Modifying the time dimension - the shift cuts

Similar Questions

• When I click on the shortcut it does not open firefox but if I hold the cursor on the short cut it shows tabs from last time, but not open them

  But if I hold the cursor on the short cut, that it shows the last tab and how many pages come from my last visit, but will not open them no matter how many times I click it

  If you think that your Firefox window can be "off-screen" somewhere, what happens sometimes to certain users, this discussion has a few things to heal that: when I go to open firefox it appears on my toolbar, but not on my screen where it is?

• Experience hung sessions several times during my shift on a connection to the local network on a work computer.

  Original title: Wireless LAN vs

  I work from home and I have to hard wire from my computer in the network. I've known sessions hung several times during my shift. I've done a tracert and find RTO on several sections (4-5-7-8) using the address of network www.newcorp.com however, when the key tracert is done using www.verizon.com is without interruption. Finally when www.google serves OTN occurs on hop 4. This happened about a week now. Service COMPUTER may doesn't seem to help and I do not seem to speak a language Verizon (my ISP) includes. So I have to go it alone. I noticed that in network connections.

  Bluetooth network connection is disabled

  LAC2 is not enabled

  LAKE and wireless network connection are enabled is there something in what could be the problem? I am just not sure what to do. I was call our helpline every day or just restart my computer several times (5-9) during an 8 hour shift. Can someone identify using my limited knowledge with what I described?

  GE

  The road that you are affected depends on your ISP.

  Please download this app from the
  Run it
  Download output to a drive or any file sharing service
  Put a link to them in your next post
  Please enter each of them in a command prompt high after you run the above and save the file

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  NETSH winsock reset catalog

  NETSH int ipv4 reset reset.log

  NETSH int ipv6 reset reset.log

  Output

• Time Dimension type to different values in the attributes - Bug or feature?

  Not sure if this is a bug or a feature.
  
  But if there is a time dimension hierarchies. You have the option of specifying different values for member attributes in different hierarchies.
  
  For example.
  
  A hierarchy has MIN_ID for its members and uses MIN_END_DATE for its end_date
  
  Hierarchy B has MIN_ID for its members and uses SESS_END_DATE for its end_date
  
  According to this message and a comment by David Greenfield:
  
  Gender issue when several mappings for different hierarchies
  
  "You try to map the same attribute, SORT, on different columns in two hierarchies? In other words, what do you expect the same Member to have different values for the attribute in the two different hierarchies? If so, then this is a problem because a member must have the same value for the attribute independently of the hierarchy. »
  
  Unlike a dimension of the user, a time dimension seems to allow this and it seems to work as expected. Behavior in this case is the difference between a user and the time dimension?

  Your description of the structure of the dimension is very clear, but I have a question about system requirements. When you say you want to the time running from 17:00 to 16:59, do you mean that the calculation must spand day? for example "5:00 PM: Jan 1, 2012" to "4:59 PM: 2 Jan 2012".» If so, then this you is impossible by making a loop only the dimension of time-seconds. Or do you really mean it must wrap around the same day. for example "5:00 PM: Jan 1, 2012" at "11:59 PM: 1 Jan 2012", then again to "00:00 AM: 1 Jan 2012" to "4:59 PM: 1 Jan 2012"?»»»

  If you want the calculation for the period of days, then I think you need to spend TIME on the DATE dimension level. You can leave some MINUTES in the second dimension, which can be a dimension of standard user. You must then two levels of the DAY (with different members) in the date dimension - each with a different set of the child. You can assign the TIME_SPAN to the TIME level 1.

• Best practices for the Time Dimension

  I'm a new contour design. I need to set up a time for daily dimension, perpetually. In the past I would set up a member years i.e. 2010, 2011, 2012... and a second dimension with the days i.e. Jan 01, 02 Jan.
  
  Is there a better way than that? I would like if possible do so in only one dimension.

  Have you looked at the Date-Time dimension? It's ASO-only, but has a ton of features:
  http://download.Oracle.com/docs/CD/E12825_01/EPM.111/eashelp/frameset.htm?sel_cal_hier.htm

  He put everything in a single dimension, btw. I've seen similar dimensions in cubes BSO stored in sparse form. Shudder.

  Kind regards

  Cameron Lackpour

• Hour/Min column in the Time Dimension

  Please can someone help me with the script to fill in the time Dimension Table that contains a column of hours/min. Here's my Time_D structure:
  
  Year
  Quarter
  Month
  Name of the month
  Week
  Day
  Hour
  Min
  
  Also is it a good practice to have the hour/Min column in the time Dimension?
  
