modem internal not allowing not computer go into sleep mode
My internal modem will not allow my computer to enter the mode 'sleep'. I tried to disable the modem completely because I do not use it, but this has not fixed the problem. Also sometimes my monitor will enter a screen in economy mode and will not come out of it, the computer does not respond when I move the mouse. I have to turn it off completely for a response. I don't know if the two problems are related. What can I do?
Hello
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
-------------------------------------------
Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
similar are not enabled.
Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htm
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html
How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686
Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)
All the default power plans and then set them as you wish.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
When my computer goes into sleep mode, sometimes refuses to wake up. BlueScreen
When my computer goes into sleep mode, sometimes refuses to wake up. It can go up to an hour and when I finally get it to turn back, I get the following blue screen message:
Signature of the problem:BCP1: 0000000000000003BCP2: FFFFFA80094F7A10BCP3: FFFFF80000BA2748BCP4: FFFFFA800B570010OS version: 6_1_7601Service Pack: 1_0Product: 256_1It can help to look at the files minidump against accidents with a debugger.
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop
In addition, you do not necessarily have compress the minidump files, you can download one at a time.
-
original title: sleep/hibernation
When my computer goes into sleep mode, I have to press the power button to turn it back on. I used only having to press a key on the keyboard.
Can someone tell me how to solve this problem, as if it was before?
Well, on the theory that your computer is awkward, try to change the settings to another thing and OK your way out the control panel. Then go back and put them in the way they were and OK your way out. Occasionally, it will reset the internal parameters and things can return to normal.
HTH,
JW -
computer goes into sleep mode every 5 minutes
My computer goes to sleep every 5 minutes in standby mode and needs to get back to where I left my password. I tried to change the power options, but he keeps doing. If I'm watching a video, the screen turns off and ask for my password, but you can still video game.
Hello
Open windows control panel, open personalization, click on the link to screensaver at the bottom right and in the next window, set the time in the area of 'Wait' for once you want before the screen saver appears, and click on apply. Or if you never get the logon screen, remove the check mark next to of "on resume, display the login page» Click on apply to save the changes.
Then open windows control panel again and click on Power Options, click Change plan settings next to your current power plan selected in the next window, set the time using the drop-down list next to "Turn wide Display" to a more acceptable level and then click on save changes.
Note: Set in the Options menu of food to be slightly longer than the time set in the Menu of the screen saver or you will never see your screen saver start.
Kind regards
DP - K
-
Windows 7 computer goes into Sleep Mode while the activity of the system
Hello, I have windows 7 premium. I think there may be a bug that needs to scan, my system goes to sleep while there is the activity of the system. For example, when downloading a file, do a virus or by post where analyze or defragment. I believe that the year 2010 are the operating systems with the smart enough so that the system is active and goes to sleep during execution of these programs are active. Can someone tell me if this is a bug or suggest software to keep the system awake while 'X' program options is actively running, for example if I do a defrag of HDD, I don't want to change power if the computer is running all night, only for 2 or 3 hours that the scan is running Once the program ends defrag'ing the systemit should then wait for the time set in power options and stop.
Hello
If there is no interaction from the user to a certain amount of time, the computer goes into a sleep mode was
application runs in the background. This isn't a bug. You may need to change the settings for options of power as a result.Sleep and extended: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
Change, create, or delete a power plan (scheme)
http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-schemeThanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Whenever my computer goes into sleep mode, I lose my internet connection.
When I 'wake up' my computer, the internet icon in the taskbar seems to be connected, but it is not. When I diagnose the problem, it is said that he lost the DNS connection. I then have to reset the adapter, and it will connect. It loses connection every time "standby mode". Patches?
mrslaurae,
Thank you for visiting the Microsoft Answers community forum.Here are a few things to try to solve this problem:
To clear the DNS cache:
Click Start, type cmd in the search box, and then click cmd in the list programs.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
Once at the command prompt, type ipconfig/flushdnsTo reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
http://support.Microsoft.com/kb/299357Disable IPv6:
1. hold down the Windows key and type R, enter "ncpa.cpl" (without the quotes) and press enter
2. right click on each network connection, and then select "Properties".
3 remove the check mark from the box 'Protocol Version 6 (TCP/IPv6) Internet
4. click on OK to exit the dialog boxNOTE: You should do this for each network connection.
Let us know if this solves your problem or if you need more information.
