Modern Warfare 2 recommended Configuration?

Similar Questions

• Error 1603 & 2711 when installing the Call of Duty 4 Modern Warfare.

  Original title: error 1603 & 2711

  When you install the Call of Duty 4 Modern Warfare I get these errors. 2711 & 1603. This game has already been installed from the cd and wanted that the player so unique downloaded game would not require the cd.

  I tried to run in XP compatibility mode the same sp and vista, and run as admin and error codes always the same problem. I changed the name of the folder Activision to Activision1 so the new facility will not see the original file of the game. Please give me one I dea on how to solve this problem.

  Thank you

  Hello

  Method 1: Restart the computer by using a clean boot procedure.

  Perform the steps of: perform a clean boot to determine if background programs interfere with your game or program

  Note: to restore your computer to a Normal startup mode, follow these steps:

  (a) click Start in the box start the search.

  (b) type msconfig and press ENTER.

  (c) If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  (d) on the general tab, click Normal Startup - load all device drivers and services and then click OK.

  (e) when you are prompted, click on restart.

  Method 2: Disable UAC (User Access Control) and check if that helps.

  Enable or disable the User Account Control

  Important: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that requires an administrator-level permission. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Using an XBOX 360 controller wireless for PC with game of Modern Warfare 2.

  Just wondering how to get the controller to work for Modern Warfare 2.  I know the controller is correctly configured, but it will not work in the game.  What should I do?

  Hello

  MW2 on PC does not support the XBOX 360 controller:

  http://store.steampowered.com/app/10180/

  Solo

  Multi-player

  Co - op

  Successful Steam

  Steam Cloud

  Valve anti-cheat active

• Call of Duty: Modern Warfare 2

  Hello

  This is not the first topic on the problems with Call of Duty MW2 NAT

  I bought the WRT120N has a few months ago because I got faster internet (20 Mbps).

  I checked CoD MW2 If NAT was open, it was not. I did some research on the internet and after a few attempts the NAT was finally open.

  The computer is connected via a cable.

  About 2 weeks ago, it was closed again. I don't know why, I changed nothing on the configuration of the router.

  Sometimes I save my options again without changing anything and it will open. But now it does not even help

  I made some screenshots and maybe someone can see the mistake I made or something.

  

  

  

  Le.100 and the end of the ports are correct, as you can see here.

  I hope someone can tell me what to do with the NAT will remain open all the time

  Kind regards

  Robin Cornelissen

  The Netherlands.

  In order from highest to lowest priority for QoS users) =:

  Steam client

  • UDP 27000 to 27015 inclusive (client traffic to the game)
  • UDP 27015 to 27030 inclusive (typically Matchmaking and HLTV)
  • TCP 27014 to 27050 inclusive (steam downloads)
  • UDP 4380

  Dedicated or listen servers

  • TCP 27015 (SRCDS Rcon port)

  Additional ports for Call of Duty: Modern Warfare 2 multiplayer

  • UDP 1500 (out)
  • UDP 3005 (out)
  • UDP 3101 (out)
  • 28960 UDP

  Try to add also the 4380 UDP and TCP 27015 to your Port Forwarding card.

• How do you get call of duty 4: modern warfare to run on windows 7?

  call of duty 4 modern warfare will only race on solo with windows 7 when I go to play in multiplayer mode, it freezes and comes up saying close the program or to find a solution online. I went to play with the recommended settings, I restarted, and he said he did not find the main folder iwd files, I checked the main folder and they were all there. I re-istalled the game and the same thing happened, please help.

  --------------

• black box on modern warfare 3

  is the black box on modern warfare 3 a original card because I disabled the dlc maps and it still happens?

  try call of duty forums

  http://community.callofduty.com/community/MW3/forums

• I can't get my game controller dual action of logitech to work on the game modern warfare 2

  It is recognized by my computer. It calibrates and runs on computer games.

  Hello heclaimsane,

  1. the game controllers work normally on your computer when you use the keyboard?

  I see that there are known issues with the game controller and the game Modern Warfare 2 controller. I see that some users were able to solve this problem by creating new profiles of games. However, I suggest that you post your question on the support forum of Logitech for a better answer to your question. Here is a link that you can follow to ask your question:

  http://forums.Logitech.com/T5/PC-gaming/BD-p/PCGaming

  You can also check the thread below in which the users speak the same question:

  http://forums.Logitech.com/T5/PC-gaming/call-of-duty-modern-warfare-2-gamepad-problem/TD-p/401323/page/6

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Call of Duty 4: Modern Warfare w graphic issues / windows 7

  Hello

  I recently bought Call of duty 4: Modern Warfare. When I started the game I chose first execute the optimal settings to ensure the right game. Well, the game place horrible extremely rough very low rates and some problems of rendering with strange colors here and there. I tried to update my video drivers and I have the latest drivers. Any help would be appreciated... Thanks in advance.

