modern warfare 2 will work?

On my computer, I have 2.00 GB of RAM

processer based Intel pentium dual,

@ 2.00 GHz.

32-bit operating system

but I have windows vista and all over the internet it says that it only works on windows 7 or XP

will it work on my computer?

-----------------

Tags: Windows

Similar Questions

  • Games - Modern warfare 3 will not load on xp

    Modern warfare 3 will not load on xp

    Please check the availblities of material:

    Modern warfare game 3 requirements:

    Modern Warfare 3
    System requirements [adjusted GD]

    GD hardware rating Diff
    Intel CPU - Pentium Dual Core E6600 3.06 GHz Connect you to compare your CPU
    AMD PROCESSOR - Phenom 8750 Triple-Core
    NVIDIA
    GFX card
    - GeForce 8800 GS Connect you to compare your GFX card
    ATI
    GFX card
    - Series of Radeon X 1900
    RAM
    (Memory)
    - 3 GB
    Hard drive
    space
    - 16 GB
    Direct X - 9
    Kind regards
    J Chambers
  • Call of Duty 4: Modern Warfare, it will play on my computer?

    I have a Gateway laptop with specs:

    Microsoft Windows Vista, Intel Core 2 Duo processor t6400, 2 mb l2 cache, 2 GHz, 800 MHz

    Memory: 4 GB DDR2
    Video: Mobile Intel Graphics Media Accelerator 4500MHD
    Hard drive: 320 GB

    Will this game on my PC? Help please, I want to play this game but don't want to buy this game whether it won't play! Also, why everyone says things about video cards? What is a video card? Why do you need 1?

    With integrated graphics, this will probably double run, but probably not too well. On video cards... basically, you need a higher video card end of run of higher end games. Most of the computers that you get will come with a video card pre-installed that will work very well, but not for games. You can buy a pretty good card for about $100 these days, unless you use a laptop computer (you cannot change the video card in the laptop).

  • I can't get my game controller dual action of logitech to work on the game modern warfare 2

    It is recognized by my computer. It calibrates and runs on computer games.

    Hello heclaimsane,

    1. the game controllers work normally on your computer when you use the keyboard?

    I see that there are known issues with the game controller and the game Modern Warfare 2 controller. I see that some users were able to solve this problem by creating new profiles of games. However, I suggest that you post your question on the support forum of Logitech for a better answer to your question. Here is a link that you can follow to ask your question:

    http://forums.Logitech.com/T5/PC-gaming/BD-p/PCGaming

    You can also check the thread below in which the users speak the same question:

    http://forums.Logitech.com/T5/PC-gaming/call-of-duty-modern-warfare-2-gamepad-problem/TD-p/401323/page/6

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Using an XBOX 360 controller wireless for PC with game of Modern Warfare 2.

    Just wondering how to get the controller to work for Modern Warfare 2.  I know the controller is correctly configured, but it will not work in the game.  What should I do?

    Hello

    MW2 on PC does not support the XBOX 360 controller:

    http://store.steampowered.com/app/10180/

    Solo
    Multi-player
    Co - op
    Successful Steam
    Steam Cloud
    Valve anti-cheat active
  • Error 1603 & 2711 when installing the Call of Duty 4 Modern Warfare.

    Original title: error 1603 & 2711

    When you install the Call of Duty 4 Modern Warfare I get these errors. 2711 & 1603. This game has already been installed from the cd and wanted that the player so unique downloaded game would not require the cd.

    I tried to run in XP compatibility mode the same sp and vista, and run as admin and error codes always the same problem. I changed the name of the folder Activision to Activision1 so the new facility will not see the original file of the game. Please give me one I dea on how to solve this problem.

    Thank you

    Hello

    Method 1: Restart the computer by using a clean boot procedure.

    Perform the steps of: perform a clean boot to determine if background programs interfere with your game or program

    Note: to restore your computer to a Normal startup mode, follow these steps:

    (a) click Start in the box start the search.

    (b) type msconfig and press ENTER.

