OfficeJet J4680c re - install

Similar Questions

• Special characters in my wpa password can be introduced to officejet J4680c

  I have an officejet j4680c all-in-one, but I don't have a computer at the moment so I use my wireless printer using the application mobile ePrint. Recently, I changed the password wpa, but it includes a dollar sign. When I entered that code is there something I'm missing to this character? Or do I have to change my password again?

  The sign $ is not one of the special characters available for the all-in-one Officejet J4680.  To get this connected device you will need to change this password again to include the characters available on the printer.

  Good luck.

• HP Officejet J3680 all-in-One: Officejet J3680 will install no software for Windows 10

  The complete software for the J3680 will not install on my new Acer Windows 10 PC (6 months). I don't have the codes error, but when undo them the installation process continues from referring to Windows 8 and I made sure that the software that I chose was supposed to be for Windows 10. I went through the entire process, including all the trouble shooting process, and yet it will not be installed. 3 hours ago and I'm not impressed. This same machine and software worked fine on my Windows 7 PC.

  Hi @rgslondon,

  Thank you for joining the HP Forums!

  I understand that your software HP Officejet J3680 will not install on Windows 10. And I'm happy to see it for you!

  Please, try the steps in this guide, "device installation failed" or "unknown device" message during Installation USB (Windows).

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• OfficeJet 5745: cannot install drivers

  I can't install the printer drivers for my 5745 Officejet on my laptop Dell XPS 13 running 64-bit Windows 10.  I tried the following:

  -Downloaded driver installation package later.

  -Wireless connection, I see my printer, but always, the installation fails with "installing network without success."

  -Connection via USB, but the installation of driver software does not see the printer (it comes as a fax in my devices and printers if I do this.  Note: my laptop has only USB 3.0 ports).

  -Deletion of printer, uninstalled all the software, rebooted and tried again but still does not work.

  -Add printer through "Devices and printers" in windows.  He sees the printer, but State indicates that 'the driver is unavailable.

  -After that, the printer appears in windows, device under 'WSD Print Provider' Manager, tried looking for and update driver through the Device Manager, but that fails as well.

  -J' updated the my computers drivers already.

  I don't know what else to try.  Any help would be greatly appreciated.

  Hi@HPToast,

  Thank you for the answer.

  Please follow the steps below to add the printer to the wireless network.

  First of all, make sure that the printer is connected to your wireless network and get the IP address of the printer from the printer by going to the address of Aipv4 Anetwork of installation configuration.

  Then, use the instructions below to set up the printer IP address wireless.

  1. Select "Start" and type "Advanced Print" in the search box.
  2. Choose 'Advanced Printer Configuration '.
  3. Select 'the printer that I want isn't listed .
  4. Select 'Add a printer using a TCP/IP address or hostname' and then 'Next '.
  5. Select "TCP/IP device" from the list 'type of device'.
  6. Type the host name or the IP address of the printer. Choose 'Next '.
  7. Windows should find the printer if the printer is turned on and configured correctly. You may need to specify more information. If you are prompted, select the type of network adapter installed in the printer drop down list 'Type of device'. You can also click on "custom" to specify a custom settings for the network printer. Choose 'Next '.

  Note: Do not check the box that says 'queries the printer and automatically select the driver to use.

  Windows you will now walk through the installation of the drivers for the printer. After it's over, you should be able to print to the printer via direct IP address.

  Please update the State.

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• HP officejet 7510: problem install hp officejet 7510

  I just bought it, stay in the University hostel, use the wifi from the University, try to install the software but can't.

  Hi @SC19CHEN,

  Thank you for joining the HP Forums!

  I understand that you can not install your HP Officejet 7510 with wireless connection of your University. I'm happy to help you!

  Most universities and colleges have a block on their routers for the installation of printers. If you were able to connect, and that someone else had the same password wireless, this person could potentially print on your printer if they connected as well.

  The best options I have for you is to try to install with a Wi-Fi Direct connection, either or using a . of the USB 2.0 printer cable

  You want to make sure that the printer can print a test page without using a computer first. Printing of Pages of Self Test.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• HP Officejet 4630: Problem installing HP Officejet 4630

  Hello

  I hope someone in these forums can help me get my printer to work.  I currently have a HP Officejet 4630 who can no longer printer from my computer Windows 10, and I don't know why.  I first had the problem when I upgraded my old computer to 10 Windows, the computer sees the printer, but when it will install the drivers, it says that it cannot connect to the printer wirelessly or wired.  I can print to the printer from mobile devices (iPhone, iPad) simply not my main computer.  I have an older model HP Envy 120 that I can view and print for just fine, but it is my printer to work and I prefer not to use it for day to day general printing which is not a related work.  I think that it is a firewall problem, but to be honest, I don't know how, or what are the changes that I need to check if this is the problem.  When I look at the printer in printers and driver section, it says that the printer is not available and that no drivers are loaded to the printer.  I know that I need drivers, but continuous HP told me no printer is installed and custom install drivers for it.  Help, please

  Dan

  Hello

  Thanks for the comments.

  Are able to disable the firewall during installation?