  Specifications of the computer:

  -Windows 7 64 bit

  -AMD Phenom II x 4 830 ~2.8GHz processor

  -8 GB Ram

  X 11 direct

  -Built-in ATI Radeon HD 4200 3GBs of RAM

  --------------------

• Games - Modern warfare 3 will not load on xp

  Modern warfare 3 will not load on xp

  Please check the availblities of material:

  Modern warfare game 3 requirements:

  Modern Warfare 3 System requirements [adjusted GD]	GD hardware rating	Diff
  Intel CPU	-	Pentium Dual Core E6600 3.06 GHz		Connect you to compare your CPU
  AMD PROCESSOR	-	Phenom 8750 Triple-Core
  NVIDIA GFX card	-	GeForce 8800 GS		Connect you to compare your GFX card
  ATI GFX card	-	Series of Radeon X 1900
  RAM (Memory)	-	3 GB
  Hard drive space	-	16 GB
  Direct X	-	9

  Kind regards
  J Chambers

• Questions of WRT54GL with the XBOX 360 Modern Warfare 2 chat (even with open NAT)

  Hello

  I read a few posts on the subject, but can't seem to make it work.  I tried port forwarding, UPnP and DMZ on their own or at the time and the best I could do is get a "open NAT" in modern warfare, allowing me to play online.  However, I do hear not others when you play online.  I can tell they speaking by looking at the icon of speaker beside their name between games, but cannot hear them...  I can hear people in my private chat or part without problem.

  Can you guys help me?  It's hard to read dominance without being able to communicate with his teammates.

  Oh gawd...  I feel like a noob...  It turns out it wasn't my router settings at all.  Somehow, I got my 'privacy settings' in XBOX Live set to "Discuss with friends only" or something similar.  I now opened it at all and it works fine.

• (Initialization error: cannot load fileSysCheck.cfg Make sure that Call of Duty: Modern Warfare 3 is run from the appropriate folder). "

  After installing this game on a dell Inspiron 1545 computer, when I try to run the game, it starts to market and then, this error message

  "Error during initialization: failed to load fileSysCheck.cfg Make sure that Call of Duty: Modern Warfare 3 is run from the correct folder"

  By Teknogods

  If it is a file that may be missing I will have to check see if I can find it online.

  All the tips are more grateful, thank you.

  Teknogods is the source of the problem, not the game of basic or Windows.

  When using mods, that you'd better ask your question on the Teknogods or similar modding forum.

  .

• Recommended configuration of WLC 2504 SSID with AD

  Hello

  I would ask, what oyou d think that is now the best practices and recommended solution how to configure SSDID on 2504 WLC for the following scenario. I'm new to WLC and would like to secure network.

  -any type of customer must be supported (08/07/10 win, mac, linux, iOS, android, windows mobile)

  -authentication on Win 2012 R2 NPS as RADIUS

  -any requirement of certificate client (we don't want PKI configuration for now), we want to just WLC certificate as an authentication point

  is enough [WPA2] [Auth (802. 1 X + CCKM)] who will have radius configured?

  Thank you

  Well Yes, check these

  http://www.Cisco.com/c/en/us/support/docs/wireless-mobility/WLAN-Securit...

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/4-2/configurati...

  Eat local point concerns small size as a small office deployments.

• Recommended configuration for VCenter and SAN

  Hello

  I learn to vmware to some extent and have a question or a request for recommendation on vsphere configuration.  I have install vsphere on a phyiscal on w2k8 server that has the vclient and the vcenter server.  This server also manages the back-end by iSCSI storage.  There are two ESX host, connect to the network, each execution of a few guest computers w2k8, and I have a guest configure with a primary domain controller ADDS and another on the other host as a replica domain controller.

  Whenever my physical with vCenter server running on it gets the Windows updates, it asks me to restart.  This seems problematic, because I have to turn off all my virtual machines because they depend on the storage of the server that requires a reboot.

  I read that vCenter can live in a virtual machine as well, but it seems that it would make me a little further.

  Is there a better way to do it?  How can I keep my VMs running in order to update the storage server requires a reboot?

  Thank you very much!

  As long as the virtual machines stored the common storahe presented by windows server, you have to stop the virtual machines each time that you update the operating systems on the storage server - storage works fine your forces don't need update as often.