    (c) If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

    (d) on the general tab, click Normal Startup - load all device drivers and services and then click OK.

    (e) when you are prompted, click on restart.

    Method 2: Disable UAC (User Access Control) and check if that helps.

    Enable or disable the User Account Control

    Important: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that requires an administrator-level permission. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Modern Warfare 2 recommended Configuration?

    I went on system requirement Lab today and checked Modern Warfaer 2. Too bad they were only minimum requirements of the game for the game and I went there. So I want to know if I can run the game on the highest settings. I could run Call of Duty 4 on the highest settings, but Modern Warfare 2 has better graphics.

    My computer:

    Intel Pentium D 3 GHz

    3.25 GB OF RAM

    ATI Radeon HD 4670 1 GB

    Windows 7 32 bit

    Here is the MW2 plug recommended:
    Processor

    Intel Pentium 4 3.2 GHz or AMD Athlon 64 3200 processor + or better supported.

    Memory

    1 GB OF RAM

    Graphics

    256 MB NVIDIA GeForce 6600GT or better or ATI Radeon 1600XT or better.

    DirectX

    Microsoft DirectX 9.0

    Hard drive

    12 GB of free hard disk space

    Sound

    100% compatible DirectX 9 .0c card compatible sound.

    If the "D" to the pentium D dual-core (I forgot if this is the case), then you will be able to play easily

  • Call of Duty: Modern Warfare 2

    Hello

    This is not the first topic on the problems with Call of Duty MW2 NAT

    I bought the WRT120N has a few months ago because I got faster internet (20 Mbps).

    I checked CoD MW2 If NAT was open, it was not. I did some research on the internet and after a few attempts the NAT was finally open.

    The computer is connected via a cable.

    About 2 weeks ago, it was closed again. I don't know why, I changed nothing on the configuration of the router.

    Sometimes I save my options again without changing anything and it will open. But now it does not even help

    I made some screenshots and maybe someone can see the mistake I made or something.

    Le.100 and the end of the ports are correct, as you can see here.

    I hope someone can tell me what to do with the NAT will remain open all the time

    Kind regards

    Robin Cornelissen

    The Netherlands.

    In order from highest to lowest priority for QoS users) =:

    Steam client

    • UDP 27000 to 27015 inclusive (client traffic to the game)
    • UDP 27015 to 27030 inclusive (typically Matchmaking and HLTV)
    • TCP 27014 to 27050 inclusive (steam downloads)
    • UDP 4380

    Dedicated or listen servers

    • TCP 27015 (SRCDS Rcon port)

    Additional ports for Call of Duty: Modern Warfare 2 multiplayer

    • UDP 1500 (out)
    • UDP 3005 (out)
    • UDP 3101 (out)
    • 28960 UDP

    Try to add also the 4380 UDP and TCP 27015 to your Port Forwarding card.

  • Questions of WRT54GL with the XBOX 360 Modern Warfare 2 chat (even with open NAT)

    Hello

    I read a few posts on the subject, but can't seem to make it work.  I tried port forwarding, UPnP and DMZ on their own or at the time and the best I could do is get a "open NAT" in modern warfare, allowing me to play online.  However, I do hear not others when you play online.  I can tell they speaking by looking at the icon of speaker beside their name between games, but cannot hear them...  I can hear people in my private chat or part without problem.

    Can you guys help me?  It's hard to read dominance without being able to communicate with his teammates.

    Oh gawd...  I feel like a noob...  It turns out it wasn't my router settings at all.  Somehow, I got my 'privacy settings' in XBOX Live set to "Discuss with friends only" or something similar.  I now opened it at all and it works fine.

  • (Initialization error: cannot load fileSysCheck.cfg Make sure that Call of Duty: Modern Warfare 3 is run from the appropriate folder). "

    After installing this game on a dell Inspiron 1545 computer, when I try to run the game, it starts to market and then, this error message

    "Error during initialization: failed to load fileSysCheck.cfg Make sure that Call of Duty: Modern Warfare 3 is run from the correct folder"

    By Teknogods

    If it is a file that may be missing I will have to check see if I can find it online.