  Here are some troubleshooting wireless;
  
  Troubleshoot wireless
  1. make sure that the printer is not connected to the network via an Ethernet cable
  Wireless does not work if the printer is connected to the network via an Ethernet cable. Unplug it
  Ethernet cable from the printer.
  1. make sure that the wireless light is on
  If the blue light on the printer control panel is not lit, wireless can be disabled. To turn on the radio, touch
  or drag to the bottom of the tab at the top of a screen to open the dashboard, and then tap (wireless), touch
  (Settings). Tap Settings wireless and then tap wireless to activate it.
  If the blue wireless light is flashing, it means that the printer is not connected to a network. Use the wireless configuration
  Wizard available from the Control Panel printer to establish a wireless connection. Touch or drag to the bottom of the tab to
  the top of a screen to open the dashboard and then tap (wireless), press (settings). Touch wireless
  Settings, tap the wireless configuration wizard, and then follow the instructions on the screen.
  1. make sure that the computer or mobile device is connected to the wireless network
  Make sure that your computer or mobile device is connected to your wireless network. If you cannot connect the
  computer on the network, contact the person who set up your network or the router manufacturer. It could be
  be a hardware problem with the router or computer.
  1. reboot the wireless network components
  Turn off the router and the printer and then turn them back on in this order: router first, and then click Printers.
  Sometimes, disabling devices and then turn their back on helping solve the problems of network communication.
  If you still can not connect, turn off the router, the printer and the computer and then turn them back on in this
  order: router first, then printer and computer
  
  Still problems? Visit the HP (www.hp.com/go/wirelessprinting) wireless printing Center. This Web site
  contains more complete information and up to date on wireless printing, as well as information to help you
  Prepare your wireless network; solve problems when connecting the printer to the wireless network. and solve
  problems of security software.
  Note: If you use a computer running Windows, you can use the tool HP Print and Scan doctor, which can help
  solve many problems, you may have with the printer. To download this tool, visit www.hp.com/go/tools.
  
  Hope that helps.

• HP OfficeJet 4650: Problems installing driver HP OfficeJet 4650

  I can not scan with my printer. I tried to install the driver HP several times. Each time it is said that it has installed successfully.

  When I add the printer to the list on printing & scanning in system preferences, it finds the printer (because it is attached to my computer via a USB cable) but in the ' using Print:' section, automatically selects the generic printer PCL. HP OfficeJet 4650 isn't in the drop-down menu to select in this section. This means that there is a problem with the driver installation?

  I tried to uninstall the software, but I can't uninstall it, suggesting that it has not been correctly installed in the first place.

  What can I do?

  Hey @HPURCELL,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your machine of Mac OS x 10.7 printing to your 4650 e-all-in-one printer Officejet. What is happening is that the printer drivers have been installed for Mac OS x 10.8 or later. The installation program is running, but the Mac printer does not communicate. To scan, you will need to upgrade to Mac OS x 10.8 or later version.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet 7400 series: installing software HP all-in-one cancels before the end

  After the upgrade to Windows 10, my HP OfficeJet 7400 (wireless) series has lost the ability to analyze.  The HP Solution Center responds with the message "cannot run because your installation of the device is not complete.  I ran printing HP and doctor Scan and it said that "the complete office solution for your product is not installed on this computer" (even though it worked fine w/Windows 7 before the upgrade).  Continuing through the stages of printing and doctor Scan, you are prompted to install the software all-in-one series I initiative.  He gets successfully to the menu of Options of Installation of revision.  I check out the review and accept the check box and click Next.  At this point, it passes to the "prepare the system for the installation" and for the briefest of moments he says software removal.  But then the operation will stop and the program ends without having to install the software and drivers.  I found a log file pushing files and shows that I am an ERROR_INSTALL_USEREXIT 1602 - the user cancels the installation.

  Although my situation seems to be a bit different that other issues addressed in the forums of HP, I've tried every fix suggested in those and nothing works.   I also downloaded Windows Scan and scan HP and Capture and cannot find my scanner.  The print function, however, works with the supplied Windows 10 driver.

  Any thoughts?  Thank you!

  Hello @Bill_M1,

  This is a great place to visit for a community support and HP! I see that you are not able to scan and you encounter problems during installation. Thank you for providing all of the steps that you have already tried. I wish I could help you.

  I would uninstall the old printer drivers Windows 7 install and reinstall the most recent drivers.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.

  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  Here is the driver: Full_Webpack - 140.0.408 - 5-AIO_CDB_FSW_Full_Win_WW_140_408 - 5.exe

  How is the printer connected?

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• OfficeJet 6230: After installing Windows 10 printer does not work

  I installed Windows 10 yesterday and now my HP Officejet 6230 does not work. First there was the message "print head problem. After going through steps to correct the problem, control list shows all green checks but does not always print and now I get the message that my printer has a serious problem. I had this printer less than a year. Help, please.

  Hi, thanks for your comments. Please contact the support. Thank you.