  
  Thanks in advance.
  Concerning
  B

  B,
  Sorry if I confused things a bit...
  I wanted to say in the MDB layer, you can model a dimension table (time) with the path complete drill (year-> quarter-> month-> day-> hour-> Min)
  This a logical table would have two sources of logical table to map required fields of your two tables of phyiscal (Date_Dim and Time_Dim)
  You must define the levels of content accordingly for each logical table source, so the user in responses can perfectly break of the year all the way up to Min, their sound a single dimension, actually its two tables and the BI server switches according to the levels of content in the LTS.

  Sorted?
  Let us know if you get the probs.
  Alastair

• Add the quarter to the time dimension

  Hello
  
  We have created a time dimension using the owb wizzard, but did not include the quarter level. Is it possible to add it to the dimension later without deleting a re-creation of the entire dimension?
  A new time dimension would probably be corrupt all the cubes (data and metadata), so I would avoid that.
  Any ideas?
  
  See you soon,.
  
  Knut

  Hi Knut

  Yep, should be possible.

  Change the dimension and select the quarter level in the levels Panel, and then click quarter in hierarchies pane to add it to the hierarchy. You can then delete the link and autobind on details for the physical links to the underlying table. On the hierarchies pane, there is a button "Create map" that will regenerate the mapping to load the time dimension.

  See you soon
  David

• 1 h period and the time dimension

  Hi all
  
  1. I'm new to OWB and I was wondering is it possible to force the default time dimension (done using Wizard) to have some 'small' level then a day (say, 1 h)?
  If this is not the case, have you tried to manually update the dimension and mapping?
  Or it is better to leave default dimension and start with my own time dim?
  
  2. What is the difference between the dimension created as the dimension "time" and with a similar but defined content as typicall dim? (issues / analysis performance)?
  
  Thanks in advance.
  See you soon,.
  B

  Hello

  OWB can create dimensions date to the level of the day.
  You can use this dimension as a source of a map of your own to create a time dimension to the level of the time (enclose it with values of 1-24).

  Have you considered using a date on the day level dimension and a second dimesion of time containing only 1-24 hours?

  With the help of the wizard makes living easier, but there is no advantage in terms of performance in relation to a normal size. Be sure to add all the clues you need.

  Kind regards
  Carsten.

• How to create the time dimension?

  Hi friends...
  I'm working on OBIEE since the last 2 months.
  I created a few reports; I don't have the time dimensions in the layer of MDB.
  
  Now, I need to give a few zoom feature in my reports. Almost all of the reports have the time factor.
  As year, month, and day. can I still create the time dimension based on the exercise.
  (1) what is - that I think give the zoom feature in the reports.
  (2) can we have multiple time dimensions in the MDB layer?
  
  
  Thank you very much in advance.

  Toony,

  You can create a time dimension based on the fiscal year, and you can have many dimensions of time within a business model. There is a lot of documentation, of messages and articles about dimensions. If you haven't already done so, check out page 126 of the Server Management Guide and read this article. That should at least help you get started on building your time dimension.

• To display the Panel of the accordion and to modify the text inside at the same time, is it possible?

  What I want to do is change the text on the component - button, which is in a container - accordion, but I always fail at first, flex reports error "null." I'm clear on the reason, because I have never
  initialize that accordion, but hopefully show the accordion panel and modify the text
  Furthermore, is it possible?
  It will be appreciated any suggestions in this regard.
  

  "augur_guan" wrote in message
  News:g7uoo9$c7r$1@forums. Macromedia.com...
  > What I want to do is change the text on the component - button, which
  > is in
  > a container - accordion, but I always fail at first, flex reports
  > "null" error. I'm clear on the reason, because I have never
  > initialize the accordion, but hopefully show the accordion panel and change
  > the
  > text to
  > also, is it possible?
  > It will be appreciated any suggestions in this regard.

  If you don't care startup performance, you can set the creationPolicy
  on the accordion at all. Otherwise, you can try either using a test
  (like creationComplete on the button) or use data binding to 'pull' data
  in the button once it is initialized.

  HTH;

  Amy

• using the shift button, how can IM I stop the menu pop-up brush

  I use the shift to straight lines cutting out (erasing) Details on layers in photoshop cs5 how stop the brush menu popping up, it drives me crazy!

