Modes of reentry

Similar Questions

• Two common examples of the same VI

  It never really occurred to me until now, but when you place the same vi on the front panel twice, are two instances of the vi created or is a vi just one copy of the other. I don't know if what I say makes sense but take a glance to my screws underneath, top level vi being 'Multiple Instance of the same VI.vi'

  The vi below is only an illustration as to what seems to happen in my vast program. Below my VI, I wonder are the two controls, access the same instance of the VI or have each their own instance control?

  Stroke

  Read this excellent summary of modes of reentry Altenbach wrote.

  http://forums.NI.com/T5/LabVIEW/re-entrant-modes/m-p/2007811#M660105

  The value of the node in your Subvi feedback will be shared between instances. Go to properties/run and activate re-entrant execution. Click on clone Preallocate for each instance.

• Preview.app stuck on the first page of the PDF in single page mode

  I regularly Preview.app view PDF files and want to use the "Single Page" function to display an entire page at one time. I have 'Single Page' display set as the default behavior.

  Lately when I open a PDF file, they properly open the first page, but I am unable to navigate to another page via the drop-down page, touch up/down arrow. If the PDF file has a table of contents, I am able to go beyond the first page through it and then proceed to navigate normally. If it is not a table of contents, the only solution is to continuous scrolling mode and continue to navigate beyond the first page.

  It's very annoying! Unfortunately, I can't remember where this started happening. It could be when I upgraded to MacOS Sierra, but I can't confirm.

  Everyone else see this behavior?

  Hold down the Option/ALT key, then use the cursor to the TOP or to the BOTTOM of the key.

• Absent portrait mode on iPhone 7plus?

  all the hype online for 'portrait' mode has been one of the main reasons that I opted for the more 7...

  However, the phone doesn't have this mode! Yes I use the latest version of iOS.

  I checked phones in the Apple Store and they did not either portrait mode.

  IT seems that they only in the States and not the Canada. Is there a reason for this?

  Can't find an answer anywhere as if nobody noticed?

  Help!

  Hello

  Portrait mode will be made available for iPhone 7 more users via a free software upgrade, later this year.

  This has not yet been published anywhere as a public release.

• Portrait mode on iPhone 7 +.

  Received my new 7 + yesterday and tried to find a way to take those portrait photos when the background is blurry.

  I found some tutorials and it just says to drag in portrait mode. My phone/camera doesn't have this option. I have the latest iOS update. Is there something that I need to activate?

  You are referring to the effect of depth of field.  This effect will be available with iOS 10.1, which is currently not quite yet.

  More information:

  http://www.MacRumors.com/2016/09/28/iPhone-7-plus-depth-of-field-photos/

• Activate App stuck on waiting and power Mode low does ' t

  Hi all

  I have at least two concurrent problems with my iPhone 6 + iOS 10.0.2 (but started with iOS 9).

  I can't install new application directly from the App Store on the phone because they were stuck in the phase of "pending". Same behavior of update of the applications that are already installed.

  The only way to update/install the app's iTunes download and synchronize.

  The other simultaneous problem is in what regards the activation of "low power mode" with the rocker switch (settings > farm > Low Power). Whenever I try to activate (manual or automatic 20% of battery) function, the gray toggle becoming in the Middle, then return to the OFF position.

  I already have backupped & restored several times, but nothing has changed.

  How can I solve this?

  Thank your

  Best regards

  Hello Axoduss,

  Thanks for posting in the communities of Support from Apple. I see that you have two problems. One is that the low power Mode is not activated, and the other is that updates and new applications are blocked pending. I know that I rely on my iPhone for everything. It is important to ensure that it works as expected. I'll be more than happy to help.

  Great job to the backup of your phone and restore. It's a great way to help solve these issues.

  If you are restoring from a backup, the problem may be in the back upward. I recommend to reset the phone to factory settings and set up like new to see if the Mode low power and installing apps works. If this does not work after the installation in the new and not after the restoration then you want to restore your data manually and not market back. Here is an article on setting up the phone as new:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Let us know if that helps.