Thank youGloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows wireless service turns off when the computer goes into sleep mode
Windows 7 64 bit, HP DV4 laptop. Was working fine until the update of adobe reader may also have a windows update. Have since been uninstalled adobe reader software and reinstalled. Updated the qualcom wireless driver. WLAN keeps logging service when my laptop goes to sleep. I can restart with services and it works again. Autoconfiguration WLAN service is set to restart the service for 2 trys.
Hello
. You receive an error code or message?
Please follow the methods and mark the question below:
Method 1:
You need perform a clean boot to prevent possible ask contradictory from interfering with your computer.
To put the computer in a clean boot state, you must follow the steps in the article mentioned below. How to solve a problem by performing a clean boot? : For more information on the execution of clean boot, follow the link.
http://support.Microsoft.com/kb/929135
Note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.
Method 2:
Using the troubleshooter from network in Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 3:
Why am I disconnected from my network? :
http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network
Method 4:
Wi - Fi and in Windows network connection issues:
I hope this helps.
-
Computer goes into sleep mode automatically
Original title: waking up from sleep
Hi, I have windows 8, I have a question that has not already happened in win 7
Then, when I put my computer on standby covering the screen down. And when I wake up, I had to press or on the keyboard, the Start button / stop or mouse button. the computer turns on itself. so for about 4 seconds it shuts itself again. the second time by the press of the keyboard and etc will not turn the computer off again.There is a small problem, but its getting really boring, time on the computer turns off by itself again is like 10 seconds of frustration, and I turn it back on, it's just really annoying after months. I thought that I have will get used to it, but nope.Hi Ianlei,
We are happy to know that you have solved the problem.
Please let us know if you need any other assistance on problems with Windows.
-
If I don't use the computer, after 10 minutes, it disconnects on me and I have to sign in with my password back, sometimes I have people use my computer and I don't want to have my password thanks for any help you can provide Kirsh
Hello
Click on the Start Menu, type personalization and press ENTER. Click on the link of the screensaver at the bottom right and in the next window, Remove the tick from the box "on resume, display logon". Click on apply, then Ok to save the change.
Kind regards
DP - K
-
Will be that the download stops when the computer goes into sleep mode?
Will download, install, or all these action stops when the laptop goes to sleep.
MK
Yes, it will be.
-
Satellite M40-110: WLan is not working properly after sleep mode
Hello, I have a M40-110. I have some problems with my wireless adapter. After I closed the screen (bed) and the computer goes into sleep mode, I open the computer screen becomes active, but this time the wireless adapter is not working properly and I can't connect to Internet with my wireless adapter. Sometimes, it seems that the wireless adapter has established a connection, but I can't send and receive data from the Internet. Sometimes after this case, the wireless adapter becomes invalid.
My Service offered to enable the bios wake-up-on-lan option. After doing this, the Internet worked properly.
But I am wary about this option:(1) not allowing this option cause draining my battery quickly?
(2) this option doesn't make that hides my hardware failure (wireless card) and it is really necessary to solve this problem?Thank you
Sinan.Cool, thanks for the info
-
original title: will BE BACKUP OCCUR IF MY LAPTOP GOES TO SLEEP MODE? (WIndows 7)
I have my laptop value backup at midnite. I have the computer goes into "sleep" mode before. Is my computer still backup as expected?
You can get the Task Scheduler to wake him up.
You can configure the backup form program timed task in the Task Scheduler with the game of "wake up to perform this task. Depending on what you use for backups, the backup application can already use Task Scheduler & all you need to do is add the "wake up to perform this task" setting.
To open Task Scheduler, type 'Planner' in the search box of the start menu. Search in the left pane and select its library. Browse the tasks in the list that has your backup program in its "Action" tab Make a copy [a test version] 1 by clicking Export in the right pane & recording in an easily accessible folder, 2 when you rename the file in the selected folder [simply add 'Test' at the beginning of its name] 3 click on import in the right pane to bring in the copy renamed the task from the same folder.
Now you can play safely & just disable the test version when you are finished. The main change would "allow to wake up...." "and it's in the conditions tab.
If it works, let the enabled test version & disable the original for a few days while you're fairly confident that the new version works. Then you can delete one of them - but only after have exported them again if you know that you can recover later.
