design model of producer consumer with queues, but found everything to be always waiting for samples to be taken. Maybe it was exactly as I did.

  Thank you

  Phil

  If you need to sample for 5 seconds in order to have enough data to analyze, so unless you can "predict the future" and "knowing" the five seconds of data, simply wait for the data that arrives.  Using parallel loops of producer-consumer will allow data acquisition to proceed (for the next 5 seconds of data) while you do the analysis, but you still have to wait for the data to be analyzed.

  Note that the previous paragraph assumes you are collecting data in 5 seconds 'chunks' and analyze each "chunk" (independent) on arrival.  You could also do something like having a "second 5 sliding window" which moves, say, a second at a time, giving your FFT a finer resolution of 'time' (at the expense of their independence).  This would be a (slight) change in your loop of producer (you want to taste in 1 second pieces, accumulate 5 these pieces) and the consumption loop (start analyzing, spewing a FFT every second, while replacing the older "chunk" with the most recent - a queue with loss can do for you).

  Bob Schor

• Is there a way to change the number of Sockets of Test, the User Interface of CVI?

  I would like to have the number of sockets in an INI file, the User Interface would be read the value of the file and set the number of Sockets of Test.  I know that it is possible by adding a callback sequence, ModelOptions, to my files in sequence and by changing the setting.  How would you do it in the UI?

  You might have the user interface to read and edit the reportoptions config file as the process template (see the source code for modelsupport2.dll in \Components\Models\TestStandModels). But why do you need UI to do this? Why not simply substitute the recall of ModelOptions and he do there?

  -Doug

• The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Restart

  I created a ghost of a 32-bit 2003 server image and tried to restore the image on the same server of model\type. I got an error message with the following.

  The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Turn it back on.

  Tried to fix the server with the operating system and can not find the disk driver. I found the driver load it on a floppy disk, f6 entry, insert the diskette. I have a message with the following text.

  Type EXIT to exit the consul of recovery and restart the computer.

  1 C:\Windows

  which windows installation would you like to log on

  (to cancel, press enter)?

  Hi MichelZelensky,

  The question you posted would be better suited in the Windows Server Forums. I would recommend posting your query in the TechNet Forums (Windows Server).

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

• The ADF table: filter on columns of stamp with a specific format in the indications of the user interface

  Hi all

  I have problem when filtering on af timestamp column: table.

  I have a table containing historical information (created_on and modified_on), it is mapped to an entity:

  Type = "Oracle.jbo.domain.date"

  ColumnType = "DATE".

  I've seen object mapped from this entity.

  I want to display created_on and modified_on with timestamp (hour and minute), so I add the tips of the user interface for these 2 columns:

  -Type format: Date Simple

  -Size: MM/DD/YYYY HH: mm

  I create a table based on this point of view. The table is filterable.

  The column like this:

  < af:column sortProperty = "#{bindings." View.hints.CreatedOn.name}"blockable = 'true '.

  sortable = "true" headerText = "#{bindings." View.hints.CreatedOn.label}"id ="c6">

  < f: facet = name 'filter' >

  < af:inputDate value = "#{bindings." ViewQuery.queryDescriptor.filterConjunctionCriterion.criterionMap.CreatedOn.value}.

  ID = "id2" >

  < af:convertDateTime pattern = "#{bindings." View.hints.CreatedOn.format}"/ >

  < / af:inputDate >

  < / f: facet >

  < af:outputText value = "#{rank." CreatedOn}.

  shortDesc = "#{bindings." VIew.hints.CreatedOn.tooltip}"id ="ot6">

  < af:convertDateTime pattern = "#{bindings." View.hints.CreatedOn.format} ">"

  < / af:outputText >

  < / af:column >

  When I filter on 2 columns (created_on, modified_on) I got an error: " java.lang.IllegalArgumentException: ADFv: could not convert the instance: 30/07/2014 09:51 type: class java.lang.String in class of type null oracle.jbo.domain.Date."

  Do you have an idea for me?

  Thanks in advance.