  Take care!

• That the face is lit mode bedside table may be shortened? He remains too bright for too long

  That the face is lit mode bedside table may be shortened? He remains too bright for too long.

  Hello

  No, it is not currently possible to customize the duration for which the screen remains lit mode bedside table.

  If you want to send feedback or feature requests to Apple, you can do so here:

  https://www.Apple.com/feedback/watch.html

• After Malware that my login is disabled cannot start in safe mode

  Hi if anyone can help.

  A friend tried to watch movies online, I'm not sure of the site they visited, but were asked to install MacKeeper and I believe that they did, as I noticed it was to download and installed the following day and I asked them why they did this and they said it was the only way to watch movies!

  Anyway to cut a long story short my friend then called me to say they received a "pop" window to say that my computer has a virus and call a number of 1800... I told them to do nothing certainly not call the number and I would like to sort.

  So basically since then that then I can not connect to my main account at the start, the section where you type your password won't let me type into it and there is a symbol of the brand of 'question' next to it. If I hold my mouse over the question mark I get a dialog box stating "Please enter your password to iCloud as... as well as the date. I can only login as a guest and I cannot connect in 'safe' mode by holding down the SHIFT key.

  I deleted the MacKeeper Application (and also another OS player application that is newly installed the same day!) and empty the memory cache of my browsers and also now upgraded to 10.11.6

  I also run disk utilities, but still I'm getting this problem trying to connect to my main user account!

  I think that it is some kind of malware, does anyone have ideas how to solve at least the connection problem?

  If I could stamp out to see if there is any malware stuff going on behind the scenes it would be too great!

  All suggestions welcome.

  Thanks, Ciaran

  

  How did you uninstall the MacKeeper application? Please be as specific as possible, unless you have followed the steps, I suspect that your system has installed to uninstall. If this is the case then you will need to re-install and uninstall immediately by following the instructions of developers. Otherwise, the best thing to do is to do a wipe and installing OS X and then manually install your applications and restore your data from your Time Machine backup.

  I'm sure you probably learned to not let this 'friend' enter the 100' of your computer.

• Something is wrong! Start in safe mode, but it turns out that for Normal mode.

  Mac Mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Start drive Macintosh HD

  Iris 1536 MB Intel graphics card

  Monitor: DELL U2713HM, use the Apple adapter to connect to the Mac Mini

  I upgraded from Capitan in Sierra and got the problem that after I pressed the power button, the screen is full white. This problem has occurred on the Sierra, never happened in Capitan.

  I went to the Apple store today, they made a few diagnostic and found no problem. Everything is good. System is fine too. In the Apple store, they showed me to press SHIFT after I press the power button and it will start up the Mac in safe mode. They told me this can sometimes help fixing the boot issue. My Mac actually works very well in the Apple store. I tried the power and turned off twice in the store, and there is no problem. I am happy and come home.

  After I go home, I turn on my Mac, it always has the same problem before you go to the Apple store, after I pressed the power button, the screen is completely blank. So I tried to boot mode safe by pressing Shift and taking until I saw the Apple logo on the screen.

  After I log in, I checked my Mac mode, this is actually Normal mode!

  If I intended to power to the top of my Mac in safe mode but it turns out to be normal.

  If I do not press SHIFT and hold it pressed down after I turn on the power, I'll have just a white screen!

  It works very well in Apple store, but not in my own House.

  Anyone know what is happening?

  What is different between your system and the store? Have you taken your own keyboard & they were they that? If you use a bluetooth keyboard try using a wired USB one instead. Is this an original Apple keyboard?

  Do you have other devices connected? If you delete them.

  Please see the article below from Apple, it has information about starting in safe mode without keyboard (by setting a NVRAM variable). If you enter a work boot, you can put the mini in safe mode from there, via the command appears on this page...

  Try safe mode if your Mac does not end commissioning - Apple Support

  I would like to start trying to make another bootable OS disc - either an installation disc or a complete operating system to see if the Mac can be started OK to a different installation of OS - which indicates if the operating system or disk are part of your question, or if the material is simply unable to work correctly at all.