-
Photosmart WSP 5514 stops my Dell Vista desk top of page 68 to go into sleep mode
My photosmart 5514 is set up wireless. When I try to put my Dell desk top with Vista Home Premium 68 pending, I get a message that the driver for the WSP device prevents goiing pending and I am encouraged to communicate with the manufacturer which is HP. I also have a problem that the scan function can only scan to my laptop and not on my desk even if both are on the same network I don't know if the two probs are related. I tried several times to update or reinstall the drivers from HP website of HP and from the drive. The issue (s) outstanding. I can bypass the prob of scan but not the prob of sleep.
Hi DanToz
I understand that the port is set to WSD, is that correct?
I have provided a document to print the configuration page to find out the IP address of the printer.
You have full administrative rights on this computer?
The HP 5510d is the series so that's fine.
If you cannot create a new port on the ports tab, then you probably don't have administrator rights on this computer.
You would have to contact you with the it Department to be able to do then.
You need TCP/IP port port.
You turn off the printer to see if the computer goes into sleep mode?
-
I'm not able to put my computer into sleep mode
I'm not able to put my computer into sleep mode
That looks pretty good except some parts are cut for some reason any... GATEWA instead of entry door? Never seen that before!
For this kind of issues Stand-By and hibernation, I tend to start thinking about video drivers.
You did not provide the requested information on your video drivers or the way in which your Stand By button behaves right now.
If you did a system recovery from the CD supplied with your system, drivers on the recovery CD may be outdated or you may have updated your system in the past - that's why it used to work.
I could go to the wide wide world of eMachines Web page and see if you have the latest video drivers and update your system if necessary:
http://www.eMachines.com/support/drivers.html
Looks like you need VGA driver version 6.14.10.3889.
You can find your current version by following the previous instructions.
In the meantime, since you think that your system has a type of infection, I also recommend to do this:
Download, install, update and do a full scan with these free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.
The scans by operating clean, then to solve any problems.
Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
What printer goes into sleep mode computer stops
just got a hp7520 as a gift. updated from xp to 7. If the printer goes into sleep mode, the computer shuts down. currently I'm keeping the printer in demo mode so that it does not expire. Anyone know how I can use printer without him turning off the computer in normal mode? I talked about Noone has even heard of that happening. I hope someone can help. Thank you!
Hi @JNBLanocha
My stomach says mt that perhaps you have the printer USB cable connected to a USB 3.0 port on your computer instead of a 2.0 port. The image below is some examples of 3.0 ports.
3.0 ports are supposed to be backwards compatible, but I've seen questions arise.
I wonder if the cable you are using is the computer and causing problems pulling power. All I can do at this stage is to assume and to gather information. Please post back with the answers to the following questions;
- You have a USB connection
- If the USB is connected, you use a 2.0 port or 3.0?
- Again, if you use a USB connection type, have you tried another USB cable? It could be a cable problem.
- You put XP or you remove XP and install Windows 7?
- You have your printer connected directly to a power outlet, or you are using a power strip/bar, or a surge protector?
- Now this may sound silly, but you have a timer on your computer, such as the hibernate after so many minutes and maybe the computer and the printer are set at the same, it is possible the moment closures / sleep coincide.
I look forward to hear from you and to work towards a solution.
Maybe you are looking for
-
How can I save to iCloud?
I have an iMac running El Capitan. I filled my external hard drive 1 TB using Time Machine. I'm ok with most recent backups remaining on the external hard drive, while Time Machine deletes older backups. I recently bought the 200 GB storage on iCloud
-
Hello I have a NI PCI-6014 card with a card BNC 2120 DAQ and Labview 8.6. I'm trying to transmit digital signals, but only the digital IO port $line0 responds to my orders, while lines 1 to 7 don't work at all in Labview. With the measurement and Aut
-
The file name, directory name or volume label syntax is incorrect.
I have a program which accepts command-line arguments. The diagram that I have adopted is that each command line argument is shaped like this: x:argument where x is a letter that corresponds to a switch (as a mode of operation and the argument is an
-
UPDATE! Poor results Area 51 R2 6900 k CPU
It is a call to the community of owners of 6900 k area 51 R2 there for it please let me know your results, as you can see below the buff performance after 'upgrading' of the k 5930 lower stella, and as Dell support are unable to help me confirm the r
-
Charger for HP Mini 1033 CL PC
Looking for a car charger compatible for HP Mini. Recommendations?