  Here is the stacktrace:

  Caused by: java.lang.IllegalArgumentException: ADFv: could not convert the instance: 30/07/2014 09:51 type: class java.lang.String in oracle.jbo.domain.Date of type null class.

  at oracle.adfinternal.view.faces.convert.DomainConverter._throw(DomainConverter.java:155)

  at oracle.adfinternal.view.faces.convert.DomainConverter.convert(DomainConverter.java:120)

  to oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$ AdfFilterAttributeCriterion.getValue (FacesCtrlSearchBinding.java:5127)

  at sun.reflect.GeneratedMethodAccessor448.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:601)

  at javax.el.BeanELResolver.getValue(BeanELResolver.java:305)

  at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)

  at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)

  at com.sun.el.parser.AstValue.getValue(AstValue.java:138)

  at com.sun.el.parser.AstValue.getValue(AstValue.java:183)

  at com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:224)

  at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)

  at oracle.adfinternal.view.faces.renderkit.rich.ValueRenderer.getValue(ValueRenderer.java:195)

  at oracle.adfinternal.view.faces.renderkit.rich.SimpleInputBaseRenderer.renderContentStyleAttributes(SimpleInputBaseRenderer.java:524)

  at oracle.adfinternal.view.faces.renderkit.rich.FormInputRenderer.renderAllContentAttributes(FormInputRenderer.java:480)

  at oracle.adfinternal.view.faces.renderkit.rich.SimpleInputBaseRenderer.renderAllContentAttributes(SimpleInputBaseRenderer.java:230)

  at oracle.adfinternal.view.faces.renderkit.rich.SimpleInputDateRenderer.renderAllContentAttributes(SimpleInputDateRenderer.java:712)

  at oracle.adfinternal.view.faces.renderkit.rich.SimpleInputDateRenderer.renderElementContent(SimpleInputDateRenderer.java:592)

  at oracle.adfinternal.view.faces.renderkit.rich.FormInputRenderer.encodeAllAsElement(FormInputRenderer.java:169)

  at oracle.adfinternal.view.faces.renderkit.rich.FormElementRenderer.encodeAll(FormElementRenderer.java:165)

  at oracle.adf.view.rich.render.RichRenderer.delegateRenderer(RichRenderer.java:1828)

  at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.renderFieldCellContents(LabeledInputRenderer.java:244)

  at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.encodeAll(LabelLayoutRenderer.java:254)

  at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.encodeAll(LabeledInputRenderer.java:231)

  at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1578)

  at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)

  at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:1085)

  to oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer$ UIXColumnFilterWrapper._encodeChild (BaseColumnRenderer.java:2486)

  to oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer$ UIXColumnFilterWrapper.encodeChildren (BaseColumnRenderer.java:2454)

  at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1779)

  at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)

  at oracle.adf.view.rich.render.RichRenderer.encodeChildInContext(RichRenderer.java:3251)

  at oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer._renderOrVisitFilterFacet(BaseColumnRenderer.java:1938)

  at oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer.renderColumnFilterCell(BaseColumnRenderer.java:1324)

  at oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer.encodeAll(BaseColumnRenderer.java:168)

  at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1578)

  at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)

  at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:1085)

  at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1786)

  at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)

  to oracle.adfinternal.view.faces.renderkit.rich.table.BaseTableRenderer.access$ 2900 (BaseTableRenderer.java:78)

  to oracle.adfinternal.view.faces.renderkit.rich.table.BaseTableRenderer$ FlattenedColumnEncoder.processComponent (BaseTableRenderer.java:3155)

  to oracle.adfinternal.view.faces.renderkit.rich.table.BaseTableRenderer$ FlattenedColumnEncoder.processComponent (BaseTableRenderer.java:3129)

  at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:195)

  at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:326)

  at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:291)

  at oracle.adfinternal.view.faces.renderkit.rich.table.BaseTableRenderer.encodeFlattenedColumn(BaseTableRenderer.java:2928)

  at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer._renderFilterRow(TableRenderer.java:2508)

  at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer._renderColumnHeaderTable(TableRenderer.java:2113)

  at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer._renderColumnHeader(TableRenderer.java:1899)

  at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer.encodeAll(TableRenderer.java:727)

  Hello

  This is a bug in the ADF (Bug 17380741 not public) and it resolved in JDev 12.1.3.

  Kind regards

  Sébastien

• How to design the user interface of Indesign plugin cs6?