• The menu bar clock freezes after recovery from sleep mode

  After the upgrade to Sierra, I noticed that the clock in the menu bar (top right) show wrong time.  This occurs when the iMac comes out of his SLEEP.  When I hoover the pointer of the mouse on the clock, it would turn into a spinning ball (i.e. no response).  I have to disconnect and reconnect so that the clock in the menu bar to indicate the correct time.  She would continue to work until the next time that the iMac comes out of SLEEP.

  Anyone facing this problem?

  Have you tried booting in safe mode (hold down the SHIFT key at startup)? The problem persists?

  If you create a new user account, does?

• recovery iPhone 6s + not recognized mode on iTunes

  I had recently an iPhone 6s over someone and when I tried to put it into recovery mode to put in shape, I got an error (23, 14, I think.) Subsequently, the phone has been blocked in Recovery mode and cannot be updated. Now, it is not yet recognized by iTunes on my PC. Has anyone else got a happen to them? How can I solve this problem?

  What version of iTunes are you running? What version of Windows?

  You can solve specific errors here: get help with iOS update and restore errors - Apple Support

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• The output of the mode standby

  After a recent update of Windows 10, I am unable to use the mouse or the keyboard to wake the computer from sleep.  To resume the use of the computer, I now need to press the power button.  Before the update (from the same Windows 10), I had no problem using the mouse or the keyboard to wake from sleep mode.

  I am currently using Windows 10 on an iMac using bootcamp.  Have any other user experience also the same problem?  No useful solution would be much appreciated.  Thanks in advance.

  Please create a Windows system restore point and re - install the Bootcamp drivers and test.

• Watch OS shows 3 past mode of power with almost total of battery reserve

  Hello world

  I have a problem since I updated my watch to watch OS 3. Watch (series 1) goes into unexpected battery power with an almost total reserve mode. It produces one or two times a day and the only thing that I recognize that the watch remains black when I look at my wrist. It shows only the time in green numbers when I press a button and I need to reboot by pressing the two buttons. After the reboot, the watch displays + 80 or even 90 + % battery life and it works as expected for the rest of the day (if is not the same problem from happening again). Especially my battery is 50 + % at the end of the day.

  Today I reset the watch and recovered from backup, but that changed nothing. The watch went to the mode of power with a range of 78% a few minutes ago

  I am really frustrated because it happens very often and I could not find a solution to this problem. Decommissioning watch OS 2 is not an option...

  Thanks in advance for your help, I am really stuck on this issue.

  Best regards from Germany,

  Matthias

  Hi, Matthias

  If your dial of the Watch includes the complication of the battery, it is possible that accidental screen interactions are causing your issue.

  Tapping on the complication battery indicates the level of battery with a large button to put the watch mode of power reserve.

  You can consider using your watch for a while without this complication on the face of the watch to see if the issue is recurring:

  Change the face of the watch on your Apple Watch - Apple Support

• The closed display mode is no longer works after update of the Sierra on my MBPro. Known bug?

  I use a vertical dock for awhile, so my MBPro retina works in closed with external display, KB and mouse display mode.

  But since I installed the update of the Sierra, the external display not Mac OS desktop.

  It only works when I open the built-in screen...

  The bug is known? Or y at - it a setting to adjust on the Sierra?

  Thank you in advance

  Hi darklemon,

  I understand that, since the update to Mac OS Sierra, you've been unable to use your MacBook Pro in closed view. I know it's important to use your computer in a way that suits you, then I'm happy to help you.

  Let's start by resetting your memory NVRAM and SMC which can often help with system display and related issues:

  How to reset the NVRAM on your Mac - Apple Support
  Reset the management system (SCM) controller on your Mac - Apple Support

  Once you have done this, follow the steps here to set up the closed display mode:

  Use your Mac laptop to view closed with an external display - Apple Support

  Thank you for using communities Support from Apple. See you soon!