    All the tips are more grateful, thank you.

    Teknogods is the source of the problem, not the game of basic or Windows.

    When using mods, that you'd better ask your question on the Teknogods or similar modding forum.

    .

  • How do you get call of duty 4: modern warfare to run on windows 7?

    call of duty 4 modern warfare will only race on solo with windows 7 when I go to play in multiplayer mode, it freezes and comes up saying close the program or to find a solution online. I went to play with the recommended settings, I restarted, and he said he did not find the main folder iwd files, I checked the main folder and they were all there. I re-istalled the game and the same thing happened, please help.

    --------------

  • I want to move to HTML5 of XHTML. HTML5 will work perfectly in DW CS3?

    I have several questions until I make the changes on my site that I need to do and I really appreciate the help so far. I'll try to keep my short questions and ask them 1 at a time. As I asked above: I want to move to HTML5 of XHTML. HTML5 will work perfectly in DW CS3?  The reason that I ask is because I changed one page in HTML format, as suggested and I still don't see not the text of the caption of the label of legend is in the DW Design view. I also get a lot! messages when I press on the button "validate the markup" in DW. Most of the! s refer to HTML 4, which is what my Version of DW (CS3) must be assuming that I use.

    I just thought that using another code editor next to the ancient Dreamweaver editor can help you. Try it for free media - a code editor open modern source, which includes site. web design Editor. I do even if I use the latest version of Dreamweaver.

  • I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

    I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

    It is impossible to tell from this information. Choose about this Mac from the Apple menu, click more information and search the model identifier.

    If it's MacBook1, 1, 10.6.8.

    If it is MacBook2, 1-MacBook4, 1, 10.7.5.

    If it's MacBook5, 1 or MacBook5, 2, 10.11.6.

    If it's MacBook6, 1 or greater, 10.12.

    (144865)

  • InDesign CS5 will work with MacOS Sierra?

    Has anyone tried to see if InDesign CS5 will work with MacOS Sierra? I have creative cloud and CS5 on my machine, but due to some of the things that I have to work that only work with CS5 to CS6 I have to keep my old software. I hesitate to upgrade to Sierra until I know if InDesign CS5 will work or not.

    If anyone has tested this, I would be recognizing the return flow, thank you.

    It really depends what you do with it, and a large part of the framework has changes in the operating system for how the application is designed to run in. Your workflow can cause problems when the application works for others or you might be able to use it, but keep in mind has more no support for CS5 Adobe or Apple, so do not expect to solve any problems that you can discover.

  • Buy iPhone7 of the United States will work in India

    Hello!!!

    My brother brings iPhone 7 (factory unlock) for me as a gift of Deepawali (Festival). India it will work correctly.

    Rgds,

    Punishes

    Yes, it will work, if she has unblocked it himself if not you will have to unlock here. Apple will release sim free version after a few days, if he buys ask him to get it.

Maybe you are looking for

  • Accidentally downloaded Mac not iPad

    I bought an application designed for the iPad, but - don't think not - has done with my Macbook Pro. Of course, it does not work on OSX, and I want to do on my iPad where it belongs. Can I move the application on and then to install it (I think it's

  • How can I copy my favorites without using Firefox Sync?

    I'm not comfortable putting my personal information on an online server, which is what I do with Firefox Sync. Is it possible to copy my favorites on a flash drive, as we used to be able to do?

  • Where can I download Vista for my Equium A100-337 utilities

    OK, I bought a new laptop last week a satellite A100-337, everything works well, but because that since I already had vista ultimate and some alphas, I tried to install allongside vista I had to reformat. So ive just got up and run again, but ive los

  • Outputs analog simultaneous NOR-DAQmx USB-6211

    Hi all

  • Windows 7 operating system recovery

    Maybe it's one of the rare scenarios, but I'm here. I bought a hp laptop Pavilion g6 2004tx with os windows 7 Home Basic. For some reason, my hard drive crashed and was no longer bootable. Therefore, recovery drive came with no help and restore point