  I would recommend to move your VC serverto a separate machine either virtual or physical

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Recommended configuration for laptop

  I am looking for a laptop to the workstation capable of managing Affairs (large spreadsheets, PowerPoint presentations) and Premier Pro (CS6/CC) set-up when I am traveling and away from my computer video studio HD.

  I would be grateful the thoughts of the members of this forum on the NP8678-s Sager (Clevo 670RG) with the following custom configuration:

  • 17.3 "FHD 16:9 FPS with Matt Finish (1920 x 1080) LED backlit
  • Skylake i7-6700HQ (2.6 GHz - 3.5 GHz, 8 MB Intel Smart Cache)
  • NVIDIA GEForce GTX 980M (8.0 GB) GDDR5 PCI-Express DX11 (Maxwell)
  • 32 GB DDR4-2133 MHz [2x16GB] twin expandable memory to 64 GB
  • 500 GB Samsung 850 EVO m2 SSD system drive
  • Second 500 GB Samsung 850 EVO m.2 SSD Scratch disk slot
  • 1 TB 7200 RPM (data drive SATA II 3 GB/s]
  • 1xHDMI, 2xMini Display Ports 1.2, combined 1 eSATA/USB 3.0, 1xheadphone, 4xUSB3.0 (1 powered), 1 x MIcrophone, 1xS/PDIF, 1 x RJ-45 LAN

  This system seems to have the speed of treatment, a display resolution, drive options and the ports required for most everything that I have, but I'm interested to know if I forgot a required option or the best machine. \

  Thank you.

  Bill

  Bill, soft system, I'm jealous, but the only thing I don't like is the SSD Samsung EVO.  For applications started/is probably okay since you do not write much in the normal conditions of use, but the Evo have ugly writing real rate of my tests.  I have not tested the EVO m2 but the standard SATA III were so bad I returned them and got the PRO instead.

  Do you really need hard drive 1 TB?  Go completely SSD if you can.  Seriously consider the M.2 Samsung SM951, it has phenomenal performance see this forum post of mine for the fantastic read and write performance, several times the synthetic benchmarks are incredible, but with our intensive test disc first Pro BenchMark (PPBM ), I can write a chronology of the first 1500 MB/second!   Just don't waste it on the startup disk see if they can put the operating system on the other SSD

  f

  So for the first time, I found that it's handy to have your project and media on a plug T1 Samsung USB 3.0 flash drive, pull it out and instantly run on your computer in the studio.

• Need for clarification: recommended Configuration of maximum rates for NIC ports

  Ran across this KB 1020808 other one http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1020808of work.

  We build on a new data center. Hosts will be:

  • ESXi 4.1 U1 (latest version)
    
  • HP DL380 G7
    
  • 2 Xeon X 5690 3.46 GHz (hex core)
    
  • 192 GB of memory
    
  • 2 - NC522SFP 10GbE (two ports Netxen)
    
  • 2-8GB Fibre Channel
    

  I had planned to use to start 1 port on each card 10GbE and interfaces 1 GB 4 - Board. The article has a few numbers of modeling that concerns me because they all say 10GbE-4 or 2-10GbE cards and x number of 1 GB. There is not a mention of 4-10 GbE cards and also 1 GB.

  1. This allusion to only used 10GbE interfaces or interfaces that ESXi can see? I have no way to hide the unused interfaces of the OS.
     
  2. If referring to only used interfaces, I'd be in a 'public' setting if later, I decided to use all 4 10 GbE ports and 4 1GbE ports?
     
  3. I see the number of CPU/memory on the list and I was wondering if I'm supposed to extrapolate from that (i.e. I have 12 hearts and 192GO so, I should be able to support more of the graph.) Didn't know what this function would be?
     

  I would appreciate any clarification, so I understand that if I have some limitations or restrictions to consider.

  Personally I would only put VM Networking on the Nexus 1000v and perhaps vMotion. It is not supposed to put something else out there because they are related to high level functions of vSphere infrastructure. The Nexus is all about discount back control of your network to the network environment go ahead guys, if you don't mind losing this kind of control, but as I said the most relevant way to implement this is to your VM networks.

  I wouldn't put on Nexus one and probably management traffic no storage either if you've always dreamed of iSCSI. FT and vMotion you can probably up there without any problem.

  In a feet network with several uplinks in an Active all Hash IP configuration will give you a much higher throughput. See:

  http://KB.VMware.com/kb/1011966

  For the physical NETWORK card support information see:

  http://www.blueshiftblog.com/?p=148

  http://frankdenneman.nl/2010/07/load-based-teaming/

  If your configuration would differ somewhat from my original post because management would use two of the uplinks of 1 GB instead of a slice of the 10 GB ports. Configure the management in an Active configuration with two vmnic and use the default policy.

  Kind regards

  Paul