  Design of UI to the custom help c ++ library (SDK) for pluging is a work very tedious .so when I search on the net I found that we can do to help Adobe Creative Suite Extension Builder but I don't know how to use it to develop the user interface for the plugin and how to enable the management of events in this UI. I read a lot of document about it on the net, but they have all created a lot of confusion in my mind if someone can help me to know the steps I have to follow to develop the plugin using the this or whatever technology (action script, JavaScript etc)

  If you want to develop using Creative Suite Extension builder Extensions so I think that this is not the right forum for you. Thanks for posting your specific queries on the below mentioned link hotel

  http://forums.Adobe.com/community/creativesuites/cs_sdk

  To give a brief of how to develop the interface using JS ScriptUI user allows you to develop your user interface, it's a quick and an OS-independent approach to the development of the user interface. The user interface created using JS comes next. You can see the following link for more help on ScriptUI

  http://www.kahrel.plus.com/InDesign/scriptui.html

  I did not much info about the development of the CS SDK, but I can point you to one direction more than the dev called hybrid plugins that the user interface is created in CS SDK and appropriate methods are exposed plugin C++ (improve the script object model) to be called by the code CS for too and for communication between these two modules of code.

  Hope these pointer help you get started.

  Thank you

  -Manan

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• WIN8 registers touch but no reaction from the user interface?

  Anyone having problems with Win8 button when your fingers are clearly registered (Windows gives this feedback from the spherical ripple effect) but the user interface under your finger does nothing? No not the button and so on.

  I live it with some Chrome for example, with the small button tab when it is near the top edge of the screen.

  If I drag the window to the center of the screen, I have no problem with getting keys recorded. Hit the button new little tab gives no trouble.

  When user interface elements are close to the edge, no reaction, even if the wave indicator appears.

  Cannot know if it is a driver or a HW problem. I use X220T.

  Example screenshot

  May be a problem with Chrome, in fact. Tried with Firefox and the new tab button is a lot easier to hit. ---> will give Chrome devs a hint

  EDIT: what you know! The new beta version has already dealt with this issue:

  https://www.Google.com/chrome/browser/beta.html

• Flatten to a string to send arbitrary objects by messages from the user interface?

  Hi people,

  I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.

  It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.

  Is there something like uuencode/uudecode to avoid this problem?

  Thanks in advance

  Okidoki, found.

  His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.

  As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.

  It was trial and error, and I'm not enjoying this.

• Why me disables the user interface click on another button, while it performs a scan?

  Hello

  When I run the user interface and click on a button that is sweeping the voltage for a period of time, I can't press any other button that sits on my Panel, lets say the Abort button that would prevent the action.

  So when I take the data and I realize that I should stop him before he finishes the scan, I can't and it's a really bad drawback.

  How can I improve this problem?

  Thank you

  Hi m.s.taba,

  It seems to me that your code runs the function leave but does not exit the loop you are, then the program stops at the end of the loop.

  To avoid this, you can:

  • use a global variable to the time your long recall and the recall of quit smoking
  • Call ProcessSytemEvents in the loop
  • reminder for the button leave defines the global variable
  • inside the loop, immediately after ProcessSystemEvents, you should test the value of the variable, and if the value you must break out of the loop
  • only after the exit of the loop, you can complete your program

• How to get an array of integers to user in the User Interface

  Hi all. I'm not a very experienced user of the CVI. I have almost exclusively coding in LabVIEW but have a client who wants all of their work in the CVI.

  I've been very fruitful so far (set up a Modbus API from scratch that supports all types of connection) but am confused on how I can get the integer multiples of the user without limiting the number of integers I can get. Essentially, I need to be able to get an array of integers to the user.

  General information, I am building a user interface to test my Modbus API. There are Modbus functions to 'Write multiple registers' and 'write multiple coils. I want the user to be able to enter all the values they want to write in one command.

  What is the best way to get an array of integers through the user interface?

  The easiest way is probably to allow user input in a textbox control numbers: items can be separated by spaces, commas, or even a line break (using ctrl + Enter). You will then need to extract the string from the TextBox and analyzed for numeric values using any non-digit character as a separator: strspn (string, '0123456789'); can be used for this.

  More complex, another possibility is to use a table control to receive user input: you Dresses an empty table with a reasonable number of roews, or you need some codes to add new lines as long as the user fills all those already existing. On the other hand, it will be easier since data recovery in a simple statement, you will all return values: GetTableCellRangeVals (panelHandle, PANEL_TABLE, VAL_TABLE_COLUMN_RANGE (1), table, VAL_COLUMN_MAJOR);