• All-in-one HP Officejet 5610: cannot install HP Deskjet and Officejet full feature software and drivers

  I downloaded AIO_CDB_NonNet_Full_Win_WW_130_141.exe to install the printer HP Deskjet and Officejet full feature software and drivers, but encountered errors verifying system requirements. The dialog box said:

  

  How can I resolve this installation issue? Can already print to the printer, I would like to install HP Solutions Center to use other functions like scanning.

  Hello

  Pelase follow the thread that I posted below to rename the utility Check Intel USB and then try to install the software:

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/D110-fails-to-install-on-Windows-7-no-USB-harware-found/m-p/5612495/highlight/true#M85778

  Shlomi

• OfficeJet 6310: Difficulties installing my OfficeJet 6310

  I tried to uninstall my HP Officejet using IObit Uninstaller, and that seemed to work. However when I go to reinstall from my HP for Vista disk, it shows the program is still installed, but will not uninstall and will not re - install the program.

  I can find no trace of the printer program on my computer, but there is obviously some kind of ghost program.

  Can anyone help?

  See you soon,.

  Adrian

  Hi again,

  Well, everything seemed to install correctly, but then after putting the print and connect the usb cable, it brassèrent away for several minutes but then gave me a large red cross.

  When I clicked on 'help' I got the following message:

  1. check that the device is connected to your computer and turned on.  "Click on the"

  2. If the device installation program does not complete, some hidden configuration commands will be over.  "Click on the"

  3. If the problem persists, see the troubleshooting section in the Readme file, located on the CD-ROM.

  By clicking on 'back' did not help at all, any more than the HP help files.

  Any additional help?

  See you soon,.

  Adrian

• OfficeJet 6000 software install problem

  Hi all

  I have messaged HP about this problem but I was wondering if someone here could help.

  I just bought an Officejet 6000 as the title. I have installed the software network no problem at all on 3 laptops running Vista, 1 PC under XP and 3 PC running Windows 7.

  But in general on MY laptop the software will not be installed:

  Setup gets to step 2 and said that it has detected old software, it then crosses on uninstall process and restart the computer to restart Setup starts again comes to the phase 2 says that it has detected older software uninstalls, restarts the computer... and it continues indefinitely.

  -There is no HP software in Add/Remove programs on the computer

  -J' tried HP scrubbers, the base receives to step 4/5 61% and morality, we get to step 6/11 46% (I think) and then it's there, I left these two running overnight.

  -J' had the Virus software, firewall and pop-up blockers

  Any help will be very much appreciated, as my knowledge that a user is advanced, but I am not a professional.

  Provisionally pending aid

  Andy

  !!! SORT!

  After a few more bother I managed to get the printer to show that it is auto in the control panel network and installed this way... oh so happy

• OfficeJet Pro 8610: Install the HP software

  Hello!

  I have a HP Officejet Pro 8600 and a HP Officejet Pro 8610; When connected to my wireless router.

  I have a new laptop Lenovo with 10 windows and I want to know if I need to install two (8600 and 8610) Officejet software under Windows (to print and scan) or if the installation of the will (most recent) software only Officejet 8610 let me print and scan on both devices (8600 and 8610)? I also use the "scan-to-network-folder" on both devices.

  Thank you.

  Hello

  You need to install the software and drivers for both and you can select the default (primary) and the other as secondary.

  Kind regards.

• OfficeJet 7410 Driver Install on Windows Mobile 8.1

  I'm trying to install the HP OfficeJet 7410 all-in-one printer driver.   I downloaded the HP Printer Wizard, the printer has detected and started the installation.    I also ran printing HP and doctor scan which has also detected the printer (in a network) and started the installation.   These two tools, download and run the installation package AIO_CDA_FSW_Full_Win_WW_140_408-5.   This is the process fails.   The software is installed, and then seeks to determine the printer - my printer is connected to the network via ethernet.   When the software does not find the printer, I restart the scan, it fails.  Finally, I wonder if I want to enter the IP (192.168.0.102), and I re - search for the printer.  Saying the direct IP address software does not work, he doesn't know how to find the printer.   I can ping, I can access the printer web page, the PC can connect to the printer and find, the installation of driver software does not work.   To reconfigure the printer and the laptop to use it wireless to repeat the search - always the software can't find the printer, so do not install the print driver or the installation of the software.   If I run the HP Solution Center, it will fail, telling me to set up the printer.   I went through this process as well - he too fails to find the printer.

  How can I get the software to recognize the printer so that the installation may complete and I can use the scanner/printer/etc. ?

  Hello

  Download and install the following software:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  Please let me know how it goes,

  Shlomi

• HP Officejet 6500 a: new Windows 10 laptop - how to get HP Officejet 6500 has installed

  I have a new Windows 10 laptop. I need to install the software for our existing HP Officejet 6500 (E710) has on the new laptop computer. What/where/how can I do this? Thank you.

  @buzz4_nt

  HP Officejet 6500 a Plus/Plus e-All-in-One special edition - complete E710s of software features and the driver

  http://ftp.HP.com/pub/softlib/software12/COL34830/MP-109384-3/OJ6500_E710n-z_1315-1.exe

  HP printer install wizard for Windows

  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  HP Print and Scan Doctor for Windows

  http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-4/HPPSdr.exe

  REO