  Hello

  Generally, you should not do like that.

  Can you please try reset tool

  To reset a tool, you must first have the selected tool. Then Ctrl-click (Windows users: right click) the button tool preset in the Tool Options bar.

  

  When you click this button, you will see a small menu and you can select Tool Reset to reset the current tool to its default value or reset all tools to deliver all the tools to its default value. Once selected, the tool will act as the first time you have used it.

  

  Try to do it, let us know if it works

  Concerning

  Jitendra

• I can't connect to my mac because the SHIFT key is down. Then he showed the top letter and can not connect... The mac is also overheating. I went to the apple store and they said that they cannot fix and need to send to the factory. Connection of same slo

  I just used my mac. I bought it on January 2014.

  A few months ago I couldn't connect to my mac more. There is nothing special on my mac to record.

  He was showing the wrong password when I tried to connect to my mac. It is overheating sometimes without help.

  So, I brought it to the apple store and they said that the shift key is down and therefore superior letter is all the time. and they could not help me open on the inside. Apple store guys suggested me to display somewhere or send it to the factory.

  My question is

  (1) what should I do

  (2) if I send to the factory or should go to the repair shop.

  you guys have an idea what the problem with my mac?

  I suggest you send to the factory, or if you have an apple authorized dealer / repair shop to fix the SHIFT key first, then a glance as to why the fan is still running hot.

  Maybe something has damaged the keyboard (shift key) area and also the fan internal.

  You can't have something special on the computer, but I'd always spend extra money to repair.

  The sooner, the better.

  If you need take photos or documents off the power the computer have you tried to connect an external keyboard to type your password?

• Web development Toolbox prevents me from using the letter upercase, special characters and all that requires the use of the SHIFT key. Help.

  whenever I press the SHIFT key, the web development Toolbox opens. I am unable to use the letter upercase, special characters and everything that requires the SHIFT key. It's really annoying me... i can't even use an exclamation mark111111

  The sounds you have a sticky key which is in the pressed state.

  Do you mean the box tools that should open via Ctrl + Shift + K or open more to the Toolbox that is displayed via Ctrl + F2?

  Try to press the keys involved several times, see the Web Developer menu for the shortcut keys.

  Have you tried to close and restart Firefox or restart the computer?

• Satellite Pro M40: computer stops when you press the SHIFT key

  Sometimes when I press the shift key it wonder if I want to shut down the computer. It also changes the internet Explorer mode in full screen. When it arrives it will be continually for centuries and then suddenly stop. Then start again. It seems not to happen at any given time. I disabled the hot key in the Toshiba utility and which comes to the top of the Tower stops when I pressed the SHIFT key, it does not give me the option.
  It's really annoys me because I can't just think what to do.

  Thank you

  Hello

  It's very strange. It is the first time I heard about this issue.
  As much as I know the Toshiba utility cannot add additional functions to shift and make this key as a stop button.
  I have gift? don't know if you have installed the 3rd party applications that can change the keyboard feature, but you should check this possibility.

  In addition can also be a defective hardware. Maybe something wrong with the keyboard controller. But of course the diagnostic test is necessary.

• problem with the shift register

  for purposes of simplicity, I remove code without problems

  Description:
  1. my state machines, for some reason, a lot of cases.
  2. the order of each case may not change.
  3. the main prupose is to get the difference as on the front panel
  4. prior to entry difference, I first is measured in the case where 2 and TRY using shift register to pass data, ideally at least 5
  5. However, the "previous" value is updated too soon, unlike 'get' is always ZERO.

  for example
  You can see the shift register on the left side has two components, ideally, the 'get' difference should display 2-0 = 2.
  However, given that the second element of the registry team updates too early, my objective cannot reach and meet up with ALWAYS 0

  I think it's my misuse of the shift register for the computer to several cases.

  I pasted this problem for 4 hours... kind of stupid, but could not understand

  in a mulit-case state machine, how to properly passes data to the case (5 in this example) INSTRUCTION to ensure that I get the correct calculation

  GOLD: because I am only looking to the current value and the previous value, are there other ways to get this problem is?

  Thank you

  It is a case where execution highlighting can be helpful. Turn on execution highlighting by clicking the light bulb on the block diagram toolbar. Then, run the VI.  You will see the left side of the team to register the change as the state machine goes through States 3 and 4.  At the time where what happens to 5, all data in the change record is identical.

  One of them might be to use two registers to offset, one for the current value and the other for the previous value.